Ventilation and Climate

CAN ISO-MAX 250/1480 is a powerful high-end inline fan. What makes this model unique is that it is a fan built into a silencer. Its metal housing is wrapped in special sound-insulating material, providing high performance and low noise levels. The fan is equipped with a Swiss motor, thermal protection against overheating, speed control and hangers for easier installation.

• metal, sound-insulated housing
• option for speed control
• capacity: 1480 m³/h
• flange: ⌀ 250 mm
• power: 150W
• current: 0.9A
• length: 680 mm
• weight: 9.9 kg

Note: the fan is supplied without a plug!

Full technical specifications: here*

• CAN-MAX fan integrated into a silencer
• quiet and powerful
• easy to install
• metal housing
• special sound-insulating material
• Swiss motor
• thermal protection
• speed control capability
• ​Supplied without a plug!

Falcon 2500 m³/h is a high-efficiency carbon filter designed for professional odour control in ventilation systems with airflow up to 2500 m³/h. It uses high-quality 100% Australian RC412 activated carbon, which effectively absorbs odour-causing molecules, providing clean air and discreet operation in grow rooms. Thanks to its lightweight aluminium construction and high air permeability, the filter combines excellent efficiency with easy installation.

The 250/1100 mm carbon filter is designed for professional air-extraction systems where effective odour control is essential. The interior is filled with activated carbon RC412, produced in Australia and steam-activated at very high temperatures. This type of carbon has high porosity, low density and exceptional absorption capacity, making it one of the most effective materials for air filtration.

Air passes through the thick activated-carbon bed, which traps odour molecules before they reach the extractor and are discharged outside the room. This ensures a constant flow of purified air without unpleasant odours. For maximum efficiency, the filter should be installed before the extractor, so that the entire airflow passes through the carbon.

Falcon uses a high-air-permeability aluminium outer mesh, which combines low weight with excellent mechanical strength. No glues or binding agents are used in production, allowing maximum use of the activated carbon and ensuring better airflow. Each filter is sealed immediately after production to preserve the freshness and effectiveness of the activated carbon until use.

Thanks to its large capacity and airflow of 2500 m³/h, the model is suitable for large grow rooms, professional greenhouses and installations with powerful Ø250 mm extractors, where continuous operation and reliable odour control are required.

Technical specifications

✔️ Manufacturer: Vanguard Hydroponics

✔️ Series: Falcon

✔️ Type: Carbon filter for odour control

✔️ Maximum airflow: 2500 m³/h

✔️ Connection diameter: 250 mm

✔️ Length: 1100 mm

✔️ Activated carbon: RC412 – 100% Australian

✔️ Activation method: Steam activation at high temperature

✔️ Housing material: Aluminium

✔️ High-air-permeability outer mesh

✔️ No glues or binding agents used

✔️ Suitable for continuous operation

✔️ Compatible with Ø250 mm extractors

Benefits

✔️ Effectively eliminates unpleasant odours

✔️ Premium RC412 activated carbon with high absorption capacity

✔️ Excellent airflow with minimal resistance

✔️ Lightweight yet robust aluminium construction

✔️ No glues – maximum use of the filtering material

✔️ Suitable for professional high-airflow installations

✔️ Washable and replaceable pre-filter for a longer service life

✔️ Average service life of over 18 months under normal operating conditions (depending on humidity, dust levels and usage patterns).

📋 Installation and maintenance

• Install the filter before the extractor, so that the entire airflow passes through the activated carbon.
• Use an air duct with a diameter of 250 mm.
• Clean the pre-filter regularly to reduce dust build-up.
• Replace the filter with a new one when filtration efficiency decreases.

💡 Tip from Urban Botaniks: For maximum efficiency, choose a carbon filter with an airflow rating equal to or slightly higher than that of the fan. This ensures optimal filtration, a longer activated-carbon lifespan and better odour control.

CAN 125 BFT 1700m3 250mm is an activated carbon filter for top-class air purification. As part of the CAN-ORIGINALS series, or the "heavy artillery", because it is filled with the thickest, densest layer of heavy carbon, we can confidently say this is the highest-quality and most reliable carbon filter on the market!

