T.A. - Terra Aquatica

Terra Aquatica TrikoLogic, Trichoderma for roots

Terra Aquatica TrikoLogic contains Trichoderma harzianum for the root zone. See how to use it in soil, coco, and hydroponic systems.

• breaks down organic matter
• protects against the development of pathogenic fungi
• stimulates plant growth

Trichoderma lives in soil, coco, or similar substrates, breaking down organic matter and releasing minerals. This process of decomposition and nutrient release is essential for organic growing, organic hydroponics, bioponics, and aquaponics. As it grows and forms colonies, Trichoderma also releases a range of compounds that stimulate plant growth and substances that inhibit or kill soil pathogens that could otherwise harm your plants, as recent studies have shown.

How to use:

As with all aerobic microorganisms, the better the oxygen supply and the more stable the pH, temperature, and humidity, the healthier and more effective Trikologic will be.

• For seed soaking or as an additive to water/nutrient solution for seedlings/cuttings and young or mature plants: Add 1 g per 15 to 20 liters of water or nutrient solution every 6 to 8 weeks.

• For mature plants in soil or coco: Add 10 g per 150 to 200 liters of water or nutrient solution every 6 to 8 weeks; simply add it to the irrigation system or directly onto the substrate.

• In hydroponics, where the roots are fully submerged in water, and in bioponics: When plants are young and have small root systems, Trikologic needs a base for colonization and reproduction. To provide this, use a commercially available biofilter, or hang a 3 to 5 L plastic basket filled with 80% clay pebbles and 20% coco substrate under the falling water in your reservoir, e.g. at the return point in our Growstream® systems.

Use with:

• all GHE nutrients from GHE - mineral or organic
• in any substrate, hydroponics, or outdoor growing

Feeding program and selection

Explore Terra Aquatica fertilizers and supplements. Dosages depend on the specific product, substrate, and growth stage. Follow the label and official feeding charts.

Terra Aquatica pH-, pH-lowering regulator

Liquid Terra Aquatica pH regulator for lowering the pH of irrigation water and nutrient solution. Measure after each gradual adjustment.

Which type should you choose?

This is a liquid regulator. Browse Terra Aquatica pH regulators to choose the adjustment direction and type.

How to adjust pH

pH- lowers pH. Measure the solution, add gradually according to the label, mix thoroughly, and measure again. Do not determine the amount based only on the reservoir volume, as the source water and nutrient solution affect the adjustment required.

Use appropriate protective equipment as directed on the label. Do not mix concentrated pH regulators with each other or directly with concentrated fertilizers.

Feeding schedule and selection

Explore Terra Aquatica fertilizers and supplements. Adjust dosages according to the specific product, substrate, and growth stage. Follow the label and official feeding charts.

Terra Aquatica Calcium Magnesium, Ca/Mg supplement

Terra Aquatica calcium and magnesium supplement for nutrient solutions. Check compatibility with your base fertilizer and when supplementation is needed.

• prevents secondary nutrient deficiencies
• supports growth and fruiting
• prevents tip burn (in tomatoes and lettuce)
• can be used as a supplement to most feeding programs
• counteracts calcium deposits when growing in coco
• does not clog irrigation system drippers

How to use TA Calcium Magnesium Supplement:

Warning: Do not use with TA fertilizers for soft water (Soft Water), FloraCoco® or FloraNova®: they already contain enough calcium, even for reverse osmosis water!

• For all other situations: use 1.5 ml per 1 L of water for most applications.

• For use with reverse osmosis water: add 2 ml per 1 L of water, before adding fertilizers! (non-TA fertilizers)

• For growing in coco or buffering compressed coco: use 1 to 1.5 ml per 1 liter to moisten (until saturated) the substrate, then add the same amount to the nutrient solution for the first two weeks. Continuous use may be beneficial for fast-growing annual plants.

Use with:

• non-TA fertilizers, hydroponics, or outdoor growing
• coco substrate, especially if it is not TA brand

Feeding program and selection

Browse the Terra Aquatica fertilizers and supplements. Dosages depend on the specific product, substrate, and growth stage. Follow the label and official feeding charts.

