Hydroponic pumps and compressors

BOYU FP-1500 Submersible Water Pump 1500 L/h is suitable for all hydroponic systems and applications that require nutrient solution to be pumped. The shaft is corrosion-resistant, and all parts are insulated, waterproof and sealed. Thanks to its smart design, the pump is easy to disassemble and clean.

• voltage: 230V, 50/60Hz
• power: 25W
• max. head: 2.5m
• max. flow rate: 1500 L/h
• outlet diameter: ⌀ 13mm
• dimensions: 104 x 93 x 140mm

Choosing a Water Pump

Choose a flow rate that suits the required head, hose length and resistance from the fittings. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

BOYU FP-750 submersible water pump 750 L/h is suitable for all hydroponic systems and those that require nutrient solution to be pumped. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to its intelligent design.

• voltage: 230V, 50/60Hz
• power: 12W
• max. head height: 1.5m
• max. flow rate: 750 L/h
• outlet diameter: ⌀ 13mm
• dimensions: 224 x 139 x 144mm

Choosing a water pump

Match the flow rate to the required head, hose length and resistance from the fittings. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

BOYU FP-1000 submersible water pump 1000L/h is suitable for all hydroponic systems and those requiring nutrient solution pumping. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. The intelligent design makes it easy to disassemble and clean.

• voltage: 230V, 50/60Hz
• power: 16W
• max. head height: 1.8m
• max. flow rate: 1000L/h
• outlet diameter: ⌀ 15mm
• dimensions: 89 x 70 x 111mm

Choosing a water pump

Match the flow rate to the required head, hose length and fitting resistance. The stated maximum flow rate does not apply at the maximum head.

Browse water pumps.

BOYU FP-150 submersible water pump 150 L/h is suitable for all hydroponic systems and those that require nutrient solution to be pumped. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to its clever design.

• voltage: 230V, 50/60Hz
• power: 2.5W
• max. head height: 0.6 m
• max. flow rate: 150 L/h
• outlet diameter: ⌀ 11 mm
• dimensions: 50 x 43 x 48 mm

Choosing a water pump

Choose a flow rate that suits the required head, hose length and resistance from the fittings. The stated maximum flow rate cannot be achieved at the same time as the maximum head.

Browse water pumps.

6-outlet air and water manifold.

Product details

Inlet outer diameter: 9mm 

Outlet outer diameter: 4mm

Connection and aeration

Choose an air hose and diffuser to match the pump outlets. Place the pump above the water level or use a suitable check valve as instructed to limit water backflow.

Browse air pumps.

Air and water manifold with 16 outlets.

Product Details

Outer diameter of inlet: 13mm

Outer diameter of outlets: 6mm

Connection and Aeration

Choose an air hose and diffuser to match the pump outlets. Position the pump above the water level or use a suitable check valve as instructed to limit water backflow.

Browse air pumps.

BOYU FP-100 submersible water pump 120l/h is suitable for all hydroponic systems and systems that require nutrient solutions to be pumped. The shaft is non-corrosive, and all parts are insulated, waterproof, and sealed. Disassembly and cleaning are easy thanks to its smart design.

• voltage: 230V, 50/60Hz
• power: 1.5W
• max. water head: 0.3m
• max. flow rate: 120l/h
• outlet diameter: ⌀ 8mm
• product dimensions: 40 x 36 x 42mm

Choosing a water pump

Match the flow rate to the required head, hose length, and fitting resistance. The stated maximum flow rate does not apply at maximum head.

Browse water pumps.

The BOYU SES-10 air pump is specifically designed for quiet operation. It has an aluminum motor housing, effective heat dissipation, and a long service life. It features high flow and high air pressure.

• voltage: 230V, 50/60Hz
• power: 10W
• pressure: > 0.02Mpa
• flow rate: 10 l/min / 600 l/h
• outlet diameter: ⌀ 8 mm
• dimensions: 187 x 107 x 114 mm

Connection and aeration

Choose an air hose and diffuser to match the pump outlets. Place the pump above the water level or use a suitable check valve as instructed to prevent water from flowing back.

Browse air pumps.

BOYU FP-350 submersible water pump 350 l/h is suitable for all hydroponic systems and those that require nutrient solution to be pumped. The shaft is non-corrosive, and all parts are insulated, waterproof, and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 6W
• max. head height: 0.8 m
• max. flow rate: 350 l/h
• outlet diameter: ⌀ 13 mm
• dimensions: 69x54x82 mm

Choosing a water pump

Match the flow rate to the required head, hose length, and fitting resistance. The specified maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

Wave Maker 3000 from Neptune Hydroponics is a water circulator for mixing nutrient solutions in reservoirs, promoting water oxygenation.

