Promotions

TechGrow Day/Night Fan Controller 7A is the easiest climate-control device to use in your indoor garden. The controller is highly efficient and completely ‘plug & play’ (simply connect it to the mains and switch it on). To regulate your fan's day and night speeds, use the two rotary knobs; the settings switch automatically thanks to the integrated light sensor.

 

key features:

 

• controls: fan speed
• display: no
• day/night detection: yes
• light sensor: yes, built-in
• thermal relay: no
• temperature alarm: no

 

power supply:

 

• input voltage: 100 - 220V
• power consumption: 3W
• fuse: 8A
• triac: 12A
• power cable: 3 x 0.75 / 1.7m

 

Note: connection to a sensor is not possible!

Instructions for use: here*

 

The controller cannot be connected to a temperature sensor!

 

Main features:

 

• Plug and Play (simply connect it to the mains and switch it on).
• Easy to use.
• Ability to set the speed for day and night modes.
• Built-in light sensor for automatic switching between day and night mode.
• Analogue rotary knobs for easy adjustment of settings.
• Continuous-operation capability at 100% fan capacity (full speed).
• Easy-to-replace fuse.

 

Dimensions and weight:

 

• product dimensions H/W/D: 21 x 24 x 10cm
• product weight: 1167g
• package dimensions H/W/D: 25 x 29 x 17cm
• weight with packaging: 1583g

With this air distribution duct, you deliver fresh air and improve the climate in your growing room.

 

• diameter: ⌀ 125 mm
• length: 5m

Hager Power Panel 32x600w, 8x continuous, 2x heater

VEAB CWK 315-3-2.5 is a professional duct water cooler for Ø315 mm air ducts, designed to cool air in ventilation and air-conditioning systems using cold water. The heat exchanger has copper tubes and aluminium fins, while the built-in stainless-steel tray collects the resulting condensate. This model is suitable for both central ventilation systems and cooling individual rooms or greenhouses.

CWK 315-3-2.5 is installed directly in a round air duct and uses chilled water as the energy carrier. This allows the air passing through the ventilation system to be cooled without the need for a direct evaporative refrigerant heat exchanger.

The construction is designed for easy maintenance – the casing has an opening cover for inspection and cleaning, while condensate is drained via a stainless-steel tray and G½" drain connection.

Technical specifications

• Manufacturer: VEAB
• Model: CWK 315-3-2.5
• Type: Duct water cooler
• Purpose: Ventilation-air cooling
• Heat-transfer medium: Cold / chilled water
• Air-duct diameter: Ø315 mm
• Number of heat exchanger rows: 3
• Fin spacing: 2.5 mm
• Pipe connections: Ø22 mm
• Condensate drain: G½"
• Internal heat exchanger volume: 1.61 l
• Maximum working pressure: 1.0 MPa / 10 bar
• Installation: In a horizontal air duct
• Heat exchanger: Copper pipes with aluminium fins
• Condensate tray: Stainless steel
• Air-duct connections: With rubber seals.

📐 Dimensions

According to the current VEAB technical documentation for CWK 315-3-2.5:

 

💨 Cooling capacity

Cooling capacity is not a fixed value. It depends on airflow and air temperature, humidity, as well as the temperature and flow rate of the chilled water.

For example, with water at 6/12°C, the VEAB table gives the following indicative results for CWK 315-3-2.5:

Airflow	Inlet air	RH	Outlet air	Power
900 m³/h	25°C	50%	15.2°C	3.4 kW
900 m³/h	30°C	45%	16.3°C	5.8 kW
1590 m³/h	25°C	50%	16.8°C	4.8 kW
1590 m³/h	30°C	45%	17.8°C	9.3 kW
2280 m³/h	25°C	50%	17.6°C	6.1 kW
2280 m³/h	30°C	45%	18.6°C	12.8 kW

These values are example design points, not a constant product output. For a specific system, VEAB recommends calculation according to the actual air and water parameters.

💧 Control and automation

The CWK itself is a water-to-air heat exchanger. For automatic temperature control, the system can be supplemented with:

temperature controller → sensor → control valve → actuator → frost protection.

For example, VEAB specifies for the CWK 315-3-2.5 a two-way valve ZTV15-1.6 (Kvs 1.6) as a suitable option in its selection table.

This is important for the product page – control components must not be presented as included as standard, unless the specific offer explicitly states this.

💦 Condensate drainage

When warm, humid air is cooled, the heat exchanger temperature may fall below the dew point and condensation may form.