Terra Aquatica TriPart Bloom, flowering component

TriPart Bloom, known as FloraBloom, is part of Terra Aquatica's three-part nutrient system. Use with Grow and the appropriate Micro version.

Selection and mixing

TriPart is a system consisting of Micro, Grow, and Bloom. Choose Micro HW or SW according to your water; the proportions of the three components change as the plants develop. Add the components separately to the water and mix between additions.

• provides phosphorus and potassium, which plants need to improve root development and health during the vegetative period and reach their full genetic potential during flowering and fruiting
• use smaller amounts during the vegetative period and larger amounts during flowering

How to use TriPart®:

• Shake the bottles well before each use! 
• Add each part separately, always mixing well afterward!
• Always add the components in this order: Micro - Grow - Bloom!!!
• If using one measuring cup/jug, rinse it thoroughly before adding the next part and after use!
• If watering with hard/tap water (more than 70 mg of calcium per 1 L), use with GHE - T.A. - TriPart Micro Hard Water 1 L (FloraMicro H/W)
• If using reverse osmosis, use with GHE - T.A. - TriPart Micro Soft Water 1 L (FloraMicro S/W)

For growing in soil:

• when the first roots develop: 2 ml per 10 L of water
• when the first leaves appear: 6 ml per 10 L of water
• during the vegetative period: 5 ml per 10 L of water
• during the pre-flowering period: 10 ml per 10 L of water
• during the flowering period: 21 ml per 10 L of water

For growing in hydroponics and coco:

• when the first roots develop: 5 ml per 10 L of water
• when the first leaves appear: 10 ml per 10 L of water
• during the vegetative period: 6 ml per 10 L of water
• during the pre-flowering period: 15 ml per 10 L of water
• during the flowering period: 24 ml per 10 L of water

Use TriPart® with:

• TriPart works for growing all plants in all substrates - soil, hydroponics, and coco, both indoors and outdoors.
• Fulvic is a fulvic acid supplement that we recommend for further increasing and improving yields, in addition to the base nutrients.
• FlashClean optimizes substrate health/condition and mineral availability, even when you already have a good harvest.
• Ripen Use on its own during the last 10 days to increase flowering.
• TrikoLogic provides beneficial microorganisms in the root zone, TrikoLogic S adds enhanced protection and increased performance, especially at high temperatures.

Feeding program and selection

Explore TriPart. Dosages depend on the specific product, substrate, and growth stage. Follow the label and official feeding charts.

Terra Aquatica Fulvic, fulvic acids

Fulvic from Terra Aquatica, also known as Diamond Nectar, is a fulvic acid supplement. See how to use it alongside your main feeding program and the available sizes.

• ultra-pure, 100% natural biostimulant
• improved root development
• healthier, more disease-resistant plants
• improved aroma and flavor quality
• increased essential oil production
• significantly higher yields

How to use Fulvic:

For watering:

• when the first leaves appear: 20 ml per 10 L of water
• during the vegetative phase: 20 ml per 10 L of water
• during the pre-flowering phase: 20 ml per 10 L of water

As a foliar spray:

• when the first leaves appear: 30 ml per 10 L of water
• during the vegetative phase: 30 ml per 10 L of water
• during the pre-flowering phase: 30 ml per 10 L of water

Use Fulvic with:

• all nutrients, mineral or organic, from GHE or other brands
• any substrate, hydroponics, or outdoor growing

Feeding program and selection

Explore Terra Aquatica fertilizers and supplements. Adjust the dosages to the specific product, substrate, and growth stage. Follow the label and official feeding charts.

Terra Aquatica FinalPart, late-flowering fertilizer

FinalPart, also known as Ripen, is a late-flowering fertilizer. Use it on its own. See how to use it and how it differs from FlashClean.

Standalone feeding in late flowering

Use FinalPart on its own, without adding base nutrients or other bloom boosters at the same time. FlashClean serves a different purpose and is applied separately according to the schedule.

