LED Lighting

Agrolite QB 730W 3.0 is a high-efficiency LED lighting fixture from a new generation, designed for professional plant cultivation throughout the entire life cycle. With an impressive efficacy of 3.0 μmol/J, a PPF of 2190 μmol/s and innovative Balanced Impact Distribution (BID) technology, the fixture provides even light distribution across an area of up to 1.5 × 1.5 metres, without creating hot spots.

LED Agrolite QB 730W 3.0 BID is developed for growers seeking maximum yield, high energy efficiency and excellent coverage across the entire growing area. Thanks to Balanced Impact Distribution (BID) technology, the LEDs are positioned strategically toward the edges of the panel, enabling much more even illumination of plants and eliminating light "hot spots". This leads to better light penetration into the plant canopy and more uniform development of every part of the crop.

The lighting fixture uses a full spectrum with a colour temperature of 3425K, supplemented by 180 SMD3030 Red (660 nm) diodes. This combination supports both vigorous vegetative growth and intensive flowering and fruiting. The red spectrum stimulates photosynthesis and contributes to denser flowers and higher yield.

QB 730W features an integrated dimmable driver and several power levels (40%, 60%, 80%, 100% and EXT mode), allowing the intensity to be adjusted to the plants' stage of development. It is also equipped with RJ11 ports for 0-10V control, enabling connection to external controllers and professional automation systems.

With an operating life of up to 60 000 hours, Agrolite QB 730W is designed for long-term, reliable operation while maintaining low running costs and high efficiency throughout its lifetime.

Technical specifications

✔️ Manufacturer: Agrolite

✔️ Model: QB 730W 3.0 BID

✔️ Power: 730W

✔️ Efficacy: 3.0 μmol/J

✔️ PPF: 2190 μmol/s

✔️ Colour temperature: 3425K

✔️ Red spectrum: 180 × SMD3030 Red (660 nm)

✔️ Power supply: 220–240V / 50–60Hz

✔️ Input voltage range: 175–264V

✔️ Input current: 3.0 – 3.32 A

✔️ Light coverage: 1.5 × 1.5 m

✔️ Beam angle: 120°

✔️ Power adjustment:

• OFF
• 40%
• 60%
• 80%
• 100%
• EXT mode

✔️ Control: RJ11 In/Out (0-10V Dimming)

✔️ Dimensions: 1105 × 1033 × 48 mm

✔️ Weight: 8.5 kg

✔️ Expected lifespan: 60 000 hours

📦 The kit includes

✔️ Agrolite QB 730W 3.0 BID LED grow light

✔️ Built-in dimmable driver

✔️ Power cable

✔️ Hanging kit

✔️ User manual

Contents may vary by batch and distributor.

Benefits

✔️ Exceptionally high efficiency – 3.0 μmol/J

✔️ Professional coverage up to 1.5 × 1.5 m

✔️ BID technology for even illumination

✔️ Reduces hot spots

✔️ Suitable for the full growing cycle

✔️ Enhanced red spectrum for better flowering

✔️ Built-in dimmer with several power levels

✔️ External control option via RJ11

✔️ Low consumption relative to light output

✔️ Long service life – up to 60 000 hours

Application

Suitable for:

• Grow tents

• Grow rooms

• Greenhouses

• Mother plants

• Vegetative growth

• Flowering

• Vegetable crops

• Herbs and spices

• Ornamental plants

• Professional and hobby growing

📏 Recommended mounting height

Vegetative growth: 70 – 100 cm

Flowering: 40 – 60 cm

These distances allow maximum use of BID technology and provide optimal light intensity without the risk of light stress.

💡 Advice from Urban Botaniks: If you use a controller with 0–10V control, you can automatically adjust light intensity throughout the different stages of plant development, further optimising electricity consumption and improving the final result. 🌱💡

Introducing the smartest, most powerful and most efficient LED grow light on the market! DIMLUX XTREME SERIES LED 750W+NIR.

