Electronic ballasts and power supply components

LUMii Digita 600W – electronic ballast

LUMii Digita 600W Electronic Ballast is an electronic/digital ballast/choke with dimming capability (reducing or increasing the power) for 600W high-pressure sodium (HPS) or metal halide (MH) lamps/bulbs. LUMii Digita 600W Electronic Ballast is an electronic choke with a built-in microprocessor that controls the unit and operates at a higher frequency than standard analog chokes. Greater efficiency means more light for your plants. It allows the bulb to ignite quickly, thereby saving energy. Quieter than any other choke. Measurements indicate up to 30% greater brightness than analog chokes. An electronic choke solves the problem of irregular mains voltage! Analog chokes age over time, become noisy and consume more electricity, heat up more and more, while their light output decreases. This does not happen with electronic chokes; they maintain the same level of light output and efficiency. To ensure safe operation, the LUMii ballast is programmed to switch off in the event of a short circuit, if the bulb burns out, or if no bulb is present.

​

• operating modes with a 600W lamp/bulb: 250W, 400W, 600W
• operating modes with a 400W lamp/bulb: 250W, 400W, do not dim above 400W!
• operating modes with a 250W lamp/bulb: 250W, do not dim above 250W
• Supply voltage: 220–240V 50Hz
• Amperage: 1.8A
• Input power: 620W
• Output power: 600W
• Efficiency: >0.99 THD
• Harmonic distortion: <10%, Imax:Iavg. <1.7
• Ambient temperature: from -25°C to 70°C
• Temperature rise (Δt): 29°C
• Protection rating: >IP23
• ​Dimensions L/W/H: 43/38/18.5cm
• Weight: 3.125kg

Disconnect the power supply when changing the lamp!

LUMii BLACK 600W – electronic ballast

LUMii BLACK 600W Electronic Ballast is an electronic/digital dimmable ballast (for reducing or increasing the power) for 600W high-pressure sodium (HPS) or metal halide (MH) lamps/bulbs. 

• 4 operating modes: 250W, 400W, 600W, 600W boost (+10%)
• aluminum housing with wall-mounting option.
• cable with Schuko plug for connecting to the mains
• IEC connector (computer-style) for connecting the lamp
• Voltage: 240V
• Amperage: 2.9A
• Power cable: 2 m
• Dimensions L/W/H: 29/12/6 cm
• Weight:3 kg
• Warranty: 1 year

The electrical fuse is located under the power connector - please check the fuse if the ballast is not working!

• operating modes with a 600W lamp/bulb: 250W, 400W, 600W, 600W boost (+10%)!
• operating modes with a 400W lamp/bulb: 250W, 400W, do not "dim" above 400W!
• operating modes with a 250W lamp/bulb: 250W, do not "dim" above 250W

Disconnect the power supply when changing the lamp!

Maxibright Warpdrive 600W – ballast

Maxibright Warpdrive 600W Power Pack is a budget electronic ballast designed for use with 600W high-pressure sodium (HPS) or metal halide (MH) lamps/bulbs. It does not have a "dimming" function (increasing or decreasing the power)!

• operates silently
• extremely lightweight and compact
• works with HPS and MH bulbs

Note: the product is supplied with a UK plug* (UK-standard plug) and IEC-14 female connector*!

Features:

• power: 600W
• dimming capability: none
• ​voltage: 240V
• frequency: 50/60Hz
• Imax: 3.5A
• weight: 1.135kg
• dimensions: 241/100/60mm
• warranty: 1 year

Note: the product is supplied with a UK plug* (UK-standard plug) and IEC-14 female connector*!

Lumatek 600W 240V – electronic ballast

LUMATEK 600W 240V CONTROLLABLE BALLAST is a digitalcontrollable ballast that can operate with both high-pressure sodium (HPS) and metal halide (MH) lamps. It provides stable and precise voltage to the lamp, creating higher PAR/PPF output while still being much more energy-efficient than most ballasts on the market! The ballast features soft-start technology and a soft-dimming mechanism! It can be controlled externally with LUMATEK Control Panel Plus 2.0 (sold separately).

• output power: 600W
• 4 operating modes: 250W - 400W -  600W - 660W
• generates very little heatcompared to other ballasts on the market
• operates silently
• Protection from short circuit, overheating, overvoltage/undervoltage, end of lamp life!
• 5-year warranty!