• Power: 6W
• Flow rate: 3000l/h
• Voltage/frequency: 220V-240V/50Hz
• Weight: 0.5kg

Note: This product is specially designed to generate water movement. It is not a filter pump. Please consult your distributor before use.

WARNING: Please make sure all pump parts are in good condition before use. Do not connect it to the power supply if the voltage differs from that specified on the label.

• We recommend keeping the magnets apart before installation. Avoid placing your hands between them due to their strong magnetic force, and remove any metal pieces or other magnets so they are not attracted and to prevent possible injury.
• The strong magnetic force generated by magnets can cause permanent damage to electrical equipment and other items, such as pacemakers, credit cards, keys ... Keep them at a safe distance of at least 30 centimeters.
• Keep away from children and pets!

Choosing a Water Pump

Match the flow rate to the required head, hose length, and fitting resistance. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

BOYU FP-3000 3000 L/h submersible water pump is suitable for all hydroponic systems and those that require nutrient solution to be pumped. The shaft is corrosion-resistant, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 68W
• max. head: 3.5 m
• max. flow rate: 3000 L/h
• outlet diameter: ⌀ 19 mm
• dimensions: 132 x 106 x 172 mm

Choosing a water pump

Match the flow rate to the required head, hose length and fitting resistance. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

BOYU FP-2000 submersible water pump 2000 L/h is suitable for all hydroponic systems and those that require nutrient solution to be pumped. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 43W
• max. head: 3.0m
• max. flow rate: 2000 L/h
• outlet diameter: ⌀ 19mm
• dimensions: 118 x 101 x 158mm

Choosing a water pump

Match the flow rate to the required head, hose length and resistance from the fittings. The stated maximum flow rate does not apply at maximum head.

Browse water pumps.

The air pump BOYU S-1000 is made of high-polymer composite rubber for longer service life and reliability. It features low operating noise, high air capacity and requires no oil lubrication. It also has electronic control of the intake ratio for high efficiency and low power consumption.

• voltage: 230V, 50/60Hz
• power: 3W
• pressure: > 0.014Mpa
• flow rate: 4.2L/min / 252L/h
• outlet diameter: ⌀ 4mm
• weight: 0.5kg
• dimensions: 138 x 80 x 59mm

Connection and aeration

Choose an air hose and diffuser to suit the pump outlets. Place the pump above the water level or use a suitable check valve as directed to limit water backflow.

Browse air pumps.

The air pump BOYU S-2000 is made from high-polymer composite rubber for a longer service life and reliability. It features low operating noise, high air capacity, and requires no oil lubrication. It also has electronic control of the input ratio for high efficiency and low power consumption.

• voltage: 230V, 50/60Hz
• power: 3W
• pressure: > 0.012Mpa
• flow rate: 4L/min / 240L/h
• outlet diameter: 2 x ⌀ 4mm
• weight: 0.82kg
• dimensions: 163 x 105 x 88mm

Connection and aeration

Choose an air hose and diffuser to match the pump outlets. Position the pump above the water level or use a suitable check valve, as instructed, to prevent water from flowing back.

Browse air pumps.

Wave Maker 6000 from Neptune Hydroponics is a water circulator for mixing nutrient solutions in containers, helping to oxygenate the water.

• Power: 12W
• Flow rate: 6000л/ч
• Voltage/frequency: 220V-240V/50Hz
• Weight: 0.5кг

Note: This product is specially designed to generate water movement. It is not a filter pump. Please consult your distributor before using it.

WARNING: Please make sure all pump parts are in good condition before use. Do not plug it into the power supply if the voltage differs from that indicated on the label.

• We recommend keeping the magnets apart before installing them. Avoid placing your hands between them because of their strong magnetism, and remove any metal pieces or other magnets so they are not attracted and cause injury.
• The strong magnetism produced by magnets can cause permanent damage to electrical equipment and other items, such as pacemakers, credit cards, keys ... Keep them at a safe distance of at least 30 centimeters.
• Keep away from children and pets!

Choosing a water pump

Match the flow rate to the required head, hose length, and resistance from the fittings. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

Air and water manifold with 10 outlets.

Product details

Inlet outer diameter - 9 mm

Outlet outer diameter - 4 mm

Connection and aeration

Choose an air hose and diffuser to match the pump outlets. Place the pump above the water level or use a suitable check valve as directed to limit water backflow.

Browse air pumps.

Adjustable, quiet Hailea ACO-9630 air pump with a flow rate of up to 16 L/min (960 L/h) and 8 outlets - ideal for aerating reservoirs, hydroponic systems and aquariums.

