Humidifiers and dehumidifiers

Cornwall 6 L, 350 ml/h Humidifier

The Cornwall 6 L humidifier is made from recyclable plastic. It can operate continuously for 16 hours.  Using ultrasonic vibrations, the humidifier breaks water droplets into particles measuring 1 to 5 μm. The particles are then dispersed by a fan. During this process, a large number of anions are produced and released. This allows the appliance to humidify and cool the air. Its main features are as follows:

• Produces a soft, refreshing mist
• Energy efficient
• Quiet 
• Automatic shutoff
• Long service life

• Voltage: 220-240 V; ~ 50Hz
• Power: 25W
• Water tank: 6L
• Maximum: 350ml/h

Mist Maker 3, 1200 ml/h humidifier

Mist Maker 3 air humidifier - 1200ml/h provides the necessary humidity for your plants without emitting heat.

• Creates a mist of fine water droplets using ultrasonic vibrations
• Does not raise the room temperature
• Uses 1200 ml of water per hour
• Power: 68W
• Up to 2000 hours of operation (the ceramic discs are replaceable)
• The set includes a humidifier with 3 ceramic discs and an adapter with a 10m power cable.
• Sold WITHOUT the float. You can purchase it here

The high-quality Mist Maker 3 humidifier is very compact and can easily be installed in rooms of different sizes.

Can be used:

• For growing plants outdoors and indoors
• In aquariums
• Fountains

Its design allows easy cleaning of the ceramic discs to remove limescale buildup or other impurities from the water.

It can be combined with a float, allowing it to be installed in various water tanks.

It is equipped with a water-level sensor that switches off the humidifier when the water level gets too low.

Float for Mist Maker 3 Humidifier

Float for Mist Maker 3

Used to position and keep the humidifier at the optimal depth in water tanks.

Material: plastic

Cornwall 8.5 L, humidifier 350 ml/h

Enhance your surroundings with the Cornwall 8.5L Humidifier - the perfect helper for maintaining optimal humidity in your home or office.

Mist Maker 5, 1600 ml/h humidifier

Mist Maker 5 air humidifier - 1600ml/h provides the humidity your plants need without emitting heat.

• Creates a mist of fine water droplets using ultrasonic vibrations
• Does not raise the room temperature
• Uses 1600 ml of water per hour
• Power: 100W
• Can operate for 2000 hours (the ceramic discs need to be replaced)
• The set includes a humidifier with 5 ceramic discs and an adapter with a 10m power cable.
• Sold WITHOUT the float. You can purchase it here

The high-quality Mist Maker 5 humidifier is very compact and can easily be installed in rooms of various sizes.

It can be used:

• For growing plants outdoors and indoors
• In aquariums
• Fountains

Its design allows the ceramic discs to be easily cleaned of limescale and other deposits from the water.

It can be combined with a float, allowing it to be installed in various water tanks.

It is equipped with a water level sensor that switches off the humidifier when the water level gets too low.

Mist Maker 5, replacement ceramic discs

Replacement ceramic discs for Mist Maker 5

• 5 pieces per pack

Float for Mist Maker 5 humidifier

Float for Mist Maker 5

Used to position and keep the humidifier at the optimal depth in water tanks.

Material: plastic

Monzon Neptune Hydroponics, 5 L/h humidifier

The Monzon humidifier from Neptune Hydroponics is equipped with an automatic mechanism that ensures a sufficient water level from the water inlet, which can be connected to a reservoir or a running water supply. In addition to its autonomy, this model has an unusually high output, with a consumption capacity of 5L/h.

• voltage: 220-240V
• power: 300W
• maximum evaporator capacity: 5L/h
• airflow: ≥ 120m3/h
• spray outlet diameter: φ 110mm
• water particles: ≥ 10µm
• inlet pipe opening size: 13mm
• dimensions: 47 x 24 x 33cm (without the evaporator tube)

TWE-W20A, dehumidifier 20 L/24 h

The TWE-W20A dehumidifier is a model with a capacity of 20L / 24h, with lower energy consumption and quieter operation. It is designed to quickly and effectively reduce humidity in enclosed spaces. It helps reduce and eliminate moisture condensation on floors, walls, ceilings and windows. It protects clothes, leather goods and other sensitive materials from mold and mildew. Suitable for use in homes, offices, storage rooms, doctors' offices, pharmacies, hair salons and beauty salons, libraries, rooms for sports and fitness, garages, attics, basements, pantries, storage facilities, etc.

