AutoPot systems, modules, and spare parts

Square root-control disc, 196 × 196 mm.

Product details

Root disc - root discs are placed in the tray beneath each pot, with the gold side facing up. Root discs prevent roots from growing out of the pots.

AutoPot compatibility

Match the component to the specific generation of the system. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

The AutoPot AQUAvalve is a mechanical valve that uses gravity to feed water from a reservoir to an irrigation tray.

Features and purpose

• It opens the water supply until the water reaches a level of about 20 mm, then closes it until the water in the tray has been used.
• No electric pump or timer is needed for gravity-fed operation.
• This is an AQUAvalve. Do not assume it is an AQUAvalve5 without checking the model and connection.

Keep the valve and tray clean. When replacing the valve, check the hose diameter and compatibility with the tray.

AutoPot compatibility

Match the component to the specific generation of the system. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the newer valve.

Browse AutoPot systems and parts.

These splitters are ideal for reducing from 13mm tubing to 4mm tubing when using large systems. They are inserted inline at the point where the AQUAvalve valve or aquaPot is located. They provide a watertight connection, unlike many other types of reducing fittings.

The cross fitting connects four sections of the line.

AutoPot compatibility

Match the component to the specific system generation. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

AutoPot reducing adapter with filter, 13 to 4 mm.

AutoPot compatibility

Match the component to the specific system generation. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

AutoPot, 4 mm hose, 1 m.

Compatibility with AutoPot

Choose the component to match the specific system generation. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

AutoPot Marix Disc, black square disc, 186 × 186 mm.

Product details

• Marix disc
• Prevents soil/compost from escaping the pots and entering the irrigation system.

AutoPot compatibility

Match the component to the specific generation of the system. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

A key component in the easy2GO kit. The cover for the AutoPot AQUAvalve valve, used together with the AQUAvalve valve, allows growers to create their own basic but highly effective hobby system.

All you need is a flat tray of any shape or size. The user then simply places the AQUAvalve valve in the tray and puts the cover for the AutoPot AQUAvalve valve over it. The cover is made from a heavy composite material, so there is no need to place any weight on it to hold it in place. Then simply connect the AQUAvalve valve to a reservoir using 6 mm tubing and a filter. Make sure the pot holds at least 5 liters. If you use small pots, you risk drowning the plants. A small plant in a small pot will not appreciate sitting in deep water, as its root system will not be able to breathe. Naturally, this does not apply to marsh plants or carnivorous plants. If you intend to grow carnivorous plants using this method, please make sure to use rainwater only.

AutoPot compatibility

Match the component to the specific system generation. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

AutoPot AirDome Pack is a kit for supplying air to the bottom of a pot.

Features and use

• Place it in the pot before filling it with substrate.
• It must be connected to an air pump to operate. The dome itself does not produce air.

Check the contents for the required tubing and connectors. Choose an air pump separately if it is not explicitly included in the offer.

Compatibility with AutoPot

Choose the component to match the specific system generation. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

AutoPot PotSock Square, root protection for 8.5 and 15 L pots.

Product details

PotSocks are designed to prevent the root system from growing out of the pot and interfering with the normal operation of your AQUAvalve valve. 

Suitable for easy2grow or 1Pot Module.

AutoPot compatibility

Match the component to the specific generation of the system. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

AutoPot, 13 mm triple connector.

Product details

The AutoPot 13 mm triple connector is simply used to connect three pieces of 13 mm pipe (hose) together. Double-barbed for higher pressures.

The triple fitting connects three sections of the line and allows you to create a branch.

AutoPot compatibility

Match the component to the specific system generation. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

AutoPot Compatibility

Match the component to the specific system generation. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

AutoPot, 6 mm sealing ring.

Product details

Sealing ring for bucket/reservoir. 

Smooth walls for easy installation.

6 mm opening

AutoPot compatibility

Match the component to the specific system generation. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

• Replacement tray with cover for AutoPot easy2grow modules and systems. The tray is suitable for an 8.5-liter or 15-liter square pot.
• The tray requires an AutoPot AQUAvalve valve to be part of a complete system.
• We recommend using a PotSock- Square at the base of the pots to prevent the roots from interfering with the operation of the AutoPot AQUAvalve valve.
• Color: black.

AutoPot compatibility

Make sure the component matches the specific system generation. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

The AutoPot easy2grow 8.5 L Extension Kit includes:

• 2x 8.5 L pots
• 2x Marix discs - place one Marix disc in each pot to prevent soil / compost from escaping the pots
• 2x Root discs - place the root discs in the tray under each pot, with the gold side facing up. The root discs prevent roots from growing out of the pots and discourage them from growing toward the AQUAvalve valve.
• 1x AQUAvalve valve
• 1x 1 m tube
• 1x 6 mm T-connector for easy connection to the easy2grow kit or existing systems.

