Lighting — Promotions

Hager Power Panel 36x600w, 8x continuous 2x heater

Garden Highpro MAXLIGHT Air Cooled Reflector is an air-cooled reflector – the perfect solution for problems with controlling the heat generated by indoor growing lighting. The tempered glass, which acts as an insulator, allows you to position the lamp closer to your plants, so that they receive even more light. If you want to replace the bulb or simply clean it, the glass fastening mechanism allows easy removal without having to disconnect the air ducts.

 

• reflective surface material: premium "pearl" aluminium
• housing material: composite plastic
• dimensions LxWxH: 605 x 480 x 215 mm.
• inlet/outlet diameter: Ø150 mm.
• weight: 4.8 kg.
• lamp holder: E40 (included)
• suitable for: 250W, 400W, 600W bulbs

LUMii Black LED Bar 30W UV/FR is a specialised LED lamp designed to supplement the main lighting in your indoor garden with important ultraviolet (UV) and far-red (FR) spectra. LUMii Black Bar 30w UV/FR LED is a simple bar-shaped LED lamp that provides supplementary ultraviolet and infrared light to extend the light spectrum provided by other light sources. It is designed to connect to the LUMii Black Blade 400w LED fixture, but can also be used alongside any other full-spectrum grow light to increase crop yield and quality, stimulate growth and support flowering. It plugs in and operates with its own power cable; we recommend controlling it with a timer and using it for about 2 hours a day during the photoperiod. USPs: Adds UVA rays (385 nm) to the grow-light spectrum Adds infrared wavelengths (730 nm) to the grow-light spectrum Fits directly onto the LUMii Black Blade 400w LED Can be used as supplementary lighting with any other grow lighting Powered directly from the mains Technical specifications: Power 30 W ± 5 % Input voltage 100-277 V AC / 50-60 kHz Input current 0,3 A at 100 V, 0,11 A at 277 V Output 56,60 umol/s - wavelength 200-800 nm Chips 385 nm and 730 nm Light beam angle 120° Protection rating IP65 Dimensions Length 605 mm (23,82") Width 57 mm (2,24") Depth 31 mm (1,21") Weight 0,85 kg / 1,87 lb Operating ambient temperature and humidity 0°C - 40°C (32°F - 104°F). Maximum relative humidity 95% Storage temperature and humidity -40°C - 70°C (-40°F - 158°F). Maximum relative humidity 85%

Cosmorrow Kit 200w PPE 2.7 Full Spectrum provides optimal and efficient lighting for all stages of indoor plant growth, combining a full light spectrum with high energy efficiency.

Growing plants indoors requires the right tool, and Cosmorrow Kit 200w PPE 2.7 Full Spectrum is exactly that. This lamp is designed specifically for gardeners seeking high-quality lighting that meets the needs of different plant stages. With its full light spectrum, it ensures that your plants receive all the wavelengths needed for optimal growth and flowering. Its 200W power and PPE 2.7 ensure maximum efficiency with minimal electricity consumption. The kit includes everything needed for quick and easy installation. Whether you are a beginner or an experienced gardener, Cosmorrow Kit will help you grow healthy plants with abundant harvests.

Secret Jardin Cosmorrow LED 40W L90cm IR is a single LED strip emitting in the infrared spectrum. Ideal for supplementary vertical lighting for plants in your tent. The power supply is not included - sold separately! You can purchase it here!

 

• accelerates flowering
• warms the plants
• longer internodes
  
• power: 40W
• voltage: 24V
• efficacy: 1.7µmol/s
• light ratio: 33% IR : 66% 2100°K
• dimming option: yes
• water resistance: IP65
• sturdy and drop-resistant
• warranty: 1 year

 

We recommend using it with a separate timer from the main lighting!

Technical specifications:

 

• accelerates flowering
• warms the plants
• longer internodes
• power: 40W
• voltage: 24V
• efficacy: 1.7µmol/s
• light ratio: 33% IR : 66% 2100°K
• dimming option: yes
• water resistance: IP65
• sturdy and drop-resistant
• dimensions L/W/H: 87 x 3.2 x 1.5cm
• weight: 0.30kg

protects plants from lamp heat

Mounts beneath the lamp and allows it to be positioned as close as possible to plant tops without burn risk. Light is reflected toward the reflector for more even illumination. For 1000W lamps.


eliminates "hot spots"
white coating for diffuse light distribution
protects plants from burns
saves energy and increases efficiency

Electrostart 1000W is a lighting kit designed to operate with HPS (sodium) and MH (metal-halide) lamps.