Dimlux Xtreme Series LED 750W + NIR produces ultra-high levels of PPFD at 2317μmol/s, evenly distributed across a 1.5 x 1.5m area. It emits a full spectrum for growing, consistently producing crops with high yields and high quality. Dimlux Xtreme Series LED 750W + NIR can be dimmed without loss of efficiency; its spectrum and power can be programmed according to the time of day and the growth stage of the crop.

• power: 799W at 230-240V
• total light output (PPF 350-800nm): 2317μmol/s
• total photon efficacy (PPF 350-800nm): 2.9μmol/J
• coverage area: 1.5 x 1.5m
• optics: patented lens with deep penetration and ultra-high transmittance
• auxiliary light: patented multicolour light tube 65k
• built-in Doppler proximity sensor
• control: built-in (via the display) or with the Dimlux Maxi Controller
• smart ports X3: plant temperature sensor, light sensor, interlink

THE MOST POWERFUL AND INTELLIGENT LED GROW LIGHT ON THE MARKET! With these innovative LED fixtures, Dimlux sets the standard for horticultural lighting. With patented technology, advances in LED technology and optimal thermal design, Dimlux Xtreme Series LED will be the preferred choice, offering a significant return on investment for amateur and professional growers alike. Our adjustable spectrum for growing with PhytoVegSpec® +NIR Indoor combines full control over the quality of light (spectral flexibility) and the quantity (intensity and DLI), ensuring uniform spread and uniform distribution of light with extreme penetration into the crop.

1. +NIR (NEAR INFRA-RED) (NEAR INFRARED 700-750NM = FAR RED). This fixture has an amount of far-red light that is used together with red light. In addition, far-red light provides a more complete spectrum, increased photosynthesis, increased photon absorption and higher yield due to adapted morphology. Due to the additional far-red component, plants will become slightly taller than with the version without +NIR.
2. COLOUR IPS DISPLAY AND USER INTERFACE. The incorporation of a colour IPS screen and PhytoVegspec® makes the Xtreme series unique and special. Its distinguishing feature is that the spectra and B:R (blue:red) ratio, or the amount of blue to red light, are displayed very accurately on the screen. Using this information, light recipes can be exchanged between growers and companies using values that are quantitatively measurable and therefore universally transferable. The values that can be controlled are the percentages of BLUE, GREEN and RED light, the B:R ratio, PPF, PPFD, DLI, power, emitted-light percentages, plant temperature and air temperature.
3. BUILT-IN OR EXTERNAL CONTROL. The fixture can operate completely independently and can even act as the master in a group with other fixtures. They can also be controlled by external devices such as the Dimlux Maxi Controller or other controllers. Since the fixture can be updated via Wi-Fi, it is possible to follow the latest trends in light strategy and supplement the spectrum by adding additional fixtures.
4. DRIVERLESS DESIGN (ballast). The drivers that control the LEDs are integrated into the frame of the fixture. Because high-voltage drivers are used, efficiency is particularly high and therefore heat losses are lower. This lower heat loss makes it possible to integrate the drivers into the frame.
5. ANGLED LENSES WITH DEEP PENETRATION AND ULTRA-HIGH TRANSMITTANCE. The angled LED bars are designed to provide the ideal balance between light penetration and uniform distribution. At the recommended height above the crop, uniformity above 95% can be achieved when multiple fixtures are used. Because light from the lenses is focused, less scattered light is lost on walls and walkways. The patented ultra-high-transmittance lens is internally shaped so that the light rays that would normally be reflected back toward the LED (and converted back into heat) now terminate next to the LED and are reflected.
6. AUXILIARY LIGHT TUBE WITH FULL-COLOUR LEDs. Our fixtures have unique auxiliary lighting directed through lenses integrated into the light tube. The auxiliary lights consist of full-colour LEDs and serve as supplementary lighting, alarm indication, a plant-temperature indicator or night lighting, depending on the situation.
7. 3X SMART PORTS. The Xtreme series has 3 available Smart ports. These are universal communication ports with various connection options for a wide range of sensors, such as plant-temperature sensors, air-temperature, CO₂ and humidity sensors, and climate-control devices. Communication can be both analogue and digital through Smart Protocol. It is possible to control up to 160 fixtures through analogue communication and >1000 fixtures through Smart Protocol.
8. DOPPLER RADAR PROXIMITY SENSOR. The built-in Doppler radar sensor can detect movement at a distance of up to 3 metres. This sensor is used, for example, to activate the display and for automatic activation of the (green) auxiliary lighting at night. The intensity and colour of the auxiliary lighting can be adjusted so that the room can be entered at night without disturbing the plants' rhythm. Because night lighting switches on only when there is movement, it will not unnecessarily illuminate areas where it is not needed. Night lighting can be set to different intensities and colours, such as blue, which appears to have less effect on sleep rhythm than green light but to which human vision is less sensitive. The sensor will also be used to automatically switch off UV rays when auxiliary fixtures are used, to prevent eye and skin damage.