• accelerates the ripening process
• increases yield and flavor/aroma intensity
• increases the production of essential oils and active ingredients
• eliminates excess nutrients, which improves flavor

​How to use FinalPart:

• For growing in hydroponics: Replace the old nutrient solution with pH-adjusted water, add up to 5ml. FinalPart per 1L of water to match or slightly exceed your previous EC (up to 2.6) and mix well. Maintain for 10 days or as needed, then use FlashClean® to finish or harvest directly.
• For growing in coco: Add up to 5ml. FinalPart to 1L of water with adjusted pH to match or slightly exceed your previous EC (up to 2.6) and mix well. Apply for 12-13 days or as needed, then use FlashClean® to finish or harvest directly. 
• For growing in soil: Add up to 4ml. FinalPart to 1L of water with adjusted pH to match or slightly exceed your previous EC (up to 2.0). Apply until the leaves turn yellow and/or ripening is satisfactory. This may take 10 to 20 days. Then use FlashClean® to finish or harvest directly.
• Experts can use FinalPart® to manipulate water stress to maximize the concentration of active ingredients and minimize splitting in soft fruit crops: aim to maintain EC=2.6mS in hydroponics and EC=2.0mS in soil cultivation.

Note: Dissolve the desired amount of FinalPart in water with adjusted pH (between 5.5 and 6.5) and mix well! 

Use FinalPart with:

• Always use FinalPart on its own!
• Do not combine with other nutrients, fertilizers or additional booster supplements while using FinalPart, as it contains everything the plant needs to mature and complete its life cycle!
• FlashClean: FlashClean helps FinalPart reach its full potential.

1. Before applying FinalPart, FlashClean removes all residual nitrogen or other mineral salts from the substrate.
2. After you have finished using FinalPart, a flush with FlashClean can help improve the taste of your harvest.

Feeding program and selection

Explore Terra Aquatica fertilizers and supplements. Doses depend on the specific product, substrate, and growth stage. Follow the label and official feeding charts.

Terra Aquatica Pro Bloom, flowering booster

Concentrated Pro Bloom flowering booster from Terra Aquatica. See its dosage and purpose as an additive to base nutrients.

• increases flowering and growth by up to 20%
• increases calcium absorption
• increases leaf size
• activates microbial life and stimulates plants’ immune systems

How to use Pro Bloom:

Only during flowering / fruiting!

• To add to water or nutrient solution (in hydroponics, coco or soil): 2 ml per 10 L of water

• If necessary, dilute for use as a foliar spray, but avoid spraying the flowers: 1 ml per 10 L of water

Use Pro Bloom with:

• any plants
• any substrates, hydroponics or outdoor growing

Nutrient schedule and selection

Browse Terra Aquatica fertilizers and supplements. Adjust dosages according to the specific product, substrate and growth stage. Follow the label and official feeding charts.

Terra Aquatica FlashClean, salt removal

FlashClean, also known as FloraKleen, is a solution for mineral salt buildup. See how to use it for maintaining substrates and nutrient systems.

• prevents irrigation system drip emitters from clogging
• protects plants from stress and root damage
• balances nutrients
• addresses so-called nutrient lockout
• nourishes microbial life and refreshes soil and coco
• boosts growth in the final stage (especially with FinalPart)

How to use FlashClean: 

Unlike other “flush” products on the market, FlashClean is not an acid, contains no enzymes, and does not flush magnesium or other mineral supplements out of your system, making it uniquely versatile: you can treat your plants with it at any time during growth or flowering, but no more than once every two weeks!

In recirculating hydroponic systems:

• To refresh before changing nutrients (including before FinalPart): add 1.5 to 3ml/L of FlashClean to the existing nutrient solution and let the system circulate for 24 hours before draining and replacing it with fresh nutrient solution. Use the lower dosage for young or delicate plants and the higher dosage for established plants / those close to harvest.
• After overfeeding or nutrient "lockout": drain the old nutrient solution, add 1.5 to 3ml/L of FlashClean to pH-adjusted water (you don't need to fill the entire reservoir, just enough for the system to circulate and operate freely). Let it circulate for 24 hours before draining and adding fresh nutrient solution. Use the lower dosage for young or delicate plants and the higher dosage for established plants / those close to harvest.
• For a final "flush" (rinse) (after FinalPart): drain the old nutrient solution, add 1.5 to 3ml/L of FlashClean to pH-adjusted water (you don't need to fill the entire reservoir, just enough for the system to circulate and operate freely). Let it circulate during the last two days before harvesting, to increase sugar levels in the plants instead of losing aroma and active ingredient content through a longer water "flush".

