ROOT!T

ROOT!T Rooting Gel 150 ml – rooting gel for cuttings

ROOT!T Rooting Gel 150 ml is a rooting gel suitable for use with ornamental plants, softwood and hardwood plants, and leaf and root cuttings. This gel adheres tightly to the cutting stem, and the convenient bottle tip allows it to be applied directly to the rooting medium (rockwool plugs, peat plugs, coconut fiber, compost, or soil). For best results, we recommend using it together with ROOT!T Natural Rooting Sponges 50 pcs.

• Roots in 3-4 days without stress or wilting, with a good root system developing from the very first day!
• Convenient bottle with a cap, so you don't have to pour it into other containers.
• Hormone-free!
• Contains vitamin B1, which helps the root system grow faster.
• "Seals" the cutting, forming a protective coating over the cut surface, thereby preventing infections and dehydration.

Instructions for use:

• Always usesterile tools when taking cuttings!
• Pour about 1 ml of the gel directly into the hole for the cutting to make sure the gel doesn't get "wiped off" when inserting the cutting!
• Make sure the cuttings are placed in the gel and rooting medium immediately to prevent wilting and retain the flow of auxins (growth hormones) moving down the stem to initiate root growth. rooting gel for cuttings!

ROOT!T Value – 24-cell tray kit

ROOT!T VALUE Rooting Sponge Propagation Kit is a complete kit for germinating seeds or rooting cuttings. The kit contains:

• propagator with a humidity control vent
• 24-cell tray
• 24 pcs. rooting sponges
• 15 ml sample of initial feed
• 15 ml sample of rooting gel
• instructions in English for optimal results
• dimensions L/W/H: 38 x 24 x 18.5 cm

ROOT!T – 60-cell seedling tray

ROOT!T Propagator Tray Insert is a 60-cell tray for rooting sponges, suitable for use in the ROOT!T propagator.

• 60 cells
• dimensions: 52x32x5cm

ROOT!T Cutting Mist 100 ml – cutting spray

ROOT!T Cutting Mist 100ml is a cutting spray that prevents losses during the critical first few days, when cuttings are most vulnerable. Ideal for plants with soft and semi-hard wood. You can treat the mother plant (from which you will take cuttings) with this spray 2-3 days in advance, as well as the cuttings themselves during the first three days after cutting them!

• improves rooting
• revives drooping, stressed cuttings and brings them back to life
• contains essential vitamin and mineral blends
• prevents cuttings from dehydrating
• can be used with ROOT!T Rooting Gel 150ml rooting gel or on its own

Directions for use:

• Spray the plant you will take cuttings from 2-3 days in advance!
• Spray the cuttings during the first 3 days after cutting them!

ROOT!T – propagator tray 57×37 cm

ROOTiT Propagator Tray is a tray / base for the ROOT!T propagator.

• equipped with longitudinal channels to prevent overwatering
• dimensions: 57x37x5.5cm.

ROOT!T – heat mat thermostat

ROOT!T Thermostat for Heat Mat is an electronic device that gives you full control over the temperature in the root zone during germination / rooting. By switching the heating mats on and off, the device maintains the set desired temperature precisely (10-30ºC). Compatible with all ROOT!T heating mats.

• Maintain the optimal temperatures for your plants!
• Easy to switch on!
• Easy to use and control!
• sensor cable length: 1.8m.
• max. load: 1000W / 4.3A

Preparing for operation:

1. Place the temperature sensor in the propagator or the area to be heated. It can be hung using the rubber suction cup or placed in the substrate (photo 3).
2. Place the thermostat outside the propagator or growing area - the thermostat and output socket must always be kept in a dry place! DO NOT IMMERSE IN WATER OR LIQUIDS!
3. Plug the heating mat or other heater into the output socket.
4. Connect the thermostat to the power supply - the POWER indicator should light up.
5. Continue to set the desired temperature to maintain.

Setting the thermostat:

The display shows the current temperature at the sensor. Press UP to display degrees Fahrenheit ºF or DOWN to display Celsius ºC - the corresponding indicator will light up.

1. Press the SET button to display the desired temperature; after 3 seconds, it will return to the current temperature.
2. Press and hold the SET button for 3 seconds; the display will start flashing - press UP or DOWN to select the desired temperature to maintain.
3. Press SET again to return to displaying the current temperature. Leave it, and it will return to displaying the current temperature after 30 seconds.

The HEATING indicator will light up if the current temperature is lower than the desired temperature - the heating mat / heater is now operating ON. The HEATING indicator will not light up if the current temperature is higher than the desired temperature - the heating mat / heater is not operating now OFF.

