DUTCHPRO

Explode is our main bloom booster, giving plants in full bloom all the nutrients they need during this phase. This bloom enhancer, enriched with several micronutrients, vitamins and acids, provides explosive flower hardening. Explode also improves the photosynthetic process and increases your plant’s resistance to fungal and bacterial diseases. Its high-quality components are fully absorbed without leaving any residue.

• Total N-P-K: 0.2-0.2-4
• No additional PK 13/14 required
• Stimulates explosive flower hardening
• Improves strength and disease resistance
• Increases the amount of glucose produced
• Optimal uptake by the plant
• Suitable for any irrigation system

During the flowering period, the plant prepares to pollinate. It does this by producing flowers so that pollen can be transferred to fertilise the female plant.
This process requires a great deal of energy. It is therefore vital that plants receive enough energy to develop into fully flowering plants. Plants obtain their energy through a process called "Photosynthesis". In this process, the plant produces energy by using light energy, carbon dioxide from the air, water and nutrients from the soil. Only green leaves containing sufficient chlorophyll participate in photosynthesis and produce glucose. A nutrient deficiency during flowering, when leaves turn yellow and chlorophyll levels decrease, is disastrous for a plant and prevents good results.
Explode ensures the plant receives all nutrients needed for explosive flower hardening. It increases the plant’s resistance to fungal and bacterial diseases. Explode also stimulates the production of green pigment and chlorophyll content in the leaves. This improves photosynthesis. Chlorophyll converts water and nutrients into glucose. This means that light, carbon dioxide, water and nutrients are transformed into even more glucose, so your flowers and fruits gain explosive weight and flavour.

Dosage:

• 100ml per 100 litres of water (1:1000)

User instructions:

• Do not ingest!
• Keep out of reach of children!
• In case of contact with eyes, rinse immediately with plenty of water and seek medical advice!
• Wear protective clothing - the use of gloves is recommended!
• Shake well before use!

Ingredients / NPK:

• 0.1% NO₃
• 0.1% NH₄
• 0.2% P₂O₅
• 3.7% K₂O
• 0.2% CaO
• 0.1% MgO
• 3.1% SO
• 0.1% Na₂O
• 0.1% CI
• 0.001% B
• 0.001% Cu
• 0.001% Fe
• 0.001% Mn
• 0.001% Mo
• 0.001 %Zn

Multi Total supports the key processes needed to convert organic material from dead plant matter into useful nutrients. It activates important root growth by improving soil structure in terms of water retention and stimulates nutrient-producing bacteria in the substrate. Multi Total also stimulates the cation exchange capacity (CEC) of minerals and micronutrients, increasing soil fertility and improving resistance to fungi and stressful conditions. The high-quality components are fully absorbed without residue.

• Total N-P-K: 0.2-0.1-0.1
• Improves soil structure
• Supports bacterial life
• Stimulates cation exchange capacity (CEC)
• Increases resistance to fungi and stress
• Optimal plant absorption

Water retention is essential for plant vitality and health. It provides a continuous water supply to plants between replenishment periods to sustain their growth and survival. The better the soil retains nutrients, the more nutrients are available to your plant so it can grow strong and healthy. Multi Total contains a variety of micronutrients that support this process. It also supports bacterial life, which converts organic matter into useful nutrients for your plants.
Rhizobia is one of these stimulated bacteria, living on plant roots and converting organic material into nitrogen, which is crucial for the plant to grow strong and, above all, remain healthy.
Multi Total also stimulates cation exchange capacity (CEC), where positively charged ions interact with soil. The higher the CEC, the more cations the soil can attract and the better its fertility will be. This enables your plants to absorb more nutrients from the soil, increasing their vigour and growth rate.

Dosage:

• 100ml per 100 litres of water

User instructions:

• Do not ingest!
• Keep out of reach of children!
• In case of contact with eyes, rinse immediately with plenty of water and seek medical advice!
• Wear protective clothing - the use of gloves is recommended!
• Shake well before use!