• capacity: 1700m³/h
• flange: ⌀ 250mm
• steel housing
• heavy granulated CKV carbon 3-4mm
• activated carbon layer thickness: 6.5cm!
• premium filter with a minimum 30-month lifespan*!
• weight: 61kg

Absorbs odorous and/or hazardous gases—ammonia, formaldehyde, volatile organic compounds (VOC), etc. Catalytically decomposes ozone. Not intended for filtering dust, fine particulate matter or smoke! Installed at the beginning of the air-transfer system (before the fan).

Advantages:

• 6.5cm activated carbon layer!
• The thickest and densest layer of granulated carbon on the market!
• premium filter with a minimum 30-month lifespan*!
• original mesh structure for efficient airflow
• multi-layer pre-filter for better carbon protection
• the most activated carbon per cm² for better adsorption

​*When used in an environment with under 70% relative humidity and temperatures up to 80°C!

​Full technical specifications:

• capacity: 1700m³/h
• steel housing
• flange: ⌀ 250mm
• length: 125cm
• diameter: 40cm
• weight: 61kg
• activated carbon quantity: 41kg
• activated carbon layer thickness: 6.5cm
• type of activated carbon: granulated CKV 3-4mm

Ozone generated by ultraviolet rays safely changes the molecular structure of harmful microorganisms to eliminate odour. Uvonair UV is an economical system that produces ozone using special ultraviolet lamps. Ideal for rooms with a volume of up to 5000-10000 cu.ft. (150-300m3). Fits 8 "(20 cm) air ducts, but can be installed on other duct sizes using adapters. For larger areas, use Uvonair CD models.

Used to connect three air ducts with a female connector.

CAN 375 BFT 1000m3 200mm is a activated-carbon air-purification filter of the highest quality. As part of the CAN-ORIGINALS series, or the "heavy artillery", it is filled with the thickest, densest layer of heavy carbon, so we can confidently say that it is the highest-quality and most reliable carbon filter on the market! 

• capacity: 1000m³/h
• flange: ⌀ 200mm
• steel housing
• heavy granulated CKV carbon 3-4mm
• activated carbon layer thickness: 6.5cm!
• premium filter with a minimum 30-month lifespan*!
• weight: 39kg

Absorbs odorous and/or hazardous gases—ammonia, formaldehyde, volatile organic compounds (VOC), etc. Catalytically decomposes ozone. Not intended for filtering dust, fine particulate matter or smoke! Installed at the beginning of the air-transfer system (before the fan).

Advantages:

• 6.5cm activated carbon layer!
• The thickest and densest layer of granulated carbon on the market!
• premium filter with a minimum 30-month lifespan*!
• original mesh structure for efficient airflow
• multi-layer pre-filter for better carbon protection
• the most activated carbon per cm² for better adsorption

​*When used in an operating environment with below 70% relative humidity and a temperature of up to 80°C!

​Full technical specifications:

• capacity: 1000m³/h
• steel housing
• flange: ⌀ 200mm
• length: 75cm
• diameter: 40cm
• weight: 39kg
• activated-carbon quantity: 25kg
• activated carbon layer thickness: 6.5cm
• type of activated carbon: granulated CKV 3-4mm

FARAN HR-15 is a reliable industrial humidifier for medium-sized spaces measuring 15-30 m². It creates a fine mist and circulates it around the area.

• for nurseries, greenhouses, mushroom farms, animal breeding facilities, warehouses and more.
• Easy to install (connects directly to the tap or a water tank).
• Can be wall-mounted.
• Convenient handle for easy carrying.
• Made from high-quality, durable materials.

• humidification coverage: spaces up to 15-30 m²
• power consumption: 90W
• humidification capacity: 1500 ml / h

Features:

• Suitable for: nurseries, greenhouses, mushroom farms, animal breeding facilities, warehouses and more.
• Easy to install (connects directly to the tap or a water tank).
• Can be wall-mounted.
• Convenient handle for easy carrying.
• Long-lasting, made from high-quality materials.
• Suitable for chemical disinfection and deodorisation.

Technical specifications:

• humidification coverage: spaces up to 15-30 m²
• power supply: 110/220V, 50/60Hz
• power consumption: 90W
• humidification capacity: 1500 ml / h
• dimensions: 310 x 310 x 470 mm

Note:

1. Place it horizontally to control the water level!
2. Make sure the connecting cable is long enough!
3. Check and clean the water tank regularly!
4. If there is no humidification, disconnect the power supply and check the water level!
5. If the water overflows, close the water tap and check the float valve!

