HPS Bulbs / Lamps

LUMii BLACK Dual Spec 600W – HPS lamp

The LUMii BLACK 600W HPS Lamp is a dual-spectrum sodium / HPS bulb / lamp, suitable for both growth / vegetative growth and the flowering phase.

• for growth and flowering
• power: 600W
• luminous flux:88,000 Lm
• efficiency: 147 Lm/W
• color temperature: 2000 K
• lifespan: 20,000 h
• socket: E40

Note:to ignite the lamp, it is necessary to connect it to a choke and ignitor or electronic ballast, which are sold separately (you can purchase them here*).

Recommendations:

• Connect to the mains using a suitable ballast.
• Keep at least 50 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To get the most out of sodium lamps, it is recommended not to use them for more than one year.

Warning:

• Electric shock hazard - disconnect the power supply before installing, removing, or inspecting the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage, or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental legislation!
• Burn hazard - allow the lamp to cool first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool at least once a week!
• At the end of the lamp's life - indicated by the lamp switching on and off periodically or significant changes in color or brightness - the lamp must be replaced immediately!

Sylvania GroLux 600W – HPS lamp

Sylvania GroLux SHP-TS 600W is a dual-spectrum sodium / HPS bulb / lamp, suitable for both growth / vegetative growth and the flowering phase.

• for growth and flowering
• power: 600W
• amperage: 5.5A
• luminous flux:90,000 lm, 200,000 Phyto-lm
• efficiency: 150 lm/W
• color temperature: 2050 K
• lifespan: 26,000 h
• socket: E40

Detailed specifications:here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Keep at least 60 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To get the most out of sodium lamps, it is recommended not to use them for more than one year.

Caution:

• Electric shock hazard - disconnect the power supply before installing, removing, or inspecting the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control gear and an appropriate device!
• Damaged lamps may emit hazardous radiation and cause injury, poisoning, property damage, or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental regulations!
• Burn hazard - allow the lamp to cool first!
• Do not use excessive force when installing a lamp!
• Lamps must be switched off and allowed to cool at least once a week!
• At the end of the lamp's life - indicated by the lamp turning on and off intermittently or significant changes in color or brightness - the lamp must be replaced immediately!

Sylvania GroLux 400W – HPS lamp

Sylvania GroLux SHP-TS 400W is a dual-spectrum sodium / HPS bulb / lamp, suitable for both growth / vegetative growth and the flowering phase.

• for growth and flowering
• power: 400W
• luminous flux: 58,000 lm, 128,000 Phyto-lm
• efficiency: 145 lm/W
• color temperature: 2050 K
• life: 26,000 hours
• socket: E40

Note:to ignite the lamp, it must be connected to a choke and ignitor or electronic ballastrequired, which are sold separately (you can purchase them from here*).

Detailed specifications:here*

Recommendations:

• Connect to the mains via a suitable ballast.
• Position at least 50 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To achieve maximum efficiency from sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing, or inspecting the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control gear and a suitable fixture!
• Damaged lamps can emit dangerous radiation and may cause injury, poisoning, property damage, or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental legislation!
• Burn hazard - allow the lamp to cool first!
• Do not use excessive force when installing a lamp!
• Lamps should be switched off and allowed to cool at least once a week!
• At the end of the lamp's life - indicated by the lamp turning on and off intermittently or significant changes in color or brightness - the lamp must be replaced immediately!

Sylvania GroLux 250W – HPS lamp

Sylvania GroLux SHP-TS 250W is a dual-spectrum sodium / HPS bulb / lamp, suitable for both growth / vegetative growth and the flowering stage.

• for growth and flowering
• Power: 250W
• Amperage: 2.6A
• Luminous flux: 34,000 lm, 75,500 Phyto-lm
• Efficiency: 136 lm/W
• Color temperature: 2050 K
• Lifespan: 26,000 h
• Socket: E40

Note:to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (you can purchase them here*).

Detailed specifications:here*

Recommendations:

• Connects to the mains through a suitable ballast.
• Position at least 40 cm from the plant tops!
• Recommended ambient temperature: 25°C
• To get the maximum performance from sodium lamps, it is recommended that they be used for no more than one year.

Caution:

• Risk of electric shock - disconnect the power before installing, removing, or inspecting the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control gear and a suitable fixture!
• Damaged lamps may emit hazardous radiation and can cause injury, poisoning, property damage, or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool first!
• Do not use excessive force when installing a lamp!
• Lamps must be switched off and allowed to cool at least once a week!
• At the end of the lamp’s life - characterized by the lamp switching on and off intermittently or significant changes in color or brightness - the lamp must be replaced immediately!

