1-Component Soil Fertiliser 1 L

Component-1 by House and Garden contains no unnecessary swelling agents, such as those found in solid fertilisers. It contains pure, high-quality nutrients, including EDDHA iron. This allows the plant to absorb nutrients quickly and efficiently during the growth and flowering periods. Preparing the nutrient reservoir: Fill two thirds of the reservoir with water. Add A first and stir well. Add B and stir well. Set the electrical conductivity: start at 1.2 (EC 1.2), then increase it according to the growth schedule until the end of the flowering period; finish at 2.0 (EC 2.0). Add pH- (down) or pH+ (up) to the nutrient solution to maintain a value between 5.7 and 6.7. Top up the reservoir with water. If necessary, use root-growth or flowering stimulators. Your reservoir is ready for the first watering. Water with an electrical conductivity value + Soil A&B with an electrical conductivity value = ready-to-use nutrient solution. Tip: Do not add Soil A and Soil B at the same time. This causes improper feeding, build-up or clogging. Use meters to measure electrical conductivity and pH. For optimum absorption, moisten the substrates thoroughly (+/- 90% moisture) before planting. Fill the cover or reservoir with water containing a light nutrient solution at electrical conductivity 1.2 and leave it for one day. Cut the bottom of the cover or open the plant container so that excess water can drain back into the nutrient reservoir. The substrate is ready for planting. From this point on, keep the substrate slightly dry so the roots can seek out food and water. This will activate the plant. Quantity and available reservoir sizes: Quantity: 1 litre for every 250 litres of ready-to-use nutrient solution; available reservoir sizes: 1,5, and 10 litres.

Component-1 contains no unnecessary swelling agents, such as those found in solid fertilisers. It contains pure, high-quality nutrients, including EDDHA iron. This allows the plant to absorb nutrients quickly and efficiently during the growth and flowering periods. Preparing the nutrient reservoir: Fill two thirds of the reservoir with water. Add A first and stir well. Add B and stir well. Set the electrical conductivity: start at 1.2 (EC 1.2), then increase it according to the growth schedule until the end of the flowering period; finish at 2.0 (EC 2.0). Add pH- (down) or pH+ (up) to the nutrient solution to maintain a value between 5.7 and 6.7. Top up the reservoir with water. If necessary, use root-growth or flowering stimulators. Your reservoir is ready for the first watering. Water with an electrical conductivity value + Soil A&B with an electrical conductivity value = ready-to-use nutrient solution. Tip: Do not add Soil A and Soil B at the same time. This causes improper feeding, build-up or clogging. Use meters to measure electrical conductivity and pH. For optimum absorption, moisten the substrates thoroughly (+/- 90% moisture) before planting. Fill the cover or reservoir with water containing a light nutrient solution at electrical conductivity 1.2 and leave it for one day. Cut the bottom of the cover or open the plant container so that excess water can drain back into the nutrient reservoir. The substrate is ready for planting. From this point on, keep the substrate slightly dry so the roots can seek out food and water. This will activate the plant. Quantity and available reservoir sizes: Quantity: 1 litre for every 250 litres of ready-to-use nutrient solution; available reservoir sizes: 1,5, and 10 litres.