Connect ducts easily to your OptiClimate with this plenum box!

The OptiClimate plenum box has a sturdy insulated casing and is fitted to the rear of your OptiClimate 3500 PRO3 climate system. It allows you to install OptiClimate outside the grow room. If you connect it to a 3-way non-return valve*, you can use your OptiClimate in two separate rooms.

• allows the OptiClimate climate system to be installed outside the grow room
• can be used to divide one OptiClimate climate system between two separate rooms
• compatible with OptiClimate 3500 PRO3
• four perforated openings for easy duct attachment
• dimensions: 60 x 50cm
• opening diameter: ⌀ 250mm

Set of carbon filters for the water-cooled air conditioner OptiClimate 3500 PRO 3. The carbon filters remove odours and mould spores from the air. The set contains three filters (a 12-week set). We recommend replacing the filter every 4 weeks.

• 3 pcs. carbon filters for OptiClimate 3500 PRO 3
• dimensions: 48 x 40.5cm

Can Inline 1500 is an inline activated carbon filter for air purification. It can be used as a second filter, providing you with double air filtration! Can Inline is the ideal solution when space is small and limited, leaving no room for your filter - it can be easily and conveniently installed outside the grow room.

• capacity: 1500m³/h
• flange: ⌀ 250mm
• steel housing
• activated carbon layer thickness: 5cm
• can be installed inside and outside the grow room
• intake or exhaust air - 100% filtration in both directions
• minimum 18-month lifespan*

Absorbs odorous and/or hazardous gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Catalytically decomposes ozone. It is not intended for filtering dust, fine particulate matter or smoke! It is recommended to install a dust filter in front of it. Activated carbon bed thickness: 5cm.

Full technical specifications:

• capacity: 1500m3/h
• steel housing
• flange: ⌀ 250mm
• length: 102.5cm
• diameter: 36.5cm
• weight: 24kg
• amount of activated carbon: 7.6kg
• activated carbon layer thickness: 5cm
• activated carbon type: Lite
• minimum 18-month lifespan*

*When used in an environment with relative humidity below 70% and temperatures up to 80°C!

Vents OV1 series axial fans are designed to move large volumes of air at low pressure and can be mounted on a wall or panel. They are used to ventilate commercial, office and other public or industrial premises. The fan features an asynchronous single-phase motor with integrated overheating protection and automatic restart.

• for wall or panel mounting
• with a steel housing and aluminium blades 
• application: combined (extract and supply) ventilation system for various spaces requiring high airflow with relatively low system resistance
• Diameter: ⌀ 162 mm
• max. airflow: 180 m³/h

• Suitable for use in commercial, office and other public or industrial premises.
• Application: combined (extract and supply) ventilation system for various spaces requiring high airflow with relatively low system resistance.
• Motor: the single-phase asynchronous motor is equipped with thermal overheating protection with automatic restart. The motor is equipped with sleeve bearings. Degree of protection of the motor IP44.
• Speed control: step speed control via an external autotransformer (sold separately).
• Mounting: can be wall-mounted or recessed (in-line); (mounting brackets included).
• Power supply: the fan is powered through the remote terminal box. The power supply and installation must be carried out in accordance with the terminal-box manual and wiring diagram.

​Technical specifications:

• phases: 1
• voltage: 230 V
• Frequency: 50 Hz
• power: 26 W
• current: 0.19 A
• max. airflow: 180 m³/h
• speed: 1432 rpm
• noise level at a distance of 3 m: 33 dBA
• min. temperature of processed air: - 30°C
• max. temperature of processed air: + 40°C
• degree of protection: resistant to dust and water splashes (IPX4, IP44)
• blade material: aluminium
• housing material: steel

Fan dimensions (as shown in photo no. 3):

• diameter D: ⌀ 162 mm
• Diameter d: ⌀ 7 mm
• B: 250 mm
• B1: 210 mm
• Length L: 120 mm
• Weight: 2.5 kg

CAN ISO-MAX 355/4800 is a powerful premium inline fan. What makes this model unique is that it is a fan built into a silencer. Its metal housing is wrapped in special sound-insulating material, ensuring high performance and low noise levels. The fan is equipped with a Swiss motor, thermal protection against overheating, speed control and mounting brackets for easier installation.