Osram Plantastar 600W – HPS lamp

Osram Plantastar 600W is a dual-spectrum sodium / HPS bulb / lamp, suitable for both growth / vegetative growth and the flowering phase.

• for growth and flowering
• power: 600W
• current: 6.06A
• luminous flux: 90,000 lm
• efficiency: 150 lm/W
• PPF: 1100 µmol/s
• efficiency: 1.8 µmol/s
• color temperature: 2000 K
• lifetime: 20,000 h
• socket: E40

Note:to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (you can purchase them here*).

Detailed specifications:here*

Recommendations:

• Connect to the mains through a suitable ballast.
• Position at least 60 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To achieve maximum efficiency from sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Electric shock hazard - disconnect the power supply before installing, removing, or inspecting the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control gear and an appropriate device!
• Damaged lamps may emit hazardous radiation and can cause injury, poisoning, property damage, or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental regulations!
• Burn hazard - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lights should be switched off and allowed to cool at least once a week!
• At the end of the lamp's life - indicated by the lamp periodically switching on and off or significant changes in color or brightness - the lamp must be replaced immediately!

Osram Vialox NAV-T 600W – HPS lamp

Osram Vialox NAV-T (SON-T) 600W is a sodium / HPS bulb / lamp for the flowering phase.

• for flowering
• power: 600W
• amperage: 6.06A
• luminous flux: 90,000 lm
• efficacy: 150 lm/W
• color temperature: 2000 K
• lifespan: 20,000 h.
• socket: E40

Note:to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (you can purchase them from here*).

Detailed specifications:here*

Recommendations:

• Connect to the mains via a suitable ballast.
• Position at least 60 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To get the maximum efficiency from sodium lamps, it is recommended not to use them for more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or inspecting the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control equipment and a suitable device!
• Damaged lamps may emit hazardous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental regulations!
• Burn hazard - allow the lamp to cool first!
• Do not use excessive force when installing a lamp!
• Lamps must be switched off and allowed to cool at least once a week!
• At the end of the lamp's life - indicated by the lamp switching on and off intermittently or significant changes in color or brightness - the lamp must be replaced immediately!

Osram Vialox NAV-T 1000W - HPS lamp

Osram Vialox NAV-T (SON-T) 1000W is a sodium / HPS bulb / lamp for the flowering phase.

• for flowering
• power: 1000W
• amperage: 10.6A
• luminous flux: 130,000 lm
• efficiency: 130 lm/W
• color temperature: 2000 K
• lifespan: 8,000 h
• socket: E40

Note:to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (you can purchase them here*).

Detailed specifications:here*

Recommendations:

• Connects to the mains through a suitable ballast.
• Position at least 80 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To get the maximum performance from sodium lamps, it is recommended to use them for no more than one year.

Warning:

• Electric shock hazard - disconnect the power supply before installing, removing, or inspecting the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control gear and a suitable fixture!
• Damaged lamps may emit hazardous radiation and can cause injury, poisoning, property damage, or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental regulations!
• Burn hazard - allow the lamp to cool first!
• Do not use excessive force when installing a lamp!
• Lamps should be switched off and allowed to cool at least once a week!
• At the end of the lamp's life - characterized by the lamp switching on and off intermittently or significant changes in color or brightness - the lamp must be replaced immediately!

DLI Horticulture Plus 1000W DE – HPS

DLI Horticulture Plus 1000W DE HPS is a professional double-ended HPS grow and bloom lamp, optimized for high photosynthetic efficiency. DLI developed the spectrum with enhanced red and blue components, and the lamp delivers PPF 2100 µmol/s at a power consumption of 1020 W and an efficacy of 2.06 µmol/J. It is designed for DLI Joule Series systems and is compatible with most 1000 W DE fixtures.

DLI Horticulture Plus 1000W DE HPS is designed for professional greenhouse and indoor lighting where high light output and stable operation are required. The manufacturer highlights its specially optimized spectrum and gas mixture, designed to support high µmol output and a long service life.

This is a Double-Ended (DE) lamp with a K12x30s base, which should not be confused with standard single-ended E40 HPS bulbs.

Technical specifications

• Manufacturer: DLI – Dutch Lighting Innovations
• Series: Horticulture Plus
• Type: HPS / HID grow lamp
• Construction: Double-Ended (DE)
• Rated class: 1000 W
• Actual lamp power:1020 W
• Lamp voltage: 400 V
• PPF:2100 µmol/s
• Photon efficacy:2.06 µmol/s/W
• Base:K12x30s
• Length:394 mm
• Dimmable: No
• Product type: HID Grow Lamp
• Compatibility: Most 1000 W DE systems.

