Mini Greenhouses for Seedlings and Heat Mats

ROOT!T Large Value Propagator is a box for seed germination or rooting cuttings. It consists of:

• lid with two humidity-control vents
• tray with longitudinal channels to prevent overwatering
• dimensions L/W/H: 57 x 37 x 21cm.

ROOT!T VALUE Rooting Sponge Propagation Kit is a complete kit for germinating seeds or rooting cuttings. The kit contains:

• propagator with a humidity-control vent
• tray with 24 cells
• 24 pcs. rooting sponges
• 15 ml sample initial feed
• 15 ml sample rooting gel
• English-language instructions for optimal results
• dimensions L/W/H: 38 x 24 x 18.5 cm.

ROOT!T Propagator Tray Insert is a 60-cell tray for rooting plugs, suitable for placing in a ROOT!T propagator.

• 60 cells
• dimensions: 52x32x5cm

tray for JIFFY
84 cells

Tray specially designed for Jiffy-7C 33mm blocks.

Dimensions 52x32cm.

Jiffy-7 trays are designed to hold the pellets securely while allowing free air circulation, which helps prevent disease and supports root development.

tray for JIFFY
60 cells

Tray specially designed for Jiffy-7C 41mm pellets.

Dimensions 52x32cm.

Jiffy-7 trays are designed to hold the pellets securely while allowing free air circulation, which helps prevent disease and supports root development.

ROOTiT Propagator Tray is a tray / base for the ROOT!T propagator.

• equipped with longitudinal channels to prevent overwatering
• dimensions: 57x37x5.5 cm.

ROOT!T Thermostat for Heat Mat is an electronic device that gives you full control over the temperature in the root zone during germination / rooting. By switching heat mats on and off, the device maintains the precisely set desired temperature (10-30ºC). It is compatible with all ROOT!T heat mats.

• Maintain optimal temperatures for your plants!
• Easy to plug in!
• Easy to use and control!
• Sensor cable length: 1.8 m
• Max. load: 1000 W / 4.3 A

Preparing for use:

1. Place the temperature sensor in the propagator or in the area to be heated. It can be suspended using the rubber suction cup or placed in the substrate (image 3).
2. Place the thermostat outside the propagator or growing area – the thermostat and output socket must always be kept in a dry place! DO NOT IMMERSE IN WATER OR LIQUIDS!
3. Plug the heat mat or other heating device into the output socket.
4. Connect the thermostat to the mains supply – the POWER indicator should light up.
5. Proceed to set the desired temperature to be maintained.

Setting the thermostat:

The display shows the current temperature at the sensor. Press UP to display degrees Fahrenheit ºF or DOWN to display degrees Celsius ºC – the corresponding indicator will light up.

1. Press the SET button to show the desired temperature on the display; after 3 seconds, it will return to the current temperature.
2. Press and hold the SET button for 3 seconds; the display will start flashing. Press UP or DOWN to select the desired temperature to be maintained.
3. Press SET again to return the display to the current temperature; if left untouched, it will return to the current temperature display after 30 seconds.

The HEATING indicator will light up if the current temperature is lower than the desired temperature – the heat mat / heating device is now ON. The HEATING indicator will not light up if the current temperature is higher than the desired temperature – the heat mat / heating device is now OFF.

Glass House Propagator 64 is a propagator made of high-quality rigid plastic, suitable for seed germination, growing small plants or rooting cuttings.

• dimensions: 59x39x24cm.
• a sturdy, durable and waterproof polypropylene tray
• a transparent, impact-resistant polystyrene lid for maximum light transmission
• sliding ventilation openings for easy humidity control

ROOT!T Medium Heat Mat is a heat mat that evenly warms the root zone, improving germination and rooting. Maintaining a consistent temperature is a key factor for success in the early stages, when young plants are at their most delicate and vulnerable.

• dimensions W/L: 40x60cm.
• Accelerates seed germination or clone rooting by days.
• Warms the root zone 5.5-11˚C above ambient temperature.
• Fully waterproof, scratch-resistant and durable.
• To set your desired precise temperature, use together with the ROOT!T heat mat thermostat.

Instructions for use:

1. Place the heat mat on a thoroughly dry surface.
2. For better results, place the mat on an insulated surface rather than directly on a cold floor.
3. Place the propagation tray (seeds, clones) on the mat. Cover it with a propagator lid – this will keep the root zone warm and maintain humidity for better rooting.
4. Connect to the mains power supply (220-240V).
5. This heat mat is designed to warm the root zone 5.5-11˚C above ambient temperature.