Detailed specifications

• Model: ACO-9630 (ACO series)
• Maximum flow rate: 16 L/min (960 L/h)
• Power consumption: 15 W
• Noise level: < 45 dB
• Head / maximum pressure: ~ 1,5 m (~0.015 MPa)
• Temperature/voltage range: 110-120 V / 220-240 V, 50/60 Hz (universal power supply)
• Weight: ~ 2,7 kg
• Dimensions (length × width × height): 248 × 176 × 137 mm
• Design features:
    • 8 outlets with metal fittings
    • Adjustable flow - allows smooth adjustment of the volumetric airflow
    • Oil-free device - clean air without contamination
    • Multi-layer sound insulation and cushioning feet for minimal vibration and noise

Usage recommendations

• Place the pump on a stable, level surface, with vibration-absorbing materials (rubber feet) to minimize noise.
• Connect each of the 8 outlets using flexible tubing (typically Ø 4 mm) - use all of them or only as many as needed.
• Adjust the flow according to the volume of the system or reservoir - for smaller reservoirs, you can reduce it to a low flow rate.
• Keep the intake filters clean and dust-free to avoid reduced output.
• Make sure the pump is positioned above the water level or fitted with a backflow prevention device so it does not draw water back in if power is interrupted.

Benefits

The Hailea ACO-9630 air pump combines power and flexibility: with a flow rate of up to 16 L/min and 8 independent outlets, it is suitable for large and multi-point systems. Its low power consumption (15 W), adjustability, and quiet operation make it an excellent choice for aerating reservoirs, hydroponic systems, aquariums, and other installations requiring a reliable oxygen flow.

Connection and aeration

Choose an air hose and diffuser according to the pump outlets. Place the pump above the water level or use a suitable check valve as instructed to limit water backflow.

Browse air pumps.

The BOYU SES-20 air pump is specifically designed for quiet operation. It has an aluminum motor housing, good heat dissipation and a long service life. It features high flow rate and high air pressure.  

• voltage: 230V, 50/60Hz
• power: 15W
• pressure: > 0.02Mpa
• flow rate: 20L/min / 1200L/h
• outlet diameter: ⌀ 8mm
• dimensions: 224 x 139 x 144mm

Connection and aeration

Choose an air hose and diffuser to suit the pump outlets. Place the pump above the water level or use a suitable check valve as directed to prevent water from flowing back.

Browse air pumps.

The air pump BOYU S-4000 is made of high-polymer composite rubber for longer service life and reliability. It features low operating noise, high air capacity and requires no oil lubrication. It also has electronic control of the intake ratio for high efficiency and low power consumption.

• voltage: 230, 50/60Hz
• power: 9W
• pressure: > 0.012Mpa
• flow rate: 3.2L/min 768L/h
• outlet diameter: 4 x ⌀ 4mm
• dimensions: 206 x 149 x 96mm

Connection and aeration

Choose an air hose and diffuser to suit the pump outlets. Place the pump above the water level or use a suitable check valve as directed to limit water backflow.

Browse air pumps.

Quiet, energy-efficient air pump Hailea ACO-9601 with a flow rate of up to 3.2 L/min (192 L/h), adjustable airflow, and one outlet — ideal for small aquariums and hydroponic systems.

Detailed specifications:

  Model: ACO-9601 (ACO series) — adjustable airflow model by Hailea.

  Airflow (maximum): 3.2 L/min (≈ 192 L/h).

  Power consumption: 2 W

  Noise level: < 40 dB

  Maximum pressure: > 0.012 MPa

  Power supply / voltage: 110–120 V / 220–240 V, 50/60 Hz

  Number of outlets: 1 outlet (Ø 4 mm)

  Dimensions: 136 × 78 × 68 mm

  Weight: ~ 0.40 kg

Design and additional features:

  • Oil-free design for clean air
  • Multilayer noise insulation.
  • Airflow regulator for precise flow adjustment.
  • Rubber feet to reduce vibration.

Usage recommendations:

• Place the pump above the water level to prevent back-siphoning.
• Connect the outlet to a suitable Ø 4 mm hose and distribute the air using air stones.
• Adjust the flow to suit the system's needs using the rotary control.
• Keep the inlet filter clean — dust and dirt can reduce performance.
• Use rubber feet or a stand to reduce noise and vibration.
• Make sure the pump is not submerged — it is designed for air operation, not submersion.

Benefits

Hailea ACO-9601 provides quiet, stable airflow (up to 3.2 L/min) with minimal power consumption (2 W), adjustable flow rate, and a reliable design. With one outlet and multilayer noise insulation, the pump is suitable for compact systems that require clean, precise airflow.