For this reason, the CWK is equipped with a stainless-steel tray that collects the water and allows it to drain through a G½" drain connection.

🛠️ Construction and maintenance

The heat exchanger uses copper tubes and aluminium fins, while the casing is made of protected sheet metal. The opening cover provides access to the interior for periodic cleaning and inspection.

Rubber seals on the round connections make integration into the ventilation system easier.

You can view the manual

by clicking on the label.

🏭 Suitable for

VEAB CWK 315-3-2.5 is suitable for:

• ventilation and air-conditioning systems;
• cooling of supply fresh air;
• air-conditioning of individual rooms and zones;
• greenhouses and controlled environments;
• production and technical premises;
• systems with a chiller or another source of cold water.

The manufacturer explicitly states use both for cooling ventilation air and for individual cooling of specific rooms or zones.

📦 Product information

Model: CWK 315-3-2.5
Manufacturer: VEAB Heat Tech AB
Diameter: Ø315 mm
Warranty: 24 months

⭐ Key benefits

✔️ Professional water cooler for Ø315 mm air ducts
✔️ Operates with cold water
✔️ 3-row heat exchanger
✔️ Copper tubes and aluminium fins
✔️ Integrated stainless-steel condensate tray
✔️ Drain connection G½"
✔️ Maximum working pressure 10 bar
✔️ Openable housing for easy cleaning
✔️ Option for automatic temperature control
✔️ Manufactured by VEAB.

 

 

Cooltube is a cooling glass tube designed to provide even lighting for plants without excess heat. It reduces the heat output of the lamp installed in it by up to 40%. Heat is extracted through a suitable air duct connected to the tube.

• Length: 49 cm
• Tube diameter: Ø150 mm
• Suitable for 400W or 600W MH or HPS lamps
• WITHOUT reflector
• Includes an E40 lamp holder
• Materials: glass and aluminium

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 6x600W inductive loads.


Dimensions and technical data:

230x300x110mm
230V / 50Hz
24h timer with 36h battery backup, 30min settings.
4x16A 230V
protection rating: IP40

Compatible with 1000W ballasts and lamps:

circuits: 2 x 16A
With magnetic ballast: 4 x 1000W
With electronic ballast: 4 x 1000W

The AZERWING reflector by Prima Klima, with an E40 socket for HPS & MH lamps, ensures uniform light distribution without creating so-called “hot spots”. The Vega reflector sheet is a unique PVD 4-Layer system with light reflectance of up to 95% after the shaping process

• Length: 750 mm
• Width: ~500-950 mm
• Height: ~250-380 mm
• Maximum for 2 x 600W
• Weight: 2.80 kg

• 95% reflectance
• Adjustable lighting angle
• Adjustable lamp tilt
• Even light distribution, without hot spots
• Optimal cooling and flexible connection.

TechGrow - Clima Micro Day/Night Fan Controller 5A is a controller that regulates your fan speed through two operating modes — day and night. You can easily set the desired speed using the rotary knobs, as well as a delay time from 0 to 10 minutes. The controller does not connect to a sensor and does not measure CO2, temperature or humidity!

 

• Very easy to use
• Adjustable fan speed for day and night modes
• Adjustable delay time of up to 10 minutes
• Built-in light sensor

Features:

 

• 100% plug & play (connect to the mains and switch on)
• Very easy to use
• Adjustable fan speed for day and night modes
• Adjustable delay time of up to 10 minutes
• Built-in light sensor
• Analogue rotary knobs for easy setting adjustment
• Easy fuse replacement (spare fuse included)
   

Technical specifications:

 

• Power supply: 100-240V
• Power consumption: 3W
• Fuse: 5A
• Power cable: 3x1.5mm / 1.7m
• Product dimensions LxHxW: 13x8x9cm 
• Product weight: 660g
• Box dimensions LxHxW: 25x15x14cm 
• Box weight: 906g

The CCELL Palm Battery 550mAh in pink is the ideal accessory for anyone seeking a combination of style, convenience and performance. With the included charger, this battery will provide seamless vaping throughout the day. Whether you are a beginner or an experienced vaper, the CCELL Palm Battery is an investment worth making.

• battery capacity: 500mAh
• H/W/D dimensions: × × cm
• aluminium alloy body
• standard 510
thread
• inhalation activated
• magnetic connection
• built-in LED indicator
• Micro-USB charging

 

Step transformer that lets you control fans without the low-frequency noise at low speed.

