Hydroponic and Irrigation Systems

Hydroponic baskets (mesh pots). Suitable for hydroponic and aeroponic systems. Small sizes are suitable for rooting systems.

PLANTiT Water Timer is designed for connecting to a tap, but can also be used for gravity-fed irrigation from a barrel or tank. Programming the timer takes just 2 easy steps – turn the Run Time dial to the desired watering duration and the Frequency dial to the desired interval between watering cycles. Then connect it to the irrigation outlet pipe and the timer takes care of the rest.

• Designed for connection to a tap
• The protective cover makes it fully waterproof
• Powered by two 1.5V AAA batteries (not included), which can last a whole season without needing replacement
• Automatic shut-off valve for when the battery is depleted, plus a program delay button for plant maintenance when you do not want to water
• Supplied with a set of fittings and a built-in filter

Technical specifications:

• Operating pressure range: 0-150 PSI (0-10 BAR)
• Connection: ¾ male / female connector / hose connector
• Frequency: choose watering every 1, 2, 3, 4, 6, 8, 12, 24, 48 or 72 hours, or 1 week
• Run time (watering): 1, 3, 5, 10, 15, 20, 30, 60, 90 or 120 minutes

The BOYU FP-1500 1500l/h submersible water pump is suitable for all hydroponic systems and systems that require pumping nutrient solutions. Its shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 25W
• maximum water head: 2.5m
• maximum flow rate: 1500l/h
• outlet diameter: ⌀ 13 mm
• dimensions: 104 x 93 x 140mm

The BOYU FP-750 submersible water pump, 750L/h, is suitable for all hydroponic systems and those that require pumping nutrient solutions. Its shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the smart design.

• voltage: 230V, 50/60Hz
• power: 12W
• maximum head height: 1.5m
• maximum flow rate: 750L/h
• outlet diameter: ⌀ 13mm
• dimensions: 224 x 139 x 144mm

Garland 60cm² is a lightweight, square and impact-resistant tray made of durable polymer. You can use it with seedling/cutting trays or plant directly in it after adding soil. If necessary, you can make drainage holes. It is ideal for use as part of a gravity-fed system with AutoPot AQUAvalve and large pots.

• Dimensions: 60 x 60 x 7cm\n
• Material: recycled polypropylene\n

BOYU FP-1000 1000L/h submersible water pump is suitable for all hydroponic systems and systems that require pumping nutrient solutions. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 16W
• max. water head: 1.8m
• max. flow rate: 1000L/h
• outlet diameter: ⌀ 15mm
• dimensions: 89 x 70 x 111mm

BOYU FP-150 150l/h submersible water pump is suitable for all hydroponic systems and those that require pumping nutrient solutions. The shaft is corrosion-resistant, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 2.5W
• max. water head: 0.6m
• max. flow rate: 150l/h
• outlet diameter: ⌀ 11mm
• dimensions: 50 x 43 x 48mm

Outer diameter of inlet opening: 9mm 

Outer diameter of outlet openings: 4mm

Outer diameter of the inlet: 13mm 

Outer diameter of the outlets: 6mm

BOYU FP-100 submersible water pump 120L/h is suitable for all hydroponic systems and those that require pumping nutrient solutions. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• Power: 1.5W
• Maximum head height: 0.3m
• Maximum flow rate: 120L/h
• Outlet diameter: ⌀ 8mm
• Product dimensions: 40 x 36 x 42mm

BOYU SES-10 air pump is specially designed for quiet operation. It has an aluminum motor shell, good heat dissipation and long life. Features high flow rate and high pressure air.  

• current: 230V, 50/60Hz
• power: 10W
• pressure: > 0.02Mpa
• flow rate: 10l/min / 600l/h
• outlet diameter: ⌀ 8mm
• dimensions: 187 x 107 x 114mm

The BOYU FP-350 350l/h submersible water pump is suitable for all hydroponic systems and systems that require pumping nutrient solutions. Its shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 6W
• maximum water head: 0.8m
• maximum flow rate: 350l/h
• outlet diameter: ⌀ 13 mm
• dimensions: 69x54x82 mm

The AutoPot 1Pot module can be used for plants of any type and size. The AutoPot 1Pot module is easy to expand, as many pots can be connected to one reservoir.

All AutoPot products operate:

• WITHOUT ELECTRICITY
• WITHOUT PUMPS
• WITHOUT TIMERS

Gravity pressure is all that is required from the water reservoir or barrel. The systems are undoubtedly among the easiest to use and can be left unattended for weeks, thanks to the ability of the AQUAvalve valve to deliver everything the plant requires. AutoPot 1Pot modules can be connected to build even larger systems. See the advice section for more information or download the 1pot System Guide*.

1Pot is the modular irrigation system from AutoPot, enabling gardeners and commercial growers to achieve remarkable yields from their plants. Whether at home, in the garden, greenhouse or polytunnel, 1Pot will expand to create a system of unlimited scale thanks to its modular design. The 1Pot systems remain flexible even after installation, and the modules can be moved to suit the changing needs of the grower and their plants. Like all AutoPot irrigation systems, 1Pot uses AQUAvalve valve for simple, efficient feeding and irrigation of edible or ornamental plants. Once assembled, the reservoir is filled with water and liquid fertiliser (if necessary), and the 1Pot system will fully take care of all your feeding needs, providing them with fresh, balanced nutrition throughout their life cycle.

