Cornwall Electronics

With the Cornwall voltage controller you can reduce the power at which your fans operate, thereby reducing noise emissions and supporting increased humidity.

 

• Power: up to 280W
• Voltage: 230V, 50Hz
• Amperage: up to 1.6A

Instructions for use:

 

1. Connect the controller to the mains power supply.
2. Connect the desired device to the controller.
3. The controller's indicator light should come on if it is switched on.
4. Use the rotary knob to set the desired power.

Cornwall oscillating clip fan.

• Diameter: 22cm
• Power: 20W
• Speeds: 2 speeds
• 90° oscillation angle
• Power cable: 1.2m
• Voltage: 220-240V - 50-60Hz

CORNWALL TH3 dual-point digital thermohygrometer for measuring temperature and humidity levels. It is equipped with a probe that provides a second temperature measurement. The screen size makes the data much easier to read.

 

• External temperature (at the probe): -50°C ~ 70°C (-58°F ~ 158°F)
• Internal temperature: 0°C ~ 50°C (32° F ~ 122°F)
• Accuracy: +/- 1°C
• Humidity: 20% RH ~ 98% RH
• Accuracy: +/- 1% RH
• 1 pc. 1.5V AAA battery (included)

Clip-on circulation fan by Cornwall.

• Diameter: 15 cm / 6''
• Power: 15W
• Speeds: 2 speeds
• Power cable: 1.2m
• Voltage: 230V AC, 50Hz

Cornwall DUCTO 2 outlet fan 125mm 190m3/h

 

• Capacity: 190m³/h
• Flange: 125mm / 5"
• RPM: 2400
• Power: 20W
• Voltage: 220-240V, 50-60Hz

 

Note: the fan comes without a power cable!

 

You can find a power cable: here*

Wall-mounted circulation fan with remote control by Cornwall Electronics.

• Diameter: 40 cm / 16''
• Power: 45 W
• Speeds: 3 speeds
• Voltage: 220-240V AC, 50Hz

Cornwall DUCTO 3 extractor fan 150 mm 305 m3/h

 

• Capacity: 305 m³/h
• Flange: 150 mm / 6"
• RPM: 2400
• Power: 30W
• Voltage: 220-240V, 50-60Hz

 

Note: the fan comes without a power cable!

 

You can find a power cable: here*

The CORNWALL humidity controller is the ideal device for ensuring optimum humidity for your crop. Connect it to your humidifier or dehumidifier and set the desired humidity. The controller does the rest.

• Voltage: 230V AC/50HZ
• Maximum load: 16A 3680W
• Inductive load: 2A 460W
• Operating temperature: 5°C - 40°C
• Storage temperature: -10°C - 50°C
• Controlled humidity range: 20% - 90%
• Accuracy: ±5%
• Sampling interval: 10 sec

Please read the instructions before use:

• Before setting the humidity, select the operating mode: dehumidification (fan icon) or humidification (droplet icon). In “dehumidification” mode, the controller supplies power when humidity exceeds the set value; in “humidification” mode, when humidity falls below the set value.
• To change the operating mode, press ON/OFF and the “up arrow” together for 3 seconds.
• Default setting: Humidity (SET): 40%; Mode: Humidification
• Setting the humidity: press ON/OFF

Humidification mode (droplet icon):

• use the arrows to set the SET value at least 5% above the RH humidity (the currently measured humidity). After a few minutes, the indicator will turn green and the controller will begin supplying power;
• when the room humidity (RH) reaches the SET level, the indicator turns red, the droplets disappear from the display and the controller stops supplying power.
• when the room humidity (RH) is above the SET level, the indicator is red and the controller will not supply power.

Dehumidification mode (fan icon):

• use the arrows to set the SET value at least 5% below the RH humidity (the currently measured humidity). After a few minutes, the indicator will turn green and the controller will begin supplying power;
• when the room humidity (RH) falls to the SET level, the indicator turns red, the fan disappears from the display and the controller stops supplying power.
• when the room humidity (RH) is below the SET level, the indicator is red and the controller will not supply power.

Important:

• Do not connect a power strip after the controller!
• Do not connect devices that transmit vibrations to the controller!
• Ensure the safety of heating and moving appliances!
• Keep away from moisture, extreme temperatures, impacts and vibrations!
• Use indoors only; do not expose to sunlight!
• Keep away from children!

Recharge the battery when the device shows “LO” by plugging the device into a socket!