1. Fast results.
2. Protection against mold and mildew.
3. Low energy consumption.

• power: 260W
• up to 20L / 24h of dehumidification
• setting from 30 to 80% RH in 5% increments and continuous operation mode
• two-speed - quiet and normal speed
• Auto mode
• three-color light indicator for humidity level
• adjustment of the airflow direction
• additional activated carbon filter included
• dimensions H x W x D: 36.0 x 28.5 x 56.4cm
• weight: 14.2kg
• warranty: 2 years

Instructions for use: here*

Benefits:

1. Energy-efficient. With a power consumption of 260W, it is the most energy-efficient dehumidifier for its capacity. It saves money by achieving the desired result in a short time.
2. Automatic mode, humidity setting. It can automatically maintain humidity in the range from 55% to 65%.
   The desired room humidity can also be set manually. The adjustment range is from 30% to 80%; it can also operate continuously.
3. Protection and safety. Features protection against a full tank, automatic defrosting at low temperatures, and a child safety lock. Automatically resumes operation after a power outage. 
4. Additional filter included. The unit comes with an activated carbon filter that absorbs unpleasant odors and harmful gases. The filter is factory-installed.
5. High efficiency. Made using the latest technology, it quickly and visibly removes excess moisture and condensation. Ideal for homes with rooms measuring up to 100m².
6. Large tank. It features a 6.5-liter tank that requires less frequent attention. The dehumidifier can run for longer without stopping, further increasing its efficiency.

Specifications:

• coverage area: up to 100m²
• daily dehumidification: up to 20 L
• airflow: 145m³/h
• noise level: <44dB
• fan speeds: 2 speeds, quiet and normal
• tank capacity: 6.5 L
• power consumption: 260W
• display: yes
• air filter: permanent mesh
• additional air filter: foam
• timer: 24 hours in 1-hour increments
• drain hole: yes
• auto-restart after power failure: yes
• defrosting: yes, automatic
• dimensions H x W x D: 36.0 x 28.5 x 56.4cm
• weight: 14.2kg
• refrigerant: R290
• commercial warranty: 2 years

VDL Monster Fogger, 5 L/h humidifier

VDL Monster Fogger Mist Humidifier – a powerful humidifier suitable for both hobbyists and professionals.

With a capacity of 5000 ml/h and coverage of up to 20 m², this device is the ideal solution for optimal humidity control in greenhouses, florists, mushroom farms and other crops. With autonomous operation and protection against pests, Monster Fogger provides even and effective hydration for successful plant growth.

Technical specifications:

• Diffusion: 5 L/h
• Power: 200W
• Tank: 4.5 L
• Coverage area: 20 m²
• Weight: 7 kg
• Dimensions: 35 x 32 cm

Why choose Monster Fogger?

Monster Fogger not only delivers powerful performance, but is also designed for ease of use. With quick installation and automatic operation, connected directly to the water supply, this unit frees you from daily maintenance. Using reverse-osmosis or distilled water ensures optimal performance and a long service life.

      APPLICATIONS:

• Greenhouses: Maintains constant humidity for a variety of crops.
• Grow rooms: Perfect for small spaces requiring high humidity.
• Floristry: Ideal for delicate plants such as orchids.
• Mushroom production: Provides the humidity needed for optimal growth.

VDL Monster Fogger Mist Humidifier is every gardener’s dream. Whether you’re a hobbyist or a professional, this humidifier offers everything you need for perfect humidity control in your grow space.

This powerful humidifier maintains a constant output of 5000 ml/h and covers up to 20 m². It is suitable for greenhouses, flower crops, mushrooms, and more. Monster Fogger is designed with attention to detail, from the integrated float for automatic operation to the protective pest screen.

The right humidity is a key factor in plant health and growth. Producing 5 liters of mist per hour, this humidifier evenly distributes fresh, fine mist throughout your grow space. With three mist outlets, Monster Fogger ensures complete and effective coverage, helping every crop thrive.

VDL Monster Fogger Mist Humidifier will provide optimal conditions for your plants. With its high-quality components and reliable operation, this humidifier is the perfect choice for successful, healthy growth.

Guaranteed quality and reliability

Made with high-quality components, Monster Fogger is durable and reliable. Keep your plants in the best conditions with this powerful humidifier and achieve excellent results in your grow.

RAM Inline DI Water Filter for Wall Humidifier

Inline filter with deionizing resin for the water supply to the RAM Wall Humidifier. Designed to reduce dissolved minerals in the water.

Replacement

Monitor the resin’s color indicator and replace it according to the filter instructions.

Replacement and Compatibility

Before replacing, check the system model, housing size, and connection ports. Shut off the water supply and release pressure according to the system instructions.

Browse replacement water filters.

Cyclone Desert 60 L/day dehumidifier

Desert Cylcone dehumidifiers are designed for fast, long-lasting humidity control in large and industrial spaces. In addition to protecting against moisture and mold, these dehumidifiers offer outstanding performance, energy efficiency and reliable operation. 