 

• the kit includes: magnetic ballast, igniter and capacitor
• for HPS and MH lamps
• power: 1000W
• power consumption: 10.3A
• voltage: 230V, 50Hz
• dimensions L/W/H: 25 x 17 x 9 cm.
• weight: 12.0 kg.

 

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Hager Power Panel 32x600w, 8x continuous, 2x heater

Cooltube is a cooling glass tube designed to provide even lighting for plants without excess heat. It reduces the heat output of the lamp installed in it by up to 40%. Heat is extracted through a suitable air duct connected to the tube.

• Length: 49 cm
• Tube diameter: Ø150 mm
• Suitable for 400W or 600W MH or HPS lamps
• WITHOUT reflector
• Includes an E40 lamp holder
• Materials: glass and aluminium

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 6x600W inductive loads.


Dimensions and technical data:

230x300x110mm
230V / 50Hz
24h timer with 36h battery backup, 30min settings.
4x16A 230V
protection rating: IP40

Compatible with 1000W ballasts and lamps:

circuits: 2 x 16A
With magnetic ballast: 4 x 1000W
With electronic ballast: 4 x 1000W

The AZERWING reflector by Prima Klima, with an E40 socket for HPS & MH lamps, ensures uniform light distribution without creating so-called “hot spots”. The Vega reflector sheet is a unique PVD 4-Layer system with light reflectance of up to 95% after the shaping process

• Length: 750 mm
• Width: ~500-950 mm
• Height: ~250-380 mm
• Maximum for 2 x 600W
• Weight: 2.80 kg

• 95% reflectance
• Adjustable lighting angle
• Adjustable lamp tilt
• Even light distribution, without hot spots
• Optimal cooling and flexible connection.

Hager Power Panel 44x600w, 8x continuous and 3x heater

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 12 × 600 W inductive loads.

Standard version – single-phase, with 3 power cables.


Dimensions and technical data:

230 × 300 × 110 mm
230 V / 50 Hz
24 h timer with 36 h battery backup, adjustable in 30 min intervals.
4 × 16 A 230 V
protection class: IP40

Compatibility with 1000 W ballasts and lamps:

circuits: 3 × 16 A
With magnetic ballast: 6 × 1000 W
With electronic ballast: 9 × 1000 W

 

HortiLight PWM LED Controller is an intelligent controller for managing LED lighting fixtures with PWM (Pulse Width Modulation) control. It enables precise adjustment of light output, automatic programming of lighting modes and remote control, making it an excellent solution for professional and hobby plant-growing systems. It is compatible with LED drivers Mean Well, Inventronics, Osram, Sosen and others that support PWM control.

HortiLight PWM LED Controller is designed to provide full control over LED lighting and simplify the management of the different stages of plant development. Instead of manually switching, turning off and adjusting the lighting, the controller automates the entire process through preset programs and a timer.

The controller allows smooth adjustment of light output from 0% to 100%, allowing the lighting to be adapted to the plant development stage – from germination and rooting to intensive vegetative growth and flowering. It also supports different lighting schedules, which can be programmed according to crop needs.

Its main functions include measuring ambient temperature, enabling better control of conditions in the growing area. It can also be operated by remote control, providing added convenience for daily work.

The controller is compatible with LED fixtures using PWM control and is recommended to be ordered together with compatible lighting to ensure the correct connector type and trouble-free operation.

 

Technical specifications

✔️ Manufacturer: HortiLight

✔️ Type: PWM LED controller

✔️ Control: PWM (Pulse Width Modulation)

✔️ Lighting adjustment: 0–100%

✔️ Timer function

✔️ Programmable lighting modes

✔️ Ambient temperature measurement

✔️ Remote control

✔️ Plug & Play installation

✔️ Compatible with PWM LED drivers from Mean Well, Inventronics, Osram, Sosen and others.

 

 Compatibility

The controller is compatible with LED fixtures equipped with PWM control, including:

✔️ HortiLight F50

✔️ HortiLight Spreader

✔️ HortiLight ScrogMaster 800

✔️ Many other LED fixtures with a PWM input and compatible connector.

 

📦 The kit includes

✔️ 1 × HortiLight PWM LED Controller

✔️ 1 × Remote control

✔️ 1 × Timer

✔️ 1 × User manual.

 

Benefits

✔️ Precise light-output adjustment from 0 to 100%

✔️ Automatic on/off timer

✔️ Programmable lighting schedules

✔️ Ambient temperature measurement

✔️ Remote control

✔️ Easy Plug & Play installation

✔️ Suitable for professional and home systems

✔️ Compatible with leading PWM-controlled LED drivers.

