Products

Automate control of your solution's pH with the Milwaukee MC720 PRO pH Controller and Pump Kit. The kit includes:

• 1x controller with pH probe Milwaukee MC122 PRO pH Controller
• 1x dosing pump Milwaukee MP810 1.5l/h (25ml/min)

EVERYTHING YOU NEED TO VAPORISE CONCENTRATES, WHEREVER YOU ARE!

G-Pen Micro+ Oil Vaporizer Black vaporiser kit. Using a combination of a fully ceramic heater and quartz liner in a dual-channel stainless-steel housing with integrated airflow, the Micro+ tank is designed to provide consistent heat application, optimal flavour profiles at every heat setting and balanced airflow for maximum vapour production. G-Pen Micro comes compactly packed in an elegant premium hemp case with a mesh compartment for storing your concentrates.

• smart-chip technology for controlled heating, ensuring you do not burn your valuable concentrates
• rechargeable 850mAh Li-ion battery
• with haptic feedback*
• silicone mouthpiece

Instructions for use in English: here*

G PEN MICRO+ ADVANCED TECHNOLOGY:

1. SILICONE MOUTHPIECE* (non-toxic and safe for consumption) with ceramic air channels.
2. DUAL-CHANNEL AIRFLOW for maximum insulation and cooling.
3. QUARTZ LINER for optimal flavour.
4. CERAMIC HEATER for consistent heat application.
5. HAPTIC FEEDBACK* vibrates when it reaches temperature.
6. THREE MICRO+ TANK TEMPERATURE SETTINGS: BLUE = LOW, GREEN = MEDIUM, RED = HIGH.
7. POWERFUL, LONG-LASTING BATTERY. Rechargeable Li-ion battery, 850mAh.
8. MANUAL OR SESSION HEATING MODE. Manual activation or 10-second automatic heating.
9. USB / USB-C CHARGING. Charges in 90 minutes + Pass Through charging technology.

What's in the box?

1. vaporiser
2. battery
3. tank
4. silicone mouthpiece
5. keychain loading / cleaning tool
6. USB to USB-C charging cable
7. hemp storage case

EVERYTHING YOU NEED TO VAPORISE CONCENTRATES, WHEREVER YOU ARE!

The portable vaporiser for concentrates and oils G-Pen Micro+ Dr. Greenthumbs Edition was created in collaboration with the iconic rapper from Los Angeles, USA, B-Real. Using a combination of a fully ceramic heater and a quartz liner in a dual-channel stainless-steel housing with integrated airflow, the Micro+ tank is designed to provide consistent heat application, optimal flavour profiles at every heat setting and balanced airflow for maximum vapour production. G-Pen Micro comes compactly packed in an elegant premium hemp case with a mesh compartment for storing your concentrates.

• smart-chip technology for controlled heating, ensuring you do not burn your valuable concentrates
• Rechargeable 850mAh Li-ion battery
• With haptic feedback*
• silicone mouthpiece

Instructions for use in English: here*

G PEN MICRO+ ADVANCED TECHNOLOGY:

1. SILICONE MOUTHPIECE* (non-toxic and safe for consumption) with ceramic air channels.
2. DUAL-CHANNEL AIRFLOW for maximum insulation and cooling.
3. QUARTZ LINER for optimal flavour.
4. CERAMIC HEATER for consistent heat application.
5. HAPTIC FEEDBACK* vibrates when it reaches temperature.
6. THREE MICRO+ TANK TEMPERATURE SETTINGS: BLUE = LOW, GREEN = MEDIUM, RED = HIGH.
7. POWERFUL, LONG-LASTING BATTERY. Rechargeable Li-ion battery, 850mAh.
8. MANUAL OR SESSION HEATING MODE. Manual activation or 10-second automatic heating.
9. USB / USB-C CHARGING. Charges in 90 minutes + Pass Through charging technology.

What's in the box?

1. vaporiser
2. battery
3. tank
4. silicone mouthpiece
5. keychain loading / cleaning tool
6. USB to USB-C charging cable
7. hemp storage case

GrowMax 10" x 2.5" De-Ionization Filter Kit is a kit containing a deionization filter and its components:

• 10" blue housing
• white metal bracket with screws
• 10" deionization cartridge
• 1/4" quick-connect fittings
• 3 m 1/4" white hose
• tightening wrench
• in-line shut-off valve

HydroDrip 120 is an intelligent automatic drip irrigation system with a built-in pump and timer, designed for potted plants, balconies, terraces, offices and greenhouses. The system operates without a connection to the water supply – simply place the suction hose in a container of water. Thanks to programmable watering cycles and the ability to operate for up to 120 minutes, it provides reliable irrigation even when you are away from home.