• suitable for: greenhouses, warehouses and production workshops
• humidity reduction after construction and renovation work
• recovery after floods and accidents

Instructions for use in English: here*

Technical specifications:

• dehumidification capacity: 60 L/day at operating conditions 30°C - 80% RH
• power consumption: 850 W
• amperage: 4.8 A
• hygrostat: digital
• environmentally friendly refrigerant R134a
• airflow: 800 m³/h
• direct drainage: 1-meter hose
• power cable length: 1.8 m
• dimensions: 40.9 x 35.2 x 64 cm
• weight: 41 kg

TWE Alpha Q13, 13 L/24 h dehumidifier

TWE Alpha Q13 is an innovative, energy-efficient next-generation dehumidifier designed to quickly and effectively reduce humidity in enclosed spaces. It helps reduce and eliminate moisture condensation on windows, walls, floors and ceilings. It protects clothes, leather goods, books and other sensitive materials from mold and mildew. It can be set to maintain a specific humidity level in the room. The adjustment range is from 30% to 80%, and it can also operate in continuous mode. An additional three-layer activated carbon filter can be added. Suitable for use in homes, offices, storage rooms, doctors' offices, pharmacies, hair salons and beauty salons, libraries, sports facilities and gyms, garages, attics, basements, pantries, storage facilities, schools and childcare facilities, hotel rooms, banks and more.

1. Fast results.
2. Protection against mold and mildew.
3. Low energy consumption.

• power: 145W
• up to 13L / 24h dehumidification
• Sleep mode - 35dB
• high-contrast LED display
• touch buttons
• two-speed - quiet and normal speed
• setting from 30 to 80% RH in 5% increments and continuous operation mode
• permanent filter
• option to add a three-layer activated carbon filter
• dimensions H x W x D: 44.5 x 31.0 x 21.0cm
• weight: 10.2kg
• warranty: 2 years

Instructions for use: here*

Advantages:

1. Energy-efficient. With a power consumption of 145W, it is the most energy-efficient dehumidifier for its capacity. It saves money while achieving the desired result in a short time.
2. Quiet operation. Enjoy maximum comfort with Sleep mode at just 35dB. This helps ensure a peaceful stay in any room where the appliance is operating.
3. Protection and safety. Certified construction with IPX4 splash protection and a child safety lock.
4. Additional filter. If desired, a three-layer activated carbon filter can be added to neutralize smoke and unpleasant odors and trap dust, mold spores, and other pollutants. (Sold separately).
5. High efficiency. Made using the latest technology, it quickly and visibly removes excess moisture and condensation. Ideal for homes with rooms of up to 60m².
6. Illuminated display. Displays the current humidity level and operating mode. Conveniently located on top of the unit for easy viewing. Touch-button controls require no pressure or effort.

Technical specifications:

• area covered: up to 60m²
• daily dehumidification: up to 13l
• airflow: 95m³/h
• noise level: 35dB
• fan speeds: 2 speeds, quiet and normal
• water protection: IPX4
• tank capacity: 2.3l
• power consumption: 145W
• display: yes
• air filter: permanent mesh filter, with the option to add an additional filter
• timer: 24h in 1h increments
• drain hole: yes
• auto-restart after a power outage: yes
• self-defrosting: yes, automatic
• dimensions H x W x D: 44.5 x 31.0 x 21.0cm
• weight: 10.2kg
• refrigerant: R290
• warranty: 2 years

Mist Maker 12, 5300 ml/h humidifier with float

The Mist Maker 12 air humidifier - 5300ml/h provides the humidity your plants need without emitting heat.

• Creates a mist of fine water droplets using ultrasonic vibrations
• Does not raise the room temperature
• Uses 5300 ml of water per hour
• Power: 300W
• Can run for 2000 hours (the ceramic discs can be replaced)
• The set includes: a humidifier with 12 ceramic discs, an adapter with a 10m power cable, a float and 12 spare ceramic discs

The high-quality Mist Maker 12 humidifier is very compact and can be easily installed in rooms of various sizes.

Can be used:

• For growing plants outdoors and indoors
• In aquariums
• Fountains

Its design allows the ceramic discs to be easily cleaned of limescale buildup or other contaminants from the water.

Can be combined with a float, which allows it to be installed in various water tanks.

Equipped with a water level sensor, which switches off the humidifier when the water level gets too low.

HE402 Ø200 mm, duct humidifier The Bevoghtiger HE 402 Flens Rond 200mm Cap 10LTR is an excellent choice for anyone looking for a high-performance yet compact and convenient ventilation and climate control system. With a flange diameter of 200 mm, this unit can be easily integrated into any airflow system, giving you the flexibility to use it in the way that best suits your needs. This unit has a capacity of 10 liters, which means it can handle large volumes of air efficiently and reliably. Thanks to its high performance, it can improve air quality in large spaces or maintain stable temperature and humidity levels in your home, office, or production facility.