Brochure and instructions for use in English: here*, here* and here*

Full technical specifications:

• model: Xtreme Series 750W (+ NIR)
• full spectrum: adjustable PhytoVegspec® +NIR Indoor
• total light output (PPF 350-800nm): 2317μmol/s
• total photon efficacy (PPF 350-800nm): 2.9μmol/J
• power: 799W at 230-240V
• voltage: 120-277V AC, 50/60Hz
• beam angle: 90° × 120°
• installation height above plants: 30-65cm
• optics: patented deep-penetration lens with ultra-high transmissivity
• supplementary light: patented 65k multicolour light tube
• proximity sensor: Doppler radar
• cooling: passive
• max. ambient temperature: 40°C
• control: built-in (via the display) or with the Dimlux Maxi Controller
• smart ports X3: plant temperature sensor, light sensor, interlink
• spectrum display with graphical user interface (control menu): 1.54" 65k-colour IPS
• THD: < 10%
• lifetime: > 50 000 hours
• water and dust resistance: IP65
• certification: CE, UL 8800, UL 1598 Wet Location, DLC
• warranty: 5 years
• dimensions: 120 x 110 x 6cm
• weight: 19.3kg

Vanguard Hydroponics LED Cosmos 120W is an LED lamp for indoor plant cultivation. The emitted light has a full spectrum, making it ideal for use in all stages of plant development—from germination, seedlings, cloning or vegetative growth, through to flowering / fruiting.

• lower operating costs and higher-quality yields
• ideal for all stages of cultivation
• best value for money
• full spectrum
• fanless, noiseless
• coverage area: 70 x 70 cm

Technical specifications:

• power: 120 W
• voltage: 220-240 V, 50-60 Hz
• total light output (PPF) at 25 cm from plant tops: 480 μmol/s
• efficacy: 2.4 μmol/J
• full spectrum
• suitable for: growth and flowering
• coverage area: 70 x 70 cm
• LED chips: 3000K – 158 pcs., 5000K – 80 pcs., 660nm – 34 pcs., 395nm – 2 pcs., 730nm – 2 pcs. Sanan
• dimmer modes: VEG Stage: Turn Off RED & IR, BLOOM Stage: Turn On RED & IR
• dimensions: 35 x 35 x 5 cm
• product weight: 1.35 kg
• service life: 50 000 hours
• warranty: 2 years

Vanguard Hydroponics LED Cosmos 300W is an LED grow light for indoor cultivation. The emitted light has a full spectrum, making it ideal for use throughout all stages of plant development – from germination, seedling, cloning or vegetative growth, through to flowering / fruiting.

• lower operating costs and higher-quality yields
• ideal for all stages of cultivation
• best value for money
• full spectrum
• fanless, silent
• coverage area: 100 x 100 cm

Technical specifications:

• power: 300 W
• voltage: 220-240 V, 50-60 Hz
• total light output (PPF) at 25 cm from the top of the plants: 720 μmol/s
• efficacy: 2.4 μmol/J
• full spectrum
• suitable for: growth and flowering
• coverage area: 100 x 100 cm
• LED chips: 3000K – 395 pcs., 5000K – 195 pcs., 660nm – 86 pcs., 395nm – 4 pcs., 730nm – 4 pcs. Sanan
• dimmer modes: VEG Stage: Turn Off RED & IR, BLOOM Stage: Turn On RED & IR
• dimensions: 44.5 x 44.5 x 7 cm
• product weight: 3.55 kg
• service life: 50 000 hours
• warranty: 2 years

🔹LUMii XLED Controller – EU Plug is a high-quality controller designed to control LED lighting with a 0-10V signal. It allows precise adjustment of the photoperiod and light intensity, as well as sunrise and sunset simulation, ensuring optimal conditions for plant growth.