Warning:

• Fire or electric shock may result from improper use!
• Ensure that there are no sharp objects on the surface beneath the heat mat that could puncture it! Do not place the mat directly in the tray / propagator and do not cover it with soil or another growing medium!
• Do not cover the mat with thermal insulation materials, as this may cause overheating!
• Do not immerse in water!

The Neptune Hydroponics heated propagator is a quality propagator with a 12V heating mat. It lets you germinate flowers, vegetables or aromatic herbs during the winter months; their seeds will develop at an ideal temperature and be ready for transplanting at the beginning of spring.

• dimensions: 38 x 25 x 19 cm.

The Propagator Pro 70 seedling-growing set is sturdy and durable. It is easily ventilated through ventilation openings in the lid. The walls and lid are slightly angled so that condensed water runs to the sides rather than onto the plants.

• Dimensions: 58cm length, 38cm width, 24cm height
• The set includes: a waterproof tray and lid
• The lid is fitted with adjustable ventilation openings
• Made of hard, dense plastic - does not bend
• Material: polypropylene PP (tray) and polystyrene PS (lid)

The propagator is sold without a seedling-cell tray (insert). Suitable options are:

Eazy Plug CT150 and Eazy Plug CT77

Cultilene rockwool cubes - 77pc tray

Jiffys-7 - 41mm tray with 60 cells

You can also place small pots inside: Soft seedling pot 7x7x8cm

Garland Micro Greens Reservoir Tray Without Holes is the ideal tray for growing microgreens. Use it together with the Garland Micro Greens Growing Tray With Holes. Used together, the two trays provide optimal watering and drainage for your microgreens. The tray can also be used as a “blackout” tray when turned upside down and placed over the microgreens growing tray, accelerating the seed germination process in the first days after planting.

• material: injection-moulded plastic Bisphenol A-free (BPA)
• robust and durable plastic allows repeated use for years
• 100% recyclable
• dimensions: 56 x 28 x 3 cm

ROOTiT Propagator Lid is a lid for a ROOT!T propagator.

• two humidity-control vents
• dimensions: 57x37x15.5cm

ROOT!T Large Heat Mat is a heating mat that evenly warms the root zone, improving germination and rooting. Maintaining a constant temperature is a key factor for success in the early stages, when young plants are most delicate and vulnerable.

• Dimensions W/L: 40x120cm.
• Accelerates seed germination or rooting of clones by whole days.
• Warms the root zone 5.5-11˚C above ambient temperature.
• Fully waterproof, scratch-resistant and durable.
• To set your desired precise temperature, use together with the ROOT!T heat mat thermostat.

Instructions for use:

1. Place the heat mat on a thoroughly dry surface.
2. For better results, place the mat on an insulated surface rather than directly on a cold floor.
3. Place the propagation tray (seeds, clones) on the mat. Cover it with a propagator lid – this will keep the root zone warm and maintain humidity for better rooting.
4. Connect to the mains power supply (220-240V).
5. This heat mat is designed to warm the root zone 5.5–11˚C above the ambient temperature.

Warning:

• Fire or electric shock may result from improper use!
• Make sure there are no sharp objects on the surface beneath the heat mat that could puncture it! Do not place the mat directly in the tray / propagator and do not cover it with soil or another growing medium!
• Do not cover the mat with heat-insulating materials, as this may cause overheating!
• Do not immerse in water!

PLAGRON Seedbox is a complete set for faster and more vigorous seed germination. Used by both hobbyists and professional gardeners, it is a guarantee of success during the initial stage of your plants' development. The set contains:

• small propagator
• 12 germination plugs / pellets
• 250 ml rooting stimulant Plagron Seedbooster
• instruction booklet in 12 languages

Dosage and directions for use:

1. Dissolve the entire bottle of Seedbooster rooting stimulant in 250 ml of lukewarm water. Stir gently.
2. Pour the solution into the tray, distributing the liquid evenly over the germination plugs. Wait a few minutes until the plugs absorb all the water.
3. With clean hands, take the seeds and plant them at a depth of 5 mm in the holes in the centre of the germination plugs.
4. Place the transparent lid on the tray. Ensure that the lid fits exactly between the slots on the inside of the tray. This will close the propagator completely.
5. Place the propagator in a room with a temperature of 20–24 °C.
6. After 1 to 5 days, the seeds will begin to germinate. Remove the lid from the slots and place it slightly askew on the tray, creating four small openings through which fresh air can reach the seedlings.
7. Ensure that the seedlings receive enough light to develop properly. Once the seedlings reach the plastic lid, it can be removed. As soon as roots begin to grow out of the germination plugs, the plants are ready for transplanting and further cultivation.

