Equipment

Step transformer that lets you control fans without the low-frequency noise at low speed.

Its six control steps provide better control of the extraction fan according to your selected temperature and humidity settings.

The four buttons allow adjustment of temperature, temperature hysteresis, humidity and humidity hysteresis.
Using the built-in J1 jumper (inside the enclosure), you can choose whether, once the desired temperature and humidity are reached, the fan continues at minimum speed or stops. When J1 is closed, ventilation continues at minimum speed. When it is open, the fan stops completely.

It is supplied with a 4m cable with temperature and humidity sensor, extraction-fan socket and waterproof enclosure.

- temperature range: 20C° - 30C°
- temperature hysteresis: 2C°-8C°
- humidity range: 30% - 100%
- humidity hysteresis: 6%-30%
- size: 265mm x 300mm x 205mm
- max. power: 2,5A
- voltage: 230V / 50HZ
- 5V digital sensor measures temperatures from –55°C to +125°C (–67°F to +257°F)
- accuracy: 0,5C° in the range from -10C° to +85C°; ±4,5%rh
- protection rating: IP54
 

The controller continuously maintains the set temperature and prevents operation below the specified minimum speed or above the permitted maximum speed.

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 12 × 600 W inductive loads.

Standard version – single-phase, with 3 power cables.


Dimensions and technical data:

230 × 300 × 110 mm
230 V / 50 Hz
24 h timer with 36 h battery backup, adjustable in 30 min intervals.
4 × 16 A 230 V
protection class: IP40

Compatibility with 1000 W ballasts and lamps:

circuits: 3 × 16 A
With magnetic ballast: 6 × 1000 W
With electronic ballast: 9 × 1000 W

HortiLight PWM LED Controller is an intelligent controller for managing LED lighting fixtures with PWM (Pulse Width Modulation) control. It enables precise adjustment of light output, automatic programming of lighting modes and remote control, making it an excellent solution for professional and hobby plant-growing systems. It is compatible with LED drivers Mean Well, Inventronics, Osram, Sosen and others that support PWM control.

HortiLight PWM LED Controller is designed to provide full control over LED lighting and simplify the management of the different stages of plant development. Instead of manually switching, turning off and adjusting the lighting, the controller automates the entire process through preset programs and a timer.

The controller allows smooth adjustment of light output from 0% to 100%, allowing the lighting to be adapted to the plant development stage – from germination and rooting to intensive vegetative growth and flowering. It also supports different lighting schedules, which can be programmed according to crop needs.

Its main functions include measuring ambient temperature, enabling better control of conditions in the growing area. It can also be operated by remote control, providing added convenience for daily work.

The controller is compatible with LED fixtures using PWM control and is recommended to be ordered together with compatible lighting to ensure the correct connector type and trouble-free operation.

Technical specifications

✔️ Manufacturer: HortiLight

✔️ Type: PWM LED controller

✔️ Control: PWM (Pulse Width Modulation)

✔️ Lighting adjustment: 0–100%

✔️ Timer function

✔️ Programmable lighting modes

✔️ Ambient temperature measurement

✔️ Remote control

✔️ Plug & Play installation

✔️ Compatible with PWM LED drivers from Mean Well, Inventronics, Osram, Sosen and others.

 Compatibility

The controller is compatible with LED fixtures equipped with PWM control, including:

✔️ HortiLight F50

✔️ HortiLight Spreader

✔️ HortiLight ScrogMaster 800

✔️ Many other LED fixtures with a PWM input and compatible connector.

📦 The kit includes

✔️ 1 × HortiLight PWM LED Controller

✔️ 1 × Remote control

✔️ 1 × Timer

✔️ 1 × User manual.

Benefits

✔️ Precise light-output adjustment from 0 to 100%

✔️ Automatic on/off timer

✔️ Programmable lighting schedules

✔️ Ambient temperature measurement

✔️ Remote control

✔️ Easy Plug & Play installation

✔️ Suitable for professional and home systems

✔️ Compatible with leading PWM-controlled LED drivers.

Application

Suitable for:

• LED grow lighting

• Grow boxes

• Greenhouses

• Nurseries

• Vertical farms

• Vegetative growth

• Flowering

• Home and professional plant cultivation.