Faran Analogue Hygrostat is a reliable analogue controller for automatic humidity management in grow rooms, greenhouses, nurseries and other climate-controlled spaces. The device monitors relative air humidity and automatically switches a humidifier on or off to maintain the set level, without complex settings or an internet connection.

Faran Analogue Hygrostat is a practical solution for automatically maintaining optimum humidity in plant-growing spaces. Instead of constantly monitoring and switching on the humidifier manually, the device controls relative humidity and manages the connected humidifier according to the preset value.

Thanks to the analogue control, setup is quick and intuitive. No apps, Wi-Fi connection or digital programming are needed – simply set the desired humidity level with the rotary potentiometer and the hygrostat automatically takes care of the rest.

The device is designed to work with humidifiers such as Faran HR15, Faran HR50 and other standard humidifiers controlled by switching the power supply on and off. When the set humidity is reached, the hygrostat cuts power to the humidifier; when it drops below the set value, it switches it on again.

For best results, the manufacturer recommends installation at plant canopy height and away from the humidifier's direct airflow, to avoid inaccurate readings.

Technical specifications

✔️ Manufacturer: Faran

✔️ Type: Analogue hygrostat

✔️ Function: Automatic humidity control

✔️ Operating range: 10% – 80% RH

✔️ Control method: ON/OFF

✔️ Accuracy: ±5% RH

✔️ Hysteresis: approximately 3% RH

✔️ Sensor: Nylon Loop

✔️ Power supply: 220 V AC / 50 Hz

✔️ Maximum switching current: 2.2 A

✔️ Power-cable length: 2 m

✔️ Dimensions: 140 × 95 × 45 mm

✔️ Operating temperature: 10°C – 40°C.

📦 The kit includes

✔️ 1 × Faran Analogue Hygrostat

✔️ Power cable

✔️ User manual.

📋 Instructions for use

1. Mount the hygrostat on a wall at plant level.
2. Avoid mounting directly next to the humidifier or in the direct path of the water mist.
3. Connect the humidifier to the hygrostat.
4. Set the desired relative humidity using the rotary control.
5. Leave the system running for several hours and check the humidity with a thermo-hygrometer.
6. If necessary, fine-tune the setting until the desired level is reached.

⚠️ Important: For the most accurate readings, place the hygrostat away from the humidifier’s direct airflow, heaters and ventilation openings. This gives a true humidity reading in the plant zone and more precise climate control.

VEAB CWK 315-3-2.5 is a professional duct water cooler for Ø315 mm air ducts, designed to cool air in ventilation and air-conditioning systems using cold water. The heat exchanger has copper tubes and aluminium fins, while the built-in stainless-steel tray collects the resulting condensate. This model is suitable for both central ventilation systems and cooling individual rooms or greenhouses.

CWK 315-3-2.5 is installed directly in a round air duct and uses chilled water as the energy carrier. This allows the air passing through the ventilation system to be cooled without the need for a direct evaporative refrigerant heat exchanger.

The construction is designed for easy maintenance – the casing has an opening cover for inspection and cleaning, while condensate is drained via a stainless-steel tray and G½" drain connection.

Technical specifications

• Manufacturer: VEAB
• Model: CWK 315-3-2.5
• Type: Duct water cooler
• Purpose: Ventilation-air cooling
• Heat-transfer medium: Cold / chilled water
• Air-duct diameter: Ø315 mm
• Number of heat exchanger rows: 3
• Fin spacing: 2.5 mm
• Pipe connections: Ø22 mm
• Condensate drain: G½"
• Internal heat exchanger volume: 1.61 l
• Maximum working pressure: 1.0 MPa / 10 bar
• Installation: In a horizontal air duct
• Heat exchanger: Copper pipes with aluminium fins
• Condensate tray: Stainless steel
• Air-duct connections: With rubber seals.

📐 Dimensions

According to the current VEAB technical documentation for CWK 315-3-2.5:

💨 Cooling capacity

Cooling capacity is not a fixed value. It depends on airflow and air temperature, humidity, as well as the temperature and flow rate of the chilled water.

For example, with water at 6/12°C, the VEAB table gives the following indicative results for CWK 315-3-2.5:

These values are example design points, not a constant product output. For a specific system, VEAB recommends calculation according to the actual air and water parameters.

💧 Control and automation

The CWK itself is a water-to-air heat exchanger. For automatic temperature control, the system can be supplemented with:

temperature controller → sensor → control valve → actuator → frost protection.

For example, VEAB specifies for the CWK 315-3-2.5 a two-way valve ZTV15-1.6 (Kvs 1.6) as a suitable option in its selection table.

This is important for the product page – control components must not be presented as included as standard, unless the specific offer explicitly states this.

💦 Condensate drainage

When warm, humid air is cooled, the heat exchanger temperature may fall below the dew point and condensation may form.