The electronic ballast is a solution to the problem of irregular mains voltage! Magnetic ballasts age over time, start making noise and consume more electricity, heat up more and more, while brightness decreases. This does not happen with digital ballasts - they maintain the same level of output and efficiency. LUMATEK ballasts are programmed for a "soft start", meaning that a voltage and current spike is not needed to start the lamp, which extends the bulb's lifespan, does not strain the electrical system, and allows a larger number of ballasts to be safely started simultaneously. 

Full technical specifications:

• output power: 600W
• input current: 240V, 50/60Hz
• max. amperage: 2.7A
• power factor*: > 0.99
• efficiency: 96%
• THD*: < 8%
• dimmable / 4 operating modes: 250W - 400W -  600W - 660W
• compatible with: 250W, 400W, 600W HPS / MH lamps
• operating frequency: high frequency
• generates very little heatcompared to other ballasts on the market
• operates silently
• Protection against short circuits, overheating, overvoltage/undervoltage, end of lamp life!
• dimensions: 310 x 114 x 81 mm
• weight: 2.7 kg
• warranty: 5 years

Operating instructions:

• For use with a 250W HPS or MH lamp: The ballast must always be in 250W mode only!
• For use with a 400W HPS or MH lamp: The ballast must never be in 600W or 660W mode! 
• For use with a 600W HPS or MH lamp: Start in 600W modeand only after the lamp has fully warmed up (about 10 min. of operation), you can switch to 660W mode!

1. Disconnect the power when replacing the lamp!
2. LUMATEK recommends replacing the lamp after 6-12 months of use!
3. VERY IMPORTANT: allow the lamp to cool completely (20-30 min.) before switching it on again! (Otherwise, its lifespan will be shortened.)
4. The lamp should also not be switched off before it has reached full power!

LUMii Digita 1000W Electronic Ballast – ballast

LUMii Digita 1000W Electronic Ballast is an electronic/digital ballast/choke with dimming capability (increasing or decreasing the power) for 1000W high-pressure sodium (HPS) or metal halide (MH) lamps/bulbs. LUMii Digita 1000W Electronic Ballast is an electronic ballast with a built-in microprocessor that controls operation at a higher frequency than standard analog ballasts. Higher efficiency - more light for your plants. It allows the bulb to ignite quickly, thereby saving energy. Quieter than any other ballast. Measurements show up to 30% more brightness than analog ballasts. The electronic ballast solves the problem of irregular mains voltage! Analog ballasts deteriorate over time: they start to make noise and consume more electricity, heat up increasingly, while their brightness decreases. This does not happen with electronic ballasts; they maintain the same level of output and efficiency. To ensure safe operation, the LUMii ballast is programmed to switch off in the event of a short circuit, bulb burnout, or if no bulb is fitted.

​

• Operating modes with a 1000W lamp/bulb: 250W, 400W, 600W, 1000W
• Operating modes with a 600W lamp/bulb: 250W, 400W, 600W, do not dim above 600W!
• Operating modes with a 400W lamp/bulb: 250W, 400W, do not dim above 400W!
• Operating modes with a 250W lamp/bulb: 250W, do not dim above 250W
• Supply voltage: 220–240V 50Hz
• Amperage: 4.6A
• ​Dimensions L/W/H: 48/39.5/24.5cm
• Weight: 5.2kg
• Warranty: 1 year

Disconnect the power before changing the lamp!

Lumatek 1000W 240V - electronic ballast

LUMATEK 1000W 240V CONTROLLABLE BALLAST is a digitally controllable ballast that can operate with both high-pressure sodium (HPS) and metal halide (MH) lamps. It provides stable, precise voltage to the lamp, delivering higher PAR/PPF output while still being much more energy-efficient than most ballasts on the market! The ballast features intelligent start technology and a soft-dimming mechanism! It can be controlled externally with LUMATEK Control Panel Plus 2.0 (sold separately).

• output power: 1000W
• 4 operating modes: 600W - 750W - 1000W - 1000W SL
• generates very little heat compared to other ballasts on the market
• operates silently
• Protection against short circuits, overheating, overvoltage / undervoltage, end of lamp life!
• 5-year warranty!