• sound-insulated metal housing
• option for speed control
• capacity: 4800 m³/h
• flange: ⌀ 355 mm
• power: 868 W
• current: 5.2A
• length: 995mm
• weight: 27kg

Note: the fan is supplied without a plug!

Full technical specifications: here*

• CAN-MAX fan integrated into a silencer
• quiet and powerful
• easy to install
• metal housing
• special sound-insulating material
• Swiss motor
• thermal protection
• speed control capability
• ​Supplied without a plug!

With this air distribution duct, you deliver fresh air and improve the climate in your growing room.

• diameter: ⌀ 125 mm
• length: 10m

Ozone generated through corona discharge safely alters the molecular structure of harmful microorganisms to eliminate odours. Uvonair is a high-output corona-discharge ozone generator that produces more ozone than any other known generators today. It can be adjusted to match the ozone load required for odour control and to save energy by operating at partial load when conditions allow. The corona-discharge generator requires no servicing. The Uvonair CD-1200 ozone generator will treat all odours emitted from a 10" (25cm) ventilation system in almost all circumstances. Designed for rooms up to 20 000 cu.ft. (600 m3). It can also be installed with other duct sizes using adapters. Set the outlet airflow based on practical odour observations
Maintenance-free.
Adapters are not included; use with a ventilation system.
We offer two CD-1000 models:
CD-1000-1 (single cell, 10" diameter)
CD-1000-2 (two cells, 10" diameter)
The Uvonair CD-1000 ozone generator will treat all odours emitted from a 10" (25 centimetre) ventilation system in most circumstances. CD-1000-1 is designed for rooms up to 20,000 cu.ft. (600 m3), while CD-1000-2 is designed for rooms up to 40, 000 cu.ft. (1200 m3). It can also be installed with other duct sizes using adapters.

The VDL 250 ml/day mini dehumidifier is a compact and effective solution for humidity control in small spaces. Designed for rooms such as bedrooms, bathrooms, offices or grow boxes, it maintains optimal humidity and prevents mould and mildew.

The device uses modern thermoelectric Peltier technology, which works without a compressor or chemicals, providing quiet operation and low energy consumption. This makes it ideal for continuous use, including at night or in a work environment.

With a capacity of up to 250 ml per day and a tank of around 900 ml, the dehumidifier offers convenience and minimal maintenance. Thanks to automatic shut-off when the container is full and an LED indicator, it is completely safe and easy to use.

Key features

✔️ Dehumidification capacity: up to 250 ml/24 h
✔️ Tank capacity: ~900 ml
✔️ Technology: Peltier (without a compressor or chemicals)
✔️ Power consumption: approx. 23 W
✔️ Dimensions: approx. 16.5 × 11.5 × 24 cm
✔️ Automatic shut-off when the tank is full
✔️ LED status indicator
✔️ Very quiet operation
✔️ Suitable for small rooms and enclosed spaces

⭐ Benefits

✔️ Effectively removes excess moisture and prevents mould
✔️ Exceptionally quiet – ideal for bedrooms and offices
✔️ Low consumption → economical for long-term use
✔️ Compact and easy to carry
✔️ Safe – automatic shut-off when the tank is full
✔️ Chemical-free → an eco-friendly solution

? Application

The VDL mini dehumidifier is ideal for small spaces, such as wardrobes, bathrooms, bedrooms, offices or storage rooms.

It is particularly suitable for humidity control when growing plants or drying, where a stable environment is essential. It can also be used at home to improve air quality and comfort throughout the year.

The TWE-85L dehumidifier is a professional unit designed for rapid and lasting humidity reduction after construction and renovation work, as well as during recovery from flooding and emergencies. It is suitable for larger spaces where humidity must be maintained below a specified level.