For this reason, the CWK is equipped with a stainless-steel tray that collects the water and allows it to drain through a G½" drain connection.

🛠️ Construction and maintenance

The heat exchanger uses copper tubes and aluminium fins, while the casing is made of protected sheet metal. The opening cover provides access to the interior for periodic cleaning and inspection.

Rubber seals on the round connections make integration into the ventilation system easier.

You can view the manual

🏭 Suitable for

VEAB CWK 315-3-2.5 is suitable for:

• ventilation and air-conditioning systems;
• cooling of supply fresh air;
• air-conditioning of individual rooms and zones;
• greenhouses and controlled environments;
• production and technical premises;
• systems with a chiller or another source of cold water.

The manufacturer explicitly states use both for cooling ventilation air and for individual cooling of specific rooms or zones.

📦 Product information

Model: CWK 315-3-2.5
Manufacturer: VEAB Heat Tech AB
Diameter: Ø315 mm
Warranty: 24 months

⭐ Key benefits

✔️ Professional water cooler for Ø315 mm air ducts
✔️ Operates with cold water
✔️ 3-row heat exchanger
✔️ Copper tubes and aluminium fins
✔️ Integrated stainless-steel condensate tray
✔️ Drain connection G½"
✔️ Maximum working pressure 10 bar
✔️ Openable housing for easy cleaning
✔️ Option for automatic temperature control
✔️ Manufactured by VEAB.

TWE-S10A, dehumidifier, 10 L/24 h

Dehumidifier TWE-S10A is designed for rapid and effective humidity reduction in enclosed spaces. It helps reduce and eliminate moisture condensation on floors, walls, ceilings, and windows. It protects clothing, leather goods, and other delicate fabrics from mold and mildew. Suitable for use in homes, offices, storage rooms, doctors’ offices, pharmacies, hair salons and beauty salons, libraries, sports facilities and gyms, garages, attics, basements, pantries, storage facilities, and more.

1. Fast results.
2. Protection against mold and mildew.
3. Low energy consumption.

• power: 155W
• up to 10L / 24h dehumidification
• setting from 30 to 80% RH in 5% increments and continuous operation mode
• display
• two-speed - quiet and normal speed
• laundry drying program
• permanent filter
• dimensions H x W x D: 46.5 x 30.0 x 25.0 cm
• weight: 11.3 kg
• warranty: 2 years

Instructions for use: here*

Advantages:

1. Laundry drying program. A dedicated button starts the special laundry drying program.
2. Energy-efficient. With a power consumption of 155W, it is the most energy-efficient dehumidifier in its capacity class. It saves money by achieving the desired result in a short time.
3. Protection and safety. It features protection when the tank is full, automatic defrosting at low temperatures, and a child safety lock.
4. Humidity control. It can be set to maintain a specific humidity level in the room. The adjustable range is from 30% to 80%. It can also operate in continuous operation mode.
5. High efficiency. Manufactured using the latest technology, it quickly and visibly removes excess moisture and condensation. Ideal for homes with rooms measuring up to 40m².
6. Quiet operation. It has 2 operating speeds, with maximum comfort achieved at the quiet speed, just 36dB. This helps create a peaceful environment in any room where the appliance is operating.

Technical specifications:

• coverage area: up to 40m²
• daily dehumidification: up to 10L
• airflow: 105m³/h
• noise level: 36dB
• fan speeds: 2 speeds, quiet and normal
• tank capacity: 2.6L
• power consumption: 155W
• display: yes
• air filter: permanent mesh
• timer: 24 h in 1 h increments
• drain hole: yes
• auto-restart after a power outage: yes
• automatic defrost: yes, automatic
• dimensions H x W x D: 46.5 x 30.0 x 25.0 cm
• weight: 11.3 kg
• refrigerant: R290
• warranty: 2 years

Cezio humidifier, 3-5 L/h

Industrial humidifier, suitable for continuous use for years. Creates a fine mist and circulates it around the space. Easy to install and maintain. Suitable for greenhouses, nurseries, mushroom farms, farms, warehouses, etc.

​

• Voltage: 220V 50Hz
• Power: 90W
• Capacity: 3-5 L/h
• Dimensions: 389x389x455mm
• Weight: 7.7kg
• Certifications: ISO, CE

Cyclone Desert 90 L/day dehumidifier

Desert Cyclone dehumidifiers are designed for fast and lasting humidity control in large and industrial spaces. In addition to protecting against moisture and mold, these dehumidifiers provide exceptional performance, energy efficiency and reliable operation. 

