Irrigation Timers and Control

The PLANTiT Water Timer is designed to connect to a tap, but can also be used for gravity-fed irrigation from a barrel or tank. The timer is programmed in just 2 easy steps - turn the Run Time dial to set your desired watering duration, and the Frequency dial to set the desired interval between waterings. Then connect it to the irrigation outlet pipe and the timer will take care of the rest.

• Designed to connect to a tap
• The protective cover makes it fully waterproof
• Powered by two 1.5V AAA batteries (not included), which can last a whole season without needing replacement
• Automatic shut-off valve for when the battery runs out, and a program delay button for when you need to maintain your plants and don't want to water them
• Supplied with a set of fittings and a built-in filter

Technical specifications:

• Operating pressure range: 0-150 PSI (0-10 BAR)
• Connection: ¾ male / female connector / hose connector
• Frequency: choose to irrigate every 1, 2, 3, 4, 6, 8, 12, 24, 48 or 72 hours, or once a week
• Run time (watering): 1, 3, 5, 10, 15, 20, 30, 60, 90 or 120 minutes

Before setting the watering schedule

Take the inlet pressure, water source and watering duration into account. Check the flow rate with a test cycle.

Browse irrigation timers and ready-made irrigation systems.

Make watering your garden easy as child's play with the Water Master irrigation timer! Setting the timer takes just 2 easy steps - turn the Run Time dial to set your desired watering duration, and the Frequency dial to set the desired interval between waterings. Then connect it to your garden hose using a standard quick connector, and the timer will take care of the rest!

• uses an efficient solenoid valve
• up to 8 waterings per day
• programs the frequency and watering duration
• quick and easy to install on any tap

Technical specifications:

• Frequency (Frequency / Frequency): you can set watering every 1, 2, 3, 4, 6, 8, 12, 24, 48, 72 hours or 1 week
• Run time / watering (Active time / Runtime): 1, 3, 5, 10, 15, 20, 30, 60, 90, or 120 minutes
• Connections: ¾ male and ¾ female connector
• Batteries: 2 x AAA (not included)

Before setting the watering schedule

Take the inlet pressure, water source, and watering duration into account. Check the amount delivered with a test cycle.

Browse irrigation timers and ready-made irrigation systems.

Water Master is a high-quality digital irrigation timer, designed specifically to control drip irrigation and sprinkler irrigation systems. 

• uses an efficient solenoid valve
• up to 8 watering cycles per day
• programming of frequency and watering duration
• easy and quick to install on any tap

Specifications:

• Connections: ¾ male and ¾ female connector
• Batteries: 2 x AAA (not included)

Before setting up the watering schedule

Take into account the inlet pressure, water source, and watering duration. Check the amount of water delivered with a test cycle.

Explore timers and ready-made irrigation systems.

A reliable, easy-to-set water timer for one watering zone — automates watering in a garden, greenhouse, or balcony, so plants receive water regularly without manual intervention.

• Type: 1-zone digital water timer.
• Operating pressure: 0.5 – 8 bar (≈ 7 – 116 PSI).
• Maximum flow rate: up to 35 L/min.
• Watering duration: from 1 to 240 minutes (up to 4 hours).
• Watering frequency: from every 1–12 hours or at intervals of 1–7 days — selected according to the plants’ needs.
• Power supply: 2 × AA (1.5 V) batteries.
• Operating temperature range: 3 °C – 50 °C.
• Valve / Connections: standard faucet/hose threads.
• Low-battery indicator and frost protection — at temperatures below ~3 °C, remove the device to avoid damage.
• Operating modes: automatic (on a schedule), manual watering (without changing the main schedule), and “Rain-Delay” (delaying watering due to rain/humidity).

Recommendations for use

• Install the timer on a standard garden faucet or hose, before the pipe/hose leading to the plants.
• Set a schedule: choose a convenient start time, duration, and frequency — this allows regular watering without manual intervention.
• When you’re away or your schedule is unpredictable, the timer ensures your plants get water even when you’re not there.
• For winter: remove the device if freezing temperatures are expected — the water inside may freeze and damage the housing.
• Maintain normal pressure (0.5–8 bar) and good flow rate — if the pressure is too low or too high, or the filters are clogged, watering may be disrupted.

Before setting up irrigation

Take into account the inlet pressure, water source, and watering duration. Check the amount delivered with a test cycle.

Browse timers and ready-made irrigation systems.

Automatic irrigation system for up to 10 pots at once — provides regular, even watering when you're away or don't have time to water by hand.

Detailed Specifications

• Type: automatic drip/micro-irrigation system (drip irrigation / micro-drip system). 

• Suitable for: pots, terraces, balconies, greenhouses, or small gardens — up to 10 individual plants (pots). 

• Material: plastic components (tubing, fittings), resistant to moisture and standard garden conditions. 

• Power / control: the system includes a control unit (timer / valve) for automatic water delivery on a set schedule. 

• Suitable water pressure and flow rate: a system for home gardens and pots — no professional plumbing required.

• Use: automatic watering of pots/containers — can reduce the need for manual watering, especially when you're away.

Usage Recommendations

• Connect the system to a water source — a tap, faucet, or hose — and place one tube in or beside each container or pot.

• Set a watering schedule (frequency and duration) based on your plants' needs — more often for leafy greens and flowers, less often for hardy or deep-rooted plants.

• When planting or transplanting — make sure the soil is well moistened before watering and that the system is set to deliver a moderate amount of water.

• If you're away — the system will automatically maintain moisture, but it's a good idea to check the tubing and water distribution periodically to prevent blockages.

• For maximum effectiveness — pair with well-drained pots and a suitable growing medium to prevent overwatering.

Before Setting Up Irrigation

Take into account the inlet pressure, water source, and watering duration. Check the amount of water delivered with a test cycle.

Browse timers and ready-made irrigation systems.

Automatic watering timer for 1 zone, controlling water supply according to a set schedule—ideal for gardens, greenhouses, flower beds, and hose-based irrigation systems.

• Type: 1-zone electronic timer.
• Power: 2xAA batteries
• Material: ABS+PP housing, resistant to outdoor conditions.
• Operating pressure: approximately 0.5–8 bar, suitable for standard plumbing and hose systems.
• Watering settings: set the frequency—from hourly to daily—and repeat intervals from 1 to 7 days.
• Features: automatic watering, waterproof housing, ideal for home gardens and greenhouses.

Usage recommendations

• Connect the timer to a standard hose or irrigation system, then set the desired watering time and frequency—the device will take care of the rest automatically.
• Suitable for gardens, balconies, greenhouses, pots, and flower beds—anywhere you cannot water by hand every day.
• A good choice when you are away (on vacation, traveling, etc.) to maintain regular moisture.
• Use only when the water pressure is between 0.5 and 8 bar

Before setting the watering schedule

Take the inlet pressure, water source, and watering duration into account. Check the water volume delivered with a test cycle.

Browse irrigation controllers and ready-made irrigation systems.