Hydroponic and Aeroponic Systems

The hydroponic vertical tower with 7 levels is a practical system for growing plants without soil. It enables efficient use of space while providing optimal conditions for the development of different types of vegetables, herbs and leafy crops. It is suitable for home use as well as greenhouses or small urban gardens.

Construction: a vertical system with 7 separate levels, allowing multiple plants to be grown in a small area.

Hydroponic principle: plants grow without soil, receiving nutrients through a circulating nutrient solution.

Material: made from durable, lightweight materials (plastic), suitable for long-term use in contact with water and nutrient solutions.

Space saving: the vertical design enables maximum use of limited space, making it suitable for balconies, terraces, greenhouses and indoor spaces.

Suitable crops: ideal for lettuce, herbs, spinach, rocket, strawberries and other compact plants.

Modular design: the levels are arranged to ensure good water circulation and even distribution of the nutrient solution.

The kit includes: 1x sponge for germinating your seeds; 1x seed tray; 1x timer; 1x plug-in adapter with dimmer; 1x water pump matched to the system's flow rate; 1x top cover; 1x top part that distributes the water solution; 7x tier sections, with 4 outlets for baskets; 1x cover for the housing section; 1x water-solution container; 4x short bolts with nuts; 2x long bolts; 28x hydroponic baskets.

The 13mm shut-off valve for AutoPot is a very useful accessory. It can be added at the end of the layout when using hose (13mm tubing). You can open the valve and allow the lines to be flushed, removing sediment or limescale buildup that can occur over time. This takes only a few minutes and should be done just once every few weeks.

AutoPot 1Pot Accessory Pack is an original set of spare and expansion components for AutoPot 1Pot systems with a 6 mm pipe system. The set includes the latest-generation AQUAvalve5, together with all essential parts needed to replace worn components or add another watering point to an existing AutoPot system.

AutoPot 1Pot Accessory Pack is a practical solution for maintaining and expanding AutoPot systems. Whether you wish to replace worn components or add another pot to an existing installation, this set contains all the essential elements needed to connect and operate a new module correctly.

At the heart of the set is the AQUAvalve5 – AutoPot's latest-generation automatic valve. It regulates the supply of water and nutrient solution to plants without electricity, pumps or timers. Thanks to its gravity-fed operating principle, the valve delivers water only when plants need it, allowing the growing medium to go through natural wetting and drying cycles.

The set also includes the Root Control Disc, which prevents roots from reaching the valve, and the Matrix Disc, which provides even water distribution at the base of the pot. The included tubing, connectors and grommet allow quick connection to the existing 9 mm AutoPot system.

All components are original AutoPot spare parts, made for full compatibility with 1Pot systems using 6 mm tubing.

Technical specifications

✔️ Manufacturer: AutoPot

✔️ Type: AutoPot 1Pot accessory pack

✔️ Compatibility: AutoPot 1Pot (9 mm)

✔️ Valve: AQUAvalve5

✔️ Pipe size: 9 mm

✔️ Original AutoPot replacement components

✔️ Suitable for system expansion or repair.

📦 The kit includes

✔️ 1 × AQUAvalve5

✔️ 1 × Matrix Disc

✔️ 1 × Root Control Disc

✔️ 1 × 6 mm pipe (1 m)

✔️ 1 × 6 mm T-connector

✔️ 1 × 16–6 mm cross connector

✔️ 1 × 6 mm Top Hat seal (rubber grommet)

✔️ Installation instructions.

Benefits

✔️ Original AutoPot components

✔️ Includes the new-generation AQUAvalve5

✔️ Easy installation without specialised tools

✔️ Suitable for system repair and expansion

✔️ Ensures reliable operation of the gravity-fed irrigation system

✔️ Compatible with all AutoPot 1Pot systems with 9 mm pipework

✔️ High-quality, long-lasting components.

Application

Suitable for:

• AutoPot 1Pot systems

• Replacement of worn components

• Expansion of existing AutoPot installations

• Automatic gravity-fed irrigation

• Home and professional plant growing.