Spectrum and application

DLI states that the spectrum is optimized for higher photosynthetic efficiency, with the red and blue parts enhanced. This makes the lamp suitable for a full growing cycle, including intensive vegetative growth and flowering.

An additional retail source lists a color temperature of around 2000 K, which is characteristic of HPS lamps with a pronounced red-orange part of the spectrum.

 Luminous efficacy

PPF: 2100 µmol/s

Efficiency: 2.06 µmol/J

 Compatibility

The lamp is specially designed for:

• DLI Joule Series
• most 1000 W Double-Ended HPS systems
• fixtures with K12x30s holders.

It is important that the fixture and ballast are designed for 1000 W DE HPS lamps. It is not suitable as a direct replacement for a standard E40 HPS lamp.

 Service life

Lamp model with long average lifespan and high µmol output retention. 

For professional cultivation systems, periodic replacement is important, as light output gradually decreases over time with HPS technology.

 Dimensions

• Length:394 mm
• Approximate width: approximately 38 mm
• Base:K12x30s.

Gavita Pro Plus 1000W EL DE – HPS

• HPS EL DE (double-ended) lamp
• 1000W, 400V
• Socket: K12x30S
• PPFD: 2100 µMol
• Efficiency after one year of operation (about 5,000 hours) - >96%
• Designed for electronic ballasts

Lumatek HPS 1000W 240V – lamp

Lumatek HPS Lamp 1000W 240V is a pulse-start* sodium bulb designed to operate with the Lumatek 1000W 240V dimmable ballast. It is suitable for both growth / vegetative growth and the flowering phase. Manufactured using high-quality ceramic arc tube technology, the lamp can operate at higher internal temperatures, increasing power and efficiency. Pulse-start technology allows faster startup and restrike times, longer lamp life, and increased PAR / PPF maintenance.

• for growth and flowering
• power: 1000W
• amperage: 10.3A
• luminous flux: 130,000 lm
• efficacy: 130 lm/W
• PPF: 1850 μmol/s
• efficacy: 1.85 μmol/s
• color temperature: 2000K
• lifetime: 24,000 h.
• socket: E40

Note:to ignite the lamp, it is necessary to connect it to a ballast and ignitor or electronic ballast, which are sold separately (you can purchase them from here*).

Detailed specifications: here*

Recommendations:

• Connects to the mains through a suitable ballast.
• Position at least 60 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To achieve maximum efficiency from sodium lamps, it is recommended not to use them for more than one year.

Caution:

• Electric shock hazard - disconnect the power before installing, removing, or inspecting the lamp, and protect it from contact with water!
• Do not stare into the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control gear and a suitable fixture!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage, or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental legislation!
• Burn hazard - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• Lamps must be switched off and allowed to cool at least once a week!
• At the end of the lamp's life - characterized by the lamp periodically turning on and off or significant changes in color or brightness - the lamp must be replaced immediately!

Lumatek HPS 600W 400V – lamp

Lumatek HPS Lamp 600W 400V is a pulse-start* sodium bulb, suitable for both growth / vegetative growth and flowering. 400V HPS bulbs aremore efficient than standard HPS bulbs, allowing them to deliver a 10% increase in light intensity and PAR / PPF output. Manufactured using high-quality ceramic arc tube technology, the lamp can operate at higher internal temperatures, increasing output and efficiency. Pulse-start technology allows faster start-up and restrike times, a longer lamp life, and improved PAR / PPF maintenance.

• for growth and flowering
• power: 600W
• amperage: 3.6A
• luminous flux:90,000 lm
• efficiency: 150 lm/W
• PPF: 1100μmol/s
• efficiency: 1.83 μmol/s
• color temperature: 2000K
• lifespan: 24,000 hours
• socket: E40

Note:to start the lamp, it is necessary to connect it to a ballast and ignitor or electronic ballast, which are sold separately (you can purchase them from here*).

Detailed specifications:here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 60 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To achieve maximum efficiency from sodium lamps, it is recommended not to use them for more than one year.

Warning:

• Electric shock hazard - disconnect the power supply before installing, removing or inspecting the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control gear and a suitable device!
• Damaged lamps can emit hazardous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental regulations!
• Burn hazard - allow the lamp to cool first!
• Do not use excessive force when installing a lamp!
• Lamps must be switched off and allowed to cool at least once a week!
• At the end of the lamp's life - indicated by the lamp switching on and off periodically or significant changes in color or brightness - the lamp must be replaced immediately!