🔹 Detailed specifications:

Manufacturer: LUMii

Model: XLED Controller – EU Plug

Signal type: 0 – 10 V

Number of channels: 1

Maximum number of connected devices: 25 LUMii XLEDv6 680W LED lights

Output voltage: 0 – 10 V ± 0.1 V

Adapter input voltage: 120 – 240 V AC

Controller input voltage: 12 V DC, 1.0 A

Operating temperature: 0°C – 35°C

Operating humidity: up to 80% RH, non-condensing

Protection rating: IP20

Installation: Wall-mounting or hanging option

Included accessories: EU plug adapter

🔹 Recommendations and instructions for use:

Connect the controller to the power source using the supplied adapter.

Use an RJ12 cable or connect directly to the push-in terminals to connect to the LED lights.

Set the desired photoperiod, light intensity, and sunrise and sunset simulation parameters via the 5-button interface.

The controller will control the connected devices, ensuring optimal conditions for plant growth.

✅ Benefits of use:

Precise control: Allows adjustment of the photoperiod and light intensity, as well as sunrise and sunset simulation.

Multiple devices: Can control up to 25 connected LED lights.

Ease of use: Intuitive 5-button interface for easy configuration.

Flexibility: Compatible with any LED lighting that accepts a 0-10V signal.

HortiLight PWM LED Controller is an intelligent controller for managing LED lighting fixtures with PWM (Pulse Width Modulation) control. It enables precise adjustment of light output, automatic programming of lighting modes and remote control, making it an excellent solution for professional and hobby plant-growing systems. It is compatible with LED drivers Mean Well, Inventronics, Osram, Sosen and others that support PWM control.

HortiLight PWM LED Controller is designed to provide full control over LED lighting and simplify the management of the different stages of plant development. Instead of manually switching, turning off and adjusting the lighting, the controller automates the entire process through preset programs and a timer.

The controller allows smooth adjustment of light output from 0% to 100%, allowing the lighting to be adapted to the plant development stage – from germination and rooting to intensive vegetative growth and flowering. It also supports different lighting schedules, which can be programmed according to crop needs.

Its main functions include measuring ambient temperature, enabling better control of conditions in the growing area. It can also be operated by remote control, providing added convenience for daily work.

The controller is compatible with LED fixtures using PWM control and is recommended to be ordered together with compatible lighting to ensure the correct connector type and trouble-free operation.

Technical specifications

✔️ Manufacturer: HortiLight

✔️ Type: PWM LED controller

✔️ Control: PWM (Pulse Width Modulation)

✔️ Lighting adjustment: 0–100%

✔️ Timer function

✔️ Programmable lighting modes

✔️ Ambient temperature measurement

✔️ Remote control

✔️ Plug & Play installation

✔️ Compatible with PWM LED drivers from Mean Well, Inventronics, Osram, Sosen and others.

 Compatibility

The controller is compatible with LED fixtures equipped with PWM control, including:

✔️ HortiLight F50

✔️ HortiLight Spreader

✔️ HortiLight ScrogMaster 800

✔️ Many other LED fixtures with a PWM input and compatible connector.

📦 The kit includes

✔️ 1 × HortiLight PWM LED Controller

✔️ 1 × Remote control

✔️ 1 × Timer

✔️ 1 × User manual.

Benefits

✔️ Precise light-output adjustment from 0 to 100%

✔️ Automatic on/off timer

✔️ Programmable lighting schedules

✔️ Ambient temperature measurement

✔️ Remote control

✔️ Easy Plug & Play installation

✔️ Suitable for professional and home systems

✔️ Compatible with leading PWM-controlled LED drivers.

