Lighting — Promotions

The Stucco textured reflector is a budget open reflector (natural dissipation of heat from the bulb).

• made from textured polished aluminium
• dimensions L/W/H: 47 x 38 x 11.5cm.
• ceramic socket: E40 (included)
• suitable for: 250W, 400W, 600W MH / HPS bulbs

Metal-halide / MH bulb / lamp for the growth / vegetative phase.

Metal-halide lamp suitable for plants in the vegetative phase. Connects to a 600W ballast.

Improved blue-spectrum output for vigorous growth.

• Socket: E40
• Coverage area: 1.44 m²
• Luminous flux: 51 000 lm
• Luminous efficacy: 85 lm/W
• Lifetime: 10 000 hours
• Colour temperature: 4000 K

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Warning:

• The cable connecting the ballast to the reflector must be no longer than 2m!

LUMii Digita 600W Electronic Ballast is an electronic/digital ballast with the ability to dim (reduce or increase power) 600W high-pressure sodium (HPS) or metal-halide (MH) lamps. LUMii Digita 600W Electronic Ballast is an electronic ballast with an integrated microprocessor that controls and operates at a higher frequency than standard analogue ballasts. Higher efficiency means more light for your plants. It enables rapid lamp ignition, saving energy. Quieter than any other ballast. Measurements show up to 30% more brightness than analogue ballasts. The electronic ballast solves irregular mains voltage issues. Analogue ballasts age, become noisy, consume more electricity and get hotter while light output drops. Electronic ballasts do not do this; they maintain the same output and efficiency. For safe operation, the LUMii ballast is programmed to switch off in the event of a short circuit, lamp failure or no lamp fitted.

​

• operating modes with a 600W lamp: 250W, 400W, 600W
• operating modes with a 400W lamp/bulb: 250W, 400W, do not "dim" above 400W!
• operating modes with a 250W lamp/bulb: 250W, do not "dim" above 250W
• Supply voltage: 220–240V 50Hz
• Current: 1.8A
• Input power: 620W
• Output power: 600W
• Power factor: >0.99 THD
• Non-linear distortion: <10%, Imax:Iavg. <1,7
• Ambient temperature: from -25°C to 70°C
• Heating (Δt): 29°C
• Protection class: >IP23
• ​Dimensions L/W/H: 43/38/18.5 cm
• Weight: 3.125 kg

Disconnect the power when changing the lamp!

The LUMii BLACK Reflector includes:

•  5m cable 
•  E40 lamp holder

Dimensions:

• Height: 130mm 
• Width: 380mm
• Length: 510mm

With Easy Rollers you can quickly and easily change the height of your lamps.

• support a load of up to 10 kg

Sylvania GroLux SHP-TS 250W is a dual-spectrum sodium / HPS bulb / lamp, suitable for both the growth / vegetative stage and the flowering stage.

• for growth and flowering
• power: 250W
• current: 2.6A
• luminous flux: 34 000 lm, 75 500 Phyto-lm
• efficacy: 136 lm/W
• colour temperature: 2050 K
• lifespan: 26 000 h.
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 40 cm from plant tops!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

Compact fluorescent lamp (CFL) for flowering, with an integrated electronic ballast (connects directly to the mains with an E40 socket). It does not develop high heat - it can be placed very close to the plants.

• Socket: E40
• Luminous flux: 6300 Lm
• Luminous efficacy: 48 Lm/W
• Lifetime: 10 000 hours
• Colour temperature: 2700 K
• Suitable for supplementary lighting, side lighting, mother plants and clones
• Minimal heat emission

• Do not touch the glass part of the lamp with your hands!
• Do not overtighten in the socket!
• Ensure suitable ventilation!
• Do not use the lamp if it is wet!
• Do not use in dimmable light fixtures!
• Do not use in enclosed light fixtures!

Compact fluorescent lamp (CFL) for flowering, with an integrated electronic ballast (connects directly to the mains with an E40 socket). It does not develop high heat - it can be placed very close to the plants.

