Lighting

Agrolite 4.30 LED is an innovative lighting product with four adjustable panels of 30W each, reaching a total output of 120W. The lamp's geometry, high efficiency and low heat output make it the ideal lighting fixture for the germination, growth and flowering stages.

• intended use: for growth and flowering
• power: 120W
• efficiency: 2.2 µmol/J
• service life: 20 000 hours
• socket: E27

Note: the lamp is sold without a lamp holder!

A lamp holder can be purchased here!

Warning: do not use with dimmers!

Technical specifications:

Rope Ratchet is a reflector suspension system. It allows quick and easy adjustment of lamp height.

 

• supports a weight of up to 68kg.
• when pulled tight, the Rope Ratchet ropes lock in one place; they cannot slip, and the housing cannot break or rust—it is made of a special composite material
• heat- and cold-resistant
• the set includes 2 pcs. 1.6m polypropylene ropes
• the set includes 4 pcs. carabiners

Diamond Lightite diamond reflective film has a raised diamond diffusion structure to distribute light more evenly over the plant canopy. It also provides maximum reflection of light lumens. With a PET coated membrane to greatly increase strength and reduce the chance of creasing.

• Width: 1.25m
• Thickness: 125μm

• Premium film
• 5-layer
• Diamond-pattern embossing for light diffusion
• 100% lightproof

? Solux i-Clone 2x20W LED Tube is high-quality lighting designed for optimal illumination of rooting cuttings and maintaining mother plants. With full-spectrum lighting and the option to connect up to 10 tubes in series, this product offers flexibility and efficiency for every indoor garden.

? Detailed specifications:

• Manufacturer: Solux
• Model: i-Clone 2x20W LED Tube
• Lighting type: LED tube with two 20W LEDs
• Colour temperature: 6500K (suitable for vegetative growth and flowering)
• Luminous efficacy: 2.4 μmol/s per watt
• Product lifespan: 55,000 hours
• Dimensions: 120 cm length
• Weight: 330 g
• IP rating: IP65 (dust- and moisture-resistant)
• Connection: Connect up to 10 tubes in series via IP65 input/output connectors
• Package contents: 2 LED tubes, power cable, mounting brackets

 

? Recommendations and directions for use:

1. Choose a suitable location for installing the tubes, ensuring good light distribution.
2. Use the supplied mounting brackets to secure the tubes to a wall or ceiling.
3. Connect the tubes in sequence using the IP65 input/output connectors to link up to 10 tubes in series.
4. Connect the power cable to the first tube and plug it into the mains.
5. Adjust the lighting to suit your plants' needs, ensuring an appropriate photoperiod and light intensity.

 

✅ Benefits of use:

• Improved rooting: Promotes rapid, healthy rooting of cuttings.
• Mother plant maintenance: Provides optimal conditions for keeping mother plants healthy.
• Flexibility: Connect up to 10 tubes in series for easy expansion of the lighting system.
• Energy efficiency: Low energy consumption and a long product lifespan.
• Durability: IP65 protection against dust and moisture, suitable for a range of indoor conditions.

The Stucco textured reflector is a budget open reflector (natural dissipation of heat from the bulb).

 

• made from textured polished aluminium
• dimensions L/W/H: 47 x 38 x 11.5cm.
• ceramic socket: E40 (included)
• suitable for: 250W, 400W, 600W MH / HPS bulbs

LUMii BLACK 600W HPS Lamp is a dual-spectrum sodium / HPS bulb / lamp, suitable for both growth / vegetative growth and the flowering phase.

• for growth and flowering
• power: 600W
• luminous flux: 88 000 lm
• efficiency: 147 lm/W
• colour temperature: 2000 K
• service life: 20 000 h
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Recommendations:

• Connect to the mains using a suitable ballast.
• Place at least 50 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

Sylvania GroLux SHP-TS 600W is a dual-spectrum sodium / HPS bulb / lamp, suitable for both growth / vegetative growth and the flowering stage.

