Products

Sylvania GroLux SHP-TS 250W is a dual-spectrum sodium / HPS bulb / lamp, suitable for both the growth / vegetative stage and the flowering stage.

• for growth and flowering
• power: 250W
• current: 2.6A
• luminous flux: 34 000 lm, 75 500 Phyto-lm
• efficacy: 136 lm/W
• colour temperature: 2050 K
• lifespan: 26 000 h.
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 40 cm from plant tops!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

Sylvania GroLux SHP-TS 400W is a dual-spectrum sodium / HPS bulb / lamp, suitable for growth / vegetative growth as well as the flowering stage.

• for growth and flowering
• power: 400W
• luminous flux: 58 000 lm, 128 000 Phyto-lm
• efficacy: 145 lm/W
• colour temperature: 2050 K
• lifespan: 26 000 h.
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Place at least 50 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock — disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard — keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns — allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life — indicated by intermittent switching on and off or significant changes in colour or brightness — the lamp must be replaced immediately!

The "Synchro" digital timer is a reliable, convenient device designed for time control in a variety of situations. This compact, easy-to-use timer is ideal for home use, professional applications and many other areas where accuracy and reliability are essential.

Precise and reliable: the "Synchro" digital timer is equipped with a high-quality internal mechanism that ensures accurate timekeeping. You can rely on it for precise, dependable results in any situation. Easy to set: the "Synchro" timer has a clear, intuitive design that makes it exceptionally easy to configure. Compact and durable: this digital timer is made with a robust construction and compact dimensions, making it easy to carry and store. You can use it both at home and professionally. With the "Synchro" digital timer, you can rely on its precision and dependability to organise your time more efficiently and succeed in your tasks.

• The timer can run 8 on/off programs at different times on different days (or groups of days) of the week.
• ON / AUTO / OFF mode selection (always on / programmed / off).
• Selection of 12/24-hour modes.
• daylight saving time function.
• The random function (RAMDOM) allows you to start programs with a random delay of 0-32 minutes.
• 16 programming combinations for individual days or groups of days: 1. Mo (Monday) 2. Tu (Tuesday) 3. We (Wednesday) 4. Th (Thursday), 5. Fr (Friday), 6. Sa (Saturday) 7. Su (Sunday) 8. Mo, Tu, We, Th, Fr, Sa, Su (every day) 9. Mo, Tu, We, Th, Fr (weekdays), 10. Sa, Su (weekend) 11. Mo, Tu, We, Th, Fr, Sa (Mon.-Sat.), 12. Mo, We, Fr (Mon.-Wed.-Fri.), 13. Tu, Th, Sa (Tue.-Thu.-Sat.) 14. Mo, Tu, We (Mon.-Tue.-Wed.), 15. Th, Fr, Sa (Thu.-Fri.-Sat.), 16. Mo, We, Fr, Sa (Mon.-Wed.-Fri.-Sat.).

Commissioning:

• Plug in the timer.
• Leave it connected for about 12 hours to charge the rechargeable battery.
• Reset by pressing MASTER CLEAR with a sharp object (e.g. a pen).
• The timer is ready for use.

Current time settings:

• Hold the CLOCK button while simultaneously pressing WEEK until the desired date is reached. Continue with the hour (HOUR) and minute (MINUTE) buttons until the correct time is displayed. 
• Release both buttons. The date and time are set.
• To make corrections, repeat the previous steps.

Program settings:

• Press TIMER once. You can program the switch-on time (ON) for program 1.
• Press WEEK to select individual days or groups of days. Set the switch-on time with HOUR and MINUTE.
• Press TIMER again to move to the switch-off time setting (OFF). Set the switch-off time with HOUR and MINUTE.
• Press TIMER again to complete the settings for program 1. You can set up to 8 independent programs this way.
• After completing the settings, press CLOCK and the timer will be ready for use.

Example: 
(ON) at 18:45 and switch-off (OFF) at 22:15 every day of the week: 
Press TIMER and the display will show 1 ON. Press WEEK until Mo, Tu, We, Th, Fr, Sa, Su (every day). Set the hour to 18:00. Set the minutes to 18:15. Press TIMER again and 1 OFF will appear. Set it to 22:15. Use RES / RCL to interrupt program settings.

Tip: 

• Make sure that programs do not overlap, especially when using the groups-of-days option.

