OptiClimate Air Conditioners

Replacement carbon filter for OptiClimate PRO 3 or PRO 4. OptiClimate climate systems from the water- and air-cooled PRO 3 and PRO 4 series have built-in dust and carbon filters. The OptiClimate carbon filter removes mould spores from the air and should be replaced every 10 to 12 weeks. One replacement set contains three filters.

‘Opticlimate 15000 Pro3’ is a high-quality water cooler designed for climate regulation in large spaces. The water-cooled OptiClimate 15000 PRO3 air conditioner has a cooling capacity of 15 kW, uses between 5 and 9 litres of water per minute and has 3 heating elements rated at 2700 W. Name: OptiClimate 15000 PRO3 Voltage: 400V Cooling capacity: 15000W Water consumption: 5,0-9,0 L/min*** Power consumption: 3100W Phase: 3* Connection: 3-phase D25 4,0mm2 cable (the compressor of this unit is divided across 3 phases) Heating elements: 3x2700W Dehumidification capacity: 270 L/24h** Dimensions: 121x70x54 Weight: 160 kg * For two-phase and three-phase connections, one heating element is connected to each phase. ** At 80% humidity and 30°C ambient temperature. *** At cooling-water temperatures from 6°C to 20°C.

Connect your air ducts easily to your OptiClimate with this plenum box!

 

The OptiClimate plenum box has a durable insulated housing and is fitted to the rear of your OptiClimate 6000 PRO3 climate system. It allows you to place the OptiClimate outside the grow room. If connected to a 3-way non-return valve*, you can use your OptiClimate in two separate rooms.

 

• allows the OptiClimate climate system to be installed outside the grow room
• can be used to divide one OptiClimate climate system between two separate rooms
• compatible with OptiClimate 6000 PRO3
• four perforated openings for easy air-duct attachment
• dimensions: 48 x 40cm
• opening diameter: ⌀ 250mm

Connect ducts easily to your OptiClimate with this plenum box!

 

The OptiClimate plenum box has a sturdy insulated casing and is fitted to the rear of your OptiClimate 3500 PRO3 climate system. It allows you to install OptiClimate outside the grow room. If you connect it to a 3-way non-return valve*, you can use your OptiClimate in two separate rooms.

 

• allows the OptiClimate climate system to be installed outside the grow room
• can be used to divide one OptiClimate climate system between two separate rooms
• compatible with OptiClimate 3500 PRO3
• four perforated openings for easy duct attachment
• dimensions: 60 x 50cm
• opening diameter: ⌀ 250mm

Set of carbon filters for the water-cooled air conditioner OptiClimate 3500 PRO 3. The carbon filters remove odours and mould spores from the air. The set contains three filters (a 12-week set). We recommend replacing the filter every 4 weeks.

 

• 3 pcs. carbon filters for OptiClimate 3500 PRO 3
• dimensions: 48 x 40.5cm

Carbon filter set for water-cooled air conditioner OptiClimate 6000 PRO 3. The carbon filters remove odours and mould spores from the air. The set contains three filters (a 12-week set). We recommend replacing the filter every 4 weeks. 

 

• 3 pcs carbon filters for OptiClimate 6000 PRO 3
• dimensions: 59.7 x 49cm

OptiClimate 3500 PRO3 is a water-cooled air conditioner that cools the air using water and heats it with ceramic heaters. It is a self-contained climate-control system that perfectly controls the indoor climate while consuming the least possible energy. OptiClimate has a water inlet and outlet. The inlet is connected to the water supply. Cold water is used to cool the air, causing the water temperature to rise from 35°C to 50°C. This hot water is then discharged through the water outlet or recycled.

 

• functions for: cooling, heating, dehumidifying (dehumidifier), air circulation and air filtration .
• power consumption at 230V: 740W
• cooling capacity: 3.5kW (for 6 x 600 HPS)
• dehumidifies: 55L (per 24 h)
• water consumption: 1-2L/min
• 2 x 1500W ceramic heaters
• flange diameter: ⌀ 250mm (1 pc included)
• dimensions: 100 x 50 x 42cm
• weight: 57kg
• warranty: 1 year

Why choose OPTICLIMATE?

 

 

This is ideal for cooling properties near water sources, such as canal houses, houseboats, yachts, swimming pools or greenhouses. The water-cooled OptiClimate is perfect for use in historic buildings, where an outdoor unit cannot be installed. If your house has a swimming pool, you can use the water-cooled OptiClimate to cool your house and heat the pool.