Application

Suitable for:

• LED grow lighting

• Grow boxes

• Greenhouses

• Nurseries

• Vertical farms

• Vegetative growth

• Flowering

• Home and professional plant cultivation.

📋 Instructions for use

1. Connect the controller to the compatible LED light fixture via the PWM connector.
2. Connect the device to the power supply.
3. Set the desired lighting intensity.
4. Program the on/off times using the timer.
5. If necessary, use the remote control to change settings.
6. Monitor the room temperature and adapt the lighting schedule to the plants' needs.

⚠️ Important: The controller is compatible only with LED fixtures and drivers that support PWM control. Before purchase, check the type of control connector and compatibility with your lighting.

💡 Tip from Urban Botaniks: Use lower light intensity during germination and rooting, then gradually increase output during vegetative growth and flowering. This reduces plant stress and optimises development.

Vanguard Hydroponics LED Cosmos 480W is an LED grow light for indoor plants. Its emitted light has a full spectrum, making it ideal for use in all phases of plant development — from germination, seedlings, cloning or vegetative growth, through to flowering / fruiting.

• lower operating costs and higher-quality yields
• ideal for all stages of growing
• best value for money
• full spectrum
• fanless, silent
• coverage area: 120 x 120 cm

Technical specifications:

• power: 480 W
• voltage: 220-240 V, 50-60 Hz
• total light output (PPF) at 25 cm from the top of the plants: 1166 μmol/s
• efficacy: 2.4 μmol/J
• full spectrum
• suitable for: growth and flowering
• coverage area: 120 x 120 cm
• LED chips: 3000K - 616 pcs., 5000K - 300 pcs., 660nm - 136 pcs., 395nm - 8 pcs., 730nm - 8 pcs. Sanan
• dimmer modes: VEG Stage: Turn Off RED & IR, BLOOM Stage: Turn On RED & IR
• dimensions: 60 x 60 x 8 cm
• package dimensions: 61.5 x 61.5 x 9 cm
• product weight: 6.1 kg
• service life: 50 000 hours
• warranty: 2 years

HortiLight LED Grow Bar Light G5 30W is an energy-efficient LED bar designed for supplementary lighting of plants throughout all stages of development. Thanks to its compact design and low heat output, it can be installed close to plants and is suitable for mini greenhouses, shelving, propagation areas, vertical systems and as a complement to primary lighting.

HortiLight LED Bar 162 is designed for growers who want to improve illumination in specific areas or provide even light distribution across plants. Thanks to its compact dimensions, the LED bar is suitable for installation under shelves, in propagators, on racks or as side lighting in grow rooms.

LED technology delivers low energy consumption, a long service life and minimal heat output. This allows the light to be placed close to plants without the risk of overheating or scorching the foliage.

The bar emits a full-spectrum light suitable for both vegetative growth and flowering. It can be used on its own for small plants or as supplementary lighting alongside more powerful LED systems to improve light penetration into the lower parts of plants.

The light is designed for easy installation and can be linked to other compatible LED bars (Daisy Chain), allowing larger lighting systems to be built to suit the needs of the space.

Technical specifications

✔️ Manufacturer: HortiLight

✔️ Model: LED Bar 162

✔️ Type: LED plant bar

✔️ Power consumption: 35W

✔️ Light spectrum: Growth spectrum

✔️ Intended use: Vegetative growth

✔️ LED technology

✔️ Low heat output

✔️ Passive cooling

✔️ Daisy Chain connectivity (with compatible models)

✔️ Suitable for horizontal or vertical installation

✔️ CE and RoHS certification.

📦 The kit includes

✔️ 1 × HortiLight LED Bar 162

✔️ Mounting components

✔️ User manual.

📋 Instructions for use

1. Install the LED bar above or beside the plants using the included mounting components.
2. If desired, connect several LED bars into one system via Daisy Chain.
3. Position the lighting at a suitable distance according to the crop's requirements.
4. Periodically clean the housing with a soft dry cloth to ensure maximum efficiency.

The Photontek SQ300W Pro LED is the perfect compact and powerful LED grow light for tight spaces, with coverage of up to 100 x 100 cm.

