Equipment

🔹 GSE Timer Box IV is a professional lighting and heating controller designed for hydroponic and greenhouse systems. It allows simultaneous control of up to 4 600W lamps and the activation of heating devices with a maximum power of up to 2300W when the lighting is switched off. With a built-in temperature sensor and lamp dimming capability, this controller provides optimal conditions for plant growth.

🔹 Detailed specifications:

• Manufacturer: GSE (G-Systems Engineering)
• Model: Timer Box IV 4x600W + heating + temperature control
• Maximum lighting power: 4x600W
• Maximum heating power: 2300W
• Voltage: 230V / 50Hz
• Switching interval: 30 minutes
• Battery backup: 36 hours
• Relay durability: 10,000,000 cycles
• Protection class: IP54
• Dimensions: 230 x 300 x 110 mm
• Weight: 2 kg
• Certifications: CE, RoHS
• Warranty: 2 years

🔹 Recommendations and instructions for use:

1. Connect up to 4 600W lamps to the corresponding controller outputs.
2. Connect the heating device to the dedicated heating output.
3. Set the desired lighting on and off times using the built-in timer system.
4. The controller will automatically switch on the heating when the lighting is switched off to maintain an optimal temperature.
5. Regularly inspect and maintain the device to ensure long-lasting and efficient operation.

✅ Benefits of use:

• Efficient energy management: Allows simultaneous control of lighting and heating, optimizing energy consumption.
• Maintaining optimal conditions: Automatically regulates temperature and humidity, creating ideal conditions for plant growth.
• Easy setup and use: An intuitive interface and easy timer setup for lighting and heating.
• High reliability: With long-lasting relay durability and 36-hour battery backup, ensuring uninterrupted operation during power outages.

TechGrow - Clima Micro Plus 5A (Min speed) controls the minimum speed of your fan until the desired temperature is reached or maintained in the grow room. This efficient controller is easy to operate - it has only two rotary knobs - for setting the minimum fan speed and the desired room temperature. There is also an option to set the hysteresis (1°C – 5°C).

• Controls the minimum fan speed until the desired temperature is reached or maintained
• Minimum fan speed setting range: 10% - 100%
• Temperature setting range: 15°C - 35°C
• Hysteresis setting range: 1°C - 5°C
• Minimum required sensor: TempProbe (not included)

Features:

• Controls the minimum fan speed to reach or maintain the desired temperature
• The display shows the current temperature, as well as the set temperature, fan speed, minimum and maximum measured temperature, and hysteresis
• The LED indicates a stable climate or high temperature
• The set minimum fan speed and temperature are retained in the event of a power outage
• Minimum fan speed setting range: 10% - 100%
• Temperature setting range: 15° - 35°C
• Hysteresis setting range: 1°C - 5°C
• The display updates every second
• Automatic switch-off of the display backlight after 60 seconds.
• Automatic detection of cable faults or poor sensor connection
• 2 UTP ports
• Easy fuse replacement (spare fuse included)
• Minimum required sensor: TempProbe (not included)
• Option to connect a TechGrow Datalogger (DL-1)

Technical specifications:

• Power supply: 100-240V
• Power consumption: 3W
• Fuse: 5A
• Power cable: 3x1.5 mm / 1.7 m
• Product dimensions LxHxW: 13x8x7cm.
• Product weight: 934g
• Box dimensions LxHxW: 25x15x14cm.
• Box weight: 1180g

Manual available in 5 languages: here