In soil, coco, or another substrate (expanded clay, perlite): 

• To refresh before changing nutrients (including before FinalPart and after overfeeding or nutrient "lockout": every 15 days (or when needed after lockout, etc.): fill a watering can with fresh, pH-adjusted water and add 1.5 to 3ml/L of FlashClean. Water until it runs into the saucer / out of the bottom of the pot. Resume your regular feeding schedule at the next watering. Use the lower dosage for young or delicate plants and the higher dosage for established plants / those close to harvest.
• For a final "flush" (rinse) (after FinalPart): add 3ml/1L of water FlashClean instead of base nutrients during the last two days before harvesting, to increase sugar levels in the plants instead of losing aroma and active ingredient content through a longer water "flush".

Note: with FloraKleen you can treat your plants at any time during growth or flowering, but no more than once every two weeks!

Use with: any fertilizers and substrates, but especially with FinalPart:

• FlashClean helps FinalPart reach its full potential. By flushing nitrogen and other mineral salts from the substrate, FinalPart will work more effectively, mobilizing nitrates and improving the crop's final aroma/flavor.
• Before harvest, instead of 10 days of "flushing" with water, try 2 with FlashClean, - growers around the world do it because 8 days of harvest in commercial production is a big bonus!

Feeding program and selection

Browse Terra Aquatica nutrients and supplements. Adjust dosages to the specific product, substrate, and growth stage. Follow the label and official feeding charts.

Terra Aquatica NovaMax Grow, liquid fertilizer for growth

Concentrated one-part fertilizer NovaMax Grow, also known as FloraNova Grow. For vegetative feeding in soil, coco, and hydroponics.

Selection and combination

NovaMax, also known as FloraNova, offers separate one-part formulas: Grow for vegetative growth and Bloom for flowering. Choose the formula for the relevant stage and follow the schedule on the packaging.

• the most concentrated 1-part fertilizer for growth on the market
• everything your plants need in just 1 bottle
• no need for supplements (CalMag / PK / trace elements)
• very economical 
• works well with every type of plant

How to use NovaMax Grow:

• Shake well before each use and mix thoroughly with water!

For growing in soil:

• when the first roots develop: 1ml per 10L of water
• when the first leaves appear: 8ml per 10L of water
• during the vegetative stage: 12ml per 10L of water
• during the pre-flowering stage: 8ml per 10L of water

For growing in hydroponics and coco:

• when the first roots develop: 3ml per 10L of water
• when the first leaves appear: 10ml per 10L of water
• during the vegetative stage: 15ml per 10L of water
• during the pre-flowering stage: 10ml per 10L of water

You can use Flora Nova Grow with:

• Works for growing all plants and in all substrates - soil, hydroponics, coco, both indoors and outdoors.
• Fulvic is a fulvic acid supplement that we recommend for further increasing and improving your harvest, in addition to your main fertilizers.
• TrikoLogic provides beneficial microorganisms in the root zone, while TrikoLogic S offers increased protection and enhanced performance, especially in high temperatures.
• General Organics supplements: The General Organics range includes high-quality organic supplements for fine-tuning and improving your harvest.

Feeding program and selection

Explore NovaMax Duo. Doses depend on the specific product, substrate, and growth stage. Follow the label and official feeding charts.

TriPart Micro Hard Water, micronutrients for hard water

Terra Aquatica TriPart Micro HW is the Micro component for hard water. Use it with TriPart Grow and Bloom according to the selected feeding schedule.

Selection and combination

TriPart is a system comprising Micro, Grow, and Bloom. Choose Micro HW or SW according to your water; the proportions of the three components change as the plants develop. Add the components separately to the water and mix between each addition.

• for hard/tap water
• "the building block", providing micro- and sub-micronutrients and some additional macronutrients.
• use TriPart® Micro as directed throughout the entire growth period and the entire flowering period

How to use TriPart®:

• Shake the bottles well before each use! 
• Add each part separately, always mixing well afterward!
• Always add the components in this order: Micro - Grow - Bloom!!!
• If using the same measuring cup/pitcher, rinse it thoroughly before adding the next part and after use!

