Hailea HC-150A, water chiller, flow rate 250 to 1200 L/h

Maintaining a constant nutrient solution temperature within optimal ranges in hydroponic systems (NFT and DWC) is extremely important for preserving oxygen levels and protecting the roots from pythium* and other diseases.

With the Hailea HC-150A chiller, 250 - 1200 L/h, controlling the water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
•  R134a refrigerant
• low noise levels
• easy-to-use digital controller
• automatic overheat protection shut-off function
• for tank / aquarium with a volume of: 150 L

The chiller is designed to operate with a water pump with a flow rate of 1000 L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-150A
• recommended flow rate: 250 - 1200 L/h
• for tank / aquarium with a volume of: 150 L
• fittings: ⌀ 12 or ⌀ 17 mm (included)
• power: 1/10 HP 
• power consumption: 170 W
• current: 220-240V, 50Hz
• amperage: 1.1A
• dimensions: 420 x 248 x 365 mm
• weight: 15.0 kg
• warranty: 1 year

Recommendations: The cooler should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Clean according to the appliance instructions. Be sure to also place an air circulation fan near the chiller to prevent heat buildup.

Please note:

1. The flow rate is determined by the pump's maximum output (submersible pump or other external power filter) and the circulation equipment.
2. The cooling performance test is shown when the ambient temperature is 30°C, the water temperature before cooling is 28°C, the set temperature is 16°C, and the volume of water being cooled is no more than 150 liters. As the water cooling capacity decreases, the water temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter, and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use other alternatives to avoid affecting the unit's performance.
4. When a room does not have sufficient air exchange, cooling efficiency decreases if the ambient temperature rises due to heat from the unit.

Cooling capacity sizing

The stated flow rate in L/h refers to circulation through the unit. Cooling also depends on volume, ambient temperature, and heat load. Ensure adequate ventilation and use a compatible water pump.

Browse water chillers.