Lighting — Timers and Controllers

G-Systems Timer Box 4x600W + Heating control board with a mechanical timer for managing various lighting types (LED, HPS and MH lamps), used in indoor greenhouses. The timer box allows heating to be switched on when the lighting is not operating.

• max. power: 2400 W
• 3 operating modes (Off / Auto / Off)
• option to switch on heating when the lighting is off
• clock setting: 15-min. segments

Note: The mechanical timer (China) may have a 4-5% time lag, which is why we recommend using the control board with the digital timer G-Systems Timer Box IV 4x600W + Heating!

Note: the timer in the box has no battery; therefore, after a power interruption, it will not switch on automatically.

Technical specification:

• housing: W×H×D= 115 x 228 x 75 mm
• timer box: W×H×D= 150 x 240 x 97 mm
• voltage: 230V / 50Hz
• amperage: 13 A
• power: 2400 W
• operating modes: Off-Auto-On
• clock setting: 15-min. segments
• contactor: electronic
• protection class: IP20

LUMATEK Digital Panel PLUS 2.0 (HID+LED) is a digital lighting controller that can control all LED light fixtures, drivers and Lumatek ballasts. Using innovative technology, this controller intelligently monitors room temperatures and the light cycle, and safely controls the dimming and switching on/off of the lighting.

• controls up to 400 ballasts or 100 LED drivers
• two control channels (Zone A and Zone B)
• up to 200 ballasts / 50 LED drivers per channel
• compatible with all Lumatek ballasts: 315W, 600W, 630W and 1000W
• compatible with all Lumatek LED drivers: 90W, 120W, 465W, 600W and 1000W
• temperature sensor for monitoring and control
• automatic temperature regulation through dimming and switching for safety control
• simulates sunrise and sunset to reduce plant stress
• warranty: 3 years

Instructions for use: here* and here*

Lumatek Digital Panel Plus 2.0 is a dual-signal, dual-channel digital lighting controller. Each of its two channels (zones) can control up to 200 Lumatek ballasts or up to 50 LED fixtures. Each channel (zone) can control ballasts/drivers with the same wattage; Zone A can control ballasts/drivers with the same power supply as Zone B, or Zone B can be configured to control ballasts/drivers with a different wattage. For example, Zone A can control 600W LED fixtures, while Zone B can control 600W or 315W HID ballasts.

Features:

• controls up to 400 ballasts or 100 LED fixtures
• two control channels (Zone A and Zone B)
• up to 200 ballasts / 50 LED drivers per channel
• 24-hour lighting schedule and switching
• temperature sensor for monitoring and control
• dimming with up to ±1% accuracy
• automatic temperature regulation through dimming and switching for safety control
• simulates sunrise and sunset to reduce plant stress
• automated light-intensity control

Specifications:

• power supply: adapter 100 - 240V, 50/60Hz - DC 5V/2A
• compatible with all Lumatek ballasts: 315W, 600W, 630W and 1000W
• compatible with all Lumatek LED drivers: 90W, 120W, 465W, 600W and 1000W
• dimming range: 10% - 115%
• power dimming accuracy: 1%
• sunrise/sunset duration: 0-30 min
• dimensions: 125 x 80 x 25mm
• warranty: 3 years

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 6x600W inductive loads.


Dimensions and technical data:

230x300x110mm
230V / 50Hz
24h timer with 36h battery backup, 30min settings.
4x16A 230V
protection rating: IP40

Compatible with 1000W ballasts and lamps:

circuits: 2 x 16A
With magnetic ballast: 4 x 1000W
With electronic ballast: 4 x 1000W

🔹LUMii XLED Controller – EU Plug is a high-quality controller designed to control LED lighting with a 0-10V signal. It allows precise adjustment of the photoperiod and light intensity, as well as sunrise and sunset simulation, ensuring optimal conditions for plant growth.

🔹 Detailed specifications:

Manufacturer: LUMii

Model: XLED Controller – EU Plug

Signal type: 0 – 10 V

Number of channels: 1

Maximum number of connected devices: 25 LUMii XLEDv6 680W LED lights

Output voltage: 0 – 10 V ± 0.1 V

Adapter input voltage: 120 – 240 V AC

Controller input voltage: 12 V DC, 1.0 A

Operating temperature: 0°C – 35°C

Operating humidity: up to 80% RH, non-condensing

Protection rating: IP20

Installation: Wall-mounting or hanging option

Included accessories: EU plug adapter

🔹 Recommendations and instructions for use:

Connect the controller to the power source using the supplied adapter.