📋 Instructions for use

1. Connect the controller to the compatible LED light fixture via the PWM connector.
2. Connect the device to the power supply.
3. Set the desired lighting intensity.
4. Program the on/off times using the timer.
5. If necessary, use the remote control to change settings.
6. Monitor the room temperature and adapt the lighting schedule to the plants' needs.

⚠️ Important: The controller is compatible only with LED fixtures and drivers that support PWM control. Before purchase, check the type of control connector and compatibility with your lighting.

💡 Tip from Urban Botaniks: Use lower light intensity during germination and rooting, then gradually increase output during vegetative growth and flowering. This reduces plant stress and optimises development.

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 12x600W inductive loads.

Variant "+heating" switches on 1 load when the lights are off.


Dimensions and technical specifications:

230x300x110mm
230V / 50Hz
24h timer with a 36h battery, adjustable in 30min increments.
4x16A 230V
protection class: IP40

Compatibility with 1000W ballasts and bulbs:

circuits: 3 x 16A
With magnetic ballast: 6 x 1000W
With electronic ballast: 9 x 1000W

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 6x600W inductive loads.

The "+heating" version includes 1 load when the lights are switched off.


Dimensions and technical data:

230x300x110mm
230V / 50Hz
24h timer with a 36h battery backup, adjustable in 30min increments.
4x16A 230V
protection class: IP40

Compatibility with 1000W ballasts and lamps:

circuits: 2 x 16A
With magnetic ballast: 4 x 1000W
With electronic ballast: 6 x 1000W

A step transformer that lets you control fans without low-frequency noise at low speed.

Its six control steps provide better control of the exhaust fan according to your selected temperature settings.

Two knobs allow you to set the temperature and temperature hysteresis.
Using the built-in J1 jumper (inside the housing), you can choose whether, once the desired temperature is reached, the fan continues at minimum speed or stops. When J1 is closed, ventilation continues at minimum speed. When it is open, the fan stops completely.

It is supplied with a 4m cable with a temperature and humidity sensor, an exhaust-fan outlet and a waterproof enclosure.

- temperature range: 20C° - 30C°
- temperature hysteresis: 2C°-8C°
- dimensions: 265mm x 300mm x 205mm
- max. power: 2,5A
- voltage: 230V / 50HZ
- Digital 5V sensor measures temperatures from –55°C to +125°C (–67°F to +257°F)
- Accuracy: 0,5C° within the range of -10C° to +85C°; ±4,5%rh
- protection rating: IP54

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 8x600W inductive loads.


Dimensions and technical data:

230x300x110mm
230V / 50Hz
24h timer with 36h battery backup, 30min settings.
4x16A 230V
protection class: IP40

Compatibility with 1000W ballasts and lamps:

circuits: 2 x 16A
With magnetic ballast: 4 x 1000W
With electronic ballast: 6 x 1000W

Control the climate in your grow room efficiently with TechGrow Clima Control Plus 7A - both during the day and at night.

• Power supply: from 100
• to 240V consumption: 3W (with sensor
,
• without fan) Maximum fan power: 7 Amp / 1700W
• Temperature setting range:
• 0 - 50°C TMP hysteresis +/- setting

range: 0 - 5°C I

for use here!   This Plus version offers every function available with Clima Control, plus separate daytime and night-time temperature settings, added heater-control functionality and a high-temperature socket. In addition, this controller has an adjustable delay time before switching from day to night mode to prevent unwanted fan cycling. With clear, comprehensive menus and the convenient Push & Turn dial, TechGrow Clima Control Plus 7A is easy for anyone to use. The unique calibration menu lets you determine how much power is required for 10% and 90% speed to set up each unit, regardless of its size. TechGrow Clima Control Plus 7A controls temperature only, but can also display readings from other connected sensors. Compatible with many other TechGrow devices.   Features:

7A heater

• connection day and night
• temperatures can be adjusted separately over
-temperature
• alarm contact adjustab
le
• delay time for switching from day to night temperature L
ED
• indicator for light detection, fan activity, heater activity and stable climate ideal for heating whe
n
• using LED lighting all settings are retained
• during power outages the display shows the min / max va
lues
• of the connected sensor(s) the fan can be operated automa
tically
• or manually the fan controller is adju
stable
• in 10% increments features a unique calibra
tion
• menu for configuring each unit, regardless of size can be connected to multip
le
• TechGrow devices comes without a sensor; sensors
• are available separately option to con
nect
• to Techgrow Datalogger (DL-1) the other functions
• are identical to TechGrow Clima Control 7A

Control the climate in your grow room efficiently with TechGrow Clima Control 14A.