 

• PRO3 comes with an included remote control (controller), which allows all processes to run fully automatically and be monitored at the same time. Once the minimum temperature (night mode) and maximum temperature (day mode) have been set using the remote control, OptiClimate will heat or cool according to the night or day setting, ensuring that the preset temperatures are not exceeded. The night or day setting is controlled by a light sensor. In the day setting (cooling), OptiClimate also dries the air. If necessary, using the included hydrostat, OptiClimate can also dry the air in the night setting, thereby reducing humidity.

• OptiClimate dries the air by continually finding the right balance between heating and cooling. This allows the dehumidification function to operate even after the desired temperature has been reached. OptiClimate's dehumidification capacity is more than sufficient for most applications. It is one and a half to two times more effective than a construction dehumidifier.

 

SAFE AND SECURE CLIMATE CONTROL! 

1. The built-in temperature safety switch ensures that the lights switch off if the set maximum temperature is exceeded, for example when the water supply is disrupted.
2. OptiClimate is fire-safe because all electrical components, including the heating and connections, are installed in a steel enclosure.
3. OptiClimate has an alarm output that can be used to send an SMS alert in the event of a malfunction.

Instructions for use in English: here*

Plenum box suitable for OptiClimate PRO 3 or PRO 4. OptiClimate Plenumbox 10000 for PRO3 or PRO4 model. The Plenumbox is an insulated box that can be installed at the rear of the OptiClimate 10000 PRO3 and PRO4. With the distribution box, it is possible to place the OptiClimate outside the room or use the Dual Room System with a three-way valve. The distribution box is supplied with four perforated openings that can be used to secure the air hose. Suitable for: OptiClimate 10000 PRO3 and PRO4 Dimensions: 688 x 497 mm Flange: 355 mm Especially for: When the OptiClimate is placed outside the room

OptiClimate 6000 PRO3 is a water-cooled air conditioner that cools the air using water and heats it using ceramic heaters. This is a self-contained climate system that perfectly controls the indoor climate, using the least possible energy. OptiClimate has a water inlet and outlet. The inlet is connected to the water supply. Cold water is used to cool the air, which raises the water temperature from 35°C to 50°C. This hot water is then discharged through the water outlet or recycled.

 

• functions for: cooling, heating, dehumidifying (dehumidifier), circulating and filtering the air.
• power consumption 230-400V: 1450W
• cooling capacity: 6.0kW (for 10 x 600 HPS)
• dehumidifies: 100L (per 24h)
• water consumption: 2-4L/min
• 3 x 1500W ceramic heaters
• flange diameter: ⌀ 250mm (1 pc. included)
• dimensions: 115 x 53 x 43cm
• weight: 80kg
• warranty: 1 year

Why choose OPTICLIMATE?

 

 

This is ideal for cooling properties near water sources such as canal houses, floating houses, yachts, swimming pools or greenhouses. The water-cooled OptiClimate is perfect for historic buildings where an outdoor unit cannot be installed. If your house has a swimming pool, you can use water-cooled OptiClimate to cool your house and heat the pool.

 

• PRO3 comes with an included remote control (controller), which allows all processes to run fully automatically and be monitored at the same time. Once the minimum temperature (night mode) and maximum temperature (day mode) have been set using the remote control, OptiClimate will heat or cool according to the night or day setting, ensuring that the preset temperatures are not exceeded. The night or day setting is controlled by a light sensor. In the day setting (cooling), OptiClimate also dries the air. If necessary, using the included hydrostat, OptiClimate can also dry the air in the night setting, thereby reducing humidity.

• OptiClimate dries the air by continually finding the right balance between heating and cooling. This allows the dehumidification function to operate even after the desired temperature has been reached. OptiClimate's dehumidification capacity is more than sufficient for most applications. It is one and a half to two times more effective than a construction dehumidifier.

 

SAFE AND SECURE CLIMATE CONTROL! 

1. The built-in temperature safety switch ensures that the lights switch off if the set maximum temperature is exceeded, for example when the water supply is disrupted.
2. OptiClimate is fire-safe because all electrical components, including the heating and connections, are installed in a steel enclosure.
3. OptiClimate has an alarm output that can be used to send an SMS alert in the event of a malfunction.

Instructions for use in English: here*

Opticimate 15000 PRO3 is a water-cooled air conditioner that cools air using water and heats it through ceramic heaters. This is a standalone climate-control system that perfectly controls the indoor climate, using the least possible energy. OptiClimate has a water inlet and outlet. The inlet is connected to the water supply. Cold water is used to cool the air, which raises the water temperature from 35°C to 50°C. This hot water is then drained through the water outlet or recycled.