The electronic ballast is a solution to the problem of irregular mains voltage! Magnetic ballasts age over time, start making noise and consume more electricity, heat up more and more, while light output decreases. This does not happen with digital ballasts - they maintain the same level of light output and efficiency. LUMATEK ballasts are programmed for a "soft start", meaning the lamp does not require a voltage and current spike to start, which extends the bulb's life, does not overload the electrical system and allows a larger number of ballasts to be safely started simultaneously. 

Full technical specifications:

• output power: 1000W
• input current: 240V, 50/60Hz
• max. amperage: 4.7A
• power factor*: > 0.99
• THD*: < 10%
• dimmable / 4 operating modes: 600W - 750W - 1000W - 1000W SL
• compatible with: 600W, 750W, 1000W HPS / MH lamps
• operating frequency: high frequency
• generates very little heat compared to other ballasts on the market
• operates silently
• Protection against short circuit, overheating, overvoltage/undervoltage, end of lamp life!
• dimensions:  318 x 166 x 96mm
• weight: 4.25kg
• warranty: 5 years

Operating instructions:

• for use with a 600W HPS or MH lamp: The ballast must always be in 600W mode only!
• for use with a 750W HPS or MH lamp: The ballast must never be in 1000W or 1000W SL mode! 
• for use with a 1000W HPS or MH lamp: Start in 1000W modeand only after the lamp is fully warmed up (after about 10min. of operation), can you switch to 1000W SL mode!

1. Disconnect the power when replacing the lamp!
2. LUMATEK recommends replacing the lamp after 6-12 months of operation!
3. VERY IMPORTANT: the lamp must cool down completely (20-30min.) before being switched on again! (Doing otherwise shortens its lifespan).
4. The lamp must also not be switched off before it has reached full power!

Gavita Pro 1000e DE - kit

• The professional choice of lighting fixture.
• Includes a Gavita Pro 1000W 400V DE EL lamp with an output of 2100 μmol s-1.
• Covers more than 2 sq. m. with 2000μmol s-1.
• The most efficient and highest-output model on the market (efficiency class: A++)
• Compatible with the Gavita Master controller.
• Easy installation - plug and play.

Gavita Pro 1000e DE

The best lighting just got better

The new Gavita Pro e-series models are upgraded versions of Gavita's existing classic range of lighting fixtures, now also compatible with and adapted for complete lighting control via the Gavita Master controller. You can now control the light with just a few simple button presses.

Gavita Pro HPS systems are the professional standard for efficient lighting. Operating on standard 240V, they power high-voltage (400V) electronic horticultural lamps, which outperform conventional lamps in spectrum, light output and efficiency during prolonged use.

• Fully encapsulated wiring with a GORE-TEX ventilation outlet, no moving parts, completely silent and with almost imperceptible heat emission.
• Compatible with high-frequency electronic (400V) horticultural lamps, which emit 10-25% more light.
• Highly efficient - retain more than 95% of their reflective properties, so you only need to replace the bulb once a year.
• Replaceable Gavita HR96 reflector with 96% reflectivity for maximum efficiency.
• Controlled output: Use a single knob to increase or decrease the amount of light supplied, according to the conditions or growth stages of your plants.
• A “soft” dimming system allows the emitted light to be gradually reduced, eliminating stress on the lamp when the power supplied to it is changed.
• Equipped with high-frequency (>100kHz) Gavita electronics.
• No problems caused by electromagnetic interference.

Specifications here!

Gavita Pro 6/750e DE FLEX - kit

• New! The right light for your room size.
• Includes a Gavita Pro 750W 400V DE EL lamp with an output of 1500 μmol s-1.
• Illuminates more than 1.5 sq. m with 1000μmol s-1.
• Highly efficient operating range from 600 to 825W.
• Compatible with the Gavita Master controller.
• Easy installation - plug and play.

Gavita Pro 6/750e DE FLEX

The best lighting just got better

The new Gavita Pro e-series models are improved versions of Gavita's existing classic range of lighting modules, now compatible with and adapted for complete lighting control via the Gavita Master controller. You can now control the light with just a few simple button presses.

The new addition to the Pro line's e-series is the 6/750e DE FLEX module, which uses the recently developed Gavita Pro 750W DE 400V EL lamp. The lamp's operating range is 400-825W, filling the huge gap between 600 and 1000-watt lamps. We called it 6/750 DE FLEX because it is equally effective when operating at 600 watts and at 750 watts. In many cases, it is a suitable replacement for a 1000-watt ventilated module running at 825W, which can save you up to 20% on electricity. The lamp's output at 750W is 1500 μmol s-1(2μmol s-1 per watt).