📋 Instructions for use

1. Turn off the water supply to the AutoPot system.
2. Install the AQUAvalve5 in the relevant tray according to the instructions.
3. Place the Root Control Disc and Matrix Disc at the bottom of the pot.
4. Connect the supplied 6 mm pipe to the existing irrigation line using the included connectors.
5. Check all connections for a proper seal.
6. Fill the reservoir and test system operation before placing the plants.

⚠️ Important: The kit is intended for AutoPot 1Pot systems with 6 mm pipework. Before purchasing, check which type of pipe system you use to ensure full compatibility.

💡 Urban Botaniks tip: When replacing the AQUAvalve, it is advisable to replace the Root Control Disc at the same time, especially if the system has operated for several seasons. This will ensure trouble-free operation and prevent roots from reaching the valve.

AQUAbox Straight is designed to supply water and nutrients to plants of any type and size grown directly in soil.
AQUAbox Straight is attached to a single capillary wick that distributes water below the soil over an area of up to 4 square metres. With an AQUAvalve valve at its base, AQUAbox Straight draws from the water supply (water reservoir) only as much as the plants need, ensuring incredibly efficient water use. Plant roots instinctively grow towards the water source, attaching to the capillary wicks below soil level.

The AQUAbox contains the AQUAvalve valve technology but is designed to be placed directly in the ground; the capillary mat draws water from the AQUAbox and distributes it through the soil below.
The AQUAbox keeps your plants watered for days or weeks at a time, making it the ideal irrigation solution for weekends, holidays and year-round watering.

AutoPot AQUAbox Straight includes:

• 1x AQUAbox Straight Body
• 1x AQUAvalve valve
• 1x mini spirit level
• 1x 13mm–4mm built-in filter
• 1x AQUAbox Straight capillary mat
• 2m of 4mm tubing
• 1x full instructions

Tip: Make sure the capillary strips touch the bottom of the AQUAbox on both sides of the AQUAvalve valve after they have been rolled up.

Autopot propagation tray, with the option to connect it to an automatic irrigation system.

• Height: 28 cm
• Length: 120 cm
• Width: 55 cm

• Transparent lid with ventilation openings
• 2 coco mats (substrate), 3 cm thick
• AquaValve
• Copper-coated root control sheet – 115 cm × 51 cm
• 4 mm hose, 1 metre long
• Reducing T-piece – 13 → 4 mm
• T-piece – 4 mm
• Garland plastic tray, resistant to minerals and salts.

Video: https://www.youtube.com/watch?v=_OUN6sXH2wY

T.A CultiMate AERO

If you want to try aeroponics at low cost, this is the system for you. It can be used throughout the entire growth cycle, only for a particular phase, or for mother plants. It is supplied in 2 versions according to the size of the mesh pots: 2" (5 cm) or 3" (7.5 cm).

The set includes:

• HX-8810 submersible water pump — 220 V, 20 W; flow rate 1000 L/h; head 1.95 m — with a 1-year warranty
• Large reservoir, allowing easy stabilisation of the working solution; ample room for roots

The system comes with clear, detailed instructions for assembly and use

Outlet for 13 mm tubing.

16 mm hose for AutoPot

Terra Aquatica’s EBB & GROW system is based on the proven EBB & FLOW design.

A water pump floods the tray holding the pots to deliver the nutrient solution.

This removes stale air from your plants’ roots; as the water drains back into the reservoir, fresh air enters the root zone.

• 95cmx95cm
• Height: 38cm
• Weight: 16.5kg
• Material: 100% recycled polyethylene
• Made in France

• Reservoir: up to 100 litres
• Tray 95x95cm
• Water level indicator
• Water pump SICCE - 600L/H – 6.5W – 240 Volts – 50/60Hz
• Fertilisers - T.A Flora GRO 0.5l; T.A Flora Bloom 0.5l; T.A Flora Micro Soft Water 0.5l; GHE Flora Micro HW 0.5l
• Fittings
• Inlet and outlet filter

This easy, reliable system is suitable for complete beginners as well as experienced growers.

Its compact size allows the system to be placed in any room, while its low height leaves ample space for your plants to develop.

The system is used with a timer, which regulates the irrigation cycle. If the irrigation period is shorter than 15 minutes, use a digital timer.

The system can be used with plastic pots as a lower-cost option, or fabric pots, which cost slightly more but allow even irrigation of the substrate.