• power: 815W
• up to 85L / 24h dehumidification
• setting from 26 to 90% RH in 1% increments and continuous operation mode
• operating-hour counter (current and total)
• permanent mechanical filter for retaining dust and other contaminants
• option to duct the exhaust air
• built-in 5m drainage hose
• dimensions H x W x D: 83.0 x 51.5 x 53.0cm
• weight: 45.5kg
• warranty: 2 years

Instructions for use: here*

Technical specifications:

• dehumidification capacity: up to 85L
• airflow: 700m³/h
• noise level: up to 58dB
• fan speeds: 1
• tank capacity: with pump-out
• power consumption: 815W
• display: yes
• air filter: washable foam filter
• additional air filter: no
• timer: operating-hours counter
• drain outlet: integrated 5m flexible drain hose
• auto-restart after power failure: yes
• auto-defrost: yes, automatic
• dimensions H x W x D: 83.0 x 51.5 x 53.0cm
• weight: 45.5kg
• refrigerant: R290
• warranty: 2 years

TWE Alpha Q13 Pro Wi-Fi is the brand's latest and most advanced dehumidifier model. It received the award «PLUS X» for 2021 in the «High Quality», «Design» and «Functionality» categories. Thanks to the built-in Wi-Fi module, it can be controlled from a mobile device over the internet. It has an additional three-layer activated carbon filter (included), which absorbs unpleasant odours and traps fine dust particles. The permanent air filter is bactericidal and, together with the additional filter and ioniser, provides comprehensive air purification. An innovative and economical dehumidifier of the latest generation, designed for fast and effective humidity reduction in enclosed spaces. It helps reduce and eliminate moisture condensation on windows, walls, floors and ceilings. It protects clothing, leather goods, books and other sensitive materials from mould and mildew. Suitable for use in homes, offices, storage rooms, medical practices, pharmacies, hairdressing and beauty salons, libraries, sports facilities and fitness centres, garages, attics, basements, pantries, storage areas, schools and nurseries, hotel rooms, banks and more.

1. Fast results.
2. Protection against mould and mildew.
3. Low energy consumption.

• power: 145W
• up to 13 L / 24 h dehumidification
• Wi-Fi control
• system of filters
• ioniser
• laundry drying programme
• dimensions H x W x D: 44.5 x 31.0 x 21.0 cm
• weight: 10.3 kg
• warranty: 2 years

Instructions for use: here* and here*

Advantages:

1. Wi-Fi control. Control it easily and conveniently from a distance with your smartphone – access to the appliance on your home Wi-Fi network is possible from anywhere with an internet connection. At any time, you can monitor the humidity remotely and adjust all functions.
2. Filter system. Feel the difference! The permanent bactericidal filter + the additional three-layer activated carbon filter protect against dust, viruses and bacteria, mould and mildew spores, and unpleasant odours.
3. Ioniser. Negative ions are beneficial to health and improve air cleanliness and quality – breathe easily, as if you were in nature!
4. Laundry drying programme. Dry your laundry with confidence in a convenient place at home; moisture does not stand a chance. Great convenience at the touch of a button.
5. Energy-saving. With its 145W power consumption, it is the most economical dehumidifier for its capacity. It saves money by achieving the desired result quickly through efficient operation.
6. Remarkably quiet. Maximum comfort is achieved with its quiet operating mode, at only 35dB. This contributes to a peaceful environment in any room where the appliance is operating.

Technical specifications:

• served area: up to 60m²
• dehumidification per day: up to 13 L
• airflow: 95m³/h
• noise level: 35dB 
• ioniser
• laundry drying programme
• fan speeds: 2 speeds, quiet and normal
• water protection: IPX4
• tank capacity: 2.3 L
• power consumption: 145W
• display: yes
• air filter: permanent bactericidal mesh filter and additional three-layer activated carbon filter
• timer: 24 h in 1 h increments
• drainage outlet: yes
• auto-restart after power failure: yes
• auto-defrost: yes, automatic
• dimensions H x W x D: 44.5 x 31.0 x 21.0 cm
• weight: 10.3 kg
• refrigerant: R290
• warranty: 2 years

Desert Cyclone dehumidifiers are designed for fast and lasting humidity control in large and industrial spaces. Besides protecting against moisture and mould, these dehumidifiers deliver exceptional performance, energy efficiency and reliable operation.