Ingredients / NPK:

• 0.1% NO₃
• 0.1% NH₄
• 0.1% P₂O₅
• 0.1% K₂O
• 0.1% CaO
• 0.1% MgO
• 0.1% SO
• 0.1% Na₂O
• 0.1% CI
• 0.001% B
• 0.001% Cu
• 0.001% Fe
• 0.001% Mn
• 0.001% Mo
• 0.001 %Zn

Fertilizer with a complete range of nutrients, formulated for soil. This product contains all the macro- and micronutrients needed for vigorous growth and abundant flowering. The high-quality components are fully absorbed without leaving any residue.

• Total N-P-K: 5-2-6
• Stimulates maximum flowering
• Increases strength and vigour throughout the flowering phase
• EC levels up to 2.0
• Suitable for any irrigation system
• Optimal plant absorption

Plants absorb essential elements from air and light, as well as nutrients in the soil. The roots and leaves are the main parts of the plant that absorb these elements. It is essential that plants receive not only sufficient nutrients, but also in the right proportions. This prevents nutrient deficiencies or toxicity (when the plant receives too many nutrients) and promotes maximum growth and health.
During the flowering phase, the plant prepares for pollination. Photoreceptor proteins in the plant signal when it should flower. At this point, the plant begins to produce flowers so pollen can fertilize the female plant. This process costs the plant a great deal of energy. To support the plant during the flowering phase, a balance of nitrogen, potassium, and phosphorus is needed. This keeps the plant strong and healthy throughout the flowering phase.
Original Bloom Soil/Aarde A+B is a perfectly balanced two-part fertilizer containing potassium, nitrogen, and phosphorus, formulated to stimulate maximum flowering and prevent disease. Original Bloom Soil/Aarde A+B is also optimized to reach EC levels of 1.8 - 2.0 (deviations are possible), for even better results!

Dosage:

• 200-300 ml per 100 litres of water

User instructions:

• Do not ingest!
• Keep out of reach of children!
• In case of contact with eyes, rinse immediately with plenty of water and seek medical advice!
• Wear protective clothing - the use of gloves is recommended!
• Shake well before use!

Ingredients / NPK:

• 4.4% NO₃
• 0.4% NH₄
• 1.7% P₂O₅
• 5.5% K₂O
• 3.7% CaO
• 1.0% MgO
• 1.1% SO
• 0.2% Na₂O
• 0.2% CI
• 0.006% B
• 0.002% Cu
• 0.013% Fe
• 0.015% Mn
• 0.002% Mo
• 0.004 % Zn

Take Root is a growth stimulant capable of radically improving the internal and external qualities of young plants. Its active components are naturally derived, including plant hormones and micronutrients. During the first few weeks, a plant is most vulnerable to fungal and bacterial diseases, often because young plants lack minerals, hormones, and vitamins. Take Root contains several plant hormones and micronutrients that stimulate cell division, cell elongation, and nutrient transport, supporting overall root development during early vegetative growth. The high-quality components are fully absorbed without leaving any residue.

• Total N-P-K: 0.1 - 0.1 - 1
• Stimulates remarkable root growth
• Improves cell division, cell elongation, and nutrient transport
• Enhances nutrient uptake
• Contains essential micronutrients and hormones
• Suitable for any irrigation system
• Optimal plant absorption

Increased cell division is crucial, especially at the beginning of your young plant's life. Through cell division, plants grow and become less vulnerable to bacterial and fungal diseases. The better this process works, the stronger and healthier your plants will be throughout their entire cycle.
Cell elongation, on the other hand, is the next step in ensuring your plants are strong and healthy, helping you achieve an excellent final result. Nutrient transport is vital for plant growth and for achieving high yields at the end of the cycle. During cell elongation, a protein called "Auxin" loosens the cell wall so the cell can elongate and absorb more nutrients. Take Root stimulates this process, enabling every cell to absorb at maximum capacity. The more nutrients a cell can absorb, the faster your plants will grow and the healthier they will be.