ON / AUTO / OFF mode

• Press ON / AUTO / OFF to choose between three operating modes – always on / programmed / off.

Random function:

• In automatic mode (AUTO), press RANDOM. RANDOM will appear on the display. Programs will start with a random delay of 0-32 minutes between 18:00 and 6:00. Press RANDOM again to disable this function.

12/24-hour mode:

• Press CLOCK and TIMER simultaneously to switch between 12- and 24-hour display.

Daylight saving time:

• In automatic mode (AUTO), press CLOCK and ON/AUTO/OFF simultaneously. The SUMMER option appears (in summer).
• The clock is adjusted by one hour.
• Press both buttons again to return to winter time.

WARNING!

• Do not connect an appliance to the timer if its load exceeds 16 A!
• Make sure the plug is securely connected!
• Clean it only when unplugged and with a dry cloth! Do not immerse it in water or any other liquid!
• Heaters and similar appliances must not be left unattended while in use! Manufacturers do not recommend connecting these appliances to the timer!

The "Synchro" mechanical timer is a reliable and convenient device designed for time control in a variety of situations. This compact, easy-to-use timer is ideal for home use, professional applications and many other areas where accuracy and reliability are essential.

Accurate and reliable: the "Synchro" mechanical timer is fitted with a high-quality internal mechanism that ensures accurate time measurement. You can rely on it for precise and reliable results in any situation. Easy to set: the "Synchro" timer has a clear and intuitive design that makes it exceptionally easy to set. Simply set the desired time, turn the timer dial and it will start timing. Compact and durable: this mechanical timer is made with a sturdy construction and compact dimensions, making it easy to carry and store. You can use it both at home and professionally. With the "Synchro" mechanical timer, you can rely on its accuracy and reliability to achieve more efficient time management and success in your tasks.
Note: Make sure the timer is firmly inserted into the power outlet!

T.A - GrowStream 40 is the most productive, most efficient and most adaptable hydroponic system on the market!

 

• for 40 plants
• L/W/H dimensions: 210 x 103 x 59 cm
• reservoir volume: 200 L

Based on the same technology as Aeroflo® and incorporating a series of improvements that make the system more user-friendly without compromising quality. The new system has a removable lid and rounded corners for easy cleaning, double walls on both the channel and the lid for better insulation, while the irrigation line is inside the chamber to prevent any leaks. The size is slightly larger than the Aeroflo® system to create more root space and allow for a higher water capacity, making it suited to large plants. The result is a versatile system in which you can choose to grow small or large plants. It is the only hydroponic system on the market adapted for growing large plants, not just lettuce or herbs!

 

GrowStream® systems are operated by a standard water pump in the reservoir, which pumps water to the main plant tube, where it flows at precisely set intervals. The nutrient solution then runs down the slope of the tube, perfectly oxygenating the nutrient reservoir: no unnecessary controllers or separate air pumps – GrowStream® is exceptionally easy to assemble and operate, so you can focus on growing plants rather than maintaining the system.

 

Assembly instructions: here*

T.A BioFiltre / bio-filter for hydroponic systems

An effective solution for a pathogen-free solution. An important tool for successful gardeners, useful in both hydroponics and soil.

BioFiltre brings life to water thanks to T.A SubCulture. In hydroponic systems, and even more so in soil, a symbiosis develops between plants and microorganisms, supporting conversion of organic matter into an available food source.

Mechanical effect:

The biofilter purifies, detoxifies and aerates the water or working solution;

The internal sponge retains all floating debris;

The zig-zag cascade oxygenates and detoxifies the solution by eliminating harmful volatile compounds released by roots;

Biological effect:

SubCulture colonises roots and creates a protective barrier that suppresses the emergence and development of pathogenic microorganisms;
Helps convert organic matter into a plant-available form, increasing nutrient salts;
Facilitates mineral salt uptake;

Use the filter to bring life to the solution and avoid harmful plant stress effects: for example, when temperatures are high, the substrate is poorly aerated or ventilation is ineffective, plants suffer oxygen deficiency in the root zone and become susceptible to infections.

Easy to use, assemble and maintain, BioFiltre is a solution to all root problems.