• suitable for: greenhouses, warehouses and production facilities
• humidity reduction after construction and renovation work
• restoration after floods and emergencies

Instructions for use in English: here*

Technical specifications:

• dehumidification capacity: 90 l/day at an operating environment of 30°C - 80% RH
• power consumption: 1350 W
• current draw: 5.8 A
• hygrostat: digital
• environmentally friendly refrigerant R134a
• airflow: 1300 m³/h
• direct drainage: 1-metre pipe
• power-cord length: 1.8 m
• dimensions: 69.0 x 53.0 x 98.5 cm
• weight: 55 kg

CAN-LITE 1000/250 is an activated-carbon filter for air purification. Thanks to their lightweight carbon, LITE-series carbon filters are more practical and easy to use.

• capacity: 1000m³/h
• flange: ⌀ 250mm
• steel housing
• lightweight CKG 48 carbon
• activated carbon layer thickness: 5cm
• lightweight filter with a minimum 18-month lifespan*
• weight: 11kg

Absorbs odorous and/or hazardous gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Catalytically breaks down ozone. Not intended for filtering dust, fine particulate matter or smoke! It is installed at the beginning of the air transfer system (before the fan).

Advantages:

• easy to operate and install
• original mesh structure for efficient airflow
• multi-layer pre-filter for better carbon protection
• the most activated carbon per cm² for better adsorption

Full technical specifications:

• capacity: 1000m³/h
• steel housing
• Flange: ⌀ 250 mm
• length: 50cm
• diameter: 30cm
• weight: 11kg
• amount of activated carbon: 5.1kg
• activated carbon layer thickness: 5cm
• activated carbon type: Lite CKG 48
• minimum 18-month lifespan*

*When used in a working environment with under 70% relative humidity and temperature up to 80°C!

The VDL Digital CO₂ Controller is a wall-mounted controller designed for precise measurement and automatic regulation of carbon dioxide (CO₂) concentration in enclosed spaces. It uses NDIR sensor technology and an external probe to monitor CO₂, temperature and humidity. Convenient for greenhouses, grow rooms, laboratories and workspaces.

Detailed features

• Measurement technology: NDIR sensor – ensures stability and durability.
• Display: Colour LED or LCD screen with separate zones for CO₂, temperature, humidity, current time and alarms.
• Device control: Built-in relay with plug, allowing external devices (e.g. a CO₂ generator or fan) to be activated/deactivated according to CO₂ levels.
• Intelligent modes:
  • Plant Mode – activates the CO₂ generator at low values.
  • Human Mode – starts ventilation at high CO₂ levels.
• Day/Night sensor: Automatically detects lighting and optimises operation according to day or night mode.
• Alarms: Programmed audible warnings for excessively high CO₂ concentrations.
• Historical data: Recording and graphical display of maximum and minimum values for the past week.
• Measurement range and accuracy:
  • CO₂: 0–9999 ppm
  • Temperature: 0–50 °C
  • Humidity: 5–95 % RH
  • Resolution:
    • CO₂: 1 ppm (0–1000); 5 ppm (1000–2000); 10 ppm (>2000)
    • Temperature: 0.1 °C
    • Humidity: 1 % RH
  • Accuracy:
    • CO₂ < 2000 ppm: ±50 ppm or ±5%
    • CO₂ > 2000 ppm: ±10%
    • Temperature: ±0.6 °C
    • Humidity: ±5 % (25 °C, 10–90 % RH) / ±7 % (other ranges)
• Probe with cable: External probe with a cable about 4.5 m long for flexible positioning in the carbon environment.
• Dimensions and weight:
  • Control panel: approx. 15.6 × 11.6 × 3.9 cm
  • Probe: approx. 11.7 × 3.5 × 2.7 cm
  • Weight: ~750 g
• Operating conditions: 0–50 °C, 5–95 % RH
• Warm-up: Ready for use after about 30 seconds.

Recommendations for use

• Install the wall controller in a convenient place and ensure the probe cable is positioned among the plant canopy for precise measurements.
• Select “Plant Mode” to automate CO₂ supply through a generator. Or select “Human Mode” for safe ventilation when levels are excessive.
• Use the day/night function to optimise resource savings and maintain safe conditions.
• Program alarms for high concentrations and set the desired CO₂ values and hysteresis.
• Monitor weekly minimum and maximum values to analyse and optimise the control process.

