Water pumps for hydroponics and irrigation

BOYU FP-1500 Submersible Water Pump 1500 L/h is suitable for all hydroponic systems and applications that require nutrient solution to be pumped. The shaft is corrosion-resistant, and all parts are insulated, waterproof and sealed. Thanks to its smart design, the pump is easy to disassemble and clean.

• voltage: 230V, 50/60Hz
• power: 25W
• max. head: 2.5m
• max. flow rate: 1500 L/h
• outlet diameter: ⌀ 13mm
• dimensions: 104 x 93 x 140mm

Choosing a Water Pump

Choose a flow rate that suits the required head, hose length and resistance from the fittings. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

BOYU FP-750 submersible water pump 750 L/h is suitable for all hydroponic systems and those that require nutrient solution to be pumped. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to its intelligent design.

• voltage: 230V, 50/60Hz
• power: 12W
• max. head height: 1.5m
• max. flow rate: 750 L/h
• outlet diameter: ⌀ 13mm
• dimensions: 224 x 139 x 144mm

Choosing a water pump

Match the flow rate to the required head, hose length and resistance from the fittings. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

BOYU FP-1000 submersible water pump 1000L/h is suitable for all hydroponic systems and those requiring nutrient solution pumping. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. The intelligent design makes it easy to disassemble and clean.

• voltage: 230V, 50/60Hz
• power: 16W
• max. head height: 1.8m
• max. flow rate: 1000L/h
• outlet diameter: ⌀ 15mm
• dimensions: 89 x 70 x 111mm

Choosing a water pump

Match the flow rate to the required head, hose length and fitting resistance. The stated maximum flow rate does not apply at the maximum head.

Browse water pumps.

BOYU FP-150 submersible water pump 150 L/h is suitable for all hydroponic systems and those that require nutrient solution to be pumped. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to its clever design.

• voltage: 230V, 50/60Hz
• power: 2.5W
• max. head height: 0.6 m
• max. flow rate: 150 L/h
• outlet diameter: ⌀ 11 mm
• dimensions: 50 x 43 x 48 mm

Choosing a water pump

Choose a flow rate that suits the required head, hose length and resistance from the fittings. The stated maximum flow rate cannot be achieved at the same time as the maximum head.

Browse water pumps.

BOYU FP-100 submersible water pump 120l/h is suitable for all hydroponic systems and systems that require nutrient solutions to be pumped. The shaft is non-corrosive, and all parts are insulated, waterproof, and sealed. Disassembly and cleaning are easy thanks to its smart design.

• voltage: 230V, 50/60Hz
• power: 1.5W
• max. water head: 0.3m
• max. flow rate: 120l/h
• outlet diameter: ⌀ 8mm
• product dimensions: 40 x 36 x 42mm

Choosing a water pump

Match the flow rate to the required head, hose length, and fitting resistance. The stated maximum flow rate does not apply at maximum head.

Browse water pumps.

BOYU FP-350 submersible water pump 350 l/h is suitable for all hydroponic systems and those that require nutrient solution to be pumped. The shaft is non-corrosive, and all parts are insulated, waterproof, and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 6W
• max. head height: 0.8 m
• max. flow rate: 350 l/h
• outlet diameter: ⌀ 13 mm
• dimensions: 69x54x82 mm

Choosing a water pump

Match the flow rate to the required head, hose length, and fitting resistance. The specified maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

Wave Maker 3000 from Neptune Hydroponics is a water circulator for mixing nutrient solutions in reservoirs, promoting water oxygenation.

• Power: 6W
• Flow rate: 3000l/h
• Voltage/frequency: 220V-240V/50Hz
• Weight: 0.5kg

Note: This product is specially designed to generate water movement. It is not a filter pump. Please consult your distributor before use.

WARNING: Please make sure all pump parts are in good condition before use. Do not connect it to the power supply if the voltage differs from that specified on the label.

• We recommend keeping the magnets apart before installation. Avoid placing your hands between them due to their strong magnetic force, and remove any metal pieces or other magnets so they are not attracted and to prevent possible injury.
• The strong magnetic force generated by magnets can cause permanent damage to electrical equipment and other items, such as pacemakers, credit cards, keys ... Keep them at a safe distance of at least 30 centimeters.
• Keep away from children and pets!