• Socket: E40
• Luminous flux: 8050 Lm
• Luminous efficacy: 40 Lm/W
• Lifetime: 10 000 hours
• Colour temperature: 2700 K
• Suitable for supplementary lighting, side lighting, mother plants and clones
• Minimal heat emission

• Do not touch the glass part of the lamp with your hands!
• Do not overtighten in the socket!
• Ensure suitable ventilation!
• Do not use the lamp if it is wet!
• Do not use in dimmable light fixtures!
• Do not use in enclosed light fixtures!

Maxibright Warpdrive 600W Power Pack is a budget electronic ballast designed to operate high-pressure sodium (HPS) or metal-halide (MH) lamps / bulbs rated at 600W. It has no "dimming" capability (reducing or increasing power)!

• operates silently
• extremely lightweight and compact
• works with HPS and MH bulbs

Note: the product is supplied with UK plug* (UK-standard plug) and IEC-14 female connector*!

Features:

• power: 600W
• dimming capability: none
• ​voltage: 240V
• frequency: 50/60Hz
• Imax: 3.5A
• weight: 1.135kg
• dimensions: 241/100/60mm
• warranty: 1 year

Note: the product is supplied with UK plug* (UK-standard plug) and IEC-14 female connector*!

HortiLight Ballast 600W is an excellent addition to any grow room for those seeking a high-quality and reliable magnetic ballast at a reasonable price. It is designed to operate HPS (sodium) and MH (metal-halide) lamps.

• for HPS and MH lamps
• power: 600W
• power consumption: 3A
• voltage: 220/240V, 50Hz
• dimensions L/W/H: 310x144x120mm.
• weight: 6.4kg.

Secret Jardin TLED 26W L54cm Blooming is a single LED bar for the growth and flowering stages of indoor-grown plants. Ideal for additional vertical lighting for the plants in your tent. 

• for growth and flowering
• power: 26W
• efficiency: 2.0µmol/s
• coverage area: 60 x 40cm (when suspended 15cm above the top of the plants)
• protection rating: IP54
• lifespan: + 50 000 hours
• warranty: 1 year
• power cable: yes

Technical specifications:

• for growth and flowering
• power: 26W
• efficiency: 2.0µmol/s
• coverage area: 60 x 40cm (when suspended 15cm above the top of the plants)
• voltage: 100-220V
• frequency: 50/60 Hz
• dimensions: 54 x 4 x 3cm
• weight: 0.36kg
• protection: IP54
• lifespan: + 50 000 hours

• Socket: E40
• Luminous flux: 12 950 Lm
• Efficiency: 43 Lm/W
• Lifetime: 10 000 hours
• Colour temperature: 2700 K
• Suitable for supplementary lighting, side lighting, mother plants and clones
• Minimal heat emission

Compact fluorescent lamp (CFL) for young plants, with an integrated electronic ballast (connects directly to the mains using an E40 socket). It does not develop a high temperature and can be positioned very close to plants.

• Do not touch the glass part of the lamp with your hands!
• Do not overtighten in the socket!
• Ensure suitable ventilation!
• Do not use the lamp if it is wet!
• Do not use in dimmable light fixtures!
• Do not use in enclosed light fixtures!

Mari 600W is a high-quality and durable product – one of the best and best-selling in its class on the market. The lighting kit is designed to work with HPS (sodium) and MH (metal-halide) lamps.

• the kit includes: magnetic ballast, igniter and capacitor
• for HPS and MH lamps
• power: 600W
• power consumption: 6.2A
• voltage: 230V, 50Hz
• dimensions L/W/H: 295x110x115mm
• weight: 6.4kg

Garden Highpro PEARLPRO XL is an adjustable* open reflector made of high-quality pearl aluminium. PEARLPRO XL creates no “hot spots” and distributes light more evenly than other reflectors in this price range. Its greater light spread and intensity provide a larger coverage area. The reflector includes 3 different spreaders for diffusing light, allowing optimisation for the room where it is installed.

• made of high-quality "pearl" aluminium
• safe junction box for concealed wiring
• dimensions at widest setting L/W: 55 x 63cm
• lamp socket: E40 (included)
• suitable for: 250W, 400W, 600W MH / HPS bulbs

CoolTube reflector, Stucco type.

Secret Jardin TLED 26W L54cm Full Spectrom is a single LED bar for the growth and flowering stages of indoor-grown plants. Ideal for additional vertical lighting for plants in your grow tent.