• power supply: from 100 to 240V
• consumption: 3W (with sensor, without fan)
• maximum fan power: 14 Amp / 3400W
• TMP setting range: 10 - 50°C
• TMP hysteresis +/- setting range: 0 - 5°C

Instructions for use here!

TechGrow Clima Control 14A lets you connect two fans at the same time. It has a very clear, comprehensive menu that is easy to learn, and also lets you monitor minimum and maximum values on the display. Thanks to the simple menus and convenient push-and-turn button, TechGrow Clima Control 14A is easy for anyone to use. Its unique calibration menu lets you determine how much power is needed for 10% and 90% speed settings for each unit, regardless of its size. TechGrow Clima Control 14A controls temperature only, but can also display values from other connected sensors. Compatible with many other TechGrow devices.

Features:

• TechGrow Clima Control 14A can measure, display and log min / max values from connected CO₂, humidity and temperature sensors
• All settings are retained in the event of a power outage
• The display shows the min./max. values of its connected sensor(s)
• the display updates every second
• LED indicator for light detection and a stable climate
• the fan can be operated automatically or manually
• the fan controller is adjustable in 10% increments
• includes a unique feature allowing the fan to be adjusted in two simple steps
• offers a calibration menu for setting up each unit, regardless of its size
• automatically turns off the display backlight after 60 seconds
• automatically detects a broken cable or poor connection of connected sensors
• The sensor is connected using a standard network cable (UTP)
• can connect to multiple TechGrow devices
• Multiple sensors are available separately
• option to connect to Techgrow Datalogger (DL-1)

Controlling the climate in your grow room with TechGrow Clima Control Basic Plus 7A is simple yet effective.

• Power supply: from 100 to 240V
• Mains frequency: 50 to 60Hz
• Consumption: 3W (without fan)
• Maximum fan power: 7 Amp / 1700 W
• TMP setting range: 10 - 45°C
• TMP hyst +/- setting range: 1 -7°C
• Probe: pre-fitted temperature probe with 4.5m cable

Instructions for use here!

Setting up the Clima Control Basic Plus 7A is easy with its convenient rotary knobs. Its plain appearance is deceptive, as the Clima Control Basic Plus 7A is equipped with the reliable, advanced TechGrow technology you already know.

The bright green LED display shows the current temperature and set point while you adjust it.

This controller comes with a pre-fitted temperature probe with a 4.5m cable.

Features:

• Plug & Play
• LED indicator for set point and current temperature
• very easy to use
• adjustable minimum and maximum fan power
• analogue control knobs for easy setting adjustment
• two fan sockets
• easy to connect
• easy-to-replace fuse
• spare fuse included

TechGrow T-2 Pro CO2 controller 7A is an unrivalled device that controls CO₂, temperature and humidity in your grow room.

• Power supply: from 100 to 240V
• Consumption: 3W (with a sensor, without a CO₂)
• Maximum fan power: 7 Amp / 1700W
• CO₂ setpoint range : 300 to 2000ppm
• CO₂ +/- setting range: 20 to 200ppm (we recommend 50ppm)
• RH setpoint range: 10% - 90% RH
• RH +/- setting range: 0% - 10% RH
• TMP setpoint range: 0 - 45°C
• TMP hysteresis +/- setting range: 0 - 5°C
• Measurement interval: 1 measurement per second

Note: the sensor is sold separately!

Instructions for use here!

Thanks to this unique combination, you can dose CO₂ during the day while the fan extracts excess CO₂ and moisture produced by your plants at night. TechGrow Pro CO₂ controller T-2 7A increases ventilation at high temperatures, but this can be overridden by setting a very high temperature setpoint. This fully redesigned controller is compatible with many other devices from TechGrow. TechGrow Pro CO₂ controller T-2 7A measures, controls and displays CO₂, humidity and temperature values from connected sensors and records min/max values.

Easy fan control via "Box-menu".

Includes quick menus that provide a brief overview of all settings and measurements.