You can use all types of substrate, including clay pebbles, coco substrates, soil and rockwool.

Holds up to 32 pots sized 15x15cm or 20 fabric pots of 4 litres each.

The EBB & GROW system is made using rotational-moulding technology, making it exceptionally strong and able to support the weight of pots filled with substrate and crop.

The system requires minimal attention; you can leave it unattended for several days without risking the crop.

The design prevents overflow and makes the system easy to maintain.

T.A. CultiMate® L Solar is one of the most innovative and advanced hydroponic plant-growing systems, offering an exceptionally easy and effective way to grow plants without soil.

• made of super-strong and durable recycled plastic
• protection against UV and light, protecting the roots
• very low power consumption: < 2 W

• Dimensions L/W/H: 46 x 46 x 43 cm
• effective capacity: 45 l

CuttingBoard

27-site cutting (clone) system. An exceptionally good system for developing vigorous, healthy and adaptable plants with a strong root system. CuttingBoard can be used by professionals and beginners alike, as well as by researchers, teachers and botany professors. Suitable for rooting fruit trees, walnut and almond trees, ornamental shrubs, fruit, vegetables and flowers. Each system includes instructions and a free GHE pH Down Dry kit

Dimensions: 66x30x14cm 

Capacity: 13 L 

Number of sites: 27 

WARNING! Do not leave already rooted cuttings in the system for a long time, ---because their roots can become entangled and difficult to remove and separate.

GrowStream 84 B

Aeroponic system with eighty-four growing sites. Known for its high yields, GrowStream is now available on the Bulgarian market. GrowStream aerates the nutrient solution excellently, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resilient and optimises their productivity. Each system includes instructions and a free TA Flora Gro+Bloom+Micro x 1L kit

• Dimensions: 290/195/32 cm (5 m²)
• Effective capacity: 220l (2x110l)

Countless gardeners, scientists and researchers are convinced that no other system delivers such good results. NASA scientists have been using these systems for 15 years to investigate the possibilities of hydroponic methods. GrowStream systems are modular and expandable and adapt easily to various applications: GS14 fits easily on a balcony or even behind a window; GS60, with its large reservoir, is suitable for a greenhouse; GS20 and GS28 are low enough to fit in a tunnel greenhouse or home greenhouse; GS56 B and GS84 B are even lower (32 cm), suitable for more professional requirements. TA also carries out custom projects according to customer needs.

The hydroponic vertical tower with 9 levels is a practical system for growing plants without soil. It enables efficient use of space by providing optimal conditions for the development of various vegetables, herbs and leafy crops. It is suitable for home use, as well as for greenhouses or small urban gardens.

Construction: vertical system with 9 separate levels, allowing multiple plants to be grown in a small area.

Hydroponic principle: plants grow without soil, receiving nutrients through a circulating nutrient solution.

Material: made from durable, lightweight materials (plastic), suitable for long-term use in contact with water and nutrient solutions.

Space saving: the vertical design enables maximum use of limited space, making it suitable for balconies, terraces, greenhouses and indoor spaces.

Suitable crops: ideal for lettuce, herbs, spinach, rocket, strawberries and other compact plants.

Modular design: the levels are arranged to ensure good water circulation and even distribution of the nutrient solution.

The set includes: 1x sponge for germinating your seeds; 1x seed tray; 1x timer; 1x plug adapter with dimmer; 1x water pump matched to the system flow rate; 1x top cap; 1x top part that distributes the water solution; 9x tier sections, with 4 openings for baskets; 1x cover for the body section; 1x container for the water solution; 4x short bolts with nuts; 2x long bolts; 36x hydroponic baskets.

AQUAbox Spyder is designed to supply water and feed plants of all types and sizes that are grown directly in the soil.
AQUAbox Spyder is attached to capillary wicks that distribute water beneath the soil over an area of up to 1.2 square metres.
With an AQUAvalve valve at its base, AQUAbox Spyder draws water from a reservoir only in the amount plants need, ensuring efficient water use. Plant roots instinctively grow towards the water source, attaching themselves to the capillary wicks below soil level.