 

 

• functions for: cooling, heating, dehumidifying (dehumidifier), circulating and filtering the air.
• power consumption 400V: 3100W
• phases: 3
• cooling capacity: 15kW
• dehumidifies: 270l (per 24h)
• water consumption: 5-9l/min
• 3 x 2700W ceramic heaters
• dimensions: 121 x 70 x 54cm
• weight: 160kg
• warranty: 1 year

PRO3 comes with an included remote control (controller), which allows all processes to run fully automatically and be monitored simultaneously.

Why choose OPTICLIMATE?

 

 

This is ideal for cooling properties near water sources such as canal houses, floating houses, yachts, swimming pools or greenhouses. The water-cooled OptiClimate is perfect for historic buildings where an outdoor unit cannot be installed. If your house has a swimming pool, you can use water-cooled OptiClimate to cool your house and heat the pool.

 

• PRO3 comes with an included remote control (controller), which allows all processes to run fully automatically and be monitored at the same time. Once the minimum temperature (night mode) and maximum temperature (day mode) have been set using the remote control, OptiClimate will heat or cool according to the night or day setting, ensuring that the preset temperatures are not exceeded. The night or day setting is controlled by a light sensor. In the day setting (cooling), OptiClimate also dries the air. If necessary, using the included hydrostat, OptiClimate can also dry the air in the night setting, thereby reducing humidity.

• OptiClimate dries the air by continually finding the right balance between heating and cooling. This allows the dehumidification function to operate even after the desired temperature has been reached. OptiClimate's dehumidification capacity is more than sufficient for most applications. It is one and a half to two times more effective than a construction dehumidifier.

 

SAFE AND SECURE CLIMATE CONTROL! 

1. The built-in temperature safety switch ensures that the lights switch off if the set maximum temperature is exceeded, for example when the water supply is disrupted.
2. OptiClimate is fire-safe because all electrical components, including the heating and connections, are installed in a steel enclosure.
3. OptiClimate has an alarm output that can be used to send an SMS alert in the event of a malfunction.

Instructions for use in English: here*

OptiClimate 10000 PRO3 is a water-cooled air conditioner that cools the air using water and heats it with ceramic heaters. It is a self-contained climate-control system that perfectly controls the indoor climate while consuming as little energy as possible. OptiClimate has a water inlet and outlet. The inlet is connected to the water supply. Cold water is used to cool the air, raising the water temperature from 35°C to 50°C. This hot water is then discharged through the water outlet or recycled.

 

• functions for: cooling, heating, air drying (dehumidifying), circulation and filtration of the air.
• power consumption 230-400V: 2150W
• cooling capacity: 10kW 
• dehumidifies: 170L (per 24h)
• water consumption: 3-6L/min
• 3 x 2000W ceramic heaters
• dimensions: 115 x 56 x 50cm 
• weight: 120kg
• warranty: 1 year

Why choose OPTICLIMATE?

 

 

This is ideal for cooling properties near water sources such as canal houses, floating houses, yachts, swimming pools or greenhouses. The water-cooled OptiClimate is perfect for historic buildings where an outdoor unit cannot be installed. If your house has a swimming pool, you can use water-cooled OptiClimate to cool your house and heat the pool.

 

• PRO3 comes with an included remote control (controller), which allows all processes to run fully automatically and be monitored at the same time. Once the minimum temperature (night mode) and maximum temperature (day mode) have been set using the remote control, OptiClimate will heat or cool according to the night or day setting, ensuring that the preset temperatures are not exceeded. The night or day setting is controlled by a light sensor. In the day setting (cooling), OptiClimate also dries the air. If necessary, using the included hydrostat, OptiClimate can also dry the air in the night setting, thereby reducing humidity.

• OptiClimate dries the air by continually finding the right balance between heating and cooling. This allows the dehumidification function to operate even after the desired temperature has been reached. OptiClimate's dehumidification capacity is more than sufficient for most applications. It is one and a half to two times more effective than a construction dehumidifier.

 

SAFE AND SECURE CLIMATE CONTROL! 

1. The built-in temperature safety switch ensures that the lights switch off if the set maximum temperature is exceeded, for example when the water supply is disrupted.
2. OptiClimate is fire-safe because all electrical components, including the heating and connections, are installed in a steel enclosure.
3. OptiClimate has an alarm output that can be used to send an SMS alert in the event of a malfunction.

Instructions for use in English: here*