Connection and aeration

Choose an air hose and diffuser to match the pump outlets. Place the pump above the water level or use a suitable check valve as instructed to limit water backflow.

Browse air pumps.

Sicce VOYAGER 4 6000 L/h is a submersible circulation pump that simulates wave motion to increase water circulation in the nutrient reservoir, thereby preventing dissolved nutrients from settling. Thanks to its reliable magnetic support, the pump can be placed anywhere in the reservoir, and its ability to rotate 360° lets you point it in practically any direction you want.

• flow rate: 6000 L/h
• power: 14W
• suitable for tanks with a capacity of: 400-730 L
• quiet
• self-cleaning impeller
• stable magnetic attachment
• wide, moderate flow
• 3-year warranty

User manual: here*

Key features:

• unique two-way rotor for unidirectional startup and quiet operation
• 360° rotation of the base for positioning as needed
• reliable magnetic support and an additional rubber pad to prevent vibrations; tank thickness up to 1.5 cm.
• quiet
• self-cleaning impeller
• stable magnetic attachment
• wide, moderate flow
• flow regulation
• stainless steel shaft
• The pump can be used in liquids or environments with a temperature no higher than 35°C!
• made in Italy
• 3-year warranty

Technical specifications:

• flow rate: 6000 L/h
• power: 14W
• suitable for tanks with a capacity of: 400-730L
• voltage: 230-240V / 50hz

Choosing a water pump

Match the flow rate to the required head, hose length, and fitting resistance. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

The BOYU SES-60 air pump is specially designed for quiet operation. It has an aluminum motor housing, good heat dissipation and a long service life. It features high airflow and high air pressure.  

• voltage: 230V, 50/60Hz
• power: 35W
• pressure: > 0.03Mpa
• flow rate: 60L/min / 3600L/h
• outlet diameter: ⌀ 13mm
• dimensions: 309 x 186 x 210mm

Connection and aeration

Choose an air hose and diffuser to suit the pump outlets. Place the pump above the water level or use a suitable check valve as instructed to prevent water from flowing back.

Browse air pumps.

The BOYU LK-80 air pump is specially designed for quiet operation, like every SES air pump. The only difference is that the LK model has higher airflow and higher air pressure. It features an aluminum motor casing, good heat dissipation, and a long service life.

• voltage: 230V, 50/60Hz
• power: 50W
• pressure: > 0.035Mpa
• flow rate: 80L/min / 4800L/h
• outlet diameter: ⌀ 19mm
• dimensions: 288 x 196 x 193mm

Connection and aeration

Choose an air hose and diffuser to match the pump outlets. Place the pump above the water level or use a suitable check valve according to the instructions to limit water backflow.

Browse air pumps.

The BOYU SES-40 air pump is specially designed for quiet operation. It has an aluminum motor housing, dissipates heat well, and has a long service life. It features high flow and high air pressure.  

• voltage: 230V, 50/60Hz
• power: 30W
• pressure: > 0.03Mpa
• flow rate: 40L/min / 2400L/h
• outlet diameter: ⌀13mm
• dimensions: 275 x 167 x 176mm

Connection and aeration

Choose an air hose and diffuser to match the pump outlets. Place the pump above the water level or use a suitable check valve as instructed to prevent water from flowing back.

Browse air pumps.

Compact and reliable submersible pump, Hailea HX-8810 with a flow rate of ~ 1,050 L/h and good head, suitable for ponds, small fountains, circulation and hydroponic systems.

Detailed specifications

• Model: HX-8810 (HX-8800 series).
• Power: 12 W.
• Power supply: 220-240 V / 50 Hz.
• Flow rate: 1,050 L/h.
• Maximum head (Max jet): 1.4 m.
• Outlet diameter: Ø 20 mm.
• Dimensions: 211 × 102 × 145 mm.

Design features:

• Ceramic (alumina ceramic) shaft—corrosion-resistant.
• Dual water-cooling design for rapid heat dissipation.
• Anticorrosive ABS plastic housing, resistant to alkaline environments.  
• Can be used submerged or out of water.  
• Protective inlet cover/filter to keep out particles.
• Rubber suction-cup feet for securing the pump to surfaces, providing stability and minimizing vibration.
•  

Usage recommendations

• Install the pump on a clean, sturdy surface, using the rubber suction-cup feet to prevent movement and vibration.
• Connect it to a Ø 20 mm hose (or a suitable adapter) to maintain maximum efficiency.
• Keep the inlet filter/cover clean—regular cleaning will prevent buildup from reducing the flow rate.
• Never let the pump run dry—it must be at least partially submerged or supplied with an adequate flow of water.
• If you use the pump out of water, protect it from dust, secure it firmly and ensure adequate cooling/ventilation.
• For long hose runs, check for pressure drops and losses along the way.