 

• for growth and flowering
• power: 600W
• amperage: 5.5A
• luminous flux: 90 000 lm, 200 000 Phyto-lm
• efficacy: 150 lm/W
• colour temperature: 2050 K
• lifespan: 26 000 h.
• socket: E40

Detailed specifications: here*

 

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 60 cm away from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

 

Warning:

 

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

Universal and easy to install, this lamp holder is ideal for lighting solutions at home and in the office. Compatible with all E27 bulbs. The white E27 lamp holder with cable is the perfect choice for anyone looking for a reliable, stylish lighting solution. With its standard E27 size, it is compatible with a wide range of bulbs while offering easy installation thanks to the included cable. Its elegant white design fits perfectly with different interior styles, and the quality materials ensure durability and reliability. The lamp holder is suitable for both home and office use, offering flexible lighting options.

Light SET 600W HortiLight is a complete lighting kit for indoor growing. The kit consists of:

 

• HotiLight 600W magnetic ballast 1 pc.
• dual-spectrum lamp HortiLight SHP 600W dual 1 pc.
• Stucco reflector 1 pc.

 

 

The E40 lampholder with mounting bracket is an exceptionally practical and reliable product, designed to provide a secure and stable connection between your bulb and the electrical mains. This lampholder is compatible with all types of light sources with an E40 screw base. The E40 lampholder is made from high-quality, durable materials such as ceramic and metal, which withstand high temperatures and provide years of use without wear or deformation. The metal bracket attached to the lampholder enables easy, secure mounting on various surfaces. Using this lampholder with a bracket provides quick and easy connection of your light sources. Thanks to the standard E40 size, it is universal and suitable for many types of lights, including halogen, LED, fluorescent and others. The bracket incorporated into this product's design makes installation easier and provides additional stability, especially in demanding or complex installations. It also allows the lampholder to be mounted vertically or horizontally, providing flexibility and the option to adapt it to your needs and preferences.

Sylvania GroLux SHP-TS 400W is a dual-spectrum sodium / HPS bulb / lamp, suitable for growth / vegetative growth as well as the flowering stage.

• for growth and flowering
• power: 400W
• luminous flux: 58 000 lm, 128 000 Phyto-lm
• efficacy: 145 lm/W
• colour temperature: 2050 K
• lifespan: 26 000 h.
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Place at least 50 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock — disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard — keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns — allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life — indicated by intermittent switching on and off or significant changes in colour or brightness — the lamp must be replaced immediately!

LUMii Digita 600W Electronic Ballast is an electronic/digital ballast with the ability to dim (reduce or increase power) 600W high-pressure sodium (HPS) or metal-halide (MH) lamps. LUMii Digita 600W Electronic Ballast is an electronic ballast with an integrated microprocessor that controls and operates at a higher frequency than standard analogue ballasts. Higher efficiency means more light for your plants. It enables rapid lamp ignition, saving energy. Quieter than any other ballast. Measurements show up to 30% more brightness than analogue ballasts. The electronic ballast solves irregular mains voltage issues. Analogue ballasts age, become noisy, consume more electricity and get hotter while light output drops. Electronic ballasts do not do this; they maintain the same output and efficiency. For safe operation, the LUMii ballast is programmed to switch off in the event of a short circuit, lamp failure or no lamp fitted.

 

​

• operating modes with a 600W lamp: 250W, 400W, 600W
• operating modes with a 400W lamp/bulb: 250W, 400W, do not "dim" above 400W!
• operating modes with a 250W lamp/bulb: 250W, do not "dim" above 250W
• Supply voltage: 220–240V 50Hz
• Current: 1.8A
• Input power: 620W
• Output power: 600W
• Power factor: >0.99 THD
• Non-linear distortion: <10%, Imax:Iavg. <1,7
• Ambient temperature: from -25°C to 70°C
• Heating (Δt): 29°C
• Protection class: >IP23
• ​Dimensions L/W/H: 43/38/18.5 cm
• Weight: 3.125 kg

 

Disconnect the power when changing the lamp!