• 4 mm tubing - 2.15 metres
• Aqua Valve valve
• Water reservoir seal
• 6 mm capillary strip, 6 metres long
• Small spirit level
• 13 mm to 4 mm reducer with filter

Video: https://www.youtube.com/watch?v=3IRMITTlc1k

Atami WILMA XXL20 Tray (AW420TR) is an original replacement bearing and drainage tray for the Wilma XXL 20 hydroponic system. It supports the 20 pots above the nutrient tank and, through its shaped slope, returns the excess nutrient solution by gravity back into the tank. The size is 115 × 115 × 20 cm, corresponding to the square format of the Wilma XXL series. 

tray AW420TR is intended as a direct replacement component for the Atami Wilma XXL 20 system. The pots are placed in it, and the nutrient solution that drains after irrigation is collected and directed back to the tank, which allows it to be reused in the recirculation system. 

The configuration with 20 plant positions is suitable for denser placement of smaller pots on an area of ​​115 x 115 cm. The tray itself is a spare part - reservoir, pots, pump and irrigation system are not included. The official Wilma XXL 20 system uses a tank of 150 L and 20 pots of 6.5 L. 

Technical specifications

• Manufacturer: Atami / Wilma
• Model: Tray for Wilma XXL20
• Product code: AW420TR
• Type: Spare support / drainage tray
• Dimensions: 115 × 115 × 20 cm
• Capacity: 20 positions for flower pots
• Compatible system: Wilma XXL 20 Complete
• Official pot size in the system: 20 × 6.5 L
• Function: Maintaining the pots and draining the excess nutrient solution
• Drain: Gravity to feed tank
• Suitable for: Hydroponic and substrate cultivation with Wilma XXL 20 system.

🔄 How

With the Wilma system, the pots are placed on the tray and the nutrient solution is supplied to each plant by drip irrigation. Excess water and nutrient solution pass through the pots and fall onto the tray, from where they return to the tank. Atami designed the Wilma as an automated drip system suitable for a variety of substrates – including coconut, peat mixes and hydroponic substrates. 

🔗 Compatibility

Tray is designed specifically for:

Atami / Wilma XXL 20 Complete 6.5L

The parts catalog specifically identifies AW420TR as the "Wilma XXL 20 pot tray" for this configuration. 

📦 What does the product

1 × Atami Wilma XXL20 Replacement Tray – AW420TR

⚠️ This is not a Wilma XXL20 kit. Pots, tank, pump, hoses, drippers and other irrigation system components are purchased separately if not already part of the existing system. 

T.A CultiMate Solar

Efficient, reliable, easy to use and economical. T.A CultiMate Solar systems are based on the first “home” hydroponic system, designed in 1975. Plants are rooted in a layer of clay pebbles above a nutrient-solution reservoir; the solution is pumped upward through an “air column” while being aerated. This oxygen-enriched solution constantly bathes the roots, supporting exceptional growth.

The set includes:

ACO-2201 air pump - 220V, 1,8W; pressure >0,012Mpa, 1,3L/min - with a 1-year warranty

Large reservoir for easy stabilization of the working solution; ample room for roots

The system comes with clear, detailed instructions for assembly and use

With minimal maintenance, it delivers fast, stable growth, superior flowering and an excellent harvest

Dimensions: 46x46x43cm

Total volume approx. 45L, effective volume 35L

Made from durable, UV-protected plastic

For 1–6 plants, depending on their type, size and needs

GrowStream 60

Aeroponic system with sixty growing sites. Known for its high yields, GrowStream is now available on the Bulgarian market. GrowStream aerates the nutrient solution exceptionally well, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resilient and optimises their productivity. Each system includes instructions and a free T.A Flora Gro+Bloom+Micro x 1L kit

• Dimensions: 325/100/56 cm (3 m²)
• Effective capacity: 240 l

GrowStream 60

Aeroponic system with sixty growing sites. Known for its high yields, GrowStream is now available on the Bulgarian market. GrowStream aerates the nutrient solution exceptionally well, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resilient and optimises their productivity. Each system includes instructions and a free T.AFlora Gro+Bloom+Micro x 1L kit

• Dimensions: 325/100/56 cm (3 m²)
• Effective capacity: 240 l

Countless gardeners, scientists and researchers are confident that no other system delivers such good results. NASA scientists have used these systems for 15 years to explore the possibilities of hydroponic methods. AeroFlo systems are modular and expandable and readily adapt to different applications: GS14 fits easily on a balcony or even behind a window; GS60, with its large reservoir, is suitable for a greenhouse; GS20 and GS28 are low enough to fit in a polytunnel or home greenhouse; GS56 B and GS84 B are even lower (32 cm), suitable for more professional needs. T.A also delivers custom projects according to customer requirements.