 

Cornwall TT extractor fan 2 speed 125 (220/280m3/h) is a turbine fan with two speeds that can be used for supply or extraction in small spaces such as bathrooms, kitchens, small shops, and more.

 

• equipped with clips allowing removal for cleaning or changing the airflow direction without dismantling
• 1^st speed: 0.18A, 23W, 1950 rpm, 220m³/h
• 2^nd speed: 0.27A, 37W, 2455 rpm, 280m³/h
• Voltage: 220/240V - 50Hz
• Flange: 125mm

Cornwall 6L Humidifier is made from recyclable plastic. It can operate continuously for 16 hours. Through ultrasonic-wave vibration, the humidifier breaks water droplets into particles from 1 to 5 μm. The particles are then diffused by a fan. During this process, a large number of anions are produced and dispersed. This allows the unit to humidify and cool the air. Its main features are as follows:

 

• produces a soft, refreshing mist
• energy-saving
• quiet
• automatic shut-off
• long service life

 

• Voltage: 220-240 V; ~ 50Hz
• Power: 25W
• Water tank: 6L
• Maximum: 350ml/h

Cornwall DUCTO 1 extractor fan 100mm 107m3/h

 

• Capacity: 107m³/h
• Flange: 100mm / 4"
• RPM: 2300
• Power: 15W
• Voltage: 220-240V, 50-60Hz

 

Note: the fan is supplied without a power cable!

 

You can find a power cable: here*

Cornwall Temperature Controller, ideal for stabilizing the temperature of your crop. It is suitable for use with both an air conditioner and other heating appliances (heaters), depending on the selected function.

• Voltage: 230V AC/50HZ
• Maximum load: 16A 3680W
• Inductive load (exhaust fan): 2A 460W
• Operating temperature: 0°C - 40°C
• Storage temperature: -10°C - 50°C
• Controlled temperature: 5°C - 30°C / 40°F - 85°F
• Accuracy: ±1°C / ±3°F
• Reading interval: 10 sec

Please read the instructions before use:

• Before setting the temperature, select the operating mode – cooling (snowflake icon) or heating (flame icon). In “cooling” mode, the device supplies power when the temperature exceeds the set value; in “heating” mode, when the temperature falls below the set value. To change the operating mode, press ON/OFF and “up arrow” together for 3 seconds.
• To switch between °C and °F, press “up arrow” and “down arrow” together for 3 seconds
• Default setting – cooling; 20°C
• Setting the temperature – press ON/OFF

Mode Cooling:

• Use the arrows to set the “SET” temperature at least 2° below the “RM” temperature (the currently measured temperature). After a few minutes, the indicator will turn green and the controller will begin supplying power;
• When the “RM” temperature reaches the “SET” temperature, the indicator will turn red and the snowflake will disappear from the display; the controller will stop supplying power.
• When the “SET” temperature is above the “RM” temperature, it will be red and the controller will not supply power.

Mode Heating:

• Use the arrows to set the “SET” temperature at least 2° above the “RM” temperature (the currently measured temperature). After a few minutes, the indicator will turn green and the controller will begin supplying power;
• When the “RM” temperature reaches the “SET” temperature, the indicator will turn red and the flame will disappear from the display; the controller will stop supplying power.
• When the “SET” temperature is below the “RM” temperature, it will be red and the controller will not supply power.

Important:

• Do not connect a power strip after the controller!
• Do not connect devices that transmit vibrations to the controller!
• Ensure the safety of heating and moving appliances!
• Protect from moisture, extreme temperatures, impacts and vibrations!
• Use indoors only; do not expose to sunlight!
• Keep away from children!

Recharge the battery when the device shows “LO” by plugging the device into a socket!

Enhance your surroundings with the Humidifier Cornwall 8.5L – the perfect helper for maintaining optimal humidity at home or in the office.

Capacity: 8.5 litres, ensuring long-lasting operation without frequent refilling. Technology: Modern ultrasonic technology for even and quiet water-mist dispersion. Adjustment: Adjustable humidification intensity to suit your needs. Design: An elegant, compact design that fits easily into any interior. Benefits: Maintains healthy, comfortable room humidity, helping prevent dry skin and respiratory discomfort. Quiet operation, ideal for bedrooms and workspaces. Easy to use and maintain. An eco-friendly solution for improving air quality. With Humidifier Cornwall 8.5L, you will notice the difference in comfort and quality of life. Ideal for seasons when heating or air conditioning is running at full power.

Cornwall TT extractor fan 2 speed 100 (145/187m3/h) is an inline fan with two speeds, which can be used for supply or extraction in small spaces such as bathrooms, kitchens, small shops and more.