The easy2grow system is AutoPot's best-selling irrigation system, offering hassle-free growing in a greenhouse, polytunnel, garden or home, without wasting a drop of water. Easy2grow uses the AQUAvalve valve to supply water and feed your plants using 8.5-litre pots, without the need for pumps, timers or electricity. It provides fully automated delivery of water and nutrients, with a built-in wet/dry cycle to mimic natural systems. Whether you use a single easy2grow system or multiple easy2grow extensions on a large commercial scale, this system provides everything your plants need. Easy2grow can be used as a hydroponic system or with a growing medium/substrate of your choice. The standard pot size used with the easy2grow system is 8.5 litres. If you need something a little bigger to meet your growing needs, choose the "Large" option and increase your pot size to 15 litres.

Any plant substrate can be used with the easy2grow system, whether traditional soil or hydroponic. Requiring minimal maintenance, reliable and automated, the easy2grow system lets gardeners relax, go away for the weekend and feel confident that their plants will stay healthy and their harvest abundant.

The easy2grow system is easy to expand, as many pots can be connected to one reservoir. Please see examples of typical layouts using 6mm or 16mm tubing*. The pots and trays can easily be moved as needed; if the plants get too big, they can be spaced farther apart with ease. Once set up and the reservoir is filled with water and nutrients, this highly versatile system will take care of all your needs.

Tip: Always use a 6mm or 16mm filter with every reservoir. Use quality compost, soil or coco with a 30-50% mix of perlite.

AutoPot compatibility

Make sure the component matches the specific generation of the system. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

AutoPot, water reservoir tap.

AutoPot compatibility

Choose a component compatible with the specific system generation. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

AutoPot, single 8.5 L pot module.

Module for expanding an AutoPot irrigation system supplied with water from a reservoir.

AutoPot compatibility

Match the component to the specific system generation. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

AutoPot, 13 mm inline filter.

Product details

• Standard inline filter for all AutoPot systems.
• Filters water from the reservoir before it reaches the irrigation system.
• Suitable for all FlexiTank sizes.
• An essential component for all irrigation systems.

AutoPot compatibility

Make sure the component is compatible with the specific system generation. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

AutoPot, 13 mm irrigation hose end cap.

Product details

13 mm end cap for AutoPot is used to close off the water supply line when using 13 mm tubing (hose).

The end cap closes the end of a compatible line. Check the seal by running a test flow of water.

AutoPot compatibility

Choose the component to match the specific generation of your system. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

AutoPot AirDome, dome only, is a replacement aeration component for the base of a pot.

Features and purpose

• This offer is for the dome, not a complete AirDome Pack or AutoPot system.
• Compatible air connections and an air pump are required for operation.

AutoPot compatibility

Make sure the component matches the specific system generation. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

AutoPot, 15 L replacement pot.

Product details

• 15-liter pot for use in AutoPot easy2grow systems, as well as 1Pot modules and systems. 
• We recommend using PotSock- Square at the bottom of the pots to prevent the roots from disrupting the operation of the AutoPot AQUAvalve valve.

This is a replacement pot. The valve, tray, and reservoir are selected separately unless they are included in a clearly specified kit.

AutoPot compatibility

Make sure the component matches the specific generation of the system. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

AutoPot, 6 mm filter for 30 and 47 L reservoirs.

AutoPot compatibility

Make sure the component is compatible with the specific generation of the system. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

The 13mm shut-off tap for AutoPot is a very useful accessory. It can be added at the end of the layout when using a hose (13mm pipe). You can open the tap to flush the lines, removing sediment or limescale buildup that may occur over time. This takes only a few minutes and should be done once every few weeks.

The tap allows you to manually stop the supply to the relevant branch of the line.

AutoPot compatibility

Make sure the component matches the specific system generation. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

The AutoPot 1Pot Accessory Pack is an original set of replacement and expansion components for AutoPot 1Pot systems with a 6 mm tubing system. The kit includes the new-generation AQUAvalve5, as well as all the essential parts needed to replace worn components or add another watering point to an existing AutoPot system.

The AutoPot 1Pot Accessory Pack is a practical solution for maintaining and expanding AutoPot systems. Whether you want to replace worn components or add another pot to an existing setup, this kit contains all the essential parts needed to connect and operate a new module correctly.

At the heart of the kit is the AQUAvalve5 – the latest generation of AutoPot’s automatic valve. It regulates the supply of water and nutrient solution to plants without electricity, pumps or timers. Thanks to its gravity-fed operation, the valve delivers water only when plants need it, allowing the substrate to go through natural wetting and drying cycles.