Dosage:

• 100ml per 100 litres of water (1:1000)

User instructions:

• Do not ingest!
• Keep out of reach of children!
• In case of contact with eyes, rinse immediately with plenty of water and seek medical advice!
• Wear protective clothing - the use of gloves is recommended!
• Shake well before use!

Ingredients / NPK:

• 0.1% NO₃
• 0.1% NH₄
• 0.1% P₂O₅
• 0.1% K₂O
• 0.1% CaO
• 0.1% MgO
• 0.1% SO
• 0.2% Na₂O
• 0.1% CI
• 0.001% B
• 0.001% Cu
• 0.001% Fe
• 0.001% Mn
• 0.001% Mo
• 0.001 %Zn

A complete nutrient fertiliser formulated for soil. This product contains all the macro- and micronutrients needed for vigorous growth. Its high-quality components are fully absorbed without residue.

• Total N-P-K: 4-2-6
• Stimulates maximum growth
• Increases strength and resilience throughout the growth phase
• EC levels up to 1.8
• Suitable for any irrigation system
• Optimal plant absorption

Plants absorb essential elements from the air and light, as well as nutrients in the soil. The plant's roots and leaves are the main components that absorb these elements. It is essential that plants receive not only sufficient nutrients, but also the right ratio. This helps prevent nutrient deficiencies or toxicity (when the plant receives too many nutrients) and promotes maximum growth and health.
During the growth phase, the plant is at its most vulnerable. Diseases associated with fungi and bacteria pose a real threat to underdeveloped roots and leaves. To help the plant develop during the growth phase, the correct blend of potassium, nitrogen and phosphorus is needed to maintain a maximum growth rate. This will make and keep the plant vigorous and strong throughout the growth phase.
Original Grow Soil/Aarde A+B is a perfectly balanced two-component fertiliser containing potassium, nitrogen and phosphorus to stimulate maximum growth and prevent disease. Original Grow Soil/Aarde A+B is also optimised to reach EC levels of 1.5 - 1.8 (variations are possible), for an even better result!

Dosage:

• 200-300ml per 100 litres of water

User instructions:

• Do not ingest!
• Keep out of reach of children!
• In case of contact with eyes, rinse immediately with plenty of water and seek medical advice!
• Wear protective clothing - the use of gloves is recommended!
• Shake well before use!

Ingredients / NPK:

• 3.5% NO₃
• 0.2% NH₄
• 2.1% P₂O₅
• 5.9% K₂O
• 3.1% CaO
• 0.8% MgO
• 2.5% SO
• 0.2% Na₂O
• 0.2% CI
• 0.006% B
• 0.002% Cu
• 0.008% Fe
• 0.015% Mn
• 0.002% Mo
• 0.004 %Zn

Leaf Green gives plants a healthy, vibrant appearance. It is especially recommended for plants experiencing noticeable difficulties during their initial development. Leaf Green contains several vital micronutrients that support plants during nutrient deficiencies. It also stimulates the production of green pigment in the leaves. The high-quality components are fully absorbed by the plants.

• Total N-P-K: 0.2-0.1-0.1
• Improves nutrient uptake
• Helps prevent nutrient deficiencies
• Leaves stay green
• Improves chlorophyll production
• Optimal plant absorption
• Suitable for any irrigation system

Nutrient deficiencies damage plants and make them vulnerable to fungal and bacterial diseases. Nutrient deficiencies can be recognised by yellow leaves. Leaf Green restores yellowing, discoloured plants to a much more attractive, fresh green colour while significantly improving nutrient uptake. Leaf Green also stimulates the production of green pigment in the leaves, improving the photosynthetic process needed for excellent results.

Dosage:

• Ready-to-use spray liquid

User instructions:

• Foliar spraying should be carried out at least 3 hours before the lights are switched on!
• Do not ingest!
• Keep out of reach of children!
• In case of contact with eyes, rinse immediately with plenty of water and seek medical advice!
• Wear protective clothing - the use of gloves is recommended!
• Shake well before use!