Recommended sensor: TechGrow S-4 0/2000 ppm

Compatible sensors:

1. ​TechGrow S-4 0/2000 ppm

Features:

• all CO₂ settings are the same as those of TechGrow Pro CO₂ controller T-1
• extraction of excess CO₂ and moisture at night
• unique calibration menu for setting up any grow box, regardless of size
• LED indicator for CO₂, light detection and stable climate
• controls CO₂, temperature and humidity simultaneously
• all settings are retained during power failures
• all setpoint, hysteresis and alarm values are individually adjustable
• quick menu for an overview of all settings and measurements
• the fan can be operated automatically or manually
• the fan controller is adjustable in 10% increments
• includes a unique feature that lets you adjust the fan in two simple steps
• can be connected to multiple devices from TechGrow
• can be connected to TechGrow Datalogger (DL-1)

Electrostart 600W is a lighting kit designed to work with HPS (sodium) and MH (metal-halide) lamps.

• the kit includes: magnetic ballast, igniter and capacitor
• for HPS and MH lamps
• power: 600W
• current draw: 6.2A
• voltage: 230V, 50Hz
• dimensions L/W/H: 24 x 14 x 9cm.
• weight: 7.5kg.

The Bluelab Connect Stick is a USB flash drive that lets you record nutrient solution measurement data and monitor it wirelessly.

• Ability to record collected data [when used together with Bluelab Connect products (sold separately)]
• Download and install the Bluelab Connect software for FREE
• Monitor the data and its current status through Google Docs (a computer with continuous internet access is required)
• 2-year warranty

The Bluelab Connect Stick receives wireless data from Bluelab Connect Monitors, recording it in the cloud. One Bluelab Connect Stick USB flash drive can receive data from several Bluelab Connect devices. Simply plug the Bluelab Connect Stick into your computer's USB port, download and install the Bluelab Connect software for FREE, to start monitoring crop performance wirelessly. View readings from your computer or mobile device to know whether your crop needs attention. Add other Bluelab Connect devices to the software with one click.

Product technical specifications here!

Control the climate in your grow room efficiently with TechGrow Clima Control 7A.

• Power supply: from 100 to 240V
• Power consumption: 3W (with sensor, without fan)
• Maximum fan power: 7 Amp / 1700W
• TMP setting range: 10 - 50°C
• TMP hyst +/- setting range: 0 - 5°C

Instructions for use here!

TechGrow Clima Control 7A lets you connect two fans at the same time. It has a very clear, comprehensive menu that you are already familiar with, which also lets you view min./max. values on the display. Thanks to its straightforward menus and convenient push-and-turn button, TechGrow Clima Control 7A is easy for anyone to use. The unique calibration menu lets you determine how much power is required for 10% and 90% speed when setting up each unit, regardless of its size. TechGrow Clima Control 7A controls the temperature and can also display values from other connected sensors. Compatible with many other TechGrow devices.

Features:

• TechGrow Clima Control 7A can measure, display and record the min./max. values of connected CO₂, humidity and temperature sensors
• All settings are retained in the event of a power outage
• The display shows the min./max. values of its connected sensor(s)
• the display refreshes every second
• LED indicator for light detection and a stable climate
• the fan can be operated automatically or manually
• the fan controller is adjustable in 10% increments
• includes a unique feature allowing the fan to be adjusted in two simple steps
• Offers a unique calibration menu for setting up each unit, regardless of its size and
• automatically turns off the display backlight after 60 seconds
• automatically detects a broken cable or poor connection of connected sensors
• The sensor is connected using a standard network cable (UTP)
• Can be connected to multiple TechGrow devices
• Multiple sensors are available separately
• can be connected to the Techgrow Datalogger (DL-1)

TechGrow T-2 Pro CO₂ 14A controller is an unparalleled device that controls CO₂ levels, temperature and humidity in your grow room.

• Power supply: from 100 to 240V
• Consumption: 3W (with sensor, without CO₂ source)
• Maximum fan power: 14 Amp / 3400W
• Maximum CO₂ source power: 6A / 1500W
• Maximum total power: 16A
• CO₂ system setting range : 300 to 2000ppm
• CO₂ +/- setting range: 20 to 200ppm (we recommend 50ppm)
• RH setting range: 10% - 90% RH
• RH +/- setting range: 0% - 10% RH
• TMP setting range: 0 - 45°C
• TMP hysteresis setting range +/-: 0 - 5°C
• Measurement interval: 1 measurement per second

Note: the sensor is sold separately!

Instructions for use here!