T.A CultiMate Aero is an innovative and highly efficient hydroponic system for growing plants. This compact and convenient system allows you to grow plants without soil, using water and nutrient solutions. T.A CultiMate Aero is designed with high-quality materials and precise technology that provide optimal conditions for plant growth and development. The system offers aeroponic hydroponic cultivation, with plant roots placed in an air environment and nourished by spraying nutrient solutions. This provides plants with constant access to oxygen and nutrients, resulting in healthy, rapid growth. T.A CultiMate Aero is ideal for growing various types of plants, including vegetables, herbs and spices. With its compact and intelligent design, T.A CultiMate Aero is easy to install and use. Add T.A CultiMate Aero to your gardening repertoire and enjoy high-quality, productive hydroponic plant cultivation.

T.A CultiMate AERO

 

If you want to try aeroponics at low cost, this is the system for you. It can be used throughout the entire growth cycle, only for a particular phase, or for mother plants. It is supplied in 2 versions according to the size of the mesh pots: 2" (5 cm) or 3" (7.5 cm).

The set includes:

• HX-8810 submersible water pump — 220 V, 20 W; flow rate 1000 L/h; head 1.95 m — with a 1-year warranty
• Large reservoir, allowing easy stabilisation of the working solution; ample room for roots

The system comes with clear, detailed instructions for assembly and use

T.A CultiMate Solar

 

Efficient, reliable, easy to use and economical. T.A CultiMate Solar systems are based on the first “home” hydroponic system, designed in 1975. Plants are rooted in a layer of clay pebbles above a nutrient-solution reservoir; the solution is pumped upward through an “air column” while being aerated. This oxygen-enriched solution constantly bathes the roots, supporting exceptional growth.

The set includes:

ACO-2201 air pump - 220V, 1,8W; pressure >0,012Mpa, 1,3L/min - with a 1-year warranty

Large reservoir for easy stabilization of the working solution; ample room for roots

The system comes with clear, detailed instructions for assembly and use

With minimal maintenance, it delivers fast, stable growth, superior flowering and an excellent harvest

Dimensions: 31x31x37cm

Total volume approximately 15L, effective volume 12L

Made from durable, UV-protected plastic

T.A CultiMate Solar

 

Efficient, reliable, easy to use and economical. T.A CultiMate Solar systems are based on the first “home” hydroponic system, designed in 1975. Plants are rooted in a layer of clay pebbles above a nutrient-solution reservoir; the solution is pumped upward through an “air column” while being aerated. This oxygen-enriched solution constantly bathes the roots, supporting exceptional growth.

The set includes:

ACO-2201 air pump - 220V, 1,8W; pressure >0,012Mpa, 1,3L/min - with a 1-year warranty

Large reservoir for easy stabilization of the working solution; ample room for roots

The system comes with clear, detailed instructions for assembly and use

With minimal maintenance, it delivers fast, stable growth, superior flowering and an excellent harvest

Dimensions: 46x46x43cm

Total volume approx. 45L, effective volume 35L

Made from durable, UV-protected plastic

For 1–6 plants, depending on their type, size and needs

Terra Aquatica’s EBB & GROW system is based on the proven EBB & FLOW design.

 

A water pump floods the tray holding the pots to deliver the nutrient solution.

 

This removes stale air from your plants’ roots; as the water drains back into the reservoir, fresh air enters the root zone.

 

• 95cmx95cm
• Height: 38cm
• Weight: 16.5kg
• Material: 100% recycled polyethylene
• Made in France

 

 

• Reservoir: up to 100 litres
• Tray 95x95cm
• Water level indicator
• Water pump SICCE - 600L/H – 6.5W – 240 Volts – 50/60Hz
• Fertilisers - T.A Flora GRO 0.5l; T.A Flora Bloom 0.5l; T.A Flora Micro Soft Water 0.5l; GHE Flora Micro HW 0.5l
• Fittings
• Inlet and outlet filter

This easy, reliable system is suitable for complete beginners as well as experienced growers.

 

Its compact size allows the system to be placed in any room, while its low height leaves ample space for your plants to develop.

 

The system is used with a timer, which regulates the irrigation cycle. If the irrigation period is shorter than 15 minutes, use a digital timer.

 

The system can be used with plastic pots as a lower-cost option, or fabric pots, which cost slightly more but allow even irrigation of the substrate.

 

You can use all types of substrate, including clay pebbles, coco substrates, soil and rockwool.

 

Holds up to 32 pots sized 15x15cm or 20 fabric pots of 4 litres each.

 

The EBB & GROW system is made using rotational-moulding technology, making it exceptionally strong and able to support the weight of pots filled with substrate and crop.