 

• equipped with clips allowing removal for cleaning or changing the airflow direction without dismantling
• 1^st speed: 0.11A, 21W, 2180 rpm, 145m³/h
• 2^nd speed: 0.21A, 33W, 2385 rpm, 187m³/h
• Voltage: 230V - 60/50Hz
• Flange: 100mm

Cornwall TT extractor fan 2 speed 150 (405/520m3/h) is an inline fan with two speeds that can be used for supply or extraction in small spaces such as bathrooms, kitchens, small shops and more.

 

• equipped with clips allowing removal for cleaning or changing the airflow direction without dismantling
• 1^st speed: 0.17A, 30W, 1680 rpm, 405 m³/h
• 2^nd speed: 0.27A, 60W, 2460 rpm, 520 m³/h
• Voltage: 220/240V - 50Hz
• Flange: 150 mm

Cornwall Ozonizer 7W 200mg/h. neutralises odours and gases, microorganisms and pests.

 

• Ozone output: 200 mg/h
• suitable for use in a room of up to 15m² in area
• operating time: up to 30 minutes every hour
• voltage: 220-240V AC 50 Hz
• maximum load: 16A 3600W (non-inductive)

Ozone oxidises and eliminates:

 

• odours (e.g. mould, cigarettes, cat litter) and harmful gases (e.g. organic solvents)
• bacteria, microorganisms and mould and fungal spores
• helps prevent the spread of dust mites, pet allergens and cockroaches
• completely sterilises the room environment

 

The device has a built-in timer for automatic switching on and off, is easy to install and effectively distributes ozone throughout the room by means of a fan.

 

Instructions for use:

 

• Mount the ozonizer using double-sided adhesive tape or the holes on the back of the device, at a height of 2m so that the ozone can disperse correctly, then plug it in. (The device can only be used and operate correctly when mounted on a wall.)
• The power indicator will switch on automatically.
• Press the "Operating interval" button to select how often it will switch on - 1 hour, 2 hours, 6 hours, 8 hours or 12 hours. The indicator will show the set time. The default setting is 6 hours with ozone treatment for 20 min.
• Set the desired operating time - 10 min., 20 min. or 30 min.
• When you have finished the settings, close the cover.
• To stop, press the "STOP" button or disconnect from the mains.
• If you will not use the device for a long time, disconnect it from the mains.

 

Safety precautions:

 

• Do not inhale directly from the device!
• Keep out of reach of children!
• Store in a dry, cool place!
• If you will not use the appliance for an extended period, disconnect it from the mains!
• Use only when the appliance is mounted on the wall!

 

WARNING! Ozone can cause corrosion of metal parts and damage to organic materials! Ozone also has harmful effects on people. For complete safety, do not remain in the room while the appliance is operating.

Desk, floor or wall-mount circulation fan from Cornwall Electronics.

• Diameter: 45cm / 18''
• Power: 45 W
• Speeds: 3 speeds
• For desk, floor or wall mounting
• Adjustable height
• Maximum height 125cm
• 90° head rotation
• Low power consumption
• Dimensions: 50x44x125cm

Cornwall 18W 500mg/h ozoniser neutralises odours and gases, microorganisms and pests.

• ozone output: 500mg/h
• power: 18W
• operating modes: 2
• voltage: AC 220V, 50 Hz

Operating instructions:

1. Switch on the power at the side of the device; the power indicator lights up and the device is ready for use.
2. Press the "Mode / Stop" button once; the "Ozone Mode 1" indicator lights up, showing that the unit has entered programme One.
3. Press the "Mode / Stop" button again; the "Ozone Mode 2" indicator lights up, showing that the unit has entered programme Two.

Safety warnings:

1. Warning symbol: This symbol reminds the user that this machine operates at high voltage.
2. Warning symbol: This symbol reminds the user to handle and maintain the appliance carefully.
3. Use it correctly according to the instructions.

Two ozone modes:

1. Ozone 1: A 15-minute cycle repeats continuously, then switches off for 120.
2. Ozone 2: The ozoniser will operate for 10 minutes and then switch off.

Cornwall 12l/day Dehumidifier removes excess moisture from the air, creating a comfortable environment for your home and office. Its compact design makes it easy to move.

 

• Capacity (approx.): 12l/24h
• Coverage area: from 15 to 20m²
• Air flow: 448m³/h.
• Power consumption: 220W
• Dimensions: 29 x 17 x 51cm.