PLANT!T AEROS is an easy-to-use Deep Water Culture (DWC) hydroponic system, also known as a "bubbler". With a minimal amount of substrate and intensive aeration, this pot provides fast plant growth and strength. Key technical features:

• System type: DWC (Deep Water Culture)
• Reservoir capacity: 15L (effective capacity: 12L)
• Dimensions: 303 mm width, 357 mm depth, 353 mm height
• Air and water pump included

Fast growth, healthy roots and easy use with PLANT!T AEROS!

PLANT!T AEROS is an exceptionally popular and easy-to-use hydroponic kit for growing plants with the Deep Water Culture (DWC) method, also known as a "bubbler". The system uses a minimal amount of growing medium (for example, hydroton) while providing more nutrients through aeration of the solution.

How does the system work?

The plant is placed in a hydroponic pot filled with substrate (most commonly expanded clay pebbles - hydroton), and its roots are immersed in nutrient solution. Thanks to the air pump and air stones at the bottom of the reservoir, the solution is constantly aerated. This keeps the plant's roots in constant contact with nutrients and oxygen, which leads to significantly accelerated growth. Aeration also keeps the roots healthy and gives them continuous, gentle movement.

Nutrient-solution control:

For optimal results, we recommend regular monitoring of the solution's pH and EC values. This is easily done by simply removing the lid and testing the solution.

High component quality:

All PLANT!T AEROS components are made of high-quality materials and are fully compatible to provide long-lasting, reliable operation.

The set includes:

• Main reservoir with a transparent section for monitoring water level
• Main reservoir lid
• Inspection opening cap
• Nutrient-solution distribution set
• Two-outlet air pump
• Silicone air hose (1 m)
• Hydroponic net pot
• Water pump and other additional components for maximum convenience

T.A. HydroCloner Spinner 72 is a professional aeroponic system for fast and efficient rooting of cuttings. It provides optimal oxygenation and constant humidity, leading to faster development of healthy roots. Suitable for both beginner gardeners and professional applications.

Capacity: up to 72 cuttings at once — an ideal solution for mass plant propagation.

System type: aeroponic — the roots are sprayed with a fine nutrient mist, accelerating development and improving oxygen uptake.

Reservoir: around 60–70 litres — the large volume helps stabilise the pH and nutrient solution.

Dimensions:  67 × 67 × 31 cm — compact construction relative to its capacity.

Motor: Vortex / Spinner motor (12V) — provides constant movement and oxygenation of the solution.

Technology: micro-misting (mist/spray), which keeps the stems constantly moist and stimulates rapid rooting.

Material: made from durable, UV-resistant recycled plastic — suitable for long-term use.

Design: neoprene collars are included to hold cuttings securely and allow easy cleaning and reuse.

Application: suitable for hydroponics, coco* and soil* cultivation — for preparing seedlings or clones.

Recommendations for use:

Preparation: fill the reservoir with water or nutrient solution and maintain a temperature of around 20–22°C for optimal results.

Placing cuttings: secure the cuttings in the neoprene holders so that the stem is in the spray zone.

Additives: use a root stimulator* for faster, more uniform development.

Maintenance: clean the system regularly and check the spraying mechanism for optimal operation.

Ventilation and hygiene: maintain a clean environment and good air circulation to reduce the risk of disease.