Grow healthy plants from seed at home or in your greenhouse with the Garland Professional Seed tray for seed germination and seedlings. Grow

• like the professionals! For seed germination, growing microgreens or rooting seedlings drainage holes,
• reducing the risk of overwatering Practical,
• space-saving size Made from
• recycled plastic 100% recyclable
• Dimensions: 37

x 23.5 x 6 cm

Heating mat for mini propagators 50/25 cm with thermostat

Short description:

• Optimal control: Maintains the ideal temperature for germination and growth.
• Thermostat set: Easy adjustment and precise temperature control.
•  Ideal for beginners: Suitable for mini propagators and home gardening.

Detailed description:

Improve conditions for your propagators with this 50/25 cm heating mat, paired with a precise thermostat for temperature control. This set is perfect for beginner and experienced gardeners, providing optimum conditions for seed germination and seedling development.

Features:

• Dimensions: 50/25 cm – ideal for small propagators.
• Thermostat set: Precise temperature control for even heating.
• Convenience: Easy to install and operate, suitable for home use.
• Energy efficiency: Provides a stable temperature with low energy consumption.
• Versatility: Suitable for all types of seeds and plants.

Garland Micro Greens Growing Tray With Holes is the ideal tray for growing microgreens. Use it in combination with the Garland Micro Greens Reservoir Tray Without Holes. Used together, the two trays provide optimal watering and drainage for your microgreens.

• material: injection-moulded plastic Bisphenol A-free (BPA)
• robust and durable plastic allows repeated use for years
• 100% recyclable
• dimensions: 56 x 28 x 3 cm

ROOT!T Small Heat Mat is a heating mat, which warms the root zone evenly, improving germination and rooting. Maintaining a constant temperature is a key factor for success in the early stages, when young plants are most delicate and vulnerable.

• W/L dimensions: 25x35cm.
• Speeds up seed germination or the rooting of clones by days.
• Warms the root zone 5.5-11˚C above ambient temperature.
• Fully waterproof, scratch-resistant and durable.
• To set your desired precise temperature, use together with the ROOT!T heat mat thermostat.

Instructions for use:

1. Place the heat mat on a thoroughly dry surface.
2. For better results, place the mat on an insulated surface rather than directly on a cold floor.
3. Place the propagation tray (seeds, clones) on the mat. Cover it with a propagator lid – this will keep the root zone warm and maintain humidity for better rooting.
4. Connect to the mains power supply (220-240V).
5. This heat mat is designed to warm the root zone 5.5–11˚C above the ambient temperature.

Warning:

• Fire or electric shock may result from improper use!
• Make sure there are no sharp objects on the surface beneath the heat mat that could puncture it! Do not place the mat directly in the tray / propagator and do not cover it with soil or another growing medium!
• Do not cover the mat with heat-insulating materials, as this may cause overheating!
• Do not immerse in water!

Grow healthy plants from seed at home or in your greenhouse with the Garland Professional Gravel seedling and propagation tray. Grow like the professionals!

• For seed germination, growing microgreens or rooting seedlings
• Practical, space-saving size
• Made from recycled plastic
• 100% recyclable

Dimensions: 37 x 23.5 x 6 cm

🔹 Garland Small High Dome Propagator is a compact and efficient tool for growing seedlings and cuttings. Measuring 38 x 24 x 18 cm, it is ideal for placing on a windowsill, providing optimal conditions for germination and growth. The transparent lid with an adjustable ventilation opening allows easy humidity control, while the specially designed tray ensures effective drainage.

🔹 Detailed features:

• Dimensions: 38 x 24 x 18 cm
• Materials: Durable plastics suitable for repeated use
• Lid: Transparent with an adjustable ventilation opening
• Tray: Designed for effective drainage and preventing water retention
• Color: Green with a transparent lid
• Manufacturer: Garland Products

🔹 Recommendations and instructions for use:

1. Place a suitable potting mix or substrate in the tray.
2. Plant the seeds or cuttings in the prepared mix.
3. Place the lid on the tray and adjust the ventilation opening to provide optimal conditions for germination.
4. Place the propagator in a bright, warm location, such as a windowsill.
5. Check the moisture regularly and water when necessary.

✅ Benefits of use:

• Ideal size: Its compact dimensions make it suitable for any space.
• Humidity control: The adjustable ventilation opening allows easy humidity management.
• Effective drainage: The specially designed tray prevents excess water from accumulating.
• Reusable: Durable materials ensure long-lasting use.