Its six control steps provide better control of the extraction fan according to your selected temperature and humidity settings.

The four buttons allow adjustment of temperature, temperature hysteresis, humidity and humidity hysteresis.
Using the built-in J1 jumper (inside the enclosure), you can choose whether, once the desired temperature and humidity are reached, the fan continues at minimum speed or stops. When J1 is closed, ventilation continues at minimum speed. When it is open, the fan stops completely.

It is supplied with a 4m cable with temperature and humidity sensor, extraction-fan socket and waterproof enclosure.

- temperature range: 20C° - 30C°
- temperature hysteresis: 2C°-8C°
- humidity range: 30% - 100%
- humidity hysteresis: 6%-30%
- size: 265mm x 300mm x 205mm
- max. power: 2,5A
- voltage: 230V / 50HZ
- 5V digital sensor measures temperatures from –55°C to +125°C (–67°F to +257°F)
- accuracy: 0,5C° in the range from -10C° to +85C°; ±4,5%rh
- protection rating: IP54
 

Enhance your vaping experience with the CCELL Palm Battery in stylish blue. Designed for use with a variety of pods and cartridges, this battery combines high performance with a compact, modern design. Powerful Performance: With a 550mAh capacity, this battery provides extended use between charges. Compact Size: Its minimalist design makes it easy and convenient to carry in a pocket or bag. Buttonless Operation: Automatic draw activation makes use fast and convenient. High-Quality Charger: The included charger ensures fast, reliable charging while protecting the battery from overload. Protection Features: Built-in safety features prevent overheating and short circuits. The CCELL Palm Battery 550mAh in blue is the ideal accessory for anyone seeking a combination of style, convenience and performance. With the included quality charger, this battery will provide trouble-free vaping all day long. Whether you are a beginner or experienced vaper, the CCELL Palm Battery is an investment worth making.

CELLMAX Allzymes is the latest enzyme formula on the market today. After years of research and testing, we discovered a powerful enzyme concentrate with a concentration of 1:1000 (1ml in 1 litre of water). It is highly effective and, due to its concentration, the enzyme formula contains more active elements. We enriched this new enzyme solution formula with additional phosphorus, potassium and vitamins to support healthy plant development.

CELLMAX Allzymes is the successor to CELLMAX Super Enzyme. This updated product is a highly concentrated enzyme preparation developed by CELLMAX. This product has an extended shelf life due to its high concentration and gives the end user assurance of active elements. Allzymes contains: Active Cellulases and  Enzymatic Pectinase complexes. The active enzymes in this product stimulate microbial life and regulate the breakdown of dead organic matter in the substrate. By breaking down dead organic material, beneficial sugars, nutrients and proteins are made available to the plant. CELLMAX Allzymes  is a unique blend enriched with vitamins, phosphorus, potassium and cactus extracts to activate plants' natural resilience.

 

Directions for use:

 

• Dilution ratio (1:1000) 1ml in 1 litre of water. This product is suitable for all growing styles and substrates.

 

Growing guidelines:

 

• We recommend continuously adding Allzymes to the nutrient solution from the 4th week onward.

 

Substrate flushing instructions:

 

• When using older (untreated) substrates, double the dose!

 

Use:

 

• Shake well before use!
• Do not store the nutrient solution for more than 2-4 days!
• Do not use this product with hydrogen peroxide (H₂O₂)!

 

Note:

 

• This new formula has a higher EC value than the previous recipe of CELLMAX Super Enzyme.

The controller continuously maintains the set temperature and prevents operation below the specified minimum speed or above the permitted maximum speed.

Hysteresis determines the temperature range. It can be easily controlled by adjusting your desired minimum speed, maximum speed and hysteresis with four knobs. Controller: W x H x D = 160 x 100 x 90 mm Designed for: 10A 2300W Voltage: 230V / 50Hz Digital 5V sensor measures temperatures from -55°C to +125°C (-67°F to +257°F) Accuracy: 0.5°C from -10°C to +85°C Protection rating: IP54

Hager Power Panel 44x600w, 8x continuous and 3x heater

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 12 × 600 W inductive loads.

Standard version – single-phase, with 3 power cables.