HydroDrip 120 is a practical solution for automatically watering potted plants without the need for a water supply installation. The built-in electric pump draws water directly from a bucket, barrel or other reservoir and supplies it to the drippers, which deliver the required amount of water directly to the plant roots. This reduces water loss and maintains constant substrate moisture.

The timer allows easy adjustment of both the interval between waterings and the duration of each cycle. You can select a watering frequency from 1 hour to 7 days, and the duration can be set from 1 to 120 minutes, allowing the system to be adapted to different plant types and pot volumes.

The system is powered by 3 AA batteries, allowing fully autonomous operation without mains power. The kit is easy to install and includes all the main components for building an automatic drip system. It is suitable for watering during holidays, business trips or everyday use.

Technical specifications

✔️ Model: HydroDrip 120

✔️ Type: Automatic drip irrigation system

✔️ Power supply: 3 × AA (1.5 V) alkaline or NiMH rechargeable batteries

✔️ Built-in water pump

✔️ Maximum flow rate: 250 ml/min

✔️ Maximum suction height: 5 m

✔️ Maximum delivery height: 2 m

✔️ Operating current: ≤ 500 mA

✔️ Standby consumption: ≤ 100 μA

Watering settings

✔️ Frequency:

• 1 hour
• 3 hours
• 6 hours
• 12 hours
• 24 hours
• 48 hours
• 7 days

✔️ Duration:

• 1 minute
• 3 minutes
• 5 minutes
• 10 minutes
• 15 minutes
• 20 minutes
• 30 minutes
• 60 minutes
• 90 minutes
• 120 minutes

📦 The kit includes

✔️ 1 × Timer with built-in pump

✔️ 1 × Inlet filter

✔️ 10 × Drippers

✔️ 10 × Dripper stakes

✔️ 10 × Tee connectors

✔️ 1 × End cap

✔️ 1 × Pressure regulator

✔️ 10 m hose

✔️ 1 × Metal mounting bracket.

📋 Instructions for use

1. Place the inlet hose in a container of clean water.
2. Connect the drippers to the hose and position them at each plant.
3. Insert 3 AA batteries into the timer.
4. Set the desired watering frequency and duration.
5. Secure the device using the included metal bracket.
6. Check that the system operates correctly before first use.

⚠️ Important: To prevent clogging of the drippers, use clean water and periodically clean the inlet filter. Position the suction hose so that it remains submerged in water throughout the operating period.

💡 Tip from Urban Botaniks: HydroDrip 120 is ideal for people who travel often. Thanks to its ability to water for up to 120 minutes and autonomous battery operation, the system can maintain optimal plant moisture for days or weeks without human intervention.

HydroDrip 15 is an intelligent automatic drip irrigation system designed for up to 15 pots or plants. Thanks to the built-in pump and timer, the system can draw water directly from a container, bucket or reservoir without needing to be connected to a water supply. This makes it an ideal solution for balconies, terraces, greenhouses, offices and rooms without access to running water.

HydroDrip 15 is a compact and fully automatic drip irrigation system that provides plants with the optimal amount of water on a preset schedule. Thanks to the built-in water pump, the device pumps water directly from an external container, allowing it to be used practically anywhere – both indoors and outdoors.

The timer makes it easy to set the watering duration, as well as the watering frequency. Depending on your plants’ needs, you can choose intervals from 1 hour to 7 days, and set the watering duration between 30 seconds and 15 minutes. This ensures that each plant receives the necessary amount of water, without the risk of drying out or overwatering.

The kit runs on an integrated rechargeable lithium-ion battery, which charges via Micro-USB. The IPX5 protection rating allows use both indoors and outdoors; for outdoor installation, the manufacturer recommends placing the device above ground level for better protection.

Technical specifications

✔️ Model: HydroDrip 15

✔️ Type: Automatic drip irrigation system

✔️ Maximum capacity: up to 15 plants (up to 10 recommended for optimal operation)

✔️ Power supply: Built-in Li-Ion battery

✔️ Voltage: 3.7 V / 2000 mAh

✔️ Charging: Micro-USB

✔️ Protection rating: IPX5

✔️ Flow rate: 100 – 250 ml/min

✔️ Maximum suction height: 2 m

✔️ Maximum delivery height: 2 m

Watering settings

✔️ Intervals:

• 1 hour
• 3 hours
• 6 hours
• 12 hours
• 24 hours
• 48 hours
• 3 to 7 days

✔️ Duration:

• 30 seconds
• 1, 3, 5, 6, 7, 8, 10, 12 and 15 minutes.