How to use TriPart Micro:

For growing in soil:

• when the first roots develop: 2 ml per 10 L of water
• when the first leaves appear: 6 ml per 10 L of water
• during vegetative growth: 10 ml per 10 L of water
• during pre-flowering: 15 ml per 10 L of water
• during flowering: 14 ml per 10 L of water

For growing in hydroponics and coco:

• when the first roots develop: 5 ml per 10 L of water
• when the first leaves appear: 10 ml per 10 L of water
• during vegetative growth: 12 ml per 10 L of water
• during pre-flowering: 20 ml per 10 L of water
• during flowering: 16 ml per 10 L of water

Use TriPart® with:

• TriPart works for growing all plants and in all substrates - soil, hydroponics and coco, both indoors and outdoors.
• Fulvic is a fulvic acid supplement that we recommend for further increasing and improving the harvest, in addition to the base nutrients.
• FlashClean optimizes substrate health/condition and mineral availability, even with an already good harvest.
• Ripen Use on its own during the final 10 days to increase flower production.
• TrikoLogic provides beneficial microorganisms in the root zone, while TrikoLogic S adds enhanced protection and greater productivity, especially at high temperatures.

Feeding program and selection

Explore TriPart. Adjust doses according to the specific product, substrate and growth stage. Follow the label and official feeding charts.

Terra Aquatica NovaMax Bloom, liquid bloom fertilizer

One-part NovaMax Bloom fertilizer, known as FloraNova Bloom. For feeding during flowering in soil, coco and hydroponic systems.

Choosing and combining products

NovaMax, also known as FloraNova, offers separate one-part formulas: Grow for vegetative growth and Bloom for flowering. Choose the formula for the relevant phase and follow the schedule on the packaging.

• the most concentrated one-part bloom fertilizer on the market
• everything your plants need in just one bottle
• no need for supplements (CalMag / PK / trace elements)
• very economical 
• works well with every type of plant

How to use NovaMax Bloom:

• Shake well before each use and mix thoroughly with water!

For growing in soil:

• during pre-flowering: 8 ml per 10 L of water
• during flowering: 20 ml per 10 L of water

For growing in hydroponics and coco:

• during pre-flowering: 10 ml per 10 L of water
• during flowering: 25 ml per 10 L of water

You can use NovaMax Bloom with:

• Works for growing all plants and in all substrates - soil, hydroponics, coco, both indoors and outdoors.
• General Organics supplements: The General Organics range includes high-quality organic supplements to fine-tune and improve your harvest.
• FlashClean optimizes substrate health/condition and mineral availability, even for an already good harvest.
• Ripen use on its own during the final 10 days to increase flower production.

Feeding schedule and selection

Explore NovaMax Duo. Dosages depend on the specific product, substrate and growth phase. Follow the label and official feeding charts.

Terra Aquatica TriPart Grow, growth component

TriPart Grow, known as FloraGro, is part of the Terra Aquatica nutrient system. Use it together with Micro and Bloom according to the growth stage.

Selection and combination

TriPart is a system consisting of Micro, Grow, and Bloom. Choose Micro HW or SW according to your water; the proportions of the three components change as the plants develop. Add the components separately to the water and stir between each addition.

• stimulates structural and vegetative growth
• builds strong roots 
• provides most of the nitrogen, potassium, and secondary minerals in TriPart®
• use larger amounts during the growth period and smaller amounts during flowering

How to use TriPart®:

• Shake the bottles well before each use! 
• Add each part separately, always stirring well afterward!
• Always add the components in this order: Micro - Grow - Bloom!!!
• If you use one measuring cup/pitcher, rinse it thoroughly before adding the next part and after use!
• If you water with hard/tap water (more than 70mg of calcium/1L), use with GHE - T.A. - TriPart Micro Hard Water 1L (FloraMicro H/W)
• If you use reverse osmosis, use with GHE - T.A. - TriPart Micro Soft Water 1L (FloraMicro S/W)

How to use TriPart Grow:

For growing in soil:

• when the first roots develop: 2ml per 10L of water
• when the first leaves appear: 6ml per 10L of water
• during vegetative growth: 15ml per 10L of water
• during pre-flowering: 15ml per 10L of water
• during flowering: 7ml per 10L of water

For growing in hydroponics and coco:

• when the first roots develop: 5ml per 10L of water
• when the first leaves appear: 10ml per 10L of water
• during vegetative growth: 18ml per 10L of water
• during pre-flowering: 20ml per 10L of water
• during flowering: 8ml per 10L of water

Use TriPart® with:

• TriPart works for growing all plants and in all substrates - soil, hydroponics, coco, both indoors and outdoors.
• Fulvic is a fulvic acid supplement that we recommend for further increasing and improving yields, in addition to the core nutrients.
• FlashClean optimizes substrate health/condition and mineral availability, even when you already have a good harvest.
• Ripen use on its own during the last 10 days to increase flowering.
• TrikoLogic provides beneficial microorganisms in the root zone, while TrikoLogic S adds enhanced protection and increased performance, especially at high temperatures.

Feeding schedule and selection

Explore TriPart. Dosages depend on the specific product, substrate, and growth stage. Refer to the label and official feeding charts.

Terra Aquatica Pro Roots, root stimulator

Concentrated root stimulator Pro Roots from Terra Aquatica. See the dosage, application period, and how it differs from Root Booster.

• larger and healthier root system
• greater resistance to mold and fungi 
• healthier, more vigorous plants

How to use Pro Roots:

Pro Roots is very powerful: for best results, use on cuttings, seeds, and transplanted plants for 15 days, then switch to Fulvic to stimulate abundant fine-root growth.

• To add to water or nutrient solution (in hydroponics, coco, or soil): 2 ml per 10 L of water

• If necessary, dilute for use as a foliar spray: 1 ml per 10 L of water

Use Pro Roots with:

• any plants
• any substrates, hydroponics, or outdoor growing

Nutrient program and selection

Explore Terra Aquatica fertilizers and supplements. Dosages depend on the specific product, substrate, and growth stage. Follow the label and official feeding charts.

Terra Aquatica pH+, pH increaser

Liquid Terra Aquatica pH+ regulator for raising the pH of irrigation water and nutrient solution. For gradual adjustment with measurement.

Which form should you choose?

This is a liquid regulator. Explore Terra Aquatica pH regulators to choose the adjustment direction and form.

How to adjust pH

pH+ raises pH. Measure the solution, add gradually according to the label, mix well, and measure again. Do not determine the amount based only on the reservoir volume, as the source water and nutrient solution affect the adjustment required.

Use appropriate protective equipment according to the label. Do not mix concentrated pH regulators with each other or directly with concentrated fertilizers.

Nutrient program and selection

Explore Terra Aquatica fertilizers and supplements. Adjust application rates to the specific product, substrate, and growth stage. Follow the label and official feeding charts.

Terra Aquatica Protect, foliar application concentrate

Terra Aquatica Protect is a foliar application concentrate. See the dilution rate, spraying restrictions, and directions for use.

• protects against insects and pathogens
• strengthens and enhances plants’ defense systems

How to use Protect:

Avoid spraying flowers and rinse thoroughly before eating crops that have been sprayed recently! Do not apply more than 3 times per cycle!

For foliar spray: 5 ml in 1 L of clean water and use once during each of the following stages:

• when the first leaves appear
• during the growth stage
• during the pre-flowering stage

Use Protect with:

• all types of plants
• all types of substrate, hydroponics, or outdoor growing

Nutrient program and selection

Explore Terra Aquatica fertilizers and supplements. Adjust application rates to the specific product, substrate, and growth stage. Follow the label and official feeding charts.

Terra Aquatica Silicate, silicate supplement

Silicate, known as Mineral Magic, is a powdered silicate supplement from Terra Aquatica. See application instructions and mixing restrictions.

• provides a naturally soluble form of silicon that enters plant cells and builds a hardened shield against disease and insect attacks
• the natural silicate colloids improve the cation exchange capacity of nutrient solutions, improving nutrient availability for your plants
• stabilizes the pH and EC of the nutrient solution, reducing stress for fast-growing plants
• protects against metal toxicity
• contains more than 60 minerals, which add more nutrients to help plants thrive

How to use Silicate:

• in nutrient solution: 4 g per 10 L
• for foliar spray: 4 g per 10 L
• If using together with TrikoLogic / TrikoLogic S, apply Silicate only as a foliar application, to avoid delaying the establishment of beneficial microorganism populations in the substrate.!!!