Secret Jardin Cosmorrow Power 1x20W is a power supply for one 20W LED strip from the Cosmorrow series.

 

• power: 20W
• voltage: 100-220V
• frequency: 50/60 Hz
• weight: 0.35kg
• protection rating: IP54

 

Metal-halide / MH bulb / lamp for the growth / vegetative phase.

Metal-halide lamp suitable for plants in the vegetative phase. Connects to a 600W ballast.

Improved blue-spectrum output for vigorous growth.

• Socket: E40
• Coverage area: 1.44 m²
• Luminous flux: 51 000 lm
• Luminous efficacy: 85 lm/W
• Lifetime: 10 000 hours
• Colour temperature: 4000 K

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Warning:

• The cable connecting the ballast to the reflector must be no longer than 2m!

Secret Jardin Cosmorrow Power 1x40W is a power supply for one 40W LED bar from the Cosmorrow series.

 

• power: 40W
• voltage: 100-220V
• frequency: 50/60 Hz
• weight: 0.70kg
• protection rating: IP54

With Easy Rollers you can quickly and easily change the height of your lamps.

 

• support a load of up to 10 kg

Sylvania GroLux SHP-TS 250W is a dual-spectrum sodium / HPS bulb / lamp, suitable for both the growth / vegetative stage and the flowering stage.

• for growth and flowering
• power: 250W
• current: 2.6A
• luminous flux: 34 000 lm, 75 500 Phyto-lm
• efficacy: 136 lm/W
• colour temperature: 2050 K
• lifespan: 26 000 h.
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 40 cm from plant tops!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

Compact fluorescent lamp (CFL) for flowering, with an integrated electronic ballast (connects directly to the mains with an E40 socket). It does not develop high heat - it can be placed very close to the plants.

 

• Socket: E40
• Luminous flux: 6300 Lm
• Luminous efficacy: 48 Lm/W
• Lifetime: 10 000 hours
• Colour temperature: 2700 K
• Suitable for supplementary lighting, side lighting, mother plants and clones
• Minimal heat emission

• Do not touch the glass part of the lamp with your hands!
• Do not overtighten in the socket!
• Ensure suitable ventilation!
• Do not use the lamp if it is wet!
• Do not use in dimmable light fixtures!
• Do not use in enclosed light fixtures!

The LUMii BLACK Reflector includes:

 

•  5m cable 
•  E40 lamp holder

 

Dimensions:

 

• Height: 130mm 
• Width: 380mm
• Length: 510mm

LUMii BLACK 600W Electronic Ballast is an electronic/digital ballast with "dimming" capability (reducing or increasing power) for 600W high-pressure sodium (HPS) or metal-halide (MH) lamps/bulbs.

 

• 4 operating modes: 250W, 400W, 600W, 600W boost (+10%)
• aluminium housing suitable for wall mounting.
• cable with Schuko plug for connection to the mains
• IEC connector (computer type) for connecting the lamp
• Voltage: 240V
• Current: 2.9A
• Power cable: 2m
• Dimensions L/W/H: 29/12/6cm
• Weight: 3kg
• Warranty: 1 year

 

The electrical fuse is located beneath the power socket — please check the fuse if the ballast is not working!

 

• operating modes with a 600W lamp/bulb: 250W, 400W, 600W, 600W boost (+10%)!
• operating modes with a 400W lamp/bulb: 250W, 400W, do not "dim" above 400W!
• operating modes with a 250W lamp/bulb: 250W, do not "dim" above 250W

 

Disconnect the power when changing the lamp!

Cable with 3 conductors of 1.50 square millimetres, 2 m long, with plug

Garden Highpro PROCUFS is a pair of hanging straps / cuffs, ideal for securing carbon filters, heavy reflectors or any pipes / air ducts.