📦 The kit includes

✔️ 1 × Timer with built-in pump.

✔️ 1 × Filter.

✔️ 10 × Drippers.

✔️ 10 × Dripper stakes.

✔️ 10 × T-connectors.

✔️ 2 × End caps.

✔️ 10 m hose.

✔️ Metal mounting bracket.

✔️ Bottle adapter.

✔️ USB charging cable.

📋 Instructions for use

1. Place the inlet hose in water, a bucket or a reservoir.
2. Connect the drippers to the main hose and place them in each pot.
3. Charge the battery using the included Micro-USB cable.
4. Set the desired watering frequency and duration.
5. Secure the timer to the container or wall using the metal bracket.
6. Check that the system is working before first use.

⚠️ Important: For optimal operation, use clean water and clean the filter regularly. If the system is used outdoors, install the timer above ground level to protect it from direct wetting and the accumulation of dirt.

💡 Tip from Urban Botaniks: HydroDrip 15 is an excellent choice for people who travel often or are away from home. Simply place the inlet hose in a water reservoir, set the watering schedule and the system will automatically care for the plants for days, without needing a water supply connection.

Ensure 100% germination success for seeds and a flying start for your young plants with the ROOT!T Rooting and Seedling Kit (24 cells). The propagator’s deep base with grooved bottom allows tray drainage in case of overwatering, while retaining a small nutrient-solution / water reserve to prevent drying out. The clear lid with a high dome and rotating adjustable ventilation openings regulate humidity and allow you to grow taller plants, which guarantees healthy and strong seedlings. The set contains:

• 1x propagator made of rigid plastic
• 24 ROOTiT rooting and propagation plugs/blocks in a tray
• dimensions L/W/H: 37.5 x 23 x 18 cm

Advantages:

• biodegradable plugs made from natural coconut fibres, peat-free
• for seed germination, rooting cuttings / clones or seedlings
• durable reusable propagator, made from rigid plastic
• the high-dome lid accommodates taller plants
• rotating adjustable ventilation opening
• suitable for long-term use - can be refilled with 24 ROOTiT rooting and propagation plugs/blocks in a tray

Features:

• plug material: coconut fibres
• material of the 24-cell tray: polystyrene
• material of the grooved tray with holes: polypropylene
• lid material: polycarbonate
• plug dimensions: ⌀ 32 mm x 38 mm high
• dimensions of the 24-cell tray: 29.5 x 19 x 4 cm
• propagator dimensions L/W/H: 37.5 x 23 x 18 cm

🔹 Germinador Pro mini is a compact and efficient tool for seed germination, specially designed for small and medium-sized seeds. With its dimensions of 9 x 1.5 cm, it provides optimal germination conditions thanks to the included thermometer and hydrogen peroxide (H₂O₂), which prevents mold growth.

🔹 Detailed specifications:

• Manufacturer: VDL
• Dimensions: 9 x 1.5 cm
• Material: Plastic (PET plate)
• Included components:
  • Contact thermometer
  • 2 cotton pads
  • 6 ml H₂O₂ (hydrogen peroxide)
  • Dark environment box
• Color: Transparent with a white lid
• Origin: Spain

🔹 Recommendations and instructions for use:

1. Open the lid of Germinador Pro mini.
2. Place 15 ml of water in the base of the device.
3. Moisten the cotton pads with water and place them on the water in the base.
4. Place the seeds on the cotton pads.
5. Add 3 drops of H₂O₂ to the seeds.
6. Close the lid and place the device in a dark location at a temperature between 22–24°C.
7. Check the moisture of the cotton pads daily and add water as needed.
8. Once the seeds have germinated, move them to a suitable environment for further growth.

✅ Benefits of use:

• High efficiency: Provides up to a 98.9% seed germination success rate.
• Easy to use: A simple and intuitive germination process, suitable for beginners and experienced gardeners.
• Condition control: Built-in thermometer and included H₂O₂ for optimal germination conditions.
• Mobility: Compact dimensions, suitable for small spaces.

🔹 Germinador Pro mini is a compact and efficient tool for germinating seeds, specially designed for small- and medium-sized seeds. Measuring 5.5 x 1.5 cm, it provides optimal germination conditions thanks to the included thermometer and hydrogen peroxide (H₂O₂), which prevents mold growth.