Choosing a Water Pump

Match the flow rate to the required head, hose length, and fitting resistance. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

BOYU FP-3000 3000 L/h submersible water pump is suitable for all hydroponic systems and those that require nutrient solution to be pumped. The shaft is corrosion-resistant, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 68W
• max. head: 3.5 m
• max. flow rate: 3000 L/h
• outlet diameter: ⌀ 19 mm
• dimensions: 132 x 106 x 172 mm

Choosing a water pump

Match the flow rate to the required head, hose length and fitting resistance. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

BOYU FP-2000 submersible water pump 2000 L/h is suitable for all hydroponic systems and those that require nutrient solution to be pumped. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 43W
• max. head: 3.0m
• max. flow rate: 2000 L/h
• outlet diameter: ⌀ 19mm
• dimensions: 118 x 101 x 158mm

Choosing a water pump

Match the flow rate to the required head, hose length and resistance from the fittings. The stated maximum flow rate does not apply at maximum head.

Browse water pumps.

Wave Maker 6000 from Neptune Hydroponics is a water circulator for mixing nutrient solutions in containers, helping to oxygenate the water.

• Power: 12W
• Flow rate: 6000л/ч
• Voltage/frequency: 220V-240V/50Hz
• Weight: 0.5кг

Note: This product is specially designed to generate water movement. It is not a filter pump. Please consult your distributor before using it.

WARNING: Please make sure all pump parts are in good condition before use. Do not plug it into the power supply if the voltage differs from that indicated on the label.

• We recommend keeping the magnets apart before installing them. Avoid placing your hands between them because of their strong magnetism, and remove any metal pieces or other magnets so they are not attracted and cause injury.
• The strong magnetism produced by magnets can cause permanent damage to electrical equipment and other items, such as pacemakers, credit cards, keys ... Keep them at a safe distance of at least 30 centimeters.
• Keep away from children and pets!

Choosing a water pump

Match the flow rate to the required head, hose length, and resistance from the fittings. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

Sicce VOYAGER 4 6000 L/h is a submersible circulation pump that simulates wave motion to increase water circulation in the nutrient reservoir, thereby preventing dissolved nutrients from settling. Thanks to its reliable magnetic support, the pump can be placed anywhere in the reservoir, and its ability to rotate 360° lets you point it in practically any direction you want.

• flow rate: 6000 L/h
• power: 14W
• suitable for tanks with a capacity of: 400-730 L
• quiet
• self-cleaning impeller
• stable magnetic attachment
• wide, moderate flow
• 3-year warranty

User manual: here*

Key features:

• unique two-way rotor for unidirectional startup and quiet operation
• 360° rotation of the base for positioning as needed
• reliable magnetic support and an additional rubber pad to prevent vibrations; tank thickness up to 1.5 cm.
• quiet
• self-cleaning impeller
• stable magnetic attachment
• wide, moderate flow
• flow regulation
• stainless steel shaft
• The pump can be used in liquids or environments with a temperature no higher than 35°C!
• made in Italy
• 3-year warranty

Technical specifications:

• flow rate: 6000 L/h
• power: 14W
• suitable for tanks with a capacity of: 400-730L
• voltage: 230-240V / 50hz

Choosing a water pump

Match the flow rate to the required head, hose length, and fitting resistance. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

Compact and reliable submersible pump, Hailea HX-8810 with a flow rate of ~ 1,050 L/h and good head, suitable for ponds, small fountains, circulation and hydroponic systems.

Detailed specifications

• Model: HX-8810 (HX-8800 series).
• Power: 12 W.
• Power supply: 220-240 V / 50 Hz.
• Flow rate: 1,050 L/h.
• Maximum head (Max jet): 1.4 m.
• Outlet diameter: Ø 20 mm.
• Dimensions: 211 × 102 × 145 mm.

Design features:

• Ceramic (alumina ceramic) shaft—corrosion-resistant.
• Dual water-cooling design for rapid heat dissipation.
• Anticorrosive ABS plastic housing, resistant to alkaline environments.  
• Can be used submerged or out of water.  
• Protective inlet cover/filter to keep out particles.
• Rubber suction-cup feet for securing the pump to surfaces, providing stability and minimizing vibration.
•  

Usage recommendations

• Install the pump on a clean, sturdy surface, using the rubber suction-cup feet to prevent movement and vibration.
• Connect it to a Ø 20 mm hose (or a suitable adapter) to maintain maximum efficiency.
• Keep the inlet filter/cover clean—regular cleaning will prevent buildup from reducing the flow rate.
• Never let the pump run dry—it must be at least partially submerged or supplied with an adequate flow of water.
• If you use the pump out of water, protect it from dust, secure it firmly and ensure adequate cooling/ventilation.
• For long hose runs, check for pressure drops and losses along the way.