 

Application

Suitable for:

• LED grow lighting

• Grow boxes

• Greenhouses

• Nurseries

• Vertical farms

• Vegetative growth

• Flowering

• Home and professional plant cultivation.

 

📋 Instructions for use

1. Connect the controller to the compatible LED light fixture via the PWM connector.
2. Connect the device to the power supply.
3. Set the desired lighting intensity.
4. Program the on/off times using the timer.
5. If necessary, use the remote control to change settings.
6. Monitor the room temperature and adapt the lighting schedule to the plants' needs.

⚠️ Important: The controller is compatible only with LED fixtures and drivers that support PWM control. Before purchase, check the type of control connector and compatibility with your lighting.

💡 Tip from Urban Botaniks: Use lower light intensity during germination and rooting, then gradually increase output during vegetative growth and flowering. This reduces plant stress and optimises development.

 

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 12x600W inductive loads.

Variant "+heating" switches on 1 load when the lights are off.


Dimensions and technical specifications:

230x300x110mm
230V / 50Hz
24h timer with a 36h battery, adjustable in 30min increments.
4x16A 230V
protection class: IP40

Compatibility with 1000W ballasts and bulbs:

circuits: 3 x 16A
With magnetic ballast: 6 x 1000W
With electronic ballast: 9 x 1000W

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 6x600W inductive loads.

The "+heating" version includes 1 load when the lights are switched off.


Dimensions and technical data:

230x300x110mm
230V / 50Hz
24h timer with a 36h battery backup, adjustable in 30min increments.
4x16A 230V
protection class: IP40

Compatibility with 1000W ballasts and lamps:

circuits: 2 x 16A
With magnetic ballast: 4 x 1000W
With electronic ballast: 6 x 1000W

HortiLight LED Grow Bar Light G5 30W is an energy-efficient LED bar designed for supplementary lighting of plants throughout all stages of development. Thanks to its compact design and low heat output, it can be installed close to plants and is suitable for mini greenhouses, shelving, propagation areas, vertical systems and as a complement to primary lighting.

HortiLight LED Bar 162 is designed for growers who want to improve illumination in specific areas or provide even light distribution across plants. Thanks to its compact dimensions, the LED bar is suitable for installation under shelves, in propagators, on racks or as side lighting in grow rooms.

LED technology delivers low energy consumption, a long service life and minimal heat output. This allows the light to be placed close to plants without the risk of overheating or scorching the foliage.

The bar emits a full-spectrum light suitable for both vegetative growth and flowering. It can be used on its own for small plants or as supplementary lighting alongside more powerful LED systems to improve light penetration into the lower parts of plants.

The light is designed for easy installation and can be linked to other compatible LED bars (Daisy Chain), allowing larger lighting systems to be built to suit the needs of the space.

 

Technical specifications

✔️ Manufacturer: HortiLight

✔️ Model: LED Bar 162

✔️ Type: LED plant bar

✔️ Power consumption: 35W

✔️ Light spectrum: Growth spectrum

✔️ Intended use: Vegetative growth

✔️ LED technology

✔️ Low heat output

✔️ Passive cooling

✔️ Daisy Chain connectivity (with compatible models)

✔️ Suitable for horizontal or vertical installation

✔️ CE and RoHS certification.

 

📦 The kit includes

✔️ 1 × HortiLight LED Bar 162

✔️ Mounting components

✔️ User manual.

 

 

📋 Instructions for use

1. Install the LED bar above or beside the plants using the included mounting components.
2. If desired, connect several LED bars into one system via Daisy Chain.
3. Position the lighting at a suitable distance according to the crop's requirements.
4. Periodically clean the housing with a soft dry cloth to ensure maximum efficiency.

Hager Power Panel 24x600w, 4x continuous, 1x kachel/heater

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 8x600W inductive loads.


Dimensions and technical data:

230x300x110mm
230V / 50Hz
24h timer with 36h battery backup, 30min settings.
4x16A 230V
protection class: IP40

Compatibility with 1000W ballasts and lamps:

circuits: 2 x 16A
With magnetic ballast: 4 x 1000W
With electronic ballast: 6 x 1000W

Control panel for 32 x 600 W, 2 x groups, 2 x heaters, 380 Vat

DV44, 16x600W EU distribution board

Garden Highpro MATRIX is a high-quality, open-type air-cooled reflector (without protective glass) with a pyramid shape.