EP 42 Cover is a lid for the EP 42 propagator for rooting seeds.

• made of soft plastic
• dimensions L/W/H: 38 x 24 x 9 cm

Kit for germination of seeds and rooting of cuttings with built-in LED lighting. The system provides a suitable environment for the early development of plants, supporting stable germination and a healthy start of seedlings. It is suitable for home cultivation, greenhouses or use in seasons with less natural light.

Capacity: 40 individual nests for seeds or cuttings, allowing simultaneous germination of a large number of plants.

Lighting: equipped with 2 LED strips with cold light, which provide additional light for better development of young plants.

Dimensions: 38 × 24 × 12 cm — compact size, suitable for placing on a table, shelf or work surface.

Construction: includes a tray and seedling compartments that facilitate organized germination and plant maintenance.

Purpose: suitable for germinating vegetables, herbs, flowers and other plants, as well as for rooting cuttings.

🔹  30W VDL Seedling Heat Mat - dimensions 55x35cm. is an electric heating mat designed to maintain optimal temperature conditions for seed germination, rooting cuttings, and growing sensitive plants. It provides precise temperature control, which is especially useful in cold conditions.

🔹 Detailed specifications:

• Dimensions: 55x35 cm
• Power: 30 W
• Material: Flexible, moisture-resistant PVC surface
• Application: Suitable for use under pots, seedling trays, or in greenhouses
• Manufacturer: VDL

🔹 Recommendations and instructions for use:

1. Place the mat on a flat, dry surface.
2. Place the pot or container with the plants on the mat.
3. Connect the mat to the electrical outlet.
4. Periodically check the soil moisture and water when necessary.

✅ Benefits of use:

• Improved germination: Provides warmth that accelerates seed germination.
• Healthy growth: Stimulates the rooting of cuttings and the growth of young plants.
• Economical: Low energy consumption (30 W).
• Versatility: Suitable for various types of plants and growing conditions.

EP 42 Tray is a tray for the EP 42 seed-rooting propagator.

• made of soft plastic
• dimensions L/W/H: 38 x 24 x 5 cm

The medium Garland garden tray without drainage holes is suitable for seed germination or rooting seedlings. It is made from recycled plastic.

• dimensions L/W/H: 37.5 x 23 x 6 cm
• material: hard plastic
• colour: black
• 100% recyclable

The tray is suitable for use with the EP 42 propagator lid (sold separately).

Secret Jardin DP120 is a propagator / mini greenhouse for growing small and low plants. Ideal for germinating seeds, raising seedlings, cuttings or mother plants. The propagator comes with two DF16 flanges for connecting ducting to an intake and exhaust fan.

• dimensions W/D/H: 120 x 60 x 190 cm
• steel poles: ⌀ 16mm
• 4 shelves
• sturdy and waterproof base that can be removed
• zip: 100% lightproof

Full technical specifications: here*

Assembly instructions: here*

Features:

• dimensions W/D/H: 120 x 60 x 190 cm
• steel profiles: ⌀ 16mm
• 4 shelves
• flanges: 2 pcs. DF16
• air duct connector: 1 pc. ⌀ 100mm
• light baffle: 1 pc.
• sturdy and waterproof base that can be removed
• zip: 100% lightproof
• weight:19.8 kg
• max. load per profile: 10kg
• max. load for the entire propagator: 50kg

Flexible tray for seed germination, growing microgreens and rooting seedlings.

• suitable for: seeds, microgreens, and seedlings
• material: soft plastic
• dimensions: 31 x 51 x 4 cm

Mammoth Propagator 90 is a medium-sized propagator that provides excellent conditions for sowing or cloning plants over an area of 0.54m². This budget mini propagator is suitable for both hobby growers and more experienced gardeners.

• ideal for seeds and cuttings / clones
• dimensions: 90 x 60 x 60cm
• steel poles: ⌀ 16mm
• reflective lining: Mylar Silver 190D
• ventilation port: ⌀ 150mm
• easy and quick assembly

Advantages:

• fully lightproof, easy-to-clean single-layer cover
• silver Mylar Silver 190D lining with ~ 90% reflectivity
• robust corners and connectors made from rigid PP polymer
• metal poles with a diameter of 16mm and a thickness of 0.4mm are made of lightweight steel
• ports for ventilation and cable routing
• removable floor tray
• easy and quick assembly

Technical specifications:

• dimensions: 90 x 60 x 60cm
• growing area: 0.54m²
• access opening: front door
• side opening: 2 pcs.
• ventilation port: ⌀ 150mm
• cable-routing port: ⌀ 76mm