🔹 Detailed specifications:

• Manufacturer: VDL
• Dimensions: 5.5 x 1.5 cm
• Material: Plastic (PET sheet)
• Included components:
  • Contact thermometer
  • 2 cotton pads
  • 3 ml H₂O₂ (hydrogen peroxide)
  • Dark environment box
• Color: Transparent with a white lid
• Origin: Spain

🔹 Recommendations and instructions for use:

1. Open the lid of the Germinador Pro mini.
2. Place 15 ml of water in the base of the device.
3. Moisten the cotton pads with water and place them on the water in the base.
4. Place the seeds on the cotton pads.
5. Add 3 drops of H₂O₂ to the seeds.
6. Close the lid and place the device in a dark location with a temperature between 22–24°C.
7. Check the moisture of the cotton pads daily and add water if necessary.
8. Once the seeds have germinated, move them to a suitable environment for further growth.

✅ Benefits of use:

• High efficiency: Provides up to a 98.9% success rate for seed germination.
• Easy use: A simple and intuitive germination process, suitable for beginners and experienced gardeners.
• Condition control: Built-in thermometer and included H₂O₂ for optimal germination conditions.
• Mobility: Compact dimensions, suitable for small spaces.

Rain My Farm Balcony is a ready-made kit for automatic drip irrigation of up to 30 pots, including an AMICO+ timer, all necessary tubing, fittings and drippers for quick installation of an irrigation system. It is a practical solution for balconies, terraces, yards, greenhouses and conservatories, providing even, economical watering even when you are away from home.

Drip irrigation is one of the most effective ways to maintain optimum plant moisture while significantly reducing water consumption. The My Farm Balcony kit is designed as a ready-made "Do It Yourself" solution, allowing easy installation of an automatic irrigation system without the need for specialised tools or technical knowledge.

The kit allows irrigation of up to 30 pots through individual drippers that deliver water directly to the root system. In this way, plants receive the required amount of water without losses from evaporation or runoff. This leads to healthier growth, lower risk of overwatering and significantly lower water consumption.

The kit includes an AMICO+ timer, which enables fully automatic watering control. The large LCD display with automatic backlight makes settings easier, and programming takes only a few simple steps—setting the start time, duration and watering frequency. This provides reliable, precise irrigation even during holidays or longer absences.

Technical specifications

✔️ Manufacturer: Rain S.p.A.

✔️ Series: My Farm Balcony

✔️ Type: Automatic drip irrigation kit

✔️ Maximum capacity: up to 30 pots

✔️ Included timer: AMICO+

✔️ Installation: To a standard water tap

✔️ Irrigation type: Drip

✔️ Suitable for outdoor and indoor use

✔️ Easy installation without specialised tools

✔️ Can be expanded with additional Rain components.

📦 The kit includes

✔️ 1 × Timer AMICO+

✔️ Main polyethylene tube

✔️ Capillary hose

✔️ Drippers for up to 30 plants

✔️ Connecting fittings

✔️ End caps

✔️ Fixing clips

✔️ Adapters for connecting to a water source

✔️ Detailed installation instructions.

Benefits

✔️ Automatically waters up to 30 pots

✔️ Significantly reduces water consumption

✔️ Maintains constant substrate moisture

✔️ Protects plants from drying out while you are away

✔️ Easy "Do it yourself"

✔️ Timer with digital display included

✔️ Individual water supply to each plant

✔️ Suitable for balconies, terraces, greenhouses and gardens

✔️ Compatible with Rain components for future expansion.

📋 Instructions for use

1. Connect the AMICO+ timer to the water tap.
2. Lay out the main pipe according to the arrangement of the pots.
3. Connect the capillary tubes and drippers to each pot.
4. Use the timer to set the desired watering time, duration and frequency.
5. Start the system and check that all drippers are working correctly.
6. If necessary, adjust the position of the drippers for optimal watering.

⚠️ Important: Before first use, flush the system with clean water to remove any contamination from the tubing. We recommend using a filter at the water source, especially with harder or contaminated water, to prevent drippers from clogging.

💡 Urban Botaniks tip: If you use pots of different sizes, position the drippers so water reaches as close as possible to the base of each plant. This will provide even moisture to the root system and increase watering efficiency.

AgroDrip 15 is a ready-made drip irrigation kit designed for up to 15 pots or plants. The system delivers water precisely to the root zone, reducing water consumption and making daily plant care easier. The kit is suitable for balconies, terraces, greenhouses and small gardens, and can easily be connected to a water tap.