 

• pyramid reflector made from "pearl" aluminium
• natural heat dissipation (without protective glass)
• safe junction box for concealed wiring
• L/W/H dimensions: 68 x 62 x 15cm
• air-exhaust flange diameter: ⌀ 125mm
• lamp socket: E40 (included)
• suitable for: 250W, 400W, 600W bulbs

Hager Power Panel 48x600W, 8 continuous outlets and 3 heater outlets

Electrostart 600W is a lighting kit designed to work with HPS (sodium) and MH (metal-halide) lamps.

 

• the kit includes: magnetic ballast, igniter and capacitor
• for HPS and MH lamps
• power: 600W
• current draw: 6.2A
• voltage: 230V, 50Hz
• dimensions L/W/H: 24 x 14 x 9cm.
• weight: 7.5kg.

DV33, 12x600W distribution board + Heating EU

• For use only with 1000W 400V DE EL lamps
• No acoustic resonance
• Up to 8% more light from the lamp
• Efficiency after 5000 operating hours - >95%
• System design and concept by Gavita
• Sealed (Class I), with a ventilation outlet made of Gore Tex
• Microprocessor-controlled, with LED ballast-status indicator
• Professional UV-resistant wiring
• Driver efficiency at full power - 95-96%
• Extremely low heat output and optimal cooling

Gavita Pro 1000 DE

 

Gavita Pro 1000 DE is the first 240-volt electronic ballast designed to power professional 1000W 400V DE EL (electronic) lamps. These lamps offer the best PAR output, an improved spectrum and the best maintenance of light efficiency (>95% PAR after one year of use). The lamp is the most efficient horticultural lamp on the market and the only one designed specifically for electronic ballasts.

Gavita Pro 1000 is available as a complete kit including a professional HortiStar HR 96 1000 DE reflector, or as a separate ballast. The ballast is fully enclosed and has no cooling fan, as it emits exceptionally little heat during operation. This allows safe, easy installation close to your lamp, reducing the amount of electromagnetic interference that reaches the ballast and significantly extending its service life and efficiency. The kit is easy to install using two bolts.

Specifications here!

 

 

DV44, distribution board 16x600W + Heating EU

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal-halide (MH) lamps.

High-quality Miro9 material with 97% reflectivity.

Special plastic flanges to prevent accidents and reduce heat.

Mounting kit included.

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal-halide (MH) lamps

 

Cool Tube is an indispensable piece of equipment for hydroponic and indoor growing. Our new Cool Tubes are designed to offer greater efficiency and safety to our customers. The product is more efficient because Prima Klima uses a special Miro9 material for the reflectors, which provides 97% reflectivity. The highly durable plastic flanges offer greater efficiency in removing heat from plants and more safety for users, as plastic does not conduct electricity. Our Cool Tubes are manufactured in Europe in accordance with all safety standards.

• High-quality Miro9 material with 97% reflectivity
• Special plastic flanges to prevent accidents and reduce heat
• Mounting kit included

Introducing the smartest, most powerful and most efficient LED lighting on the market! DIMLUX XTREME SERIES LED 500W+NIR. 

 

Dimlux Xtreme Series LED 500W + NIR produces ultra-high levels of PPFD of 1550μmol/s, evenly distributed over an area of 1.2 x 1.2m. It emits a full spectrum for cultivation, consistently producing crops with high yields and high quality. The Dimlux Xtreme Series LED 500W + NIR can be dimmed without a loss of efficiency; the spectrum and power can be programmed according to the time of day and growth stage of the crop being cultivated.

 

• power: 540W at 230-240V
• total light output (PPF 350-800nm): 1550μmol/s
• total photon efficacy (PPF 350-800nm): 2.9μmol/J
• coverage area: 1.2 x 1.2m
• optics: patented lens with deep penetration and ultra-high transmittance
• additional light: patented multicolour 65k light tube
• built-in Doppler proximity sensor
• control: built-in (via the display) or with the Dimlux Maxi Controller
• smart ports X3: plant temperature sensor, light sensor, interlink

THE MOST POWERFUL AND INTELLIGENT LED LIGHTING FOR GROWING PLANTS ON THE MARKET! With these innovative LED fixtures, Dimlux sets the benchmark for horticultural lighting. With patented technology, advances in LED technology and an optimal thermal design, Dimlux Xtreme Series LED will be the preferred option, offering a significant return on investment for hobby and professional growers alike. Our adjustable spectrum for growing with PhytoVegSpec® +NIR Indoor combines complete control over the quality of light (spectral flexibility) and the quantity (intensity and DLI), ensuring uniform spreading and even distribution of light with extreme penetration into the crop.