Dimensions and technical data:

230 × 300 × 110 mm
230 V / 50 Hz
24 h timer with 36 h battery backup, adjustable in 30 min intervals.
4 × 16 A 230 V
protection class: IP40

Compatibility with 1000 W ballasts and lamps:

circuits: 3 × 16 A
With magnetic ballast: 6 × 1000 W
With electronic ballast: 9 × 1000 W

 

HortiLight PWM LED Controller is an intelligent controller for managing LED lighting fixtures with PWM (Pulse Width Modulation) control. It enables precise adjustment of light output, automatic programming of lighting modes and remote control, making it an excellent solution for professional and hobby plant-growing systems. It is compatible with LED drivers Mean Well, Inventronics, Osram, Sosen and others that support PWM control.

HortiLight PWM LED Controller is designed to provide full control over LED lighting and simplify the management of the different stages of plant development. Instead of manually switching, turning off and adjusting the lighting, the controller automates the entire process through preset programs and a timer.

The controller allows smooth adjustment of light output from 0% to 100%, allowing the lighting to be adapted to the plant development stage – from germination and rooting to intensive vegetative growth and flowering. It also supports different lighting schedules, which can be programmed according to crop needs.

Its main functions include measuring ambient temperature, enabling better control of conditions in the growing area. It can also be operated by remote control, providing added convenience for daily work.

The controller is compatible with LED fixtures using PWM control and is recommended to be ordered together with compatible lighting to ensure the correct connector type and trouble-free operation.

 

Technical specifications

✔️ Manufacturer: HortiLight

✔️ Type: PWM LED controller

✔️ Control: PWM (Pulse Width Modulation)

✔️ Lighting adjustment: 0–100%

✔️ Timer function

✔️ Programmable lighting modes

✔️ Ambient temperature measurement

✔️ Remote control

✔️ Plug & Play installation

✔️ Compatible with PWM LED drivers from Mean Well, Inventronics, Osram, Sosen and others.

 

 Compatibility

The controller is compatible with LED fixtures equipped with PWM control, including:

✔️ HortiLight F50

✔️ HortiLight Spreader

✔️ HortiLight ScrogMaster 800

✔️ Many other LED fixtures with a PWM input and compatible connector.

 

📦 The kit includes

✔️ 1 × HortiLight PWM LED Controller

✔️ 1 × Remote control

✔️ 1 × Timer

✔️ 1 × User manual.

 

Benefits

✔️ Precise light-output adjustment from 0 to 100%

✔️ Automatic on/off timer

✔️ Programmable lighting schedules

✔️ Ambient temperature measurement

✔️ Remote control

✔️ Easy Plug & Play installation

✔️ Suitable for professional and home systems

✔️ Compatible with leading PWM-controlled LED drivers.

 

Application

Suitable for:

• LED grow lighting

• Grow boxes

• Greenhouses

• Nurseries

• Vertical farms

• Vegetative growth

• Flowering

• Home and professional plant cultivation.

 

📋 Instructions for use

1. Connect the controller to the compatible LED light fixture via the PWM connector.
2. Connect the device to the power supply.
3. Set the desired lighting intensity.
4. Program the on/off times using the timer.
5. If necessary, use the remote control to change settings.
6. Monitor the room temperature and adapt the lighting schedule to the plants' needs.

⚠️ Important: The controller is compatible only with LED fixtures and drivers that support PWM control. Before purchase, check the type of control connector and compatibility with your lighting.

💡 Tip from Urban Botaniks: Use lower light intensity during germination and rooting, then gradually increase output during vegetative growth and flowering. This reduces plant stress and optimises development.

 

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 12x600W inductive loads.

Variant "+heating" switches on 1 load when the lights are off.


Dimensions and technical specifications:

230x300x110mm
230V / 50Hz
24h timer with a 36h battery, adjustable in 30min increments.
4x16A 230V
protection class: IP40

Compatibility with 1000W ballasts and bulbs:

circuits: 3 x 16A
With magnetic ballast: 6 x 1000W
With electronic ballast: 9 x 1000W

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 6x600W inductive loads.

The "+heating" version includes 1 load when the lights are switched off.


Dimensions and technical data:

230x300x110mm
230V / 50Hz
24h timer with a 36h battery backup, adjustable in 30min increments.
4x16A 230V
protection class: IP40

Compatibility with 1000W ballasts and lamps:

circuits: 2 x 16A
With magnetic ballast: 4 x 1000W
With electronic ballast: 6 x 1000W

HortiLight LED Grow Bar Light G5 30W is an energy-efficient LED bar designed for supplementary lighting of plants throughout all stages of development. Thanks to its compact design and low heat output, it can be installed close to plants and is suitable for mini greenhouses, shelving, propagation areas, vertical systems and as a complement to primary lighting.