Application charts here!

Nutrient program and selection

Explore Terra Aquatica nutrients and supplements. Adjust dosages to the specific product, substrate, and growth stage. Follow the label and official feeding charts.

GHE FloraDuo Grow HW, fertilizer for hard water

FloraDuo Grow HW is the hard-water component of the two-part line now known as DualPart. Use according to the package label.

Selection and pairing

The two-part DualPart range, also known as FloraDuo, combines Grow and Bloom. Their ratio follows the growth stage, and the Grow version is selected according to the water. The DualPart Coco line is a separate system for coco.

• for hard/tap water
• DualPart uses several mineral forms, so your plants always have access to the elements they need in the right form during growth and flowering.
• The formula includes bioactivators that improve overall plant health, resistance to pathogens and nutrient absorption.

How to use DualPart:

• Shake the bottles well before each use! 
• Add each part separately, always stirring well afterward!
• If using one measuring cup or jug, rinse it thoroughly before adding the next part and after use!
• For accurate dosing of the two-part fertilizer, you can look here!

Use GHE DualPart with:

• Works well with all kinds of plants and substrates, in hydroponics, soil, or outdoor growing.
• Fulvic is a fulvic acid supplement that we recommend for further increasing and improving yields, in addition to the base nutrients.
• TrikoLogic provides beneficial microorganisms in the root zone, TrikoLogic S adds increased protection and extra performance, especially at high temperatures.
• FlashClean optimizes substrate health and mineral availability, even when you already have a good harvest.
• FinalPart use on its own during the last 10 days to increase flower production.

Feeding program and selection

Explore DualPart Duo. Dosages should be adjusted to the specific product, substrate, and growth stage. Follow the label and official feeding charts.

TriPart Micro Soft Water, for soft and reverse osmosis water

Terra Aquatica TriPart Micro SW is the Micro component for soft or reverse osmosis water. Combine it with TriPart Grow and Bloom according to the feeding schedule.

Selection and combination

TriPart is a system comprising Micro, Grow, and Bloom. Choose Micro HW or SW according to your water; the proportions of the three components change as the plants develop. Add the components separately to the water and mix between additions.

• for use with reverse osmosis water
• “the building block,” providing micronutrients and sub-micronutrients, as well as some additional macronutrients.
• Use TriPart® Micro as directed throughout the entire growing and flowering periods

How to use TriPart®:

• Shake the bottles well before each use! 
• Add each part separately, always mixing well afterward!
• Always add the components in this order: Micro - Grow - Bloom!!!
• If using one measuring cup/jug, rinse it thoroughly before adding the next part and after use!

How to use TriPart Micro:

For growing in soil:

• when the first roots develop: 2ml per 10L of water
• when the first leaves appear: 6ml per 10L of water
• during vegetative growth: 10ml per 10L of water
• during pre-flowering: 15ml per 10L of water
• during flowering: 14ml per 10L of water

For growing in hydroponics and coco:

• when the first roots develop: 5ml per 10L of water
• when the first leaves appear: 10ml per 10L of water
• during vegetative growth: 12ml per 10L of water
• during pre-flowering: 20ml per 10L of water
• during flowering: 16ml per 10L of water

Use TriPart® at:

• TriPart works for growing all plants and in all substrates - soil, hydroponics, coco, indoors and outdoors.
• Fulvic is a fulvic acid supplement that we recommend for further increasing and improving your harvest, in addition to your base nutrients.
• FlashClean optimizes substrate health/condition and mineral availability, even when you already have a good harvest.
• Ripen use on its own during the last 10 days to increase flowering.
• TrikoLogic provides beneficial microorganisms in the root zone, TrikoLogic S adds increased protection and improved performance, especially at high temperatures.

Feeding program and selection

Explore TriPart. Adjust dosages to the specific product, substrate, and growth stage. Follow the label and the official feeding charts.