Ingredients / NPK:

• 0.1% NO₃
• 0.1% NH₄
• 0.1% P₂O₅
• 0.1% K₂O
• 0.1% CaO
• 0.1% MgO
• 0.1% SO
• 0.1% Na₂O
• 0.1% CI
• 0.001% B
• 0.001% Cu
• 0.001% Fe
• 0.001% Mn
• 0.001% Mo
• 0.001 %Zn

Dutchpro Silica is highly concentrated silicon dioxide that improves the overall health of your plants. Silicon is used to increase the final yield and increase plants' stress resistance, improves the uptake of nutrients and promotes healthier and thicker stems. It also enables better development of the roots and faster growth.   larger and h

• flowers adding Silica
• increases flower size and reduces stress increases resistance
• to drought and hot weather 0.4ml per 1l
• NPK: 0.1-0.1-1 for
• the
• vegetative and flowering stages

Lusher plants with thi

• stems!   Silicon increases resistance to heat and drought and enables plants to develop thicker stems. This results in faster sap flow, allowing more nutrients to be transported to the right parts of your plant. Over time, your plants will develop visibly denser flowers / fruits that are not only larger, but also sweeter and heavier.   The a
ction

of silicon dioxide

•   Silicon dioxide helps increase the amount of water and nutrients in plant cells, which increases their resistance to sudden climate changes and bacterial or fungal diseases.   Applicat
ion:

S

1. well! Dilut
e
2. 0.4ml in 1l of water!

Dutchpro Amino is an organic product containing 18 types of amino acids, designed to improve plant growth; it also reduces stress and supports flower formation. Amino acids are converted into proteins that help transport nutrients, accelerate processes in the plant, and improve energy production through the Krebs cycle.

• improves the strength and development of plants
• increases production of proteins
• enhances processes in the plant and increases the formation of energy
• increases the uptake of calcium and nitrogen (Ca, N)
• 0.4 ml per 1 L
• NPK: 0-0-2
• for the vegetative and flowering phases

Why amino acids?

• Amino acids support key plant processes such as protein synthesis, chlorophyll production, and resistance to stress, pests, and diseases. They also help improve calcium uptake in plant cells while strengthening the cell wall.

Get the most from your amino acids.

• The fastest way for your plant to absorb amino acids is through foliar feeding. By feeding amino acids directly to the leaves, you can increase nutrient transport through the stomata and increase photosynthesis and transpiration.

Application:

1. Shake well!
2. Dilute 0.4 ml in 1 L of water and apply once a week!
3. For greater effect, it can also be applied as a foliar spray!

A fertiliser with a complete range of nutrients, designed for hydro/coco. This product has all the necessary macro- and micronutrients for abundant flowering. The high-quality components will be fully absorbed without any residue.

• Total N-P-K: 5-2-6
• Stimulates maximum flowering
• Increases strength and vigour throughout the flowering phase
• EC levels up to 2.3
• Suitable for any irrigation system
• Optimal plant absorption

Plants absorb essential elements from air and light, as well as from nutrients in the soil. The plant's roots and leaves are the main components that absorb these elements. It is essential that plants receive not only sufficient nutrients, but also the right ratio. This prevents nutrient deficiency or toxicity (when the plant receives too many nutrients) and promotes maximum growth and health.
During the flowering stage, the plant prepares to pollinate. Photoreceptor proteins in the plant indicate when to flower. At this point, the plant begins to produce flowers so that pollen can fertilise the female plant. This process costs the plant a great deal of energy. To stimulate the plant during the flowering stage, a balance of nitrogen, potassium and phosphorus is needed. This will keep the plant strong and healthy throughout the flowering stage.
Original Bloom Hydro / Cocos A + B is a perfectly blended two-part fertiliser containing potassium, nitrogen and phosphorus to stimulate maximum growth and prevent disease. Original Bloom Hydro / Cocos A + B is also optimised to reach EC levels of 2.1 - 2.3 (variations are possible) for an even better result!