 

• grip capacity: ⌀ 50 mm
• suspension capacity (total): 84 kg
• 100% galvanised iron

Secret Jardin Cosmorrow LED 20W PPE2.7 L50cm Growing is a single LED bar for the vegetative growth phase of indoor-grown plants. The power supply is not included and is sold separately. You can purchase it here!

 

• for growth
• power: 20W
• voltage: 24V
• efficacy: 2.7 µmol/s
• Colour temperature: 6500K
• coverage area: 60 x 40cm (when suspended 15cm above the top of the plants)
• water resistance: IP65
• warranty: 1 year

Technical specifications:

 

• for growth
• power: 20W
• voltage: 24V
• current: 0.83A
• efficacy: 2.7 µmol/s
• Colour temperature: 6500K
• coverage area: 60 x 40cm (when suspended 15cm above the top of the plants)
• water resistance: IP65
• dimensions: 47 x 3.2 x 1.5cm
• weight: 0.16 kg

Compact fluorescent lamp (CFL) for flowering, with an integrated electronic ballast (connects directly to the mains with an E40 socket). It does not develop high heat - it can be placed very close to the plants.

 

• Socket: E40
• Luminous flux: 8050 Lm
• Luminous efficacy: 40 Lm/W
• Lifetime: 10 000 hours
• Colour temperature: 2700 K
• Suitable for supplementary lighting, side lighting, mother plants and clones
• Minimal heat emission

• Do not touch the glass part of the lamp with your hands!
• Do not overtighten in the socket!
• Ensure suitable ventilation!
• Do not use the lamp if it is wet!
• Do not use in dimmable light fixtures!
• Do not use in enclosed light fixtures!

Double layer Black / white film 85μm 2m / 1m. The price is for 1 linear meter.

 

• thickness: 85μm 
• width: 2m
• length: 1m

LUMii Green LED Head Torch is a head torch with green light, ideal for checking your garden without interrupting the photoperiod (the plants’ dark period).

 

• Three operating modes – full, partial and strobe (flashing light)
• 6 green LEDs
• Operates on 3 AAA batteries (not included)
• Compact and lightweight design

LUMii Black 600W Set  is an indoor lighting set that includes:

 

• bulb / lamp: dual-spectrum LUMii BLACK 600W , 1 pc.
• ballast: digital LUMii BLACK 600W , 1 pc.
• reflector: open Stucco , 1 pc.

 

Attention: the kit does not include a cable from the ballast to the reflector!

LUMii protective glasses for observing under HPS lighting. In addition to protecting your eyes, they make it easier to identify early signs of nutrient deficiencies or pest infestation without having to switch off the lights. LUMii protective glasses have a specially developed blue lens that corrects the orange tint of sodium lamps and creates the impression of natural daylight. This allows you to observe the true colours of your plants—leaves, fruits and flowers.

 

• protect the eyes from ultraviolet (UV) and infrared (IR) rays
• normalise the spectrum

Maxibright Warpdrive 600W Power Pack is a budget electronic ballast designed to operate high-pressure sodium (HPS) or metal-halide (MH) lamps / bulbs rated at 600W. It has no "dimming" capability (reducing or increasing power)!

 

• operates silently
• extremely lightweight and compact
• works with HPS and MH bulbs

 

Note: the product is supplied with UK plug* (UK-standard plug) and IEC-14 female connector*!

Features:

 

• power: 600W
• dimming capability: none
• ​voltage: 240V
• frequency: 50/60Hz
• Imax: 3.5A
• weight: 1.135kg
• dimensions: 241/100/60mm
• warranty: 1 year

 

Note: the product is supplied with UK plug* (UK-standard plug) and IEC-14 female connector*!

HortiLight Ballast 600W is an excellent addition to any grow room for those seeking a high-quality and reliable magnetic ballast at a reasonable price. It is designed to operate HPS (sodium) and MH (metal-halide) lamps.

 

• for HPS and MH lamps
• power: 600W
• power consumption: 3A
• voltage: 220/240V, 50Hz
• dimensions L/W/H: 310x144x120mm.
• weight: 6.4kg.