• suitable for: greenhouses, warehouses and production facilities
• humidity reduction after construction and renovation work
• restoration after floods and emergencies

Instructions for use in English: here*

Technical specifications:

• dehumidification capacity: 90 L/day at operating conditions of 30°C - 80% RH
• power consumption: 1075 W
• amperage: 4.8 A
• hygrostat: digital
• environmentally friendly refrigerant R134a
• airflow: 1000 m³/h
• direct drainage: 1-meter hose
• power cord length: 1.8 m
• dimensions: 51.0 x 45.0 x 84.0 cm
• weight: 48 kg

Compact ultrasonic humidifier Mist Maker 9, which creates a fine mist without heat or chemicals — ideal for humidity control in rooms, greenhouses, aquariums and air-conditioning systems.

Detailed features

• Housing diameter 12 cm, height 3,3 cm.
• Power: 250 W.
• Cable length: 7,5 m.
• Steam/mist output: 675 ml/hour.
• Water consumption: 2700 ml/hour.
• Operating temperature range: from 5 °C to 40 °C.
• Number of generator sockets: 9.
• Designed for use in small spaces requiring high humidity; the housing has a special coating for easy cleaning.
• Weight: 5,400 kg.
• Warranty: 1 year.

Recommendations for use

• Install the transformer on a stable, level surface, away from direct contact with water and humid environments wherever possible.
• Ensure that the device is connected to a suitable power source and that the cable is securely fitted.
• Use in an area where relative humidity control is required – for example, in greenhouses, aquariums, grow rooms and more.
• Periodically check and drain the reservoir to prevent sediment buildup.
• Do not allow solid particles or fragments to enter the generator sockets – this may impair efficiency.
• After use or before storage, switch off the unit, clean it and store it in a dry place to extend its service life.

Benefits

Mist Maker 9 is a powerful ultrasonic humidifier that delivers a substantial volume of mist through 9 generators, with 250 W power and water consumption of up to 2700 ml/hour. With compact dimensions and a wide temperature range (5–40 °C), it is suitable for professional systems and home humidity-control solutions alike.

HE402 is a professional air humidifier for installation in ventilation systems, designed to maintain optimal humidity in plant-growing rooms, greenhouses and other climate-controlled spaces. With the correct water pressure, it provides a capacity of up to 10 litres per hour and is suitable for systems with an airflow of 600–700 m³. It operates without fine mist in the room, humidifying the air efficiently through evaporation.

HE402 is designed for professional applications where precise humidity control is required. It is installed in an air duct with a diameter of Ø200 mm and operates together with a suitable inline fan. For maximum performance, the manufacturer recommends inlet water pressure of at least 2 bar and an incoming air temperature of around 28–30°C. Under these conditions, the system achieves optimal humidification capacity.

The humidifier uses a special evaporative element through which the airflow passes. This allows even humidification without forming free water mist in the room, which is particularly suitable for environments with lighting, electronics and sensitive equipment.

If higher capacity is required, the system can be combined with a booster pump, which raises water pressure to 8 bar. This atomises the water into significantly finer droplets, improving evaporation and increasing humidification efficiency.

For automatic operation, the manufacturer recommends using a humidistat, which simultaneously controls the solenoid water valve, the fan and any booster pump. This way, the humidifier operates only when needed and a stable relative-humidity level is maintained.

Installing an air-distribution sleeve after the humidifier helps distribute humid air more evenly in the room, while using a filter before the fan limits dust accumulation on the evaporative element. An additional benefit of the system is that it also has a slight cooling effect on the air during operation.

Technical specifications

✔️ Type: Duct air humidifier

✔️ Model: HE402

✔️ Installation diameter: Ø200 mm

✔️ Humidification capacity: up to 10 L/hour

✔️ Recommended airflow: 600–700 m³

✔️ Minimum water pressure: 2 bar

✔️ Optimal incoming air temperature: 28–30°C

✔️ Can be used with a booster pump (up to 8 bar)

✔️ Compatible with Ruck RKS 200L inline fan

✔️ Suitable for automatic control via a humidistat.

📦 The kit includes

✔️ 1 × Air humidifier HE402

Note: The fan, humidistat, booster pump and air-distribution sleeve are sold separately unless included in a specific configuration.

Benefits

✔️ Capacity of up to 10 litres of humidification per hour

✔️ Suitable for rooms with a volume of 600–700 m³

✔️ Operates without direct water-mist spraying

✔️ Can be automatically controlled via a humidistat

✔️ Output can be increased with a booster pump

✔️ Helps cool the air during operation

✔️ Easy integration with existing ventilation systems

✔️ Suitable for continuous professional use.

Application

Suitable for:

• Greenhouses

• Seedling production areas

• Ventilation systems

• Climate-controlled rooms

• Storage areas

• Production areas

• Other spaces where optimal air humidity must be maintained.

📋 Instructions for use

1. Install the humidifier in Ø200 mm ducting.
2. Connect the unit to a water supply with a minimum pressure of 2 bar.
3. If necessary, install a booster pump for higher output.
4. Connect the fan and solenoid valve to a humidistat for automatic control.
5. Where possible, use an air-distribution sleeve for more even humidity distribution.
6. Periodically clean the evaporative element and keep the system free of dust build-up for optimal performance.

