Lighting

The PVC liner for artificial ponds, measuring 4× 25 m and 0.5 mm thick, is a reliable solution for constructing decorative ponds, water gardens, fountains, streams and other water features. Thanks to its high flexibility and waterproof properties, it easily follows the terrain contours and provides long-lasting protection against leaks.

The PVC liner is designed to provide reliable waterproofing when constructing various water features. The material is sufficiently flexible to follow curves, terraces and irregularities in the terrain, while maintaining its strength and resistance during prolonged use. This makes it suitable for both small decorative ponds and larger water projects.

With a thickness of 0.5 mm, the liner offers a good balance between strength and easy installation. It forms a reliable waterproof barrier that prevents water from seeping into the soil and reduces water loss from the artificial pond. In addition, the material is weather-resistant and can be easily cut and shaped to suit the specific project.

The liner is suitable for use in garden ponds, decorative water features, waterfalls and fountains. For maximum protection and a longer service life, it is recommended to install it over protective geotextile, which protects the membrane from punctures caused by stones, roots and other sharp objects.

 ^{Technical specifications}

✔️ Type: PVC liner for artificial ponds

✔️ Size: 4 × 25 m

✔️ Area: 100 m²

✔️ Thickness: 0.5 mm

✔️ Colour: Black

✔️ Material: PVC

✔️ Waterproof

✔️ Flexible and easy to shape

✔️ Weather-resistant

✔️ Suitable for outdoor use.

 Application

Suitable for:

• Garden ponds

• Decorative water features

• Fountains

• Waterfalls

• Streams

• Water gardens

• Landscaping projects

• Landscape design.

📋 Instructions for use

1. Prepare the base by removing stones, roots and other sharp objects.
2. It is recommended to lay protective geotextile beneath the liner.
3. Spread the liner over the excavated pond and shape it to the terrain.
4. Leave sufficient excess material around the edges for secure fixing.
5. Fill the pond gradually with water, smoothing out any folds that form.
6. Secure the edges with decorative stones, edging or another suitable material.

⚠️ Important: To reduce the risk of mechanical damage, always use protective geotextile beneath the liner. This significantly extends its service life and protects it from punctures caused by stones or roots.

💡 Tip from Urban Botaniks: For more complex pond shapes, leave extra liner material around the edges. This will make shaping easier and ensure more secure fixing after the final filling with water.

Osram 600W, MST and Stucco lighting kit for indoor growing. The kit includes:

• bulb / lamp: dual-spectrum Osram Plantastar 600W 1 pc.
• ballast: hybrid MST 600W 1 pc.
• reflector: open textured Stucco 1 pc.

Caution: the kit does not include cables or a plug!

Introducing the smartest, most powerful and most efficient LED lighting on the market! DIMLUX XTREME SERIES LED 500W+NIR. 

Dimlux Xtreme Series LED 500W + NIR produces ultra-high levels of PPFD of 1550μmol/s, evenly distributed over an area of 1.2 x 1.2m. It emits a full spectrum for cultivation, consistently producing crops with high yields and high quality. The Dimlux Xtreme Series LED 500W + NIR can be dimmed without a loss of efficiency; the spectrum and power can be programmed according to the time of day and growth stage of the crop being cultivated.

• power: 540W at 230-240V
• total light output (PPF 350-800nm): 1550μmol/s
• total photon efficacy (PPF 350-800nm): 2.9μmol/J
• coverage area: 1.2 x 1.2m
• optics: patented lens with deep penetration and ultra-high transmittance
• additional light: patented multicolour 65k light tube
• built-in Doppler proximity sensor
• control: built-in (via the display) or with the Dimlux Maxi Controller
• smart ports X3: plant temperature sensor, light sensor, interlink

THE MOST POWERFUL AND INTELLIGENT LED LIGHTING FOR GROWING PLANTS ON THE MARKET! With these innovative LED fixtures, Dimlux sets the benchmark for horticultural lighting. With patented technology, advances in LED technology and an optimal thermal design, Dimlux Xtreme Series LED will be the preferred option, offering a significant return on investment for hobby and professional growers alike. Our adjustable spectrum for growing with PhytoVegSpec® +NIR Indoor combines complete control over the quality of light (spectral flexibility) and the quantity (intensity and DLI), ensuring uniform spreading and even distribution of light with extreme penetration into the crop.