Thanks to this unique combination, you can dose CO₂ during the day, while the fan extracts excess CO₂ and the humidity produced by your plants at night. TechGrow Pro CO₂ controller T-2 14A increases ventilation at high temperatures, but this can be overridden by setting a (very) high set temperature. This fully redesigned controller is compatible with many other TechGrow devices. TechGrow Pro CO₂ controller T-2 14A measures, controls and displays CO₂, humidity and temperature values from connected sensors, and records min / max values.

Easy-to-use fan control via the "Box-menu".

Includes quick menus that provide a brief overview of all settings and measurements.

Recommended sensor: TechGrow S-4 0/2000 ppm

Compatible sensors:

1. ​TechGrow S-4 0/2000 ppm
2. TechGrow S-4 0/10000 ppm

Features:

• all CO₂ settings are the same as those of the TechGrow Pro CO₂ controller T-1
• extraction of excess CO₂ and humidity at night
• unique calibration menu for setting up every box, regardless of size
• LED indicator for CO₂ dosing, light detection and a stable climate
• controls CO₂, temperature and humidity simultaneously
• all settings are retained during power outages
• all setpoint, hysteresis and alarm values are individually adjustable
• quick menu for a quick overview of all settings and measurements
• the fan can be operated automatically or manually
• the fan controller is adjustable in 10% increments
• includes a unique feature allowing the fan to be adjusted in two simple steps
• can be connected to multiple devices from TechGrow
• can be connected to the Techgrow Datalogger (DL-1)

The Lighthouse wireless thermostat is ideal for most heating appliances. These include infrared heaters, tubular heaters, "fan heaters", underfloor heating and portable radiators, as well as various types of cooling equipment.

• Plug and Play (simply plug it in to the mains and switch it on, no installation required)
• automatic wireless connection between the portable thermostat and the switch
• option to select the "heating" or "cooling" function, depending on the appliance to be used
• built-in temperature sensor
• multi-channel - one portable thermostat can control several switches
• portable design, suitable for placement or wall mounting
• displays the current and desired temperature in ºC or ºF
• battery-saving LCD backlight with automatic switch-off
• low battery warning

Technical specifications:

• maximum ratings of the connected appliance: 230V, 50Hz, 13A, 3000W
• power supply for the portable thermostat: 2 x 1.5AA batteries (not included)
• current temperature measurement: 0ºC - 70ºC or 32ºF - 158ºF

Controller with settings for temperature, minimum speed and negative pressure, controlling inlet and outlet air fans.

Dimensions and technical data:

• Product dimensions: W80xH80xD130mm
• Package dimensions: W150xH110xD170mm
• Designed for: 2A / 2x200W / TRIAC 2x16A
• Voltage: 230V / 50HZ
• The 5V digital sensor measures temperatures from –55°C to +125°C (–67°F to +257°F )
• 0.5°C Accuracy from –10°C to +85°C
• Protection rating: IP54

Setting range:

• Temperature: from 20C° to 30C°
• Minimum speed: off, 20%, 100%
• Negative pressure: 100% to 50%

Instructions for use here!

• The controller manages one or two fans – one for inlet air and one for outlet air, or two for outlet air. Connect the exhaust fan to "Fan 1" and the intake fan to "Fan 2". Set the desired temperature value.
• The "Minimum Speed" setting sets the exhaust fan's minimum speed as a percentage of its maximum speed. At "Off", ventilation stops when not needed; at any other value, it runs at the set speed.
• The "Negative Pressure" setting sets the intake fan speed as a percentage of the exhaust fan speed. If you use this controller for 2 exhaust fans, set it to 100%; otherwise, determine the suitable value experimentally.
• As the temperature rises, fan speed increases gradually, reaching 2° 100% higher. As it decreases, the speed also drops to the value set by "Minimum Speed".
• Maintains a constant temperature, and negative pressure keeps odours contained.
• Can be used for two exhaust fans if the room has unrestricted air access.
• Ready to use and reliable, with a waterproof enclosure, socket covers and a low-voltage sensor, making it ideal for humid rooms.
• The sensor has a 4m cable, which can be extended to 50m.

TechGrow Day/Night Fan Controller 14A is the easiest climate-control device to use in your indoor garden. The controller is highly efficient and completely 'plug & play' (you simply connect it to the mains and switch it on). To adjust your fan's day and night speeds, use the two rotary knobs; the settings will switch automatically thanks to the built-in light sensor.

key features:

• controls: fan speed
• display: no
• day/night detection: yes
• light sensor: yes, built-in
• thermal relay: no
• temperature alarm: no

power supply:

• input voltage: 100 - 220V
• power consumption: 3W
• fuse: 15A
• triac: 24A
• power cable: 3 x 1.5 / 1.7m

Note: no option to connect a sensor!