Producing very high PPF (photosynthetic photon flux) levels of 816 µmol/s and photon efficacy (fixture efficiency) of 2.7 µmol/J, the SQ300W Pro LED creates homogeneous light distribution close to the plant canopy, delivering exceptional results in indoor growing areas with a 100 x 100 cm coverage area.

• high fixture efficacy 2.7 µmol/J
• high PPF (photosynthetic photon flux) 816 µmol/s
• optimized and uniform light distribution
• compact design, ideal for growing in an area of 100 x 100 cm
• balanced full light spectrum
• fully dimmable (power adjustment OFF / 25% / 50% / 75% / 100%)
• easy to use and set up

Technical specifications:​

• input voltage: 120-277V, 50-60Hz
• input power (100%): 310W
• PPF (photosynthetic photon flux): 816 µmol/s
• efficacy: 2.7 µmol/J
• coverage area: 100 x 100 cm
• light source: 4000K white, 660nm red and 730nm far-red diodes
• total number of diodes: white 576; red 24; far-red 24
• light spectrum: full spectrum
• light distribution: 120°
• dimming capability: with a dimmer 0-10V (included)
• operating modes: OFF / 25% / 50% / 75% / 100%
• water resistance: IP65
• lifetime: 60 000 hours
• weight: 5.2 kg
• dimensions: 56.7 x 56.7 x 7.2 cm
• Warranty: 3 years

What's included in the set:

• 1 x SQ300W Pro LED grow light with driver
• 1 x Power cord with NEMA 5-15P 120V plug
• 1 x 0-10V light dimmer + Velcro
• 2 x Metal cable hangers
• 1 x Manual

T-Junction + 5m Lumatek T-Junction + 5m control cable. This cable component is used to connect Lumatek Zeus LED light fixtures together in series, so they can be externally controlled with LUMATEK Digital Panel PLUS 2.0 (HID+LED). The set includes:

• T-Junction T-Junction (3 x LLT M12 connectors - 2x female, 1x male)
• 5 m control cable with H05RN-F 2x 0.5mm, with LLT M12 male connector and LLT M12 female connector

Lumatek Zeus LED grow lights and LED accessories: connection options for the various models in English here*.

Lumatek Daisy-Chain 5m. Control cable is a daisy-chain cable for your controllable LUMATEK LED lighting fixtures, providing a stable, precise connection without interference.

• length: 5m

Instructions for use: Simply connect the self-locking M12 male plug to the Signal Out output and the self-locking M12 female plug to the Signal In input of the next lighting fixture.

Lumatek Zeus LED fixtures and LED accessories: vconnection options for the various models in English here*.

Technical / test data:

• length: 5m.
• The withstand voltage between conductor and insulation is 800 VAC, 2 mA, test time 60 S; no breakdown or leakage occurs.
• Temperature resistance: 80℃
• Operating temperature: -20 - 105℃
• Storage temperature: -25 - 105℃
• IP65 protection
• Complies with RoHS*

Introducing the smartest, most powerful and most efficient LED lighting on the market! DIMLUX XTREME SERIES LED 500W+NIR. 

Dimlux Xtreme Series LED 500W + NIR produces ultra-high levels of PPFD of 1550μmol/s, evenly distributed over an area of 1.2 x 1.2m. It emits a full spectrum for cultivation, consistently producing crops with high yields and high quality. The Dimlux Xtreme Series LED 500W + NIR can be dimmed without a loss of efficiency; the spectrum and power can be programmed according to the time of day and growth stage of the crop being cultivated.