• for growth and flowering
• Power: 42W
• efficiency: 2.0µmol/s
• coverage area: 120 x 60cm (when suspended 15cm above plant tops)
• protection rating: IP54
• lifespan: + 50 000 hours
• warranty: 1 year
• Power cable: yes

Technical specifications:

• for growth and flowering
• Power: 42W
• efficiency: 2.0µmol/s
• Coverage area: 120 x 60cm (when suspended 15cm above the tops of the plants)
• voltage: 100-220V
• frequency: 50/60 Hz
• Dimensions: 95 x 4 x 3cm
• Weight: 0.58kg
• protection rating: IP54
• lifespan: + 50 000 hours

Garden Highpro PEARLPRO is an open reflector with up to 10% greater light distribution than a standard Stucco reflector.

• Made from high-quality "pearl" aluminium
• Safe junction box for concealed wiring
• Dimensions L/W/H: 47 x 47 x 11 cm
• lamp socket: E40 (included)
• Suitable for: 250W, 400W, 600W MH / HPS bulbs

Lumatek HPS Lamp 250W 240V is a pulse-start* high-pressure sodium bulb / lamp, suitable for both growth / vegetative growth and the flowering phase. It is made from durable PCA ceramic, which allows the lamp to operate at higher internal temperatures, increasing output and efficiency. Pulse-start technology enables faster start-up and restart, longer lamp life and improved lumen maintenance.

• for growth and flowering
• power: 250W
• current: 3.0A
• luminous flux: 33 000 lm
• efficacy: 132 lm/W
• PPF: 400 μmol/s
• colour temperature: 2000 K
• lifespan: 28 000 h
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 60 cm away from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

Secret Jardin Cosmorrow LED 20W L50cm Blooming is a single LED bar for the flowering stage of indoor-grown plants. The power supply is not included and is sold separately! You can purchase it here!

• for flowering
• power: 20W
• voltage: 24V
• efficacy: 1.8µmol/s
• light ratio: 33% 2100°K : 33% 6500°K : 34% 660nm
• coverage area: 60 x 40cm (when suspended 15cm above the top of the plants)
• water resistance: IP65
• lifespan: 30 000 hours
• warranty: 1 year

Technical specifications:

• for flowering
• power: 20W
• voltage: 24V
• efficacy: 1.8µmol/s
• light ratio: 33% 2100°K : 33% 6500°K : 34% 660nm
• coverage area: 60 x 40cm (when suspended 15cm above the top of the plants)
• water resistance: IP65
• dimensions: 47 x 3.2 x 1.5cm
• weight: 0.16 kg

Osram Vialox NAV-T (SON-T) 600W is a sodium / HPS bulb / lamp for the flowering stage.

• for flowering
• power: 600W
• current: 6.06A
• luminous flux: 90 000 lm
• efficacy: 150 lm/W
• colour temperature: 2000 K
• life: 20 000 h\n
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 60 cm away from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

Metal-halide / MH bulb / lamp for the growth / vegetative phase.

Metal-halide lamp suitable for plants in the vegetative phase. Connect to a 400W ballast.

Improved blue-spectrum output for vigorous growth.
 

• Socket: E40
• Coverage area: 0.8 m²
• Luminous flux: 38 000 lm
• Efficiency: 95 lm/W
• Lifetime: 10 000 hours
• Colour temperature: 4000 K

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Warning:

• The cable connecting the ballast to the reflector must be no longer than 2m!

LUMii AeroTube 125 mm is the latest air-cooled reflector. When used together with ducting and a fan, this innovative product allows air to flow through the reflector, helping to control the ambient temperature.

• Controls temperature
• Tempered glass
• Removable lamp holder for easy access and lamp cleaning
• External double-sided reflector for superior light output and distribution
• Supplied with a 4 m IEC cable
• Recommended wattage: up to 400W
• ∅ 125 mm.

Mirror Reflector is a budget open reflector, suitable for CFL (fluorescent) bulbs / lamps.

• made of mirror-polished aluminium
• dimensions L/W/H: 47 x 42 x 12cm.
• ceramic socket: E40 (included)
• suitable for: 130W CFL bulbs

Secret Jardin Cosmorrow LED 20W PPE2.4 L50cm Blooming is a single LED bar for the flowering stage of indoor-grown plants. The power supply is not included and is sold separately! You can buy it here!