The AutoPot 1Pot module system is easily expandable, as many pots can be connected to a single reservoir. Please see examples of typical layouts using 6 mm tubing or 16 mm tubing. The pots and trays can easily be moved as desired; if the plants become too large, they can be spaced further apart with ease. Once assembled and connected to a reservoir filled with nutrient solution, this exceptionally versatile system will take care of all your needs.

All you need to do is remember to refill your reservoir from time to time. Reservoirs and filters are sold separately.

The AutoPot 1Pot module includes:

• 1x 1Pot system
• 1x tray and lid
• 1x 15 L pot
• 1x AQUAvalve valve
• 1x 1.5 m 6 mm tubing
• 1x Marix disc (square) 186 mm x 86 mm (black)
• 1x root disc (square) 196 mm x 196 mm (black and gold)

Tip: Always use a 6 mm or 16 mm filter with every reservoir. Use quality compost, soil or coco with a 30-50% mix of perlite.

Wave Maker 3000 by Neptune Hydroponics is a water circulator for mixing nutrient solutions in containers, promoting water oxygenation.

• Power: 6W
• Flow rate: 3000 L/h
• Voltage/frequency: 220V-240V/50Hz
• Weight: 0.5 kg

Note: This product is specifically designed to create water movement. It is not a filter pump. Please consult your distributor before use.

WARNING: Please ensure that all pump parts are in good condition before use. Do not connect it to the mains if the voltage differs from that stated on the label.

• We recommend keeping the magnets separate before they are fitted. Avoid placing your hands between them due to their strong magnetism, and remove all metal objects or other magnets so they are not attracted, preventing possible injury.
• The strong magnetism produced by magnets can cause permanent damage to electrical equipment and other objects, such as pacemakers, credit cards, keys ... Keep at a safe distance of at least 30 centimetres.
• Keep out of reach of children and pets!

BOYU FP-3000 submersible water pump 3000 l/h is suitable for all hydroponic systems and systems requiring nutrient-solution pumping. The shaft is non-corrosive and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to its intelligent design.

• voltage: 230V, 50/60Hz
• power: 68W
• height of the water column max: 3.5m
• flow max: 3000l/h
• outlet diameter: ⌀ 19mm
• dimensions: 132 x 106 x 172mm

Air stones are the ideal solution for increasing the oxygen concentration in water.

Simply connect it to your air pump. 

Stone size: Ø125mm

Air stones are the ideal solution for increasing the oxygen concentration in water.

Simply connect it to your air pump. 

The BOYU hydroponic air stone is an indispensable accessory for your soilless plant-growing system.

Wassertech 190L/day Reverse Osmosis System is a purification device that enables you to obtain impurity-free water without any contaminants, such as toxic and carcinogenic chemicals, bacteria and viruses. Filtered by such a device, water contains far fewer chemical compounds, which makes it easier to control nutrient levels in the water.

Filtration takes place in 3 stages:

1. Sediment filter – removes large particles from the water
2. Activated carbon filter – improves the taste of the water
3. Reverse osmosis membrane – removes bacteria, heavy metals, dissolved substances and salinity

Reverse-osmosis-filtered water has:

1. neutral pH: 7.0
2. electrical conductivity (EC): 0.0mS/cm

Technical specifications:

• Pure water flow rate: 0.13L/min
• Inlet water pressure: min. 14.5, max. 43.5psi
• Inlet water temperature: min. 5°C, max. 45°C

The  BOYU S-500 air pump is made from high-polymer composite rubber for a longer service life and reliability. It features low operating noise, high air capacity and requires no oil lubrication. It also has electronic inlet ratio control for high efficiency and low energy consumption.

• voltage: 230V, 50/60Hz
• power: 2.8 W
• pressure: > 0.010 MPa
• flow rate: 4l/min / 240l/h
• outlet diameter: ⌀ 4 mm
• weight: 0.3 kg
• dimensions: 116 x 70 x 56 mm

BOYU FP-2000 2000 L/h submersible water pump is suitable for all hydroponic systems and applications that require pumping nutrient solutions. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the smart design.

• voltage: 230V, 50/60Hz
• power: 43W
• maximum head height: 3.0m
• maximum flow rate: 2000L/h
• outlet diameter: ⌀ 19mm
• dimensions: 118 x 101 x 158mm

5 cm neoprene cloning disc. The neoprene disc enables aeroponic cloning by placing the cutting in the slit at the centre of the disc. The central slit makes it easy to insert and remove the cutting.

• Diameter: ⌀ 50mm
• Depth: 12.7mm

Air stones are the ideal solution for increasing the oxygen concentration in water.

Simply connect it to your air pump. 

Stone size: Ø100 mm

• Adjusted by turning the cap
• Suitable for 4mm tubing
• Height: 13.5cm
• Weight: 11 grams

A solution for pots, tubs, landscaped gardens and nurseries. Ideal for hanging pots. Suitable for all types of domestic and professional irrigation systems.

Maximum flow rate 33 litres/hour and 40cm radius at 1bar(14psi) water pressure
Maximum flow rate 49 litres/hour and 90cm radius at 2bar(30psi) water pressure

https://www.youtube.com/watch?v=T56BsyDEGXk&

Additional information:

https://antelco.com/assets/products/datasheets/Page-1-Shrubbler-Adjustable.pdf