1. +NIR (NEAR INFRA-RED) (NEAR INFRARED 700-750NM = FAR RED). This lighting fixture has an amount of far-red light that is used together with red light. In addition, the far-red light provides a more complete spectrum, increased photosynthesis, increased photon absorption and higher yield due to adapted morphology. Due to the additional far-red component, plants will become slightly taller than with the version without +NIR.
2. COLOUR IPS DISPLAY AND USER INTERFACE. The integration of a colour IPS screen and PhytoVegspec® makes the Xtreme series unique and special. Its special feature is that the spectra and the B:R (blue:red) ratio, or the amount of blue to red light, are displayed very accurately on the screen. Using this information, lighting recipes can be exchanged between growers and companies using values that are quantitatively measurable and therefore universally exchangeable. The values that can be controlled are the percentages of BLUE, GREEN and RED light, the B:R ratio, PPF, PPFD, DLI, power, the percentages of emitted light, plant temperature and air temperature.
3. BUILT-IN OR EXTERNAL CONTROL. The lighting fixture can operate entirely independently and even serve as the main unit in a group with other lighting fixtures. They can also be controlled by external devices such as the Dimlux Maxi Controller or other controllers. Since the lighting fixture can be updated via Wi-Fi, it is possible to work according to the latest trends in lighting strategy and supplement the spectrum by adding additional lighting fixtures.
4. DRIVERLESS DESIGN (ballast). The drivers that power the LEDs are integrated into the frame of the lighting fixture. Since high-voltage drivers are used, efficiency is particularly high and heat losses are therefore lower. This lower heat loss makes it possible to integrate the drivers into the frame.
5. TILTED LENSES WITH DEEP PENETRATION AND ULTRA-HIGH TRANSMITTANCE. The tilted LED bars are designed to provide the ideal balance between light penetration and its even spread. At the recommended height above the crop, uniformity higher than 95% can be achieved when multiple lighting fixtures are used. Because the light from the lenses is focused, less scattered light is lost on walls and walkways. The patented ultra-high-transmittance lens is internally shaped in such a way that the light rays that would normally be reflected back towards the LED (converted back into heat) now end up right next to the LED and are reflected.
6. ADDITIONAL LIGHT TUBE WITH FULL-COLOUR LEDs. Our lighting fixtures have unique additional lighting that is directed through lenses built into the light tube. The auxiliary lights consist of full-colour LEDs and serve as additional lighting, an alarm indicator, a plant-temperature indicator or night lighting, depending on the situation.
7. SMART PORTS 3X. The Xtreme series has 3 available Smart ports. These are universal communication ports with various connection options for a wide range of sensors, such as a Plant Temperature Sensor, an Air Temperature Sensor, CO₂ and humidity, as well as climate-control devices. Communication can be both analogue and digital through the Smart Protocol. It is possible to control up to 160 lighting fixtures via analogue communication and >1000 fixtures via the Smart Protocol.
8. DOPPLER RADAR PROXIMITY SENSOR. The built-in Doppler radar sensor can detect movement up to 3 metres away. This sensor is used, for example, to activate the screen and for automatic activation of (green) additional lighting at night. The intensity and colour of the additional lighting can be adjusted so that the room can be entered at night without disturbing the plants' rhythm. Because the night lighting switches on only when movement is detected, it will not unnecessarily illuminate areas where it is not needed. The night lighting can be set to different intensities and colours, such as blue, which appears to have less effect on the sleep rhythm than green light, but to which human vision is less sensitive. The sensor will also be used to automatically switch off UV rays when the additional fixtures are used, preventing eye and skin damage.