Benefits

Hailea HX-8810 is a compact, efficient and versatile pump with a flow rate of ~1,050 L/h and a maximum head of 1.4 m. It combines a sturdy design with a ceramic shaft, ABS housing, dual water cooling and the ability to be used both submerged and out of water. This makes it a suitable choice for a range of water applications—ponds, fountains, circulation and hydroponic systems.

Choosing a water pump

Match the flow rate to the required head, hose length and fitting resistance. The stated maximum flow rate is not the flow rate at maximum head.

Explore water pumps.

BOYU FP-4000 submersible water pump, 4000 L/h is suitable for all hydroponic systems and those that require nutrient solution to be pumped. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to its smart design.

• voltage: 230V 50/60Hz
• power: 75W
• max. head: 3m
• max. flow rate: 4000 L/h
• outlet diameter: ⌀ 19mm
• dimensions: 132 x 106 x 172mm

Choosing a water pump

Match the flow rate to the required head, hose length and fitting resistance. The stated maximum flow rate does not apply at maximum head.

Browse water pumps.

Compact and efficient submersible pump Hailea HX-8830 with a flow rate of 2,900 L/h and a maximum head of ~2.3 m - ideal for ponds, fountains, and circulation. Water pump for installation inside or outside the tank. High-quality ABS plastic housing. Corrosion-resistant ceramic shaft, resistant to all kinds of solutions. Suitable for 200-300L tanks. Flow rate: 2900L/h Water column height: 2.3m Power: 45W Input voltage: 220-240V 50Hz Outlet diameter: 25mm Designed for continuous use. Detachable filter - allows use inside or outside the tank. Dual water-cooled design for rapid heat dissipation. Suitable for all hydroponic needs - pumping, aeration, NFT, filtration. Suction cups for secure attachment inside the tank.

Detailed specifications

• Model: HX-8830
• Power: 45 W
• Flow rate: 2,900 L/h
• Maximum head: approximately 2.3 m
• Outlet / hose diameter: 25 mm (1")
• Dimensions: 157 × 85 × 104 mm
• Weight: ~ 1.18 kg

Construction and features:

• Shaft: ceramic / aluminum-ceramic — corrosion-resistant; suitable for fresh and salt water.  
• Cooling: dual water cooling for rapid heat dissipation.  
• Housing: ABS plastic, resistant to alkalis and corrosion. 
• Sealing and insulation: the motor is sealed with epoxy resin to make the windings waterproof. 
• Mounting: rubber suction feet for securing the pump to surfaces.
• Application: suitable for submersion (in water) or inline use out of water.
• Filter protection: supplied with a cover / filter that fits over the inlet to prevent clogging.

Usage recommendations

• Mount the pump on a sturdy surface, using the rubber suction feet if possible, to reduce vibration.
• Use a suitable Ø 25 mm hose to maintain the specified flow rate and minimize pressure loss.
• Clean the inlet filter / cover regularly to prevent a drop in flow rate due to dirt buildup.
• Do not allow the pump to run dry — it must always be at least partially submerged or in contact with water.
• If using the pump out of water, protect it from dust and ensure it is securely mounted.

Benefits

Hailea HX-8830 is a compact, reliable, and efficient submersible pump with a flow rate of 2,900 L/h and a head of approximately 2.3 m. Featuring a ceramic shaft, ABS housing, and dual water cooling, it offers good corrosion resistance and a long service life. Its ability to operate both underwater and out of water makes it a versatile choice for a range of water applications.

Choosing a water pump

Match the flow rate to the required head, hose length, and fitting resistance. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

The Water Master ACO-002 with 6 outlets (40 L/min) is an air compressor with an advanced compression system and exceptionally quiet operation. It contains special synthetic rubber to keep output and air pressure constant over time. Its small, compact design ensures a long service life with minimal energy consumption. 

• exceptionally quiet
• constant air pressure
• small and compact
• long-lasting use
• energy efficient

Technical specifications:

• voltage: 220V / 50Hz
• power: 35 W
• flow rate: 40 L/min (2400 L/h)
• pressure: 0.03 MPa
• outlets: 6 pcs.
• dimensions: 16.1 x 9.4 x 11.2 cm
• weight: 1.2 kg

Connection and aeration

Choose an air hose and diffuser to match the pump outlets. Position the pump above the water level or use a suitable check valve as instructed to limit water backflow.

Explore air pumps.