GrowStream 20

Aeroponic system with twenty planting sites. Known for its high yields, Growstream is now available on the Bulgarian market. GrowStream aerates the nutrient solution exceptionally well, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resilient while optimising productivity. Each system includes instructions and a free T.A Flora Gro+Bloom+Micro x 1L kit

• Dimensions: 130/67/44 cm
• Effective capacity: 90 L

GrowStream 20

Aeroponic system with twenty planting sites. Known for its high yields, GrowStream 20 is now available on the Bulgarian market. AeroFlo aerates the nutrient solution exceptionally well, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resilient while optimising productivity. Each system includes instructions and a free GHE Flora Gro+Bloom+Micro x 1L kit

• Dimensions: 130/67/44 cm
• Effective capacity: 90 L

Countless gardeners, scientists and researchers are convinced that no other system delivers such good results. NASA scientists have used these systems for 15 years to explore the potential of hydroponic methods. GrowStream systems are modular and expandable, and easily adapt to different applications: the GS14 fits easily on a balcony or even behind a window; the GS60, with its large reservoir, is suitable for a greenhouse; the GS20 and GS28 are low enough to fit in a tunnel greenhouse or home greenhouse; the GS56 B and GS84 B are even lower (32 cm), suitable for more professional needs. GHE also delivers custom projects according to customer requirements.

T.A. CultiMate® S is one of the most innovative and advanced hydroponic plant-growing systems, offering an exceptionally easy and efficient way to grow plants without soil.

• made from super-strong and durable recycled plastic
• protection against UV and light, protecting the roots
• very low power consumption: < 2 W

• dimensions L/W/H: 30.5 x 30.5 x 37 cm
• effective capacity: 15 L

These tees are ideal for reducing 13 mm tubing to 4 mm tubing when using large systems. They are inserted inline at the point where the AQUAvalve valve or aquaPot is located. They provide a watertight connection, unlike many other types of reducing fittings. They work in exactly the same way as the AutoPot 13-4 mm cross connector, but this fitting has one 4 mm tubing connection, while the cross connector provides two 4 mm tubing connections.

🔹 Terra Aquatica GrowStream10 V2 is a high-performance aeroponic-hydroponic system designed to grow up to 10 plants. With its innovative features and improvements over the previous version, it provides optimal growing conditions while saving water and energy.

Detailed specifications

• Number of plants: 10
• Dimensions (L x W x H): 109 x 49 x 57 cm
• Reservoir capacity: approximately 45 liters
• Channel dimensions: 18 cm (width) x 14.7 cm (height)
• Pot dimensions: 8 cm diameter
• Distance between plants: 18.5 cm (center to center)
• Pump: Syncra 1.0 with a flow rate of 950 L/h, 16 W
• Materials: UV-resistant double-wall channels and lids made from recycled materials
• Distribution system: Flexible T-connectors for adaptable plant placement
• Additional accessories: Drainage kit and cleaning brush

Usage recommendations

• Preparation: Assemble the system according to the provided instructions.
• Filling: Add nutrient solution and washed clay pebbles to the pots.
• Planting: Transfer the plants from a hydroponic nursery, such as the HydroCloner® Spinner 72, into the pots.
• Setup: Connect the pump and set the watering intervals according to the plants' needs.

Benefits

• Optimal aeration: Keeps plant roots in aerobic conditions, stimulating rapid growth.
• Efficient water use: The closed system minimizes water loss.
• Flexibility: Allows the distance between plants to be adjusted according to their needs.

Easy maintenance: Improved design for easy cleaning and component replacement

T.A - GrowStream 40 is the most productive, most efficient and most adaptable hydroponic system on the market!

• for 40 plants
• L/W/H dimensions: 210 x 103 x 59 cm
• reservoir volume: 200 L

Based on the same technology as Aeroflo® and incorporating a series of improvements that make the system more user-friendly without compromising quality. The new system has a removable lid and rounded corners for easy cleaning, double walls on both the channel and the lid for better insulation, while the irrigation line is inside the chamber to prevent any leaks. The size is slightly larger than the Aeroflo® system to create more root space and allow for a higher water capacity, making it suited to large plants. The result is a versatile system in which you can choose to grow small or large plants. It is the only hydroponic system on the market adapted for growing large plants, not just lettuce or herbs!

GrowStream® systems are operated by a standard water pump in the reservoir, which pumps water to the main plant tube, where it flows at precisely set intervals. The nutrient solution then runs down the slope of the tube, perfectly oxygenating the nutrient reservoir: no unnecessary controllers or separate air pumps – GrowStream® is exceptionally easy to assemble and operate, so you can focus on growing plants rather than maintaining the system.

Assembly instructions: here*

13mm Four-Way Connector for irrigation systems