The kit also includes a Root Control Disc, which prevents roots from reaching the valve, and a Matrix Disc, which ensures even water distribution at the base of the pot. The included tubing, connectors and seal allow quick connection to an existing 9 mm AutoPot system.

All components are genuine AutoPot replacement parts, manufactured for full compatibility with 1Pot systems using 6 mm tubing.

Technical specifications

✔️ Manufacturer: AutoPot

✔️ Type: Accessory kit for AutoPot 1Pot

✔️ Compatibility: AutoPot 1Pot (9 mm)

✔️ Valve: AQUAvalve5

✔️ Tubing size: 9 mm

✔️ Genuine AutoPot replacement components

✔️ Suitable for system expansion or repair.

📦 Kit includes

✔️ 1 × AQUAvalve5

✔️ 1 × Matrix Disc

✔️ 1 × Root Control Disc

✔️ 1 × 6 mm tube (1 m)

✔️ 1 × 6 mm T-connector

✔️ 1 × 16–6 mm cross connector

✔️ 1 × 6 mm Top Hat seal (rubber grommet)

✔️ Installation instructions.

Benefits

✔️ Genuine AutoPot components

✔️ Includes the new-generation AQUAvalve5

✔️ Easy to install without special tools

✔️ Suitable for system repairs and expansion

✔️ Ensures reliable operation of the gravity-fed irrigation system

✔️ Compatible with all AutoPot 1Pot systems with 9 mm tubing

✔️ High-quality, durable components.

Applications

Suitable for:

• AutoPot 1Pot systems

• Replacing worn components

• Expanding existing AutoPot installations

• Automatic gravity-fed irrigation

• Home and professional plant growing.

📋 Instructions for use

1. Turn off the water supply to the AutoPot system.
2. Install the AQUAvalve5 in the corresponding tray according to the instructions.
3. Place the Root Control Disc and Matrix Disc at the bottom of the pot.
4. Connect the included 6 mm tube to the existing irrigation line using the connectors provided.
5. Check that all connections are properly sealed.
6. Fill the reservoir and test the system before adding plants.

⚠️ Important: This kit is designed for AutoPot 1Pot systems with 6 mm tubing. Before purchasing, check which type of tubing system you use to ensure full compatibility.

💡 Tip from Urban Botaniks: When replacing the AQUAvalve, we recommend replacing the Root Control Disc at the same time, especially if the system has been in use for several seasons. This will ensure trouble-free operation and prevent roots from reaching the valve.

AutoPot compatibility

Match the component to the specific system generation. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Explore AutoPot systems and parts.

AQUAbox Straight is designed to supply water to plants of all types and sizes grown directly in soil.
AQUAbox Straight is attached to a single capillary wick that distributes water beneath the soil across an area of up to 4 square metres. With an AQUAvalve valve at its base, AQUAbox Straight draws as much water as the plants need from the water supply (reservoir), regulating the water delivery. The plant roots instinctively seek out the water source, attaching themselves to the capillary wicks beneath the soil surface.

The AQUAbox box includes AQUAvalve valve technology, but is designed to be placed directly in the ground; the capillary mat draws water from the AQUAbox and distributes it through the soil below.
The AQUAbox box ensures your plants are watered for days or weeks at a time, making it an ideal irrigation solution for weekends, holidays, and year-round watering.

AutoPot AQUAbox Straight includes:

• 1x AQUAbox Straight Body
• 1x AQUAvalve valve
• 1x mini spirit level
• 1x 13 mm-4 mm inline filter
• 1x AQUAbox Straight capillary mat
• 2 m of 4 mm tubing
• 1x full instructions

Tip: Make sure the capillary strips touch the bottom of the AQUAbox on both sides of the AQUAvalve valve after they have been rolled up.

AutoPot Compatibility

Match the component to the specific system generation. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

Autopot rooting tray, with the option to connect to an automatic irrigation system.

• Height: 28cm
• Length: 120cm
• Width: 55cm

• Transparent lid with ventilation holes
• 2 coconut mats (substrate), 3cm thick
• AquaValve valve
• Copper-coated sheet to restrict roots - 115cm x 51cm
• 4mm hose, 1 meter long
• Reducing tee - 13->4mm
• Tee - 4mm
• Garland plastic tray, resistant to minerals and salts.

Video: https://www.youtube.com/watch?v=_OUN6sXH2wY

AutoPot Compatibility

Match the component to the specific generation of the system. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.

Fittings kit for a water tank or Flexi Tank.

AutoPot compatibility

Make sure the component is compatible with the specific system generation. AQUAvalve and AQUAvalve5 have different connections, and not all older trays and hoses are directly compatible with the new valve.

Browse AutoPot systems and parts.