Brochure and instructions for use in English: here*, here* and here*

Full technical specifications:

• model: Xtreme Series 500W (+ NIR)
• full spectrum: adjustable PhytoVegspec® +NIR Indoor
• total light output (PPF 350-800nm): 1550μmol/s
• total photon efficacy (PPF 350-800nm): 2.9μmol/J
• power: 540W at 230-240V
• voltage: 120-277V AC, 50/60Hz
• beam angle: 90° × 120°
• mounting height above plants: 20-50cm
• optics: patented deep-penetration lens with ultra-high transmissivity
• supplementary light: patented 65k multicolour light tube
• proximity sensor: Doppler radar
• cooling: passive
• max. ambient temperature: 40°C
• control: built-in (via the display) or with the Dimlux Maxi Controller
• smart ports X3: plant temperature sensor, light sensor, interlink
• spectrum display with graphical user interface (control menu): 1.54" 65k-colour IPS
• THD: < 10%
• lifetime: > 50 000 hours
• water and dust resistance: IP65
• certification: CE, UL 8800, UL 1598 Wet Location, DLC
• warranty: 5 years
• dimensions: 84 x 81 x 6cm
• weight: 13.3kg

Secret Jardin CARRYIT ballast holder.

• Dimensions: 14cm x 43.3cm x 3.5cm
• Weight: 368g

Recommended for:

• ballast with dimensions: 11cm x 35cm

The CMH-to-E40 adapter connects a CDM / CMH lamp to an E40 socket.

White Lightite 2 m x 50 m is a three-layer white reflective film folded in the middle. It improves overall plant growth, increasing yields by reflecting emitted heat, which also leads to lower energy costs. The price is for a 50-metre roll.

• 100% lightproof
• thickness: 120μm
• width: 2 m
• length: 50 m

FOOD SAFE! PLANT SAFE!

Lumatek Dimmer Box 3-Pin PRO is an original manual dimmer designed to control compatible Lumatek LED lighting fixtures via a 3-pin control connector. It allows easy adjustment of light output in 25% – 50% – 75% – 100%, increments, without the need for an external controller. This is a practical solution for optimising light intensity throughout the different stages of plant development.

Lumatek Dimmer Box 3-Pin PRO was developed as an original accessory for Lumatek LED lighting systems. It connects directly to the 3-pin DIM port of compatible fixtures and enables fast, easy control of light intensity without the need for a digital control panel.

Using the mechanical switch, you can choose between several preset power levels—25%, 50%, 75% and 100%, allowing the lighting to be adapted to the plant development stage. Reducing light intensity is particularly useful during germination, rooting and early vegetative growth, when young plants do not need maximum light output.

The dimmer is compact, easy to install and requires no additional configuration. It simply connects to compatible LED lighting and is ready for use. It is suitable both as a replacement for the original dimmer and as a spare accessory.

Technical specifications

✔️ Manufacturer: Lumatek

✔️ Model: Dimmer Box 3-Pin PRO

✔️ Type: Manual dimmer for LED lighting

✔️ Connection: 3-pin connector

✔️ Power adjustment:

• OFF
• 25%
• 50%
• 75%
• 100%

Compatibility

Compatible with selected Lumatek LED lighting models, including:

✔️ Lumatek VF 90W LED

✔️ Lumatek VF 120W LED

✔️ Lumatek ATS 200W PRO (ATTIS)

✔️ Lumatek ATS 300W PRO 2.7-3.1

✔️ Lumatek ZEUS 465W Compact PRO

✔️ Lumatek ZEUS 465W PRO 2.3-3.1

✔️ Lumatek ZEUS 600W 2.3-3.1

✔️ Lumatek ZEUS 1000W 2.3-3.1

✔️ Other Lumatek models equipped with a 3-pin DIM input.

Benefits

✔️ Original Lumatek accessory

✔️ Easy adjustment of light output

✔️ Dimming levels: 25%, 50%, 75% and 100%

✔️ Plug & Play installation

✔️ No programming required

✔️ Compact and convenient to use

✔️ Suitable as a spare or replacement dimmer

✔️ Provides optimal light intensity for the different growth stages.

📋 Instructions for use

1. Disconnect the LED lighting fixture from the mains.
2. Connect the dimmer to the 3-pin DIM port of the lighting fixture.
3. Switch on the lighting fixture.
4. Select the desired power level—25%, 50%, 75% or 100%.
5. If necessary, adjust the intensity according to the plant development stage.

💡 Urban Botaniks tip: Use lower lighting levels (25–50%) during germination and rooting, increase to 75% during vegetative growth, and use 100% power during flowering, when plants have the highest light requirements.