ROOT!T 40×60 cm - heating mat

ROOT!T Medium Heat Mat is a heating mat that evenly warms the root zone, improving germination and rooting. Maintaining a constant temperature is key to success in the early stages, when young plants are at their most delicate and vulnerable. 

• Dimensions W/D: 40x60cm.
• Speeds up seed germination or clone rooting by whole days.
• Warms the root zone by 5.5-11˚C above the ambient temperature.
• Fully waterproof, scratch-resistant, and durable.
• To set your desired precise temperature, use together with the ROOT!T thermostat for heating mats.

Instructions for use:

1. Place the heating mat on a thoroughly dried surface.
2. For best results, place the mat on an insulated surface, not directly on a cold floor.
3. Place the tray with seedlings (seeds, clones) on the mat. Cover it with a propagator lid - this will keep the root zone warm and maintain humidity for better rooting.
4. Connect to the mains (220-240V).
5. This heating mat is designed to warm the root zone by 5.5-11˚C above the ambient temperature.

Caution:

• Improper use may result in fire or electric shock!
• Make sure there are no sharp objects on the surface beneath the heating mat that could puncture it! Do not place the mat directly in the tray / propagator, and do not cover it with soil or other growing medium!
• Do not cover the mat with heat-insulating materials, as this may cause overheating!
• Do not immerse in water!

ROOT!T – propagator lid 57×37 cm

ROOTiT Propagator Lid is a lid for the ROOT!T propagator.

• two vents for humidity control
• dimensions: 57x37x15.5cm.

ROOT!T 40×120 cm – heat mat

ROOT!T Large Heat Mat is a heating mat that evenly warms the root zone, improving germination and rooting. Maintaining a constant temperature is a key factor for success in the early stages, when young plants are at their most delicate and vulnerable. 

• Dimensions W/L: 40x120cm.
• Speeds up seed germination or cloning rooting by whole days.
• Warms the root zone by 5.5-11˚C above the ambient temperature.
• Fully waterproof, scratch-resistant and durable.
• To set your desired precise temperature, use together with the ROOT!T thermostat for heat mats.

Instructions for use:

1. Place the heating mat on a thoroughly dry surface.
2. For best results, place the mat on an insulated surface rather than directly on a cold floor.
3. Place the tray of seedlings (seeds, clones) on the mat. Cover it with a propagator lid - this will keep the root zone warm and maintain humidity for better rooting.
4. Connect to the power supply (220-240V).
5. This heating mat is designed to warm the root zone by 5.5-11˚C above the ambient temperature.

Warning:

• Improper use may result in fire or electric shock!
• Make sure there are no sharp objects on the surface beneath the heating mat that could puncture it! Do not place the mat directly inside the tray / propagator or cover it with soil or other growing medium!
• Do not cover the mat with heat-insulating materials, as this may cause overheating!
• Do not immerse in water!

ROOT!T 25×35 cm – heating mat

ROOT!T Small Heat Mat is a heating mat that evenly warms the root zone, improving germination and rooting. Maintaining a constant temperature is key to success in the early stages, when young plants are at their most fragile and vulnerable.

• Dimensions W/L: 25x35cm.
• Speeds up seed germination or rooting of cuttings by whole days.
• Warms the root zone to 5.5-11˚C above the ambient temperature.
• Completely waterproof, scratch-resistant, long-lasting.
• To set your desired precise temperature, use it together with the ROOT!T heating mat thermostat.

Instructions for use:

1. Place the heating mat on a thoroughly dried surface.
2. For best results, place the mat on an insulated surface, not directly on a cold floor.
3. Place the tray with seedlings (seeds, cuttings) on the mat. Cover it with a propagator lid - this will keep the root zone warm and maintain humidity for better rooting.
4. Connect to the power supply (220-240V).
5. This heating mat is designed to warm the root zone to 5.5-11˚C above the ambient temperature.

Caution:

• Incorrect use may result in fire or electric shock!
• Make sure there are no sharp objects on the surface beneath the heating mat that could puncture it! Do not place the mat directly in the tray/propagator or cover it with soil or other growing media!
• Do not cover the mat with insulating materials, as this may cause overheating!
• Do not immerse in water!

ROOT!T – 60 rooting cubes

ROOT!T rooting plugs / blocks for seedlings are designed for seed germination, rooting cuttings / clones or seedlings, and are the ideal addition to any standard-size propagator. The dry plugs can be stored for a long time without worrying about mold developing. Before use, hydrate them by soaking them in a solution of ROOT!T First Feed. After letting them drain, the now-moist plugs are ready to use!