⚠️ Important: For correct operation, the manufacturer recommends that all electrical components (fan, solenoid valve and booster pump, if fitted) are switched on and off simultaneously via a humidistat. If the fan remains on after the water supply is stopped, humidification will continue for a while due to residual moisture in the evaporative element

Cornwall, dehumidifier 12 L/day

Cornwall 12 L/day dehumidifier removes excess moisture from the air, creating a comfortable environment for your home and office. Its compact design makes it easy to move.

• Capacity (approximate): 12 L/24 h
• Coverage area: 15 to 20 m²
• Airflow: 448 m³/h
• Power consumption: 220 W
• Dimensions: 29 x 17 x 51 cm

FARAN HR-15, humidifier 1500 ml/h

FARAN HR-15 is a reliable industrial humidifier for medium-sized rooms with an area of 15-30m². It creates a fine mist and ventilates it around the room. 

• for nurseries, greenhouses, mushroom farms, animal breeding facilities, warehouses, etc.
• Easy to install (connects directly to a tap or water tank).
• Can be wall-mounted.
• Convenient handle for easy carrying.
• Made from high-quality, durable materials.

• humidification range: rooms with an area of up to 15-30m²
• consumption: 90W
• humidification capacity: 1500 ml / h

Features:

• Suitable for: nurseries, greenhouses, mushroom farms, animal breeding facilities, warehouses, etc.
• Easy to install (connects directly to a tap or water tank).
• Can be wall-mounted.
• Convenient handle for easy carrying.
• Durable, made from high-quality materials.
• Suitable for chemical disinfection and deodorization.

Technical specifications:

• humidification range: rooms with an area of up to 15-30m²
• power supply: 110/220V, 50/60Hz
• consumption: 90W
• humidification capacity: 1500 ml / h
• dimensions: 310 x 310 x 470mm

Note:

1. Place it horizontally to monitor the water level!
2. Make sure the connecting cable is long enough!
3. Periodically check and clean the water tank!
4. If there is no humidification, disconnect the power supply and check the water level!
5. If the water overflows, close the water tap and check the float valve!

The VDL 250 ml/day Mini Dehumidifier is a compact and effective solution for controlling humidity in small spaces. Designed for rooms such as bedrooms, bathrooms, offices, or grow tents, it maintains optimal humidity and prevents mold and mildew.

The device uses modern Peltier thermoelectric technology, which operates without a compressor or chemicals, providing quiet operation and low power consumption. This makes it ideal for continuous use, including overnight or in a work environment.

With a capacity of up to 250 ml per day and a tank holding approximately 900 ml, the dehumidifier offers convenience and requires minimal maintenance. Thanks to its automatic shutoff when the tank is full and LED indicator, it is completely safe and easy to use.

Key features

✔️ Dehumidification capacity: up to 250 ml/24 h
✔️ Tank capacity: ~900 ml
✔️ Technology: Peltier (no compressor or chemicals)
✔️ Power consumption: approximately 23 W
✔️ Dimensions: approximately 16.5 × 11.5 × 24 cm
✔️ Automatic shutoff when the tank is full
✔️ LED status indicator
✔️ Very quiet operation
✔️ Suitable for small rooms and enclosed spaces

⭐ Benefits

✔️ Effectively removes excess moisture and prevents mold
✔️ Extremely quiet – ideal for bedrooms and offices
✔️ Low power consumption → economical for long-term use
✔️ Compact and easy to carry
✔️ Safe – automatic shutoff when the tank is full
✔️ Chemical-free → an eco-friendly solution

? Application

The VDL Mini Dehumidifier is ideal for small spaces, such as closets, bathrooms, bedrooms, offices, or storage rooms.

Especially suitable for humidity control when growing plants or drying, where a stable environment is essential. It can also be used at home to improve air quality and comfort year-round.

TWE-85L, dehumidifier 85 L/24 h

TWE-85L Dehumidifier is a professional unit designed for quick, lasting humidity reduction, for example after construction and renovation work, and for recovery after floods and accidents. Suitable for larger spaces where humidity must be kept below a certain level.