Benefits

Hailea HX-8810 is a compact, efficient and versatile pump with a flow rate of ~1,050 L/h and a maximum head of 1.4 m. It combines a sturdy design with a ceramic shaft, ABS housing, dual water cooling and the ability to be used both submerged and out of water. This makes it a suitable choice for a range of water applications—ponds, fountains, circulation and hydroponic systems.

Choosing a water pump

Match the flow rate to the required head, hose length and fitting resistance. The stated maximum flow rate is not the flow rate at maximum head.

Explore water pumps.

BOYU FP-4000 submersible water pump, 4000 L/h is suitable for all hydroponic systems and those that require nutrient solution to be pumped. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to its smart design.

• voltage: 230V 50/60Hz
• power: 75W
• max. head: 3m
• max. flow rate: 4000 L/h
• outlet diameter: ⌀ 19mm
• dimensions: 132 x 106 x 172mm

Choosing a water pump

Match the flow rate to the required head, hose length and fitting resistance. The stated maximum flow rate does not apply at maximum head.

Browse water pumps.

Compact and efficient submersible pump Hailea HX-8830 with a flow rate of 2,900 L/h and a maximum head of ~2.3 m - ideal for ponds, fountains, and circulation. Water pump for installation inside or outside the tank. High-quality ABS plastic housing. Corrosion-resistant ceramic shaft, resistant to all kinds of solutions. Suitable for 200-300L tanks. Flow rate: 2900L/h Water column height: 2.3m Power: 45W Input voltage: 220-240V 50Hz Outlet diameter: 25mm Designed for continuous use. Detachable filter - allows use inside or outside the tank. Dual water-cooled design for rapid heat dissipation. Suitable for all hydroponic needs - pumping, aeration, NFT, filtration. Suction cups for secure attachment inside the tank.

Detailed specifications

• Model: HX-8830
• Power: 45 W
• Flow rate: 2,900 L/h
• Maximum head: approximately 2.3 m
• Outlet / hose diameter: 25 mm (1")
• Dimensions: 157 × 85 × 104 mm
• Weight: ~ 1.18 kg

Construction and features:

• Shaft: ceramic / aluminum-ceramic — corrosion-resistant; suitable for fresh and salt water.  
• Cooling: dual water cooling for rapid heat dissipation.  
• Housing: ABS plastic, resistant to alkalis and corrosion. 
• Sealing and insulation: the motor is sealed with epoxy resin to make the windings waterproof. 
• Mounting: rubber suction feet for securing the pump to surfaces.
• Application: suitable for submersion (in water) or inline use out of water.
• Filter protection: supplied with a cover / filter that fits over the inlet to prevent clogging.

Usage recommendations

• Mount the pump on a sturdy surface, using the rubber suction feet if possible, to reduce vibration.
• Use a suitable Ø 25 mm hose to maintain the specified flow rate and minimize pressure loss.
• Clean the inlet filter / cover regularly to prevent a drop in flow rate due to dirt buildup.
• Do not allow the pump to run dry — it must always be at least partially submerged or in contact with water.
• If using the pump out of water, protect it from dust and ensure it is securely mounted.

Benefits

Hailea HX-8830 is a compact, reliable, and efficient submersible pump with a flow rate of 2,900 L/h and a head of approximately 2.3 m. Featuring a ceramic shaft, ABS housing, and dual water cooling, it offers good corrosion resistance and a long service life. Its ability to operate both underwater and out of water makes it a versatile choice for a range of water applications.

Choosing a water pump

Match the flow rate to the required head, hose length, and fitting resistance. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

Small and versatile submersible pump Hailea HX-1500 with a flow rate of up to 400 l/h, adjustable flow, and the ability to operate at a low water level — ideal for hydroponics, reservoirs, and circulation.

Detailed specifications:

• Flow rate: 400 l/h — maximum flow under optimal conditions
• Power: 5 W
• Maximum head: 0.7 m
• Power supply / voltage: 220-240 V / 50 Hz
• Connection / outlet diameter: Ø 12 mm (inlet/outlet)
• Housing: ABS plastic, corrosion-resistant and suitable for fresh and salt water
• Shaft / axle: stainless steel.