AgroDrip 15 is a practical solution for building a compact drip system without specialised tools. Thanks to the included microtubes, drippers and fittings, installation is quick and easy, and each plant receives the required amount of water directly in the root zone. This improves plant development and significantly reduces water loss through evaporation.

The kit is suitable for irrigating up to 15 pots and can be easily adapted to the arrangement of the plants. If necessary, the system can be combined with an automatic watering timer, providing fully automated operation and trouble-free irrigation even when you are away.

Using drip irrigation maintains consistent substrate moisture, limits overwatering and creates optimal conditions for growing vegetables, herbs, ornamental plants and flowers outdoors as well as in greenhouses.

Technical specifications

✔️ Manufacturer: Agrodrip 

✔️ Model: Agrodrip 15

✔️ Type: Drip irrigation kit

✔️ Capacity: up to 15 pots or plants

✔️ Installation: To a water tap

✔️ Suitable for outdoor and indoor use

📦 The kit includes:

✔️ Microtube Ø6 mm – 30 m

✔️ Microtube Ø7 mm – 1 m

✔️ 15 pcs. drippers with stake

✔️ 20 pcs. Ø6 mm barbed tees

✔️ 2 pcs. Ø6 mm barbed elbows

✔️ 1 pc. Ø7 × Ø6 mm barbed connector

✔️ 1 pc. male connector 1/2" × Ø7 mm

✔️ 1 pc. reducing coupling 3/4" × 1/2".

Application

Suitable for:

• Potted plants

• Balcony flowers

• Vegetables in pots

• Herbs

• Greenhouses

• Terraces

• Conservatories

• Yards

• Home and professional gardens.

📋 Instructions for use

1. Connect the kit to a water tap using the included adapters.
2. Position the main microtube according to the location of the pots.
3. Install the tees, elbows and drippers at each plant.
4. Check the system for leaks and correct water distribution.
5. If desired, connect the system to an automatic watering timer.
6. Periodically check the drippers and clean them when necessary.

⚠️ Important: For reliable operation and a longer system lifespan, it is recommended to use filtered water or install a filter before the system. This reduces the risk of dripper clogging and ensures even watering.

💡 Urban Botaniks tip: If you want fully automatic irrigation, combine AgroDrip 15 with a watering timer. This way, plants will receive the required amount of water on precisely scheduled days and times, even when you are away from home.

AgroDrip 30 is a ready-made drip irrigation kit designed for up to 30 pots or plants. The system delivers water precisely and directly to the root zone, reducing water use and making daily plant care easier. The kit is suitable for balconies, terraces, greenhouses and small gardens, and can easily be connected to a water tap.

AgroDrip 30 is a practical solution for building a compact drip system without specialised tools. Thanks to the included microtubes, drippers and fittings, installation is quick and easy, while every plant receives the required amount of water directly in the root zone. This improves plant development and considerably reduces water loss through evaporation.

The kit is suitable for irrigating up to 30 pots and allows easy adaptation to the arrangement of your plants. When needed, the system can be combined with an irrigation controller for automatic watering, ensuring fully automated operation and reliable irrigation even when you are away.

Using drip irrigation maintains consistent substrate moisture, limits overwatering and creates optimal conditions for growing vegetables, herbs, ornamental plants and flowers outdoors as well as in greenhouses.

Technical specifications

✔️ Manufacturer: Agrodrip 

✔️ Model: Agrodrip 30

✔️ Type: Drip irrigation kit

✔️ Capacity: up to 30 pots or plants

✔️ Installation: To a water tap

✔️ Suitable for outdoor and indoor use

📦 The kit includes:

✔️ Pipe Ø16 mm – 15 m

✔️ Microtube Ø6 mm – 30 m

✔️ 20 pcs. Quick connector F16 x 3/4"

✔️ 100 pcs. Adjustable stake drippers

✔️ 20 pcs. Stake drippers

✔️ 20 pcs. Barbed tee Ø6 mm

✔️ 2 pcs. Barbed tee Ø16 mm

✔️ 2 pcs. Barbed elbow Ø6 mm

✔️ 2 pcs. Barbed elbow Ø16 mm

✔️ 1 pc. Barbed connector Ø7 mm x Ø6 mm

✔️ 1 pc. Awl Ø7 mm

✔️ 2 pcs. Barbed coupler Ø16 mm

✔️ 10 pcs. Barbed end cap Ø6 mm

✔️ 2 pcs. End clamp Ø16 mm

Application

Suitable for:

• Potted plants

• Balcony flowers

• Vegetables in pots

• Herbs

• Greenhouses

• Terraces

• Conservatories

• Yards

• Home and professional gardens.