Use an RJ12 cable or connect directly to the push-in terminals to connect to the LED lights.

Set the desired photoperiod, light intensity, and sunrise and sunset simulation parameters via the 5-button interface.

The controller will control the connected devices, ensuring optimal conditions for plant growth.

✅ Benefits of use:

Precise control: Allows adjustment of the photoperiod and light intensity, as well as sunrise and sunset simulation.

Multiple devices: Can control up to 25 connected LED lights.

Ease of use: Intuitive 5-button interface for easy configuration.

Flexibility: Compatible with any LED lighting that accepts a 0-10V signal.

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 12 × 600 W inductive loads.

Standard version – single-phase, with 3 power cables.


Dimensions and technical data:

230 × 300 × 110 mm
230 V / 50 Hz
24 h timer with 36 h battery backup, adjustable in 30 min intervals.
4 × 16 A 230 V
protection class: IP40

Compatibility with 1000 W ballasts and lamps:

circuits: 3 × 16 A
With magnetic ballast: 6 × 1000 W
With electronic ballast: 9 × 1000 W

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 12x600W inductive loads.

Variant "+heating" switches on 1 load when the lights are off.


Dimensions and technical specifications:

230x300x110mm
230V / 50Hz
24h timer with a 36h battery, adjustable in 30min increments.
4x16A 230V
protection class: IP40

Compatibility with 1000W ballasts and bulbs:

circuits: 3 x 16A
With magnetic ballast: 6 x 1000W
With electronic ballast: 9 x 1000W

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 6x600W inductive loads.

The "+heating" version includes 1 load when the lights are switched off.


Dimensions and technical data:

230x300x110mm
230V / 50Hz
24h timer with a 36h battery backup, adjustable in 30min increments.
4x16A 230V
protection class: IP40

Compatibility with 1000W ballasts and lamps:

circuits: 2 x 16A
With magnetic ballast: 4 x 1000W
With electronic ballast: 6 x 1000W

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 8x600W inductive loads.


Dimensions and technical data:

230x300x110mm
230V / 50Hz
24h timer with 36h battery backup, 30min settings.
4x16A 230V
protection class: IP40

Compatibility with 1000W ballasts and lamps:

circuits: 2 x 16A
With magnetic ballast: 4 x 1000W
With electronic ballast: 6 x 1000W

🔹 GSE Timer Box IV is a professional lighting and heating controller designed for hydroponic and greenhouse systems. It allows simultaneous control of up to 4 600W lamps and the activation of heating devices with a maximum power of up to 2300W when the lighting is switched off. With a built-in temperature sensor and lamp dimming capability, this controller provides optimal conditions for plant growth.

🔹 Detailed specifications:

• Manufacturer: GSE (G-Systems Engineering)
• Model: Timer Box IV 4x600W + heating + temperature control
• Maximum lighting power: 4x600W
• Maximum heating power: 2300W
• Voltage: 230V / 50Hz
• Switching interval: 30 minutes
• Battery backup: 36 hours
• Relay durability: 10,000,000 cycles
• Protection class: IP54
• Dimensions: 230 x 300 x 110 mm
• Weight: 2 kg
• Certifications: CE, RoHS
• Warranty: 2 years

🔹 Recommendations and instructions for use:

1. Connect up to 4 600W lamps to the corresponding controller outputs.
2. Connect the heating device to the dedicated heating output.
3. Set the desired lighting on and off times using the built-in timer system.
4. The controller will automatically switch on the heating when the lighting is switched off to maintain an optimal temperature.
5. Regularly inspect and maintain the device to ensure long-lasting and efficient operation.

✅ Benefits of use:

• Efficient energy management: Allows simultaneous control of lighting and heating, optimizing energy consumption.
• Maintaining optimal conditions: Automatically regulates temperature and humidity, creating ideal conditions for plant growth.
• Easy setup and use: An intuitive interface and easy timer setup for lighting and heating.
• High reliability: With long-lasting relay durability and 36-hour battery backup, ensuring uninterrupted operation during power outages.