Chillers / Coolers

Maintaining a constant nutrient-solution temperature in hydroponic systems (NFT and DWC) within optimum limits is extremely important for preserving oxygen levels and protecting roots from Pythium* and other diseases.

With the Hailea HC-250A Chiller 600 - 2200 l/h, controlling water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• environmentally friendly refrigerant R134a
• low noise levels
• easy-to-use digital controller
• function for automatic shutdown against overheating
• for a tank / aquarium volume of: 250 l

The chiller is designed to operate with a water pump delivering 600 to 2200l/h (sold separately).

Instructional video: here.*

Features:

• model: HC-250A
• recommended flow rate: 600 - 2200 l/h
• for a tank / aquarium volume of: 250 l
• fittings: 2x ⌀ 25 mm (included)
• power: 1/6 HP
• power consumption: 300 W
• voltage: 220-240V, 50Hz
• current: 1.3A
• dimensions: 448 x 330 x 440 mm
• weight: 18 kg
• warranty: 1 year

Recommendations: The chiller should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Simply fill the chiller with clear vinegar, leave it for 24 hours and then rinse with water. Make sure you also place an air-circulation fan near the chiller to avoid heat build-up.

Please note:

1. The flow rate is determined according to the pump's maximum flow (submersible pump or another external power filter) and the circulation equipment.
2. The cooling-performance test is shown when the ambient temperature is 30°C, the water temperature before cooling is 28°C, the set temperature is 16°C and the cooled water is no more than 250 litres. As the water is cooled, its temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use alternatives to avoid affecting appliance performance.
4. When there is insufficient air exchange in a room, cooling efficiency is reduced if the ambient temperature rises due to heat from the unit.

Maintaining a constant nutrient-solution temperature in hydroponic systems (NFT and DWC) within optimum limits is extremely important for preserving oxygen levels and protecting roots from Pythium* and other diseases.

With the Hailea HC-2200BH Chiller 1500 - 4000L/h, controlling the water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• environmentally friendly refrigerant R134a
• low noise levels
• easy-to-use digital controller
• function for automatic shutdown against overheating
• for a reservoir / aquarium with a volume of: 2000 L 
• The chiller is designed to operate with a water pump with a flow rate of 1500 to 4000L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-2200BH
• recommended flow rate: 1500 - 4000 L/h
• for a reservoir / aquarium with a volume of: 2000 L
• fittings: 4x ⌀ 25 mm (included)
• power: 2 HP
• power consumption: 1610 W
• voltage: 220-240V, 50Hz
• amperage: 7A
• dimensions: 634 x 468 x 590 mm
• weight: 47 kg
• warranty: 1 year

Recommendations: The chiller should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Simply fill the chiller with clear vinegar, leave it for 24 hours and then rinse with water. Make sure you also place an air-circulation fan near the chiller to avoid heat build-up.

Please note:

1. The flow rate is determined according to the pump's maximum flow (submersible pump or another external power filter) and the circulation equipment.
2. The cooling-performance test is shown when the ambient temperature is 30°C, the water temperature before cooling is 28°C, the set temperature is 16°C and the cooled water volume is no more than 2000 litres. When water cooling is reduced, the water temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use alternatives to avoid affecting appliance performance.
4. When there is insufficient air exchange in a room, cooling efficiency is reduced if the ambient temperature rises due to heat from the unit.

Tecoponic HY2000 Chiller – Water cooler for hydroponic systems

Short description:

•  Precision cooling: Maintains the ideal nutrient-solution temperature (5°-35°C).
•  Energy efficiency: High-quality compressors and a titanium heat exchanger for low consumption.
• Convenient design: Compact and suitable for aquariums and systems up to 2000 litres.

Detailed description:

The Tecoponic HY2000 Chiller is a high-quality water chiller designed for hydroponic systems and aquariums up to 2000 litres. Thanks to its advanced technology, it maintains the optimum nutrient-solution temperature needed for healthy plant growth.

Key features:

• Cooling technology: Eco-friendly R134a refrigerant and a titanium heat exchanger for high performance and energy efficiency.
• Digital thermostat: Precise temperature reading with adjustment in the 5°-35°C range and 0.1°C resolution.
• Efficient design: Compact, rust-resistant housing, easy maintenance with a magnetic air filter.
• Unique feature: Built-in heater for continuous temperature maintenance in all conditions.

Technical data:

• Power supply: 230V-50Hz
• Power consumption: 440W
• Flow rate: 600 L/h - 800 L/h
• Dimensions: 31 x 31 x 51 cm
• Weight: 21.4 kg
• Connections: 3/4" fitting

Maintaining a constant nutrient-solution temperature in hydroponic systems (NFT and DWC) within optimal limits is essential for preserving oxygen levels and protecting roots from pythium* and other diseases.

With the Hailea HC-150A 250–1200 l/h chiller, controlling water temperature in your hydroponic system or aquarium is easier than ever!

• Compatible with fresh and salt water
• environmentally friendly refrigerant R134a
• low noise levels
• easy-to-use digital controller
• Automatic overheating shut-off
• For reservoir/aquarium volume: 150 l

The chiller is designed to operate with a water pump with a flow rate of 1000L/h (sold separately).

Instructional video: here.*

Features:

• Model: HC-150A
• Recommended flow rate: 250–1200 l/h
• For reservoir/aquarium volume: 150 l
• fittings: ⌀ 12 or ⌀ 17 mm (included)
• Power: 1/10 HP
• Power consumption: 170 W
• voltage: 220-240V, 50Hz
• Current: 1.1 A
• Dimensions: 420 x 248 x 365 mm
• Weight: 15.0 kg
• warranty: 1 year

Recommendations: Clean the chiller every 3–4 months to remove mineral deposits and limescale. Simply fill the chiller with clear vinegar, leave it for 24 hours, then rinse with water. Also ensure you place an air-circulation fan near the chiller to avoid heat buildup.