Dosage:

• 250-350ml per 100 litres of water

User instructions:

• Do not ingest!
• Keep out of reach of children!
• In case of contact with eyes, rinse immediately with plenty of water and seek medical advice!
• Wear protective clothing - the use of gloves is recommended!
• Shake well before use!

Ingredients / NPK:

• 4.9% NO₃
• 0.4% NH₄
• 2.1% P₂O₅
• 5.9% K₂O
• 3.7% CaO
• 1.4% MgO
• 1.3% SO
• 0.4% Na₂O
• 0.3% CI
• 0.006% B
• 0.002% Cu
• 0.021% Fe
• 0.015% Mn
• 0.002% Mo
• 0.006% Zn

A complete nutrient fertiliser designed for hydro/coco. This product contains all the essential macro- and micronutrients needed for vigorous growth. Its high-quality components are fully absorbed without residue.

• Total N-P-K: 4-2-6
• Stimulates maximum growth
• Increases strength and resilience throughout the growth phase
• EC levels up to 2.0
• Suitable for any irrigation system
• Optimal plant absorption
  

Plants absorb essential elements from air and light, as well as from nutrients in the soil. A plant's roots and leaves are the main components that take up these elements. It is essential that plants receive not only enough nutrients, but also the right balance. This prevents nutrient deficiency or toxicity (when the plant receives too many nutrients) and promotes maximum growth and health.
During the growth phase, the plant is at its most vulnerable. Diseases related to fungi and bacteria pose a real threat to underdeveloped roots and leaves. To help the plant develop during the growth phase, the right blend of potassium, nitrogen and phosphorus is needed to maintain the maximum growth rate. This will make and keep the plant vigorous and strong throughout the growth phase.
Original Grow Hydro / Cocos A + B is a perfectly balanced two-part fertiliser containing potassium, nitrogen and phosphorus to promote maximum growth and prevent disease. Original Grow Hydro / Cocos A + B is also optimised to reach EC levels of 1.8–2.0 (variations are possible), for even better results!

Dosage:

• 250-350 ml per 100 litres of water

User instructions:

• Do not ingest!
• Keep out of reach of children!
• In case of contact with eyes, rinse immediately with plenty of water and seek medical advice!
• Wear protective clothing - the use of gloves is recommended!
• Shake well before use!

Ingredients / NPK:

• 4.2% NO₃
• 0.2% NH₄
• 2.3% P₂O₅
• 6.3% K₂O
• 3.1% CaO
• 1.2% MgO
• 2.7% SO
• 0.6% Na₂O
• 0.3% CI
• 0.006% B
• 0.002% Cu
• 0.018% Fe
• 0.015% Mn
• 0.002% Mo
• 0.006 %Zn

Keep your drip system free of blockages and maintain the best possible operating conditions. Keep It Clean is a plant-safe cleaning product that removes slime and bacteria while inhibiting fungal growth. Long-term preventative use ensures the best results.

• Highly concentrated
• Removes slime and bacteria
• Minimal quantity required

Dosage:

• 10 ml per 100 litres of water (1:10000)

User instructions:

• Do not ingest!
• Keep out of reach of children!
• In case of contact with eyes, rinse immediately with plenty of water and seek medical advice!
• Wear protective clothing - the use of gloves is recommended!
• Shake well before use!

Dutchpro CalMag is a professional additive designed to prevent and correct calcium and magnesium deficiencies in the plant feeding programme. It is ideal for improving cell-wall structure and stimulating healthy growth.

Dutchpro CalMag is a specialised additive designed to provide optimal calcium and magnesium levels, vital for plant development. It is formulated to prevent deficiencies that often occur with soft water or intense lighting, which increase demand for these minerals. Dutchpro CalMag supports strong cell walls, improves resistance to stress and disease, and helps nutrient uptake for stronger growth and healthier plants. Directions: start from the first week of vegetative growth and add between 0.4 ml and 4 ml per 4 l until flushing. Use CalMag when supplementing CO2 and your CO2 PPM is above 1000 PPM.