Hailea HC-250A, water chiller, flow rate 600 to 2200 L/h

Maintaining the nutrient solution temperature in hydroponic systems (NFT and DWC) within optimal limits is essential for preserving oxygen levels and maintaining suitable conditions in the root zone.

With the Hailea HC-250A Chiller 600 - 2200 L/h, controlling the water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• refrigerant R134a
• low noise levels
• easy-to-use digital controller
• automatic overheating shutoff function
• for a tank / aquarium with a capacity of: 250 L

The chiller is designed to work with a water pump with a flow rate of 600 to 2200 L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-250A
• recommended flow rate: 600 - 2200 L/h
• for a tank / aquarium with a capacity of: 250 L
• fittings: 2x ⌀ 25 mm (included)
• power: 1/6 HP
• power consumption: 300 W
• current: 220-240V, 50Hz
• amperage: 1.3A
• dimensions: 448 x 330 x 440 mm
• weight: 18 kg
• warranty: 1 year

Recommendations: The chiller should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Clean according to the unit’s instructions. Make sure to place an air circulation fan near the chiller to prevent heat buildup.

Please note:

1. The flow rate is determined by the pump’s maximum output (submersible pump or other external supply filter) and the circulation equipment.
2. The cooling performance test is shown at an ambient temperature of 30°C, a water temperature before cooling of 28°C, a set temperature of 16°C, and a maximum of 250 liters of water to be cooled. As the amount of water being cooled decreases, the water temperature will drop.
3. Cooling efficiency depends on the installation location, heat source, lighting, pump filter, and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use other alternatives to avoid affecting the unit’s performance.
4. When a room does not have enough air exchange, cooling efficiency decreases if the ambient temperature rises due to heat from the unit.

Cooling sizing

The specified flow rate in L/h is for circulation through the unit. Cooling also depends on the volume, ambient temperature, and heat load. Ensure unobstructed ventilation and a compatible water pump.

Browse water chillers.