 

The system requires minimal attention; you can leave it unattended for several days without risking the crop.

 

The design prevents overflow and makes the system easy to maintain.

GrowStream 20

 

Aeroponic system with twenty planting sites. Known for its high yields, Growstream is now available on the Bulgarian market. GrowStream aerates the nutrient solution exceptionally well, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resilient while optimising productivity. Each system includes instructions and a free T.A Flora Gro+Bloom+Micro x 1L kit

• Dimensions: 130/67/44 cm
• Effective capacity: 90 L

GrowStream 20

 

Aeroponic system with twenty planting sites. Known for its high yields, GrowStream 20 is now available on the Bulgarian market. AeroFlo aerates the nutrient solution exceptionally well, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resilient while optimising productivity. Each system includes instructions and a free GHE Flora Gro+Bloom+Micro x 1L kit

• Dimensions: 130/67/44 cm
• Effective capacity: 90 L

Countless gardeners, scientists and researchers are convinced that no other system delivers such good results. NASA scientists have used these systems for 15 years to explore the potential of hydroponic methods. GrowStream systems are modular and expandable, and easily adapt to different applications: the GS14 fits easily on a balcony or even behind a window; the GS60, with its large reservoir, is suitable for a greenhouse; the GS20 and GS28 are low enough to fit in a tunnel greenhouse or home greenhouse; the GS56 B and GS84 B are even lower (32 cm), suitable for more professional needs. GHE also delivers custom projects according to customer requirements.

T.A RAINFOREST 6 INSERT 3INCH POT is an innovative hydroponic plant-growing system that allows you to create an ideal environment for the healthy, rapid growth of your plants. This high-quality product from T.A is designed to make the process of soilless plant growing easier and to ensure optimum delivery of nutrients and oxygen to the root system.

T.A RAINFOREST 6 INSERT 3INCH POT includes 6 individual containers with 3-inch plant-opening sizes. This provides sufficient space and support for plant growth while keeping them stable and secure. The system enables efficient use of water and nutrient solutions, ensuring continuous circulation and oxygen access for the roots. T.A RAINFOREST 6 INSERT 3INCH POT is easy to assemble and use, allowing you to control nutrient-solution levels and monitor the growth of your plants. This system is suitable for professional gardeners and hobbyists looking for an efficient way to grow plants without soil. Add T.A RAINFOREST 6 INSERT 3INCH POT to your hydroponic system and enjoy healthy, fast-growing plants with optimum growth and productivity.

GHE 3-pack Pro Organic Starter Kit is a starter set of organic fertilisers for growth and flowering, as well as an organic bloom booster. The kit contains:

 

• 1 x 0.5L Pro Organic Grow - for healthy vegetative growth
• 1 x 0.5L Pro Organic Bloom - for abundant flowering
• 1 x 0.5L Pro Bloom Booster - for large and firm flowers / fruits

T.A. CultiMate® L Solar is one of the most innovative and advanced hydroponic plant-growing systems, offering an exceptionally easy and effective way to grow plants without soil.

 

• made of super-strong and durable recycled plastic
• protection against UV and light, protecting the roots
• very low power consumption: < 2 W

 

• Dimensions L/W/H: 46 x 46 x 43 cm
• effective capacity: 45 l

This system provides plants with continuous access to water and nutrients while protecting them from excess moisture build-up and root suffocation. Add T.A CultiMate Solar to your hydroponic system and enjoy the convenience and efficiency of growing plants without soil. With this system, you will achieve healthy, fast-growing plants with optimal growth and productivity.

T.A. CultiMate® S is one of the most innovative and advanced hydroponic plant-growing systems, offering an exceptionally easy and efficient way to grow plants without soil.

 

• made from super-strong and durable recycled plastic
• protection against UV and light, protecting the roots
• very low power consumption: < 2 W

 

• dimensions L/W/H: 30.5 x 30.5 x 37 cm
• effective capacity: 15 L

T.A CultiMate Solar features a modern, compact design that includes a nutrient-solution reservoir and a water-circulation system. This system gives plants continuous access to water and nutrients while protecting them from excessive moisture build-up and root suffocation. Add T.A CultiMate Solar to your hydroponic setup and enjoy the convenience and efficiency of soil-free growing. With this system, you will achieve healthy, fast-developing plants with optimal growth and productivity.