Additional features:

• Flow regulator— allows the flow rate to be increased or decreased
• Rubber suction feet for attaching to glass or a smooth surface (for stability)
• Suitable for operation at a low water level — the pump can function even when the water level is low

Usage recommendations

• Secure the pump firmly using the rubber suction feet to prevent vibration or movement.
• Use a Ø 12 mm hose (or an adapter to fit one) to connect to the outlet.
• Adjust the flow to suit the system's needs — if a low flow rate is required, reduce it using the built-in regulator.
• Clean the inlet grille / cover periodically to prevent clogging and reduced performance.
• Make sure the pump does not run dry — it must be submerged or connected to a water supply.
• When using nutrient solutions (in hydroponics), check that the materials are compatible with the concentrations in the solution.

Benefits

The Hailea HX-1500 is a useful choice for small to medium-sized systems where space is limited but constant circulation is needed. With a flow rate of 400 l/h, adjustable flow, and a durable housing, it is suitable for reservoirs, NFT systems, aquariums, and other installations. Its ability to operate at a low water level offers greater flexibility in installation and design.

Choosing a water pump

Match the flow rate to the required head, hose length, and fitting resistance. The stated maximum flow rate is not the flow rate at maximum head.

Explore water pumps.

Reliable and versatile submersible Hailea HX-8860 pump with a flow rate of 5,800 L/h and a maximum head of about 4.1–4.2 m — for ponds, fountains, and circulation systems. Water pump for installation in or outside a reservoir. High-quality ABS plastic housing. Ceramic anti-corrosion shaft, resistant to all kinds of solutions. Suitable for reservoirs of around 400 L and drip systems. Flow rate: 5800 L/h Water column height: 4.1 m Power: 130 W Input voltage: 220-240 V 50 Hz Outlet diameter: 25 mm Designed for continuous use. Removable filter allows use in or outside the reservoir. Dual water-cooled construction for rapid heat dissipation. Suitable for all hydroponic needs — pumping, aeration, NFT, filtration. Suction cups for secure attachment in the reservoir.

Detailed specifications

• Model: HX-8860
• Material: ABS plastic housing, resistant to corrosion and impacts
• Shaft/axle: aluminum-ceramic shaft (alumina-zirconia ceramic)
• Power supply/voltage: 110-120 / 220-240 V (depending on the version)
• Power: ~ 150 W
• Flow rate: 5,800 L/h
• Maximum head: about 4.1–4.2 m
• Outlet diameter: Ø 18 mm
• Dimensions: 242 × 145 × 170 mm
• Weight: about 2.9 kg

Features:

  • Suitable for fresh and salt water.
  • Dual water cooling for rapid heat dissipation.
  • The motor is sealed with high-quality resin to prevent water ingress.
  • Includes a filter/cover to protect against debris.
  • Can operate underwater or outside the water.

Usage recommendations

• Mount the pump securely using the rubber suction feet or suitable surface fastening to reduce vibration.
• Use a hose with an 18 mm inner diameter to connect to the outlet.
• Keep the filter clean — clean it periodically to prevent reduced flow.
• The pump must not run dry: it must always be submerged or connected to a water flow.
• When installing it outside the water, provide dust protection and secure mounting.
• When using it for fountains or tall jets, account for the operating head and elevation.

Benefits

The Hailea HX-8860 pump offers reliability, a sturdy housing, and excellent performance — a flow rate of 5,800 L/h and a head of up to ~4.2 m. With its aluminum-ceramic shaft and dual water cooling, it is suitable for a variety of water applications — from ponds and recirculation systems to fountains.

Choosing a water pump

Match the flow rate to the required head, hose length and fitting resistance. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

Sicce VOYAGER HP7 10500l/h is a submersible circulation pump that simulates wave motion to increase water circulation in the nutrient reservoir, thereby preventing dissolved nutrients from settling. Thanks to its reliable magnetic mount, the pump can be placed anywhere in the reservoir, and its ability to rotate 360° lets you direct it in virtually any desired direction.

• flow rate: 10500l/h
• power: 17W
• suitable for reservoirs with a capacity of: 700-1200l
• quiet
• self-cleaning impeller
• secure magnetic mounting
• wide, gentle flow
• 3-year warranty

User manual: here*

Key features:

• unique two-way rotor for one-way startup and quiet operation
• 360° rotating base for positioning as needed
• reliable magnetic mount and additional rubber pad to prevent vibration; reservoir thickness up to 2cm.
• quiet
• self-cleaning impeller
• secure magnetic mounting
• wide, gentle flow
• flow adjustment
• ceramic shaft
• The pump can be used in liquids or in environments with a temperature no higher than 35°C!
• made in Italy
• 3-year warranty

Technical specifications:

• flow rate: 10500l/h
• power: 17W
• suitable for reservoirs with a capacity of: 700-1200l
• voltage: 230-240V / 50hz

Choosing a water pump

Match the flow rate to the required head, hose length, and fitting resistance. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

Compact and efficient Hailea HX-4500 submersible pump with a flow rate of up to 2,000 L/h and a head of up to 2.8 m - suitable for ponds, fountains, feeding systems, and circulation. Includes a mixer for aerating the solution. Designed for extended use, it works well with low water levels in the reservoir. Built-in flow regulator. Suitable for NFT and Flood-and-Drain systems. Suction cups for secure attachment in the reservoir.