Instructions for use: here*

The controller cannot be connected to a temperature sensor!

Main features:

• Plug and Play (simply connect it to the mains and switch it on).
• Easy to use.
• Ability to set the speed for day and night modes.
• Built-in light sensor for automatic switching between day and night modes.
• Analogue rotary knobs for easy adjustment of settings.
• Continuous-operation capability at 100% fan capacity (full speed).
• Easy-to-replace fuse.

Dimensions and weight:

• product dimensions H/W/D: 21 x 24 x 10cm 
• product weight: 1167g
• package dimensions H/W/D: 25 x 29 x 17cm 
• weight with packaging: 1583g

Humi Heavy is specially designed to control powerful dehumidifiers. Thanks to the additional heavy-duty components, this controller can switch devices up to 10A.

• Power supply: from 100 to 240V
• Mains frequency: 50 to 60 Hz
• Power consumption: 3W
• Switching capacity: 2300W / 10A
• RH setting range: 10 - 90% relative humidity
• RH +/- setting range: 0 - 5% air humidity

Humi Heavy is easy to install and can regulate from 10% to 90% relative humidity. The clear LCD screen provides convenience when setting and reading values, while the LED backlight shows whether Humi Heavy is active. Finally, the set point and hysteresis remain stored in the event of a power failure.

Features:

• Extremely accurate external humidity sensor
• The display shows the minimum / maximum humidity value
• Can regulate relative humidity from 10 to 90%
• The sensor takes a measurement every second
• Switches the connected device with a 230V relay
• Memory for set point and hysteresis in the event of a power failure
• LED indicator shows whether Humi Heavy is active
• LCD display
• Extra-heavy-duty relay (10A)
• Supplied without a sensor; various sensors are available separately

OptiClimate 3500 PRO3 is a water-cooled air conditioner that cools the air using water and heats it with ceramic heaters. It is a self-contained climate-control system that perfectly controls the indoor climate while consuming the least possible energy. OptiClimate has a water inlet and outlet. The inlet is connected to the water supply. Cold water is used to cool the air, causing the water temperature to rise from 35°C to 50°C. This hot water is then discharged through the water outlet or recycled.

• functions for: cooling, heating, dehumidifying (dehumidifier), air circulation and air filtration .
• power consumption at 230V: 740W
• cooling capacity: 3.5kW (for 6 x 600 HPS)
• dehumidifies: 55L (per 24 h)
• water consumption: 1-2L/min
• 2 x 1500W ceramic heaters
• flange diameter: ⌀ 250mm (1 pc included)
• dimensions: 100 x 50 x 42cm
• weight: 57kg
• warranty: 1 year

Why choose OPTICLIMATE?

This is ideal for cooling properties near water sources, such as canal houses, houseboats, yachts, swimming pools or greenhouses. The water-cooled OptiClimate is perfect for use in historic buildings, where an outdoor unit cannot be installed. If your house has a swimming pool, you can use the water-cooled OptiClimate to cool your house and heat the pool.

• PRO3 comes with an included remote control (controller), which allows all processes to run fully automatically and be monitored at the same time. Once the minimum temperature (night mode) and maximum temperature (day mode) have been set using the remote control, OptiClimate will heat or cool according to the night or day setting, ensuring that the preset temperatures are not exceeded. The night or day setting is controlled by a light sensor. In the day setting (cooling), OptiClimate also dries the air. If necessary, using the included hydrostat, OptiClimate can also dry the air in the night setting, thereby reducing humidity.

• OptiClimate dries the air by continually finding the right balance between heating and cooling. This allows the dehumidification function to operate even after the desired temperature has been reached. OptiClimate's dehumidification capacity is more than sufficient for most applications. It is one and a half to two times more effective than a construction dehumidifier.

SAFE AND SECURE CLIMATE CONTROL! 

1. The built-in temperature safety switch ensures that the lights switch off if the set maximum temperature is exceeded, for example when the water supply is disrupted.
2. OptiClimate is fire-safe because all electrical components, including the heating and connections, are installed in a steel enclosure.
3. OptiClimate has an alarm output that can be used to send an SMS alert in the event of a malfunction.

Instructions for use in English: here*