Gavita Pro HPS modules are the professional standard for efficient lighting. Operating on standard 240V, they power high-voltage (400V) electronic horticultural lamps that outperform conventional lamps in spectrum, light output and efficiency during prolonged use.

• Fully encapsulated wiring with a GORE-TEX ventilation outlet, no moving parts, completely silent operation and almost imperceptible heat emission.
• Compatible with high-frequency electronic (400V) horticultural lamps that provide 10-25% greater light output.
• Highly efficient - retain more than 95% of their reflective properties, so you only need to replace the bulb once a year.
• Replaceable Gavita HR96 reflector with 96% reflectivity for maximum efficiency.
• Controlled output: Use a single knob to increase or decrease the amount of light output according to the conditions or growth stages of your plants.
• Soft-dimming system that gradually reduces the light output, eliminating stress on the lamp when changing the power supplied to it.
• Equipped with high-frequency (>100kHz) Gavita electronics.
• No problems caused by electromagnetic interference.

Specifications here!

Gavita Pro 600 SE Classic – kit

• For use with 600W EL lamps only
• No acoustic resonance
• Up to 8% more light from the lamp
• Efficiency after 5000 hours of operation - >95%
• System design and concept by Gavita
• Sealed (class I) with a ventilation outlet made of Gore Tex
• Microprocessor-controlled with an LED indicator for ballast status
• Professional UV-resistant wiring
• Extremely low heat output and optimal cooling

Gavita Pro 600 SE

Gavita Pro 600 is the first 240-volt electronic ballast to power professional 600W 400V EL (electronic) lamps. These lamps have the best PAR output, an improved spectrum, and the best retention of light efficiency (>95% PAR after one year of operation). The lamp is the most efficient horticultural lamp on the market and the only lamp specifically designed for electronic ballasts.

Gavita Pro 600 is available as a complete kit including a professional HortiStar HR 96 reflector, or as a separate ballast, ideally suited to the Gavita Triple Star reflector. The ballast is fully enclosed and has no cooling fan, as it emits very little heat during operation. This allows for safe and easy installation close to your lamp, which in turn reduces the amount of electromagnetic interference reaching the ballast and significantly extends its lifespan and efficiency. The kit is easy to install using two bolts.

Specifications here!

Gavita Pro 1000 DE Classic – kit

• For use only with 1000W 400V DE EL lamps
• No acoustic resonance
• Up to 8% more light from the lamp
• Efficiency after 5000 hours of operation - >95%
• System design and concept by Gavita
• Sealed (class I) with a Gore Tex ventilation outlet
• Microprocessor-controlled with an LED ballast status indicator
• Professional UV-resistant wiring
• Driver efficiency at full power - 95-96%
• Exceptionally low heat output and optimal cooling

Gavita Pro 1000 DE

Gavita Pro 1000 DE is the first 240-volt electronic ballast to power professional 1000W 400V DE EL (electronic) lamps. These lamps provide the best PAR output, an improved spectrum, and the best light efficiency retention (>95% PAR after one year of operation). The lamp is the most efficient horticultural lamp on the market and the only lamp specifically designed for electronic ballasts.

Gavita Pro 1000 is available as a complete kit including a professional HortiStar HR 96 1000 DE reflector, or as a separate ballast. The ballast is fully enclosed and has no cooling fan, as it emits exceptionally little heat during operation. This allows for safe and easy installation close to your lamp, which in turn reduces the amount of electromagnetic interference reaching the ballast and significantly extends its lifespan and efficiency. The kit is easy to install using two bolts.

Specifications here!

Secret Jardin CARRYIT Ballast Tray

Secret Jardin CARRYIT ballast tray.

• dimensions: 14cm x 43.3cm x 3.5cm
• weight: 368g

Recommended for:

• ballasts measuring: 11cm x 35cm

Hortilux / Philips 1000W – set Hortilux HSE 1000 / Philips Master Greenpower Plus 1000W EL 400V DE lighting set. The Hortilux HSE 1000W lighting fixture is made from high-quality materials and designed for years of trouble-free operation in all types of greenhouses. This fixture offers higher light intensity without compromising energy efficiency. The Hortilux HSE 1000 is extremely compact, minimizing any negative impact on crops. Thanks to the special adapter, installing the lamp and reflector is easy and safe.