Summary – Benefits

• Accuracy and reliability: NDIR technology and high measurement accuracy.
• Integrated control: Controls external devices by CO₂ level for efficient automation.
• Precise monitoring: CO₂, temperature and humidity on one screen.
• Flexibility: Suitable for greenhouses, laboratories, home growing or workrooms.
• Future support: The probe can be replaced for long-term durability.
• Easy to use: Quick setup, calibration and programming.

Low-pressure axial fan from the Vents VKOM series, with a steel housing and the option for recessed / in-line mounting directly in the ventilation system. The fan has an asynchronous single-phase motor with integrated thermal overheating protection with automatic restart.

• for use in commercial, office and other public or industrial premises
• application: combined (extract and supply) ventilation system for various spaces requiring high airflow with relatively low system resistance
• The fan is powered through the remote terminal box. The power supply and installation must be carried out in accordance with the terminal-box manual and wiring diagram.
• diameter: ⌀ 162 mm
• max. airflow: 180 m³/h

• Suitable for use in commercial, office and other public or industrial premises.
• Application: combined (extract and supply) ventilation system for various spaces requiring high airflow with relatively low system resistance.
• Motor: the single-phase asynchronous motor is equipped with thermal overheating protection with automatic restart. The motor is equipped with sleeve bearings. Degree of protection of the motor IP44.
• Speed control: step speed control via an external autotransformer (sold separately).
• Mounting: can be wall-mounted or recessed (in-line); (mounting brackets included).
• Power supply: the fan is powered through the remote terminal box. The power supply and installation must be carried out in accordance with the terminal-box manual and wiring diagram.

Technical specifications:

• phases: 1
• voltage: 230 V
• frequency: 50 Hz
• power: 26 W
• current: 0.19 A
• max. airflow: 180 m³/h
• speed: 1432 rpm
• noise level at a distance of 3 m: 33 dBA
• min. temperature of processed air: - 30°C
• max. temperature of processed air: + 40°C
• degree of protection: resistant to dust and water splashes (IPX4, IP44)
• blade material: aluminium
• housing material: steel

Fan dimensions (as shown in photo no. 3):

• B: 183 mm
• diameter D: ⌀ 162 mm
• length L: 220 mm
• L1: 40 mm
• L3: 30 mm
• weight: 1.8 kg

Dehumidifier TWE-55L is a professional appliance designed for rapid and lasting humidity reduction, for example after construction and renovation work, and during recovery after floods and emergencies. It is suitable for larger spaces where humidity must be kept below a specified level.

• power: 750W
• up to 55l / 24h dehumidification
• setting from 26 to 90% RH in 1% increments and continuous operation mode
• operating-hour counter (current and total)
• permanent mechanical filter for retaining dust and other contaminants
• option to duct the exhaust air
• built-in 5m drainage hose
• dimensions H x W x D: 64.0 x 54.5 x 50.0cm
• weight: 38.0kg
• warranty: 2 years

Technical specifications:

• dehumidification per day: up to 55l
• airflow: 345m³/h
• noise level: up to 58dB
• fan speeds: 1
• tank capacity: with pump-out
• power consumption: 750W
• display: yes
• air filter: yes
• additional air filter: no
• timer: operating-hour records
• drain outlet: built-in flexible drainage hose 5m
• auto-restart after power failure: yes
• auto-defrost: yes, automatic
• dimensions H x W x D: 64.0 x 54.5 x 50.0cm
• weight: 38.0kg
• refrigerant: R290
• warranty: 2 years

Carbon filter set for water-cooled air conditioner OptiClimate 6000 PRO 3. The carbon filters remove odours and mould spores from the air. The set contains three filters (a 12-week set). We recommend replacing the filter every 4 weeks. 

• 3 pcs carbon filters for OptiClimate 6000 PRO 3
• dimensions: 59.7 x 49cm

With this air distribution duct, you deliver fresh air and improve the climate in your growing room.

• diameter: ⌀ 200mm
• length: 5m

Control CO₂ levels in your grow room with the CO₂ Techgrow T-2 Pro 14A kit. The kit includes:

• TechGrow T-2 Pro CO₂ controller 14A 1 pc.
• TechGrow S-4 CO₂ sensor (2000ppm) 1 pc.
• pressure-reducing valve + CO solenoid valve₂ 1pc.

• power supply: 100 - 240V, 50/60Hz
• power consumption: 3W (with sensor, without CO2 source)
• CO₂ setting range: 300 - 2000 ppm

By purchasing this kit, you save 5% compared with buying the products separately!