Detailed specifications

• Flow rate (maximum): 2,000 L/h.
• Maximum head: 2.8 m.
• Power: 36 W.
• Power supply: 220-240 V / 50 Hz.
• Outlet diameter: 20 mm.
• Construction: ABS plastic housing, stainless steel shaft, resistant to fertilizer solutions

Features:

• Rotary flow regulator 
• Built-in mixing port / air inlet accessory on some versions  
• Suction cups for mounting on surfaces  
• Can operate at low water levels

Usage recommendations

• Secure the pump to a smooth surface using the rubber suction cups to prevent vibration and movement.
• Use a Ø 20 mm hose to avoid reduced flow.
• Adjust the flow rate to suit your needs, especially at different water head heights.
• Clean the inlet cover/filter regularly to prevent blockages and reduced performance.
• Never allow the pump to run dry - it must always be at least partially submerged or in contact with water.
• When using it in nutrient solution systems (hydroponics), check that the material is compatible with fertiliser solutions.

Benefits

The Hailea HX-4500 is a reliable, compact pump offering a flow rate of up to 2,000 L/h, adjustable flow and a sturdy design. It provides good head for small to medium-sized systems and is suitable for fountains, ponds and hydroponic setups.

Choosing a water pump

Choose a flow rate suited to the required head, hose length and fitting resistance. The stated maximum flow rate does not apply at the maximum head.

Browse water pumps.

Compact and versatile Hailea HX-2500 submersible pump with a flow rate of up to 650 l/h and a maximum head of ~1.3 m, with a built-in mixer for introducing air — suitable for hydroponic systems and solution circulation.

Detailed specifications

• Model: HX-2500 — submersible water pump with a fixed flow rate of 650 l/h
• Maximum head: ~ 1.30 m
• Power supply / voltage: 230 V / 50 Hz
• Power: 12 W
• Outlet diameter / connection: 14.5 mm
• Shaft: stainless steel, suitable for fresh and salt water
• Housing: ABS plastic, corrosion-resistant
• Built-in mixer / attachment for oxygenating the solution (O₂)
• Installation: rubber suction feet for attaching to surfaces, for stability during submerged operation
• Operation at a low water level — ability to function with a limited water supply

Usage recommendations

• Install the pump on a flat surface using the rubber suction feet to minimize vibrations.
• Use a hose with an inner diameter of ~ 14.5 mm (or a suitable adapter) for the outlet to maintain the specified flow rate.
• Use the built-in mixer / Venturi system to add air to the solution — this improves oxygen content and stimulates root growth.
• Clean the inlet cover/filter — periodically remove debris to protect the pump from blockages and reduced flow.
• Do not allow the pump to run dry: it must be at least partially submerged or connected to a water flow.
• When used with nutrient solutions (especially fertilizers), check the compatibility of the materials (ABS housing, stainless steel) with the concentrations.

Benefits

Hailea HX-2500 is a compact yet feature-rich pump with a flow rate of 650 L/h and a head of ~1.3 m. It offers reliable operation in low-water environments, a built-in mixer for aerating the solution, and a design suitable for hydroponic systems and circulation. Its small size and low power consumption make it a suitable choice for systems with limited space and specific needs.

Choosing a water pump

Match the flow rate to the required head, hose length, and fitting resistance. The stated maximum flow rate does not apply at maximum head.

Browse water pumps.

BOYU FP-5000 submersible water pump 5000 L/h is suitable for all hydroponic systems and systems that require nutrient solution pumping. The shaft is non-corrosive, and all parts are insulated, waterproof, and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 85W
• max. head: 4.5 m
• max. flow rate: 5000 L/h
• outlet diameter: ⌀ 25 mm
• dimensions: 162 x 133 x 209 mm

Choosing a water pump

Match the flow rate to the required head, hose length, and fitting resistance. The stated maximum flow rate is not achieved at the maximum head.

Browse water pumps.