T.A. HyperBloom - Powder fertiliser for the flowering stage HyperBloom® is a fertiliser enriched with phosphorus, potassium and sulphur that accelerates the plant ripening process and supports flowering and fruiting. T.A. HyperBloom - Powder fertiliser for the flowering stage Now available on the European market: HyperBloom®, a fertiliser for the final flowering stage that has proven itself in practice for years. HyperBloom® is a fertiliser enriched with phosphorus, potassium and sulphur that accelerates the plant ripening process and supports flowering and fruiting. Whether in hydroponics or soil growing, its range of active ingredients makes it easier to use and adaptable to a wide range of species and growing conditions. Even more concentrated and therefore even more economical! How it works: HyperBloom® signals to the plant that its life cycle is nearing its end and accelerates the ripening process. It supplies the plant with the necessary minerals. HyperBloom® optimises yields and improves the crop's flavour characteristics. It increases the synthesis of essential oils and active ingredients in the final flowering and fruiting stage. Indoors, the end of the growth phase of slow-growing plants or late-ripening varieties can be synchronised through faster ripening. Application: Dissolve completely in water before use. HyperBloom is a highly concentrated fertiliser: follow the dosing instructions. Hydroponics and coconut fibre: 2 g per 1 l of water for an EC value of 2 to 2.4 mS. Soil: 1.5 g per 1 l of water for an EC value of 1.5 to 2 mS Application time: 10 days Carefully close the bag after each application and store it in a cool (< 30°) and dry place. Suitable for: Always use HyperBloom® on its own after any other Terra Aquatica or other fertiliser! FlashClean® helps HyperBloom® develop its full effect. When used before HyperBloom®, FlashClean® removes deposits of nitrogen and other minerals from the substrate, allowing HyperBloom® to then form again and make nitrogen available (active nitrogen deficiency), thereby improving flavour.

GHE MaxiBloom 1kg. is the most concentrated 1-component powdered flowering fertiliser on the market. It can be used for growing in hydroponics, coco or soil. MaxiGro has an independent, water-soluble formula made with high-quality primary, secondary and micronutrients in the right concentrations to deliver maximum aroma and yield, even in the softest water.

 

• the most concentrated 1-component powdered flowering fertiliser on the market
• pH-buffered (once the pH value of the nutrient solution is reached, it does not change)
• easy to store and convenient to carry if you grow outdoors

How to use MaxiBloom:

 

• Once added to water, mix thoroughly!
• Store in a dry, tightly sealed container that keeps air out!

 

For growing in soil:

 

• during the pre-flowering stage: 6g per 10L of water
• during the flowering period: 13g. per 10l. water

 

For growing in hydroponics and coco:

 

• during the pre-flowering stage: 8g per 10L of water
• during the flowering period: 18g. per 10l. water

 

You can use MaxiBloom with:

 

• Works for growing all plants and substrates – soil, hydroponics, coco, both indoors and outdoors.
• General Organics additives: The General Organics range includes high-quality organic additives for fine-tuning and improving your harvest.
• FlashClean optimises the health/condition of the substrate and mineral availability, even with an already good harvest.
• Ripen use on its own during the final 10 days to increase flowers.

GHE MaxiGro 1kg is the most concentrated 1-component powdered grow fertilizer on the market. It can be used for growing in hydroponics, coco or soil. MaxiGro has a standalone, water-soluble formula made with high-quality primary, secondary and micronutrients in the right concentrations to deliver maximum flavour and yields, even in the softest water.

 

• the most concentrated 1-component powdered grow fertilizer on the market
• pH-buffered (once the pH value of the nutrient solution is reached, it does not change)
• easy to store and convenient to carry if you grow outdoors

How to use MaxiGro:

 

• Once added to water, mix thoroughly!
• Store in a dry, tightly sealed container that keeps air out!

 

For growing in soil:

 

• when the first roots develop: 2g per 10L of water
• when the first leaves appear: 7g per 10L of water
• during the vegetative stage: 9g per 10L of water
• during the pre-flowering stage: 6g per 10L of water

 

For growing in hydroponics and coco:

 

• when the first roots develop: 3g per 10L of water
• when the first leaves appear: 7g per 10L of water
• during the vegetative stage: 12g per 10L of water
• during the pre-flowering stage: 8g per 10L of water

 

You can use MaxiGro with:

 

• Works for growing all plants and substrates – soil, hydroponics, coco, both indoors and outdoors.
• Fulvic is the best and highest-quality fulvic acid on the market, which we recommend for further increasing and improving the harvest, in addition to the main nutrient fertilisers.
• TrikoLogic provides beneficial micro-organisms in the root zone, TrikoLogic S adds increased protection and additional performance, especially at high temperatures.
• General Organics additives: The General Organics range includes high-quality organic additives for fine-tuning and improving your harvest.