Instructions for use: here*

Thanks to this unique combination, you can dose CO₂ during the day, while the fan extracts excess CO₂ and the humidity produced by your plants at night. TechGrow Pro CO₂ controller T-2 14A increases ventilation at high temperatures, but this can be overridden by setting a (very) high set temperature. This fully redesigned controller is compatible with many other TechGrow devices. TechGrow Pro CO₂ controller T-2 14A measures, controls and displays CO₂, humidity and temperature values from connected sensors, and records min / max values.

Easy-to-use fan control via the "Box-menu".

Includes quick menus that provide a brief overview of all settings and measurements.

Features:

• all CO₂ settings are the same as those of the TechGrow Pro CO₂ controller T-1
• extraction of excess CO₂ and humidity at night
• unique calibration menu for setting up every box, regardless of size
• LED indicator for CO₂ dosing, light detection and a stable climate
• controls CO₂, temperature and humidity simultaneously
• all settings are retained during power outages
• all setpoint, hysteresis and alarm values are individually adjustable
• quick menu for a quick overview of all settings and measurements
• the fan can be operated automatically or manually
• the fan controller is adjustable in 10% increments
• includes a unique feature allowing the fan to be adjusted in two simple steps
• can be connected to multiple TechGrow devices
• can be connected to the Techgrow Datalogger (DL-1)

CAN 150 BFT 2100m3 250mm is a activated carbon filter of the highest grade for air purification. As part of the CAN-ORIGINALS range, or "the heavy artillery", because it is filled with the thickest and densest layer of heavy carbon, we can confidently say that this is the highest-quality and most reliable carbon filter on the market!

• capacity: 2100m³/h
• flange: ⌀ 250mm
• steel housing
• heavy granulated CKV 3-4mm carbon
• activated carbon layer thickness: 6.5cm!
• premium filter with a minimum 30-month service life*!
• weight: 75kg

Absorbs odorous and/or hazardous gases – ammonia, formaldehyde, volatile organic compounds (VOC), etc. Catalytically breaks down ozone. Not designed for filtering dust, fine particulate matter or smoke! Installed at the start of the air-handling system (before the fan).

Advantages:

• 6.5cm activated carbon layer!
• The thickest and densest layer of granulated carbon on the market!
• premium filter with a minimum 30-month lifespan*!
• original mesh structure for efficient airflow
• multi-layer pre-filter for better carbon protection
• the most activated carbon per cm² for better adsorption

​*When used in an environment with under 70% relative humidity and temperatures up to 80°C!

​Full technical specifications:

• capacity: 2100m³/h
• steel housing
• flange: ⌀ 250mm
• length: 150cm
• diameter: 40cm
• weight: 75kg
• quantity of activated carbon: 50kg
• activated carbon bed thickness: 6.5cm
• activated carbon type: granulated CKV 3-4mm

Can Fan FT 200 Filterbox is a housing for 200 mm diameter bag filters, made of galvanised steel. It is designed for integration with fans and air ducts, providing efficient air filtration in various applications. The housing is designed for easy installation and maintenance, offering strength and durability. 

Detailed features

• Diameter: 200 mm
• Housing material: Galvanised steel
• Closure type: Lever mechanism for easy opening and closing
• Compatibility: Suitable for 200 mm bag filters
• Length: 500 mm
• Application: Industrial and commercial air ducts, ventilation systems.

Recommended use

Use Can Fan FT 200 Filterbox for integration into air ducts and ventilation systems where efficient air filtration is required. It is suitable for applications in industrial and commercial settings where high efficiency and reliability are needed.

Benefits

• Easy installation: Quick and convenient integration into existing systems
• Strength: Made of high-quality galvanised steel for durability
• Versatility: Compatible with various 200 mm diameter bag filters
• Low maintenance: Easy to clean and maintain

Flexible Silencer ⌀ 315mm. for reducing noise levels in ventilation systems. Installed in the exhaust air path (after the fan). Do not bend more than 90°! 

• diameter: 315mm.
• length: 1m.

Can FilterBox ⌀ 200 is a high-quality air filter designed for use in ventilation systems. It is ideal for odour control and improving air quality in various environments, while maintaining optimal conditions for plant growth.