• peat-free
• for seed germination, rooting cuttings / clones or seedlings
• made from natural coconut fibers
• biodegradable
• ​lightweight, easy to store and transport
• number of plugs: 60 plugs
• dimensions: ⌀ 32 x 38 mm

ROOT!T Dry Peat Free - 24-cell kit

Kit for germinating seeds and rooting cuttings. Includes a rigid plastic propagator and a tray with 24 peat-free cubes. The clear lid has an adjustable ventilation opening. Propagator dimensions: 37.5 × 23 × 18 cm.

ROOT!T – tray with 24 seedling cubes

ROOT!T rooting and seedling plugs / blocks are designed for seed germination, rooting cuttings / clones or seedlings and are the ideal addition to any standard-size propagator. The dry plugs can be stored for a long time without worrying about mold developing. Before use, to hydrate them, soak them in a solution of ROOT!T First Feed. Once you have left them to drain, the moistened plugs are ready to use!

• peat-free
• for seed germination, rooting cuttings / clones or seedlings
• made from natural coconut fibers
• biodegradable
• lightweight, easy to store and transport
• durable, reusable polystyrene tray, suitable for any standard propagator
• number of plugs: 24 plugs
• plug dimensions: ⌀ 32 mm x 38 mm high
• tray dimensions: 29.5 x 19 x 4 cm

ROOT!T Dry Peat Free 60 – Germination Kit

A kit with a mini greenhouse and tray containing 60 peat-free germination cubes for starting seeds and rooting cuttings. The transparent lid has ventilation openings. The tray and propagator can be reused; new cubes are needed for each new sowing.

ROOT!T 25×35 cm – Insulating MatInsulated mat measuring 350 mm x 250 mm. This mat is placed under a heated propagator mat. It ensures that all the heat produced is directed upwards to the propagator and is not lost.

ROOT!T Dry Peat Free 60 Cell Filled Tray is a professional plant propagation tray containing 60 dry peat-replacement cubes made from natural coconut fibers and polymer. It is suitable for both seed germination and rooting cuttings. The cubes are lightweight, resistant to mold growth during storage and, once moistened, provide an ideal environment for developing a strong root system.

ROOT!T Dry Peat Free 60 Cell Filled Tray is designed for gardeners and professional growers looking for an eco-friendly alternative to traditional peat pellets. The pack includes 60 dry cubes, which are activated by soaking in water or nutrient solution and are ready to use once fully hydrated.

The cubes are made from coconut fibers and a natural polymer, giving them an excellent balance between moisture retention and oxygen access for young roots. Thanks to the octagonal cells in the tray, a small air gap forms around each cube, encouraging natural air pruning of the roots. This results in a denser, healthier root system and significantly faster establishment after transplanting.

Each cube has a specially shaped two-level hole. The wider top section is designed for seeds, while the narrower, deeper bottom section is ideal for placing cuttings treated with ROOT!T Rooting Gel. This makes the product versatile for both seed starting and plant cloning.

After transplanting, the cubes naturally break down in the growing medium without hindering root development. The polystyrene tray itself is extremely durable and can be reused with new ROOT!T Dry Peat Free Refill cubes.

Technical specifications

✔️ Manufacturer: ROOT!T

✔️ Type: Germination and rooting tray

✔️ Number of cells: 60

✔️ Number of cubes: 60 pcs.

✔️ Cube material: Coconut fibers and natural polymer

✔️ Tray material: Polystyrene

✔️ Cube size: Ø32 × 38 mm

✔️ Tray size: 52 × 30 × 4 cm

✔️ Peat-free

✔️ Biodegradable cubes

✔️ Suitable for repeated use (tray)

📦 The set includes

✔️ 1 × Tray with 60 cells

✔️ 60 × ROOT!T Dry Peat Free cubes for germination and rooting.

🔧 Applications

Suitable for:

• Germinating seeds

• Rooting cuttings

• Vegetable seedlings

• Flowers

• Herbs

• Hot peppers

• Tomatoes

• Microgreens

• Home and professional greenhouses

• Mini greenhouses and propagators.

📋 Instructions for use

1. Place the tray in a mini greenhouse or suitable container.
2. Moisten the cubes with water or a ROOT!T First Feed solution (5 ml per 1 litre of water) and leave them to fully hydrate, preferably overnight.
3. For seeds – place the seed in the top hole and lightly cover it with a small amount of material from the cube.
4. For cuttings – add ROOT!T Rooting Gel to the hole and place the cutting in the deeper section.
5. Maintain a temperature of 18–22°C for seeds or around 22°C for cuttings, along with high humidity in the mini greenhouse.
6. Once a well-developed root system has formed, transplant the cubes directly into a pot or growing medium.

💡 Tip from Urban Botaniks: For maximum germination rates, use the tray with ROOT!T First Feed, ROOT!T Rooting Gel and a heated ROOT!T propagator. This provides optimal moisture, temperature and nutrients for rapid germination and strong rooting.