1. +NIR (NEAR INFRA-RED) (NEAR INFRARED 700-750NM = FAR RED). This lighting fixture has an amount of far-red light that is used together with red light. In addition, the far-red light provides a more complete spectrum, increased photosynthesis, increased photon absorption and higher yield due to adapted morphology. Due to the additional far-red component, plants will become slightly taller than with the version without +NIR.
2. COLOUR IPS DISPLAY AND USER INTERFACE. The integration of a colour IPS screen and PhytoVegspec® makes the Xtreme series unique and special. Its special feature is that the spectra and the B:R (blue:red) ratio, or the amount of blue to red light, are displayed very accurately on the screen. Using this information, lighting recipes can be exchanged between growers and companies using values that are quantitatively measurable and therefore universally exchangeable. The values that can be controlled are the percentages of BLUE, GREEN and RED light, the B:R ratio, PPF, PPFD, DLI, power, the percentages of emitted light, plant temperature and air temperature.
3. BUILT-IN OR EXTERNAL CONTROL. The lighting fixture can operate entirely independently and even serve as the main unit in a group with other lighting fixtures. They can also be controlled by external devices such as the Dimlux Maxi Controller or other controllers. Since the lighting fixture can be updated via Wi-Fi, it is possible to work according to the latest trends in lighting strategy and supplement the spectrum by adding additional lighting fixtures.
4. DRIVERLESS DESIGN (ballast). The drivers that power the LEDs are integrated into the frame of the lighting fixture. Since high-voltage drivers are used, efficiency is particularly high and heat losses are therefore lower. This lower heat loss makes it possible to integrate the drivers into the frame.
5. TILTED LENSES WITH DEEP PENETRATION AND ULTRA-HIGH TRANSMITTANCE. The tilted LED bars are designed to provide the ideal balance between light penetration and its even spread. At the recommended height above the crop, uniformity higher than 95% can be achieved when multiple lighting fixtures are used. Because the light from the lenses is focused, less scattered light is lost on walls and walkways. The patented ultra-high-transmittance lens is internally shaped in such a way that the light rays that would normally be reflected back towards the LED (converted back into heat) now end up right next to the LED and are reflected.
6. ADDITIONAL LIGHT TUBE WITH FULL-COLOUR LEDs. Our lighting fixtures have unique additional lighting that is directed through lenses built into the light tube. The auxiliary lights consist of full-colour LEDs and serve as additional lighting, an alarm indicator, a plant-temperature indicator or night lighting, depending on the situation.
7. SMART PORTS 3X. The Xtreme series has 3 available Smart ports. These are universal communication ports with various connection options for a wide range of sensors, such as a Plant Temperature Sensor, an Air Temperature Sensor, CO₂ and humidity, as well as climate-control devices. Communication can be both analogue and digital through the Smart Protocol. It is possible to control up to 160 lighting fixtures via analogue communication and >1000 fixtures via the Smart Protocol.
8. DOPPLER RADAR PROXIMITY SENSOR. The built-in Doppler radar sensor can detect movement up to 3 metres away. This sensor is used, for example, to activate the screen and for automatic activation of (green) additional lighting at night. The intensity and colour of the additional lighting can be adjusted so that the room can be entered at night without disturbing the plants' rhythm. Because the night lighting switches on only when movement is detected, it will not unnecessarily illuminate areas where it is not needed. The night lighting can be set to different intensities and colours, such as blue, which appears to have less effect on the sleep rhythm than green light, but to which human vision is less sensitive. The sensor will also be used to automatically switch off UV rays when the additional fixtures are used, preventing eye and skin damage.

Brochure and instructions for use in English: here*, here* and here*

 

Full technical specifications:

 

• model: Xtreme Series 500W (+ NIR)
• full spectrum: adjustable PhytoVegspec® +NIR Indoor
• total light output (PPF 350-800nm): 1550μmol/s
• total photon efficacy (PPF 350-800nm): 2.9μmol/J
• power: 540W at 230-240V
• voltage: 120-277V AC, 50/60Hz
• beam angle: 90° × 120°
• mounting height above plants: 20-50cm
• optics: patented deep-penetration lens with ultra-high transmissivity
• supplementary light: patented 65k multicolour light tube
• proximity sensor: Doppler radar
• cooling: passive
• max. ambient temperature: 40°C
• control: built-in (via the display) or with the Dimlux Maxi Controller
• smart ports X3: plant temperature sensor, light sensor, interlink
• spectrum display with graphical user interface (control menu): 1.54" 65k-colour IPS
• THD: < 10%
• lifetime: > 50 000 hours
• water and dust resistance: IP65
• certification: CE, UL 8800, UL 1598 Wet Location, DLC
• warranty: 5 years
• dimensions: 84 x 81 x 6cm
• weight: 13.3kg