Please note:

1. The flow rate is determined according to the pump's maximum flow (submersible pump or another external power filter) and the circulation equipment.
2. Cooling-performance testing is shown at an ambient temperature of 30°C, water temperature before cooling of 28°C, set temperature of 16°C and no more than 150 litres of chilled water. As water cooling is reduced, the water temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use alternatives to avoid affecting appliance performance.
4. When there is insufficient air exchange in a room, cooling efficiency is reduced if the ambient temperature rises due to heat from the unit.

Maintaining a constant nutrient-solution temperature in hydroponic systems (NFT and DWC) within optimum limits is extremely important for preserving oxygen levels and protecting roots from Pythium* and other diseases.

With the Hailea HC-100A Chiller 1500 - 4000L/h, controlling water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• environmentally friendly refrigerant R134a
• low noise levels
• easy-to-use digital controller
• function for automatic shutdown against overheating
• for a reservoir / aquarium with a volume of: 1000 L

The chiller is designed to operate with a water pump with a flow rate of up to 4000L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-1000A
• recommended flow rate: 1500 - 4000 L/h
• for a reservoir / aquarium with a volume of: 1000 L
• fittings: included
• power: 1 HP
• power consumption: 780 W
• voltage: 220-240V, 50Hz
• current: 3.2 A
• dimensions: 520 x 400 x 480 mm
• weight: 31.3 kg
• warranty: 1 year

Recommendations: The chiller should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Simply fill the chiller with clear vinegar, leave it for 24 hours and then rinse with water. Make sure you also place an air-circulation fan near the chiller to avoid heat build-up.

Please note:

1. The flow rate is determined according to the pump's maximum flow (submersible pump or another external power filter) and the circulation equipment.
2. Cooling performance is shown when the ambient temperature is 30°C, the water temperature before cooling is 28°C, the set temperature is 16°C and the chilled water volume is no more than 1000 litres. As the amount of water being cooled is reduced, the water temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use alternatives to avoid affecting appliance performance.
4. When there is insufficient air exchange in a room, cooling efficiency is reduced if the ambient temperature rises due to heat from the unit.

Maintaining a constant nutrient-solution temperature in hydroponic systems (NFT and DWC) within optimum limits is extremely important for preserving oxygen levels and protecting roots from Pythium* and other diseases.

With the Hailea HC-100A Chiller 200 - 1000 L/h, controlling the water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• environmentally friendly refrigerant R134a
• low noise levels
• easy-to-use digital controller
• function for automatic shutdown against overheating
• for a reservoir / aquarium with a capacity of: 100 L

The chiller is designed to operate with a water pump with a flow rate of 1000 L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-100A
• recommended flow rate: 200 - 1000 L/h
• for a tank / aquarium with a capacity of: 100 l
• fittings: ⌀ 13 mm (included)
• power: 1/20 HP 
• power consumption: 130 W
• voltage: 220-240V, 50Hz
• amperage: 0.6A
• dimensions: 338 x 218 x 325 mm
• weight: 9.2 kg
• warranty: 1 year

Recommendations: The chiller should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Simply fill the chiller with clear vinegar, leave it for 24 hours and then rinse with water. Make sure you also place an air-circulation fan near the chiller to avoid heat build-up.

Please note:

1. The flow rate is determined according to the pump's maximum flow (submersible pump or another external power filter) and the circulation equipment.
2. Cooling performance is tested at an ambient temperature of 30°C, a pre-cooling water temperature of 28°C, a set temperature of 16°C and a chilled-water volume of no more than 100 litres. When the amount of water being cooled is reduced, the water temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use alternatives to avoid affecting appliance performance.
4. When there is insufficient air exchange in a room, cooling efficiency is reduced if the ambient temperature rises due to heat from the unit.

Maintaining a constant nutrient-solution temperature in hydroponic systems (NFT and DWC) within optimum limits is extremely important for preserving oxygen levels and protecting roots from Pythium* and other diseases.

With the Hailea HC-130A 200 - 1000 L/h chiller, controlling the water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• environmentally friendly refrigerant R134a
• low noise levels
• easy-to-use digital controller
• function for automatic shutdown against overheating
• for tank / aquarium volume: 130 L

The chiller is designed to operate with a water pump with a flow rate of 1000L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-130A
• recommended flow rate: 200 - 1000 L/h
• for tank / aquarium volume: 130 L
• fittings: ⌀ 12 or ⌀ 17 mm (included)
• power: 1/15 HP 
• power consumption: 130 W
• voltage: 220-240V, 50Hz
• amperage: 0.8A
• dimensions: 338 x 218 x 325 mm
• weight: 9.5 kg
• warranty: 1 year

Recommendations: The chiller should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Simply fill the chiller with clear vinegar, leave it for 24 hours and then rinse with water. Make sure you also place an air-circulation fan near the chiller to avoid heat build-up.

Please note:

1. The flow rate is determined according to the pump's maximum flow (submersible pump or another external power filter) and the circulation equipment.
2. Cooling performance is shown when the ambient temperature is 30°C, the water temperature before cooling is 28°C, the set temperature is 16°C and the chilled water is no more than 130 litres. As the water cooling decreases, the water temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use alternatives to avoid affecting appliance performance.
4. When there is insufficient air exchange in a room, cooling efficiency is reduced if the ambient temperature rises due to heat from the unit.