• for flowering
• power: 20W
• voltage: 24V
• efficiency: 2.4µmol/s
• coverage area: 60 x 40cm (when suspended 15cm above the top of the plants)
• water resistance: IP65
• warranty: 1 year

Technical specifications:

• for flowering
• power: 20W
• voltage: 24V
• current: 0.83A
• efficiency: 2.4µmol/s
• coverage area: 60 x 40cm (when suspended 15cm above the top of the plants)
• water resistance: IP65
• dimensions: 47 x 3.2 x 1.5 cm
• weight: 0.16kg

The AZERWING reflector by Prima Klima with an E40 socket for HPS & MH lamps provides even light distribution without creating so-called "hot spots". The reflector sheet is made of anodised aluminium with 86% light reflectivity after the shaping process.

• Length: 550 mm
• Width: ~500-710 mm
• Height: ~150-200 mm
• Maximum for 1000W
• Weight: 0.90 kg

• 86% reflectivity
• Adjustable lighting angle
• Adjustable lamp tilt
• Even light distribution, without hot spots
• Optimal cooling and flexible connection.

Cooltube is a cooling glass tube designed to provide even lighting for plants without excess heat. It reduces the heat output of the lamp installed inside it by up to 40%. Heat is extracted through a suitable air duct fitted to the tube. 

• Length: 49 cm
• Tube diameter: Ø125 mm
• Suitable for 400W or 600W MH or HPS lamps
• WITHOUT reflector
• Includes an E40 lamp holder
• Materials: glass and aluminium

LUMATEK 600W 240V CONTROLLABLE BALLAST is a digital controllable ballast that can operate with both high-pressure sodium (HPS) and metal-halide (MH) lamps. It provides stable and precise voltage to the lamp, creating higher PAR/PPF output and is nevertheless far more energy efficient than most ballasts on the market! The ballast features intelligent start technology and a soft-dimming mechanism! It can be externally controlled with LUMATEK Control Panel Plus 2.0 (sold separately).

• Output power: 600W
• 4 operating modes: 250W - 400W - 600W - 660W
• generates very little heat compared with other ballasts on the market
• operates silently
• Protection against short circuit, overheating, overvoltage / undervoltage, end of lamp life!
• 5-year warranty!

An electronic ballast is a solution to the problem of irregular voltage in the power grid! Magnetic ballasts age over time, begin to make noise and consume more electricity, heat up more and more while their light output decreases. This does not happen with digital ballasts—they maintain the same level of output and efficiency. LUMATEK ballasts are programmed for “soft start”, meaning no voltage or current peak is required to start the lamp; this extends bulb life, does not overload the electrical installation and allows a larger number of ballasts to start safely at the same time.

Full technical specifications:

• Output power: 600W
• Input voltage: 240V, 50/60Hz
• Maximum current: 2.7A
• power factor*: > 0.99
• Efficiency: 96%
• THD*: < 8%
• Dimming capability / 4 operating modes: 250W - 400W - 600W - 660W
• Compatible with: 250W, 400W, 600W HPS / MH lamps
• Operating frequency: high frequency
• generates very little heat compared with other ballasts on the market
• operates silently
• Protection against short circuit, overheating, overvoltage / undervoltage, end of lamp life!
• Dimensions: 310 x 114 x 81mm
• Weight: 2.7kg
• warranty: 5 years

Operating instructions:

• For use with a 250W HPS or MH lamp: the ballast must be always and only in 250W mode!
• For use with a 400W HPS or MH lamp: the ballast must never be in 600W or 660W mode!
• For use with a 600W HPS or MH lamp: Start in 600W mode and only after the lamp has fully warmed up (after approximately 10min. of operation), can you switch to 660W mode!

1. Disconnect the power when changing the lamp!
2. LUMATEK recommends replacing the lamp after 6-12 months of operation!
3. VERY IMPORTANT: allow the lamp to cool completely (20-30min.) before switching it on again! (Doing otherwise shortens its life.)
4. Also, do not switch the lamp off before it has reached full power!