Other thermostats, hygrostats, and regulators

Cornwall Electronics is a speed controller that reduces the speed of a compatible fan using a rotary knob.

Features and functions

• Power supply: 230 V, 50 Hz.
• Maximum power rating: 280 W.
• Maximum current rating: 1.6 A.

Check that the motor is compatible with this control method and observe both the current and power limits. Do not set a speed at which the motor cannot run steadily.

Choosing a climate controller

Match the load type to the control method. An AC fan with adjustable voltage and an EC fan with a signal input require different controls. Follow the limitations of the specific model.

View ventilation and climate controllers.

The CORNWALL humidity controller is the ideal device for maintaining optimal humidity for your crop. Connect it to your humidifier or dehumidifier and set the desired humidity. The controller will take care of the rest.

• Voltage: 230V AC/50HZ
• Maximum load: 16A 3680W
• Inductive load: 2A 460W 
• Operating temperature: 5°C - 40°C
• Storage temperature: -10°C - 50°C
• Controlled humidity range: 20% - 90%
• Accuracy: ±5%
• Reporting period: 10 sec

Before use, please read the instructions:

• Before setting the humidity, select the operating mode - dehumidification (fan icon) or humidification (droplets icon). In "dehumidification" mode, the controller supplies power when humidity exceeds the set value; in "humidification" mode, when humidity falls below the set value.
• To change the operating mode - press ON/OFF and the "up arrow" together for 3 seconds.
• Default setting: Humidity (SET): 40%; Mode: Humidification
• Setting the humidity - press ON/OFF

Humidification mode (icon: droplets):

• use the arrows to set the SET value at least 5% above the RH humidity (the currently measured humidity). After a few minutes, the indicator will light green and the controller will start supplying power;
• when the room humidity (RH) reaches the level set in SET, the indicator lights red, the droplets disappear from the screen, and the controller stops supplying power.
• when the room humidity (RH) is above the level set in SET, the indicator lights red and the controller will not supply power.

Dehumidification mode (icon: fan):

• use the arrows to set the SET value at least 5% below the RH humidity (the currently measured humidity). After a few minutes, the indicator will light green and the controller will start supplying power;
• when the room humidity (RH) drops to the level set in SET, the indicator lights red, the fan disappears from the screen, and the controller stops supplying power.
• when the room humidity (RH) is below the level set in SET, the indicator lights red and the controller will not supply power.

Important:

• Do not connect a power strip downstream of the controller!
• Do not connect devices that transmit vibrations to the controller!
• Ensure the safety of heating and moving devices!
• Protect from moisture, extreme temperatures, shocks, and vibrations!
• Use indoors only; do not expose to sunlight!
• Keep out of reach of children!

Charge the battery when the device displays "LO" - by plugging the device into an outlet!

Distinguish the maximum load of 16 A / 3680 W from the specified inductive load of 2 A / 460 W. For a motor, compressor, or other inductive device, observe the lower allowable limit.

Choosing a climate controller

Match the load type and control method. An AC fan with adjustable voltage and an EC fan with a signal input require different controls. Follow the limits for the specific model.

Browse ventilation and climate controllers.

Cornwall temperature controller, ideal for stabilizing the temperature of your crop. It can be used with an air conditioner or other heating appliances (heaters), depending on the selected function.

• Voltage: 230V AC/50HZ
• Maximum load: 16A 3680W
• Inductive load (exhaust fan): 2A 460W 
• Operating temperature: 0°C - 40°C
• Storage temperature: -10°C - 50°C
• Controlled temperature: 5°C - 30°C / 40°F - 85°F
• Accuracy: ±1°C / ±3°F
• Reading interval: 10 sec

Please read the instructions before use:

• Before setting the temperature, select the operating mode - cooling (snowflake icon) or heating (flame icon). In "cooling" mode, the unit supplies power when the temperature exceeds the set value; in "heating" mode, it supplies power when the temperature drops below the set value. To change the operating mode - press ON/OFF and "up arrow" together for 3 seconds.
• To switch between °C and °F - press the "up arrow" and "down arrow" together for 3 seconds
• Default setting - cooling; 20°C
• Setting the temperature - press ON/OFF

Cooling mode:

• Use the arrows to set the "SET" temperature at least 2° below the "RM" temperature (the current measured temperature). After a few minutes, the indicator will glow green and the controller will start supplying power.
• When the "RM" temperature reaches the "SET" temperature, the indicator will glow red and the snowflake icon will disappear from the screen; the controller will stop supplying power.
• When the "SET" temperature is above the "RM" temperature, the indicator will glow red and the controller will not supply power.

Heating mode:

• Use the arrows to set the "SET" temperature at least 2° above the "RM" temperature (the current measured temperature). After a few minutes, the indicator will glow green and the controller will start supplying power.
• When the "RM" temperature reaches the "SET" temperature, the indicator will glow red and the flame icon will disappear from the screen; the controller will stop supplying power.
• When the "SET" temperature is below the "RM" temperature, the indicator will glow red and the controller will not supply power.

Important:

• Do not connect a power strip after the controller!
• Do not connect devices that transmit vibrations to the controller!
• Ensure the safety of heating and moving appliances!
• Protect from moisture, extreme temperatures, impacts, and vibrations!
• Use indoors only; do not expose to sunlight!
• Keep out of reach of children!

Charge the battery when the device displays "LO" - by plugging the device into the socket!

Distinguish between the maximum load of 16 A / 3680 W and the specified inductive load of 2 A / 460 W. For a motor, compressor, or other inductive appliance, observe the lower permissible limit.

Choosing a climate controller

Match the load type to the control method. An AC fan with adjustable voltage and an EC fan with a signal input require different controls. Follow the limitations for the specific model.

Browse ventilation and climate controllers.

The Lighthouse wireless thermostat is ideal for most heating appliances. These include infrared heaters, tube heaters, "fan heaters", underfloor heating and portable radiators, as well as various types of cooling appliances.

• Plug and Play (simply connect it to the mains and switch it on; no installation required)
• automatic wireless connection between the portable thermostat and the switch
• option to select the "heating" or "cooling" function, depending on the appliance you want to use
• built-in temperature sensor
• multi-channel - one portable thermostat can control several switches
• portable design, suitable for placement or wall mounting
• displays the current and desired temperature in ºC or ºF
• LCD backlight with battery-saving automatic shutoff
• low battery warning

Technical specifications:

• max. specifications for the connected appliance: 230V, 50Hz, 13A, 3000W
• power supply for the portable thermostat: 2 x 1.5AA batteries (not included)
• current temperature measurement: 0ºC - 70ºC or 32ºF - 158ºF

Choosing a climate controller

Consider the load type and control method. An AC fan with adjustable voltage and an EC fan with a signal input require different controls. Follow the limitations of the specific model.

Explore ventilation and climate controllers.