• power: 540W at 230-240V
• total light output (PPF 350-800nm): 1550μmol/s
• total photon efficacy (PPF 350-800nm): 2.9μmol/J
• coverage area: 1.2 x 1.2m
• optics: patented lens with deep penetration and ultra-high transmittance
• additional light: patented multicolour 65k light tube
• built-in Doppler proximity sensor
• control: built-in (via the display) or with the Dimlux Maxi Controller
• smart ports X3: plant temperature sensor, light sensor, interlink

THE MOST POWERFUL AND INTELLIGENT LED LIGHTING FOR GROWING PLANTS ON THE MARKET! With these innovative LED fixtures, Dimlux sets the benchmark for horticultural lighting. With patented technology, advances in LED technology and an optimal thermal design, Dimlux Xtreme Series LED will be the preferred option, offering a significant return on investment for hobby and professional growers alike. Our adjustable spectrum for growing with PhytoVegSpec® +NIR Indoor combines complete control over the quality of light (spectral flexibility) and the quantity (intensity and DLI), ensuring uniform spreading and even distribution of light with extreme penetration into the crop.

1. +NIR (NEAR INFRA-RED) (NEAR INFRARED 700-750NM = FAR RED). This lighting fixture has an amount of far-red light that is used together with red light. In addition, the far-red light provides a more complete spectrum, increased photosynthesis, increased photon absorption and higher yield due to adapted morphology. Due to the additional far-red component, plants will become slightly taller than with the version without +NIR.
2. COLOUR IPS DISPLAY AND USER INTERFACE. The integration of a colour IPS screen and PhytoVegspec® makes the Xtreme series unique and special. Its special feature is that the spectra and the B:R (blue:red) ratio, or the amount of blue to red light, are displayed very accurately on the screen. Using this information, lighting recipes can be exchanged between growers and companies using values that are quantitatively measurable and therefore universally exchangeable. The values that can be controlled are the percentages of BLUE, GREEN and RED light, the B:R ratio, PPF, PPFD, DLI, power, the percentages of emitted light, plant temperature and air temperature.
3. BUILT-IN OR EXTERNAL CONTROL. The lighting fixture can operate entirely independently and even serve as the main unit in a group with other lighting fixtures. They can also be controlled by external devices such as the Dimlux Maxi Controller or other controllers. Since the lighting fixture can be updated via Wi-Fi, it is possible to work according to the latest trends in lighting strategy and supplement the spectrum by adding additional lighting fixtures.
4. DRIVERLESS DESIGN (ballast). The drivers that power the LEDs are integrated into the frame of the lighting fixture. Since high-voltage drivers are used, efficiency is particularly high and heat losses are therefore lower. This lower heat loss makes it possible to integrate the drivers into the frame.
5. TILTED LENSES WITH DEEP PENETRATION AND ULTRA-HIGH TRANSMITTANCE. The tilted LED bars are designed to provide the ideal balance between light penetration and its even spread. At the recommended height above the crop, uniformity higher than 95% can be achieved when multiple lighting fixtures are used. Because the light from the lenses is focused, less scattered light is lost on walls and walkways. The patented ultra-high-transmittance lens is internally shaped in such a way that the light rays that would normally be reflected back towards the LED (converted back into heat) now end up right next to the LED and are reflected.
6. ADDITIONAL LIGHT TUBE WITH FULL-COLOUR LEDs. Our lighting fixtures have unique additional lighting that is directed through lenses built into the light tube. The auxiliary lights consist of full-colour LEDs and serve as additional lighting, an alarm indicator, a plant-temperature indicator or night lighting, depending on the situation.
7. SMART PORTS 3X. The Xtreme series has 3 available Smart ports. These are universal communication ports with various connection options for a wide range of sensors, such as a Plant Temperature Sensor, an Air Temperature Sensor, CO₂ and humidity, as well as climate-control devices. Communication can be both analogue and digital through the Smart Protocol. It is possible to control up to 160 lighting fixtures via analogue communication and >1000 fixtures via the Smart Protocol.
8. DOPPLER RADAR PROXIMITY SENSOR. The built-in Doppler radar sensor can detect movement up to 3 metres away. This sensor is used, for example, to activate the screen and for automatic activation of (green) additional lighting at night. The intensity and colour of the additional lighting can be adjusted so that the room can be entered at night without disturbing the plants' rhythm. Because the night lighting switches on only when movement is detected, it will not unnecessarily illuminate areas where it is not needed. The night lighting can be set to different intensities and colours, such as blue, which appears to have less effect on the sleep rhythm than green light, but to which human vision is less sensitive. The sensor will also be used to automatically switch off UV rays when the additional fixtures are used, preventing eye and skin damage.