📋 Instructions for use

1. Connect the kit to a water tap using the included adapters.
2. Position the main microtube according to the location of the pots.
3. Install the tees, elbows and drippers at each plant.
4. Check the system for leaks and correct water distribution.
5. If desired, connect the system to an automatic watering timer.
6. Periodically check the drippers and clean them when necessary.

⚠️ Important: For reliable operation and a longer system lifespan, it is recommended to use filtered water or install a filter before the system. This reduces the risk of dripper clogging and ensures even watering.

💡 Urban Botaniks tip: If you want fully automatic irrigation, combine AgroDrip 30 with an irrigation controller. This way, your plants will receive the required amount of water on set days and at set times, even when you are away from home.

Kit for germination of seeds and rooting of cuttings with built-in LED lighting. The system provides a suitable environment for the early development of plants, supporting stable germination and a healthy start of seedlings. It is suitable for home cultivation, greenhouses or use in seasons with less natural light.

Capacity: 40 individual nests for seeds or cuttings, allowing simultaneous germination of a large number of plants.

Lighting: equipped with 2 LED strips with cold light, which provide additional light for better development of young plants.

Dimensions: 38 × 24 × 12 cm — compact size, suitable for placing on a table, shelf or work surface.

Construction: includes a tray and seedling compartments that facilitate organized germination and plant maintenance.

Purpose: suitable for germinating vegetables, herbs, flowers and other plants, as well as for rooting cuttings.

Set of carbon filters for the water-cooled air conditioner OptiClimate 3500 PRO 3. The carbon filters remove odours and mould spores from the air. The set contains three filters (a 12-week set). We recommend replacing the filter every 4 weeks.

• 3 pcs. carbon filters for OptiClimate 3500 PRO 3
• dimensions: 48 x 40.5cm

Carbon filter set for water-cooled air conditioner OptiClimate 6000 PRO 3. The carbon filters remove odours and mould spores from the air. The set contains three filters (a 12-week set). We recommend replacing the filter every 4 weeks. 

• 3 pcs carbon filters for OptiClimate 6000 PRO 3
• dimensions: 59.7 x 49cm

GrowMax Float Valve Kit is a set of a valve and fittings. It lets you fill your reservoir and leave it unattended without worry.

• 1/4" hose connector
• 3/8" hose connector
\r\n

Small sprayer with 1 m hose.

Light SET 600W HortiLight is a complete lighting kit for indoor growing. The kit consists of:

• HotiLight 600W magnetic ballast 1 pc.
• dual-spectrum lamp HortiLight SHP 600W dual 1 pc.
• Stucco reflector 1 pc.

LUMii Black 600W Set  is an indoor lighting set that includes:

• bulb / lamp: dual-spectrum LUMii BLACK 600W , 1 pc.
• ballast: digital LUMii BLACK 600W , 1 pc.
• reflector: open Stucco , 1 pc.

Attention: the kit does not include a cable from the ballast to the reflector!

LUMii Black 600W and Maxibright Warpdrive set for indoor growing. The set includes:

• bulb / lamp: dual-spectrum LUMii BLACK 600W 1 pc.
• ballast: electronic Maxibright Warpdrive 1 pc.
• reflector: open LUMii Black 1 pc.

LUMii Black 600W, Hortilight and MAXLIGHT indoor growing kit. The kit includes:

• bulb / lamp: dual-spectrum LUMii BLACK 600W 1 pc.
• ballast: magnetic Hortilight 600W 1 pc.
• reflector: enclosed Garden Highpro MAXLIGHT 1 pc.
  

Attention: the kit does not include cables or a plug!

Economy LUMii Black 600W, Hortilight and Stucco set for indoor growing. The set includes:

• bulb / lamp: dual-spectrum LUMii BLACK 600W 1 pc.
• ballast: magnetic Hortilight 600W 1 pc.
• reflector: open textured Stucco 1 pc.

Warning: the set does not include cables or a plug!

LUMii Black 600W, Maxibright Warpdrive and Azerwing kit for indoor growing. The kit includes:

• lamp / bulb: dual-spectrum LUMii BLACK 600W 1 pc.
• ballast: electronic Maxibright Warpdrive 1 pc.
• reflector: open Azerwing 1 pc.

Attention: the kit does not include a cable from the ballast to the reflector!