HortiLight LED Bar 162 is designed for growers who want to improve illumination in specific areas or provide even light distribution across plants. Thanks to its compact dimensions, the LED bar is suitable for installation under shelves, in propagators, on racks or as side lighting in grow rooms.

LED technology delivers low energy consumption, a long service life and minimal heat output. This allows the light to be placed close to plants without the risk of overheating or scorching the foliage.

The bar emits a full-spectrum light suitable for both vegetative growth and flowering. It can be used on its own for small plants or as supplementary lighting alongside more powerful LED systems to improve light penetration into the lower parts of plants.

The light is designed for easy installation and can be linked to other compatible LED bars (Daisy Chain), allowing larger lighting systems to be built to suit the needs of the space.

 

Technical specifications

✔️ Manufacturer: HortiLight

✔️ Model: LED Bar 162

✔️ Type: LED plant bar

✔️ Power consumption: 35W

✔️ Light spectrum: Growth spectrum

✔️ Intended use: Vegetative growth

✔️ LED technology

✔️ Low heat output

✔️ Passive cooling

✔️ Daisy Chain connectivity (with compatible models)

✔️ Suitable for horizontal or vertical installation

✔️ CE and RoHS certification.

 

📦 The kit includes

✔️ 1 × HortiLight LED Bar 162

✔️ Mounting components

✔️ User manual.

 

 

📋 Instructions for use

1. Install the LED bar above or beside the plants using the included mounting components.
2. If desired, connect several LED bars into one system via Daisy Chain.
3. Position the lighting at a suitable distance according to the crop's requirements.
4. Periodically clean the housing with a soft dry cloth to ensure maximum efficiency.

Hager Power Panel 24x600w, 4x continuous, 1x kachel/heater

A step transformer that lets you control fans without low-frequency noise at low speed.

Its six control steps provide better control of the exhaust fan according to your selected temperature settings.

Two knobs allow you to set the temperature and temperature hysteresis.
Using the built-in J1 jumper (inside the housing), you can choose whether, once the desired temperature is reached, the fan continues at minimum speed or stops. When J1 is closed, ventilation continues at minimum speed. When it is open, the fan stops completely.

It is supplied with a 4m cable with a temperature and humidity sensor, an exhaust-fan outlet and a waterproof enclosure.

- temperature range: 20C° - 30C°
- temperature hysteresis: 2C°-8C°
- dimensions: 265mm x 300mm x 205mm
- max. power: 2,5A
- voltage: 230V / 50HZ
- Digital 5V sensor measures temperatures from –55°C to +125°C (–67°F to +257°F)
- Accuracy: 0,5C° within the range of -10C° to +85C°; ±4,5%rh
- protection rating: IP54

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 8x600W inductive loads.


Dimensions and technical data:

230x300x110mm
230V / 50Hz
24h timer with 36h battery backup, 30min settings.
4x16A 230V
protection class: IP40

Compatibility with 1000W ballasts and lamps:

circuits: 2 x 16A
With magnetic ballast: 4 x 1000W
With electronic ballast: 6 x 1000W

Control the climate in your grow room efficiently with TechGrow Clima Control Plus 7A - both during the day and at night.

• Power supply: from 100
• to 240V consumption: 3W (with sensor
,
• without fan) Maximum fan power: 7 Amp / 1700W
• Temperature setting range:
• 0 - 50°C TMP hysteresis +/- setting

range: 0 - 5°C I

nstructions

for use here!   This Plus version offers every function available with Clima Control, plus separate daytime and night-time temperature settings, added heater-control functionality and a high-temperature socket. In addition, this controller has an adjustable delay time before switching from day to night mode to prevent unwanted fan cycling. With clear, comprehensive menus and the convenient Push & Turn dial, TechGrow Clima Control Plus 7A is easy for anyone to use. The unique calibration menu lets you determine how much power is required for 10% and 90% speed to set up each unit, regardless of its size. TechGrow Clima Control Plus 7A controls temperature only, but can also display readings from other connected sensors. Compatible with many other TechGrow devices.   Features:

7A heater

• connection day and night
• temperatures can be adjusted separately over
-temperature
• alarm contact adjustab
le
• delay time for switching from day to night temperature L
ED
• indicator for light detection, fan activity, heater activity and stable climate ideal for heating whe
n
• using LED lighting all settings are retained
• during power outages the display shows the min / max va
lues
• of the connected sensor(s) the fan can be operated automa
tically
• or manually the fan controller is adju
stable
• in 10% increments features a unique calibra
tion
• menu for configuring each unit, regardless of size can be connected to multip
le
• TechGrow devices comes without a sensor; sensors
• are available separately option to con
nect
• to Techgrow Datalogger (DL-1) the other functions
• are identical to TechGrow Clima Control 7A

Robust filter stand suitable for all sizes. Easy height and width adjustment. Height 174-240 cm, width 60-99 cm

Control panel for 32 x 600 W, 2 x groups, 2 x heaters, 380 Vat

DV44, 16x600W EU distribution board

With this air distribution duct, you deliver fresh air and improve the climate in your growing room.

 

• diameter: ⌀ 315mm
• length: 10m

CELLMAX Organic Bloom is an easy-to-use liquid organic fertilizer for flowering plants. This product supports vigorous fruit development and excellent flavour. It is an organic fertilizer that can be absorbed directly by your plants.

 

• High-quality end product and 100% effective
• Total NPK: 3-2-5

CELLMAX Organic Bloom professional plant fertilizer for organic growing

CELLMAX Organic Bloom was developed by CELLMAX Nutrients and delivers outstanding results in organic growing. Its advantage is that it can be absorbed directly by your plants. Organic Bloom enables your crop to flower more abundantly. This product supports healthy plants and abundant flowering. Organic Bloom contains no harmful components such as plant growth regulators and no toxic filler substances.

 

Dosage:

 

• Dilute at a ratio of 1: 250 (40 ml in 10 L of water). Organic Bloom can be sprayed or poured and works perfectly in automatic irrigation systems.

 

Directions for use:

 

• Shake well before use. Recommended pH: 5.5-6.4. For soil cultivation, learn more about CELLMAX Organic Pro Soil.

 

Storage:

 

• Store in a cool, dark place; protect from freezing! Contains chelates! Keep away from children!

 

Contents:

 

• Contains trace elements and ferments. NPK 3-2-5 + iron.

 

Ingredients in % (W/W):

 

• 3.3% total N
• 1.6% N derived from vinasse
• 1.9% P₂O₅
• 5.0% K₂O
• 0.02% Fe DTPA chelate

Control the climate in your grow room efficiently with TechGrow Clima Control 14A.

• power supply: from 100 to 240V
• consumption: 3W (with sensor, without fan)
• maximum fan power: 14 Amp / 3400W
• TMP setting range: 10 - 50°C
• TMP hysteresis +/- setting range: 0 - 5°C

Instructions for use here!

 

TechGrow Clima Control 14A lets you connect two fans at the same time. It has a very clear, comprehensive menu that is easy to learn, and also lets you monitor minimum and maximum values on the display. Thanks to the simple menus and convenient push-and-turn button, TechGrow Clima Control 14A is easy for anyone to use. Its unique calibration menu lets you determine how much power is needed for 10% and 90% speed settings for each unit, regardless of its size. TechGrow Clima Control 14A controls temperature only, but can also display values from other connected sensors. Compatible with many other TechGrow devices.

 

Features:

• TechGrow Clima Control 14A can measure, display and log min / max values from connected CO₂, humidity and temperature sensors
• All settings are retained in the event of a power outage
• The display shows the min./max. values of its connected sensor(s)
• the display updates every second
• LED indicator for light detection and a stable climate
• the fan can be operated automatically or manually
• the fan controller is adjustable in 10% increments
• includes a unique feature allowing the fan to be adjusted in two simple steps
• offers a calibration menu for setting up each unit, regardless of its size
• automatically turns off the display backlight after 60 seconds
• automatically detects a broken cable or poor connection of connected sensors
• The sensor is connected using a standard network cable (UTP)
• can connect to multiple TechGrow devices
• Multiple sensors are available separately
• option to connect to Techgrow Datalogger (DL-1)

Garden Highpro MATRIX is a high-quality, open-type air-cooled reflector (without protective glass) with a pyramid shape.

 

• pyramid reflector made from "pearl" aluminium
• natural heat dissipation (without protective glass)
• safe junction box for concealed wiring
• L/W/H dimensions: 68 x 62 x 15cm
• air-exhaust flange diameter: ⌀ 125mm
• lamp socket: E40 (included)
• suitable for: 250W, 400W, 600W bulbs