Brochure and instructions for use in English: here*, here* and here*

Full technical specifications:

• model: Xtreme Series 500W (+ NIR)
• full spectrum: adjustable PhytoVegspec® +NIR Indoor
• total light output (PPF 350-800nm): 1550μmol/s
• total photon efficacy (PPF 350-800nm): 2.9μmol/J
• power: 540W at 230-240V
• voltage: 120-277V AC, 50/60Hz
• beam angle: 90° × 120°
• mounting height above plants: 20-50cm
• optics: patented deep-penetration lens with ultra-high transmissivity
• supplementary light: patented 65k multicolour light tube
• proximity sensor: Doppler radar
• cooling: passive
• max. ambient temperature: 40°C
• control: built-in (via the display) or with the Dimlux Maxi Controller
• smart ports X3: plant temperature sensor, light sensor, interlink
• spectrum display with graphical user interface (control menu): 1.54" 65k-colour IPS
• THD: < 10%
• lifetime: > 50 000 hours
• water and dust resistance: IP65
• certification: CE, UL 8800, UL 1598 Wet Location, DLC
• warranty: 5 years
• dimensions: 84 x 81 x 6cm
• weight: 13.3kg

Lumatek Dimmer Box 3-Pin PRO is an original manual dimmer designed to control compatible Lumatek LED lighting fixtures via a 3-pin control connector. It allows easy adjustment of light output in 25% – 50% – 75% – 100%, increments, without the need for an external controller. This is a practical solution for optimising light intensity throughout the different stages of plant development.

Lumatek Dimmer Box 3-Pin PRO was developed as an original accessory for Lumatek LED lighting systems. It connects directly to the 3-pin DIM port of compatible fixtures and enables fast, easy control of light intensity without the need for a digital control panel.

Using the mechanical switch, you can choose between several preset power levels—25%, 50%, 75% and 100%, allowing the lighting to be adapted to the plant development stage. Reducing light intensity is particularly useful during germination, rooting and early vegetative growth, when young plants do not need maximum light output.

The dimmer is compact, easy to install and requires no additional configuration. It simply connects to compatible LED lighting and is ready for use. It is suitable both as a replacement for the original dimmer and as a spare accessory.

Technical specifications

✔️ Manufacturer: Lumatek

✔️ Model: Dimmer Box 3-Pin PRO

✔️ Type: Manual dimmer for LED lighting

✔️ Connection: 3-pin connector

✔️ Power adjustment:

• OFF
• 25%
• 50%
• 75%
• 100%

Compatibility

Compatible with selected Lumatek LED lighting models, including:

✔️ Lumatek VF 90W LED

✔️ Lumatek VF 120W LED

✔️ Lumatek ATS 200W PRO (ATTIS)

✔️ Lumatek ATS 300W PRO 2.7-3.1

✔️ Lumatek ZEUS 465W Compact PRO

✔️ Lumatek ZEUS 465W PRO 2.3-3.1

✔️ Lumatek ZEUS 600W 2.3-3.1

✔️ Lumatek ZEUS 1000W 2.3-3.1

✔️ Other Lumatek models equipped with a 3-pin DIM input.

Benefits

✔️ Original Lumatek accessory

✔️ Easy adjustment of light output

✔️ Dimming levels: 25%, 50%, 75% and 100%

✔️ Plug & Play installation

✔️ No programming required

✔️ Compact and convenient to use

✔️ Suitable as a spare or replacement dimmer

✔️ Provides optimal light intensity for the different growth stages.

📋 Instructions for use

1. Disconnect the LED lighting fixture from the mains.
2. Connect the dimmer to the 3-pin DIM port of the lighting fixture.
3. Switch on the lighting fixture.
4. Select the desired power level—25%, 50%, 75% or 100%.
5. If necessary, adjust the intensity according to the plant development stage.

💡 Urban Botaniks tip: Use lower lighting levels (25–50%) during germination and rooting, increase to 75% during vegetative growth, and use 100% power during flowering, when plants have the highest light requirements.