GHE DualPart Coco Bloom 10 L (FloraCoco in the past) is part of the highly concentrated two-part GHE DualPart Coco fertiliser for growing in coconut substrate. Just two bottles - Grow and Bloom are all your plants need from the beginning to the end of the harvest; you only change the ratio between the two in the different phases! Say goodbye to Cal/Mag and P/K boosters!

 

• extremely rich in calcium and magnesium
• a full range of elements for healthy, vigorous growth, abundant flowering and fruiting
• trace elements that develop the full potential of the product's aroma and flavour qualities

How to use GHE DualPart Coco:

 

• Shake the bottles well before each use!
• Add each part separately, always stirring well afterwards!
• If using one measuring cup/jug, rinse it well before adding the next part and after use!
• For precise dosing of the two-part fertiliser, you can see here!

 

Use GHE DualPart Coco with:

 

• Works well with all plants that can be grown in coconut substrate.
• Fulvic is the best and highest-quality fulvic acid on the market, which we recommend for further increasing and improving the harvest, in addition to the main nutrient fertilisers.
• TrikoLogic provides beneficial micro-organisms in the root zone, TrikoLogic S adds increased protection and additional performance, especially at high temperatures.
• FlashClean optimises the health/condition of the substrate and mineral availability, even with an already good harvest.
• FinalPart use on its own during the final 10 days to increase flowers.

GHE DualPart Coco Grow 10 L (formerly FloraCoco) is part of the highly concentrated two-part GHE DualPart Coco fertiliser for growing in coconut substrate. Only two bottles – Grow and Bloom – are all your plants need from the beginning to the end of the harvest; simply change the ratio between them at different stages! Say goodbye to Cal/Mag and P/K boosters!

 

• extremely rich in calcium and magnesium
• a full range of elements for healthy, vigorous growth, abundant flowering and fruiting
• trace elements that develop the full potential of the product's aroma and flavour qualities

How to use GHE DualPart Coco:

 

• Shake the bottles well before each use!
• Add each part separately, always stirring well afterwards!
• If using one measuring cup/jug, rinse it well before adding the next part and after use!
• For precise dosing of the two-part fertiliser, you can see here!

 

Use GHE DualPart Coco with:

 

• Works well with all plants that can be grown in coconut substrate.
• Fulvic is the best and highest-quality fulvic acid on the market, which we recommend for further increasing and improving the harvest, in addition to the main nutrient fertilisers.
• TrikoLogic provides beneficial micro-organisms in the root zone, TrikoLogic S adds increased protection and additional performance, especially at high temperatures.
• FlashClean optimises the health/condition of the substrate and mineral availability, even with an already good harvest.
• FinalPart use on its own during the final 10 days to increase flowers.

GHE - T.A. - Humic 5L (formerly Diamond Black) is a nutrient supplement containing entirely organic, broad-spectrum ligno-humates from recycled wood.

 

• high-quality plant-based humates
• improves uptake of nutrients
• stimulates the activity of microbes
• increases retention of nutrients and reduces water use
• can be used as a powerful compost-making additive

How to use:

 

• Dissolve to make a foliar spray or use as an addition to the main nutrient solution with every watering.

 

Application:

 

• From the earliest stage, when roots begin to develop, until one week into the pre-flowering stage.

 

Dosage:

 

• at root emergence: 3ml in 1L of water
• vegetative phase through pre-flowering: 4ml in 1L of water

 

Use with:

 

• all nutrients—mineral or organic, from GHE or other brands
• in any substrate, hydroponics or outdoor cultivation

GHE pH Test Kit 60ml is a liquid pH tester, ideal both for easy testing and for backup or supplementary measurement after using a digital pH meter.

 

• Quick, reliable, accurate pH testing without batteries
• testing range: from 4.0 to 8.5
• capacity for up to 1000 tests

How to use:

 

1. simply fill the supplied test tube halfway with the prepared nutrient solution
2. add two drops of the liquid pH tester
3. shake and compare the resulting colour with the chart to read the pH level.