Manifolds, Micro Stakes and Emitters

• Adjusted by turning the cap
• Suitable for 4mm tubing
• Height: 13.5cm
• Weight: 11 grams

A solution for pots, tubs, landscaped gardens and nurseries. Ideal for hanging pots. Suitable for all types of domestic and professional irrigation systems.

Maximum flow rate 33 litres/hour and 40cm radius at 1bar(14psi) water pressure
Maximum flow rate 49 litres/hour and 90cm radius at 2bar(30psi) water pressure

https://www.youtube.com/watch?v=T56BsyDEGXk&

Additional information:

https://antelco.com/assets/products/datasheets/Page-1-Shrubbler-Adjustable.pdf

PLANTiT 13mm hose outlet. The outlet for a drum / bucket is designed to meet a range of water-reticulation applications in hydroponic cultivation.

• for hose: ⌀ 13mm or 1/2 inch

Antelco PotStream adjustable drip-irrigation stake:

The patented design provides convenient, easy access for flow adjustment.

Suitable for pots with wall thicknesses up to 4cm.

Suitable for pots with diameters up to 60cm!

• 0-40 litres per hour
• Suitable for 4mm tubing
• Height: 20cm
• Width: 2.2cm
• Weight: 11 grams

Maximum flow rate:

16 litres per hour and a 23cm radius at 0.5 bar
22 litres per hour and a 24cm radius at 1 bar
31 litres per hour and a 28cm radius at 2 bar
40 litres per hour and a 33cm radius at 3 bar

Video:

https://www.youtube.com/watch?v=IpzEkgbNkA8&

Additional technical information:

https://antelco.com/assets/products/datasheets/Page-2-Potstream-Adjustable-Dripper.pdf

Small sprayer with 1 m hose.

We offer two sizes for our drip irrigation types:

Ø2.5 mm

Ø4 mm

We offer two sizes for our drip irrigation types: Ø 2.5 mm Ø 4 mm

Compression fitting end cap 20 for PE pipes.

Maximum working pressure 12,5 bar.

Compression tee fitting 25x25x25 for PE pipes.

Maximum working pressure 10 bar.

We offer two sizes for our drip irrigation types:

Ø4 mm

HDPE PN10 pipe adapter (connector)

Compression fitting tee 20x20x20 for PE pipes.

Maximum working pressure: 10 bar.

Compression End Cap 25 for PE pipes.

Maximum working pressure 12,5 bar.

D-type inline disc filter with 1" male threaded connection.

Two 1/4" male threaded outlets for pressure gauges.

To install pressure gauges, drill openings at both outlets (1/4"). Install the pressure gauges using a 1/4" coupling.

See related products.

Filtration rating - 120 mesh (130 microns)

Compression fitting adapter with female thread 16x1/2" for PE pipes.

Maximum working pressure 12,5 bar.

Drip irrigation valve with a barbed take-off, without a rubber seal, with locknut for 16mm multi-season drip hose

Recommended for installing on LDPE pipes Ø25 and Ø32.

To install the valve, drill an Ø8 hole in the pipe. Use an Ø8 punch to make the hole (see related products).

Push the tapered part of the valve’s take-off through the hole you made in the pipe.

Tighten the take-off locknut.

Compression Fitting Reducer 25x20 for PE pipes.

Maximum working pressure 12,5 bar.

iDrop PC pressure-compensating dripper 4 l/h (PC - pressure compensated)

• Constant dripper flow rate from 0,5 to 4,5 bar.

• Suitable for irrigation systems with long rows and uneven terrain with major elevation differences.

• Suitable for drip irrigation of orchards, vineyards, greenhouses and anywhere a precise flow rate is required

• Turbulent flow preventing deposits and clogging

• Made from next-generation polymers resistant to fertilisers and chemicals

• The base colour determines the dripper flow rate - the green colour corresponds to a flow rate of 4 litres per hour

• Operating pressure range 0,5 to 4,5 bar

Recommended minimum filtration grade - 120 mesh (130 microns)

To install, make a Ф2,0 - 2,5 - 3,0 mm hole with a punch in polyethylene pipe (see related products).

Installation on LDPE pipes is recommended.