Home page

HydroDrip 120 is an intelligent automatic drip irrigation system with a built-in pump and timer, designed for potted plants, balconies, terraces, offices and greenhouses. The system operates without a connection to the water supply – simply place the suction hose in a container of water. Thanks to programmable watering cycles and the ability to operate for up to 120 minutes, it provides reliable irrigation even when you are away from home.

HydroDrip 120 is a practical solution for automatically watering potted plants without the need for a water supply installation. The built-in electric pump draws water directly from a bucket, barrel or other reservoir and supplies it to the drippers, which deliver the required amount of water directly to the plant roots. This reduces water loss and maintains constant substrate moisture.

The timer allows easy adjustment of both the interval between waterings and the duration of each cycle. You can select a watering frequency from 1 hour to 7 days, and the duration can be set from 1 to 120 minutes, allowing the system to be adapted to different plant types and pot volumes.

The system is powered by 3 AA batteries, allowing fully autonomous operation without mains power. The kit is easy to install and includes all the main components for building an automatic drip system. It is suitable for watering during holidays, business trips or everyday use.

Technical specifications

✔️ Model: HydroDrip 120

✔️ Type: Automatic drip irrigation system

✔️ Power supply: 3 × AA (1.5 V) alkaline or NiMH rechargeable batteries

✔️ Built-in water pump

✔️ Maximum flow rate: 250 ml/min

✔️ Maximum suction height: 5 m

✔️ Maximum delivery height: 2 m

✔️ Operating current: ≤ 500 mA

✔️ Standby consumption: ≤ 100 μA

Watering settings

✔️ Frequency:

• 1 hour
• 3 hours
• 6 hours
• 12 hours
• 24 hours
• 48 hours
• 7 days

✔️ Duration:

• 1 minute
• 3 minutes
• 5 minutes
• 10 minutes
• 15 minutes
• 20 minutes
• 30 minutes
• 60 minutes
• 90 minutes
• 120 minutes

📦 The kit includes

✔️ 1 × Timer with built-in pump

✔️ 1 × Inlet filter

✔️ 10 × Drippers

✔️ 10 × Dripper stakes

✔️ 10 × Tee connectors

✔️ 1 × End cap

✔️ 1 × Pressure regulator

✔️ 10 m hose

✔️ 1 × Metal mounting bracket.

📋 Instructions for use

1. Place the inlet hose in a container of clean water.
2. Connect the drippers to the hose and position them at each plant.
3. Insert 3 AA batteries into the timer.
4. Set the desired watering frequency and duration.
5. Secure the device using the included metal bracket.
6. Check that the system operates correctly before first use.

⚠️ Important: To prevent clogging of the drippers, use clean water and periodically clean the inlet filter. Position the suction hose so that it remains submerged in water throughout the operating period.

💡 Tip from Urban Botaniks: HydroDrip 120 is ideal for people who travel often. Thanks to its ability to water for up to 120 minutes and autonomous battery operation, the system can maintain optimal plant moisture for days or weeks without human intervention.