• power: 815W
• up to 85 L / 24 h dehumidification
• setting from 26 to 90% RH in 1% increments and continuous operation mode
• operating hours counter (current and total)
• permanent mechanical filter for trapping dust and other pollutants
• outgoing air can be vented through a duct
• built-in 5 m drain hose
• dimensions H x W x D: 83.0 x 51.5 x 53.0 cm
• weight: 45.5 kg
• warranty: 2 years

User manual: here*

Technical specifications:

• dehumidification per day: up to 85 L
• airflow: 700 m³/h
• noise level: up to 58 dB
• fan speeds: 1
• tank capacity: with pump
• power consumption: 815W
• display: yes
• air filter: foam, washable
• additional air filter: no
• timer: operating hours counter
• drain outlet: built-in 5 m flexible drain hose
• auto restart after power outage: yes
• auto defrost: yes, automatic
• dimensions H x W x D: 83.0 x 51.5 x 53.0 cm
• weight: 45.5 kg
• refrigerant: R290
• warranty: 2 years

TWE Alpha Q13 Pro Wi-Fi, dehumidifier 13 L/day

TWE Alpha Q13 Pro Wi-Fi is the brand's newest and most advanced dehumidifier model. It won the award «PLUS X» in 2021 in the «High Quality», «Design» and «Functionality» categories. Thanks to its built-in Wi-Fi module, it can be controlled from a mobile device over the Internet. It has an additional three-layer activated carbon filter (included), which absorbs unpleasant odors and captures fine dust particles. The permanent air filter is bactericidal, and together with the additional filter and ionizer, they provide effective air purification. An innovative and energy-efficient next-generation dehumidifier, designed to quickly and effectively reduce humidity in enclosed spaces. It helps reduce and eliminate moisture condensation on windows, walls, floors and ceilings. It protects clothes, leather goods, books and other sensitive materials from mold and mildew. Suitable for use in homes, offices, storage rooms, doctors' offices, pharmacies, hair salons and beauty salons, libraries, sports facilities and gyms, garages, attics, basements, pantries, storage facilities, schools and childcare facilities, hotel rooms, banks, etc.

1. Fast results.
2. Protection against mold and mildew.
3. Low energy consumption.

• power: 145W
• up to 13 L / 24 h dehumidification
• Wi-Fi control
• filter system
• ionizer
• laundry drying program
• dimensions H x W x D: 44.5 x 31.0 x 21.0cm
• weight: 10.3kg
• warranty: 2 years

Instructions for use: here* and here*

Advantages:

1. Wi-Fi control. Control the unit easily and conveniently from a distance using your smartphone - access is possible over your home Wi-Fi network from anywhere with an Internet connection. You can monitor humidity remotely and adjust all functions at any time.
2. Filter system. Feel the difference! The permanent bactericidal filter + additional three-layer activated carbon filter protect against dust, viruses and bacteria, mold spores, and unpleasant odors.
3. Ionizer. Negative ions are beneficial to health and improve air cleanliness and quality—breathe easy, just like in nature!
4. Laundry drying program. Hang your laundry to dry wherever it’s convenient at home—humidity doesn’t stand a chance. Great convenience at the touch of a button.
5. Energy-saving. With a power consumption of 145W , it is the most economical dehumidifier in its capacity class. Save money as its efficient operation achieves the desired results in a short time.
6. Remarkably quiet. Enjoy maximum comfort with the quiet operating mode at just 35dB. This creates a peaceful atmosphere in any room where the unit is running.

Technical specifications:

• coverage area: up to 60m²
• dehumidification per day: up to 13L
• airflow: 95m³/h
• noise level: 35dB 
• ionizer
• laundry drying program
• fan speeds: 2 speeds, quiet and normal
• water protection: IPX4
• tank capacity: 2.3L
• power consumption: 145W
• display: yes
• air filter: permanent antibacterial mesh filter and additional three-layer activated carbon filter
• timer: 24h in 1h increments
• drain outlet: yes
• auto-restart after a power outage: yes
• defrosting: yes, automatic
• dimensions H x W x D: 44.5 x 31.0 x 21.0cm
• weight: 10.3kg
• refrigerant: R290
• warranty: 2 years

TWE-55L, dehumidifier 55 l/24 h

The TWE-55L dehumidifier is a professional appliance designed for rapid and long-lasting humidity reduction, for example after construction and renovation work, and for recovery after floods and accidents. It is suitable for larger spaces where humidity needs to be maintained below a certain level.

• power: 750W
• up to 55l / 24h dehumidification
• setting from 26 to 90% RH in 1% increments and continuous operation mode
• running time counter (current and total)
• permanent mechanical filter to trap dust and other contaminants
• option to exhaust the outgoing air through a duct
• integrated 5m drain hose
• dimensions H x W x D: 64.0 x 54.5 x 50.0cm
• weight: 38.0kg
• warranty: 2 years

Technical specifications:

• daily dehumidification: up to 55l
• airflow: 345m³/h
• noise level: up to 58dB
• fan speeds: 1
• tank volume: with pumping
• power consumption: 750W
• display: yes
• air filter: yes
• additional air filter: no
• timer: running time counter
• drain outlet: integrated flexible drain hose 5m
• auto restart after a power outage: yes
• self-defrost: yes, automatic
• dimensions H x W x D: 64.0 x 54.5 x 50.0cm
• weight: 38.0kg
• refrigerant: R290
• warranty: 2 years