Products

Adjustable, quiet air pump Hailea ACO-9630 with a flow rate of up to 16 L/min (960 L/h) and 8 outlets — ideal for aerating tanks, hydroponic systems and aquariums.

Detailed features

• Model: ACO-9630 (ACO series)
• Maximum flow rate: 16 L/min (960 L/h)
• Power consumption: 15 W
• Noise level: < 45 dB
• Head / maximum pressure: ~ 1,5 m (~0.015 MPa)
• Voltage range: 110-120 V / 220-240 V, 50/60 Hz (universal power supply)
• Weight: ~ 2,7 kg
• Dimensions (length × width × height): 248 × 176 × 137 mm
• Design features:
    • 8 outlets with metal fittings
    • Adjustable flow — allows smooth adjustment of the air volume flow
    • Oil-free device — clean air without contamination
    • Multi-layer sound insulation and shock-absorbing feet for minimal vibration and noise

Recommendations for use

• Place the pump on a stable, level surface with vibration-absorbing pads (rubber feet) to minimise noise.
• Connect each of the 8 outlets using flexible tubing (usually Ø 4 mm) — use all of them or only the required number, depending on your needs.
• Adjust the flow to the volume of the system or tank — for smaller tanks, you can reduce it to a low flow rate.
• Keep the inlet filters clean and dust-free to avoid a drop in output.
• Make sure the pump is positioned above the water level or protected by a backflow safety measure so that it does not draw water back in during an interruption.

Benefits

The Hailea ACO-9630 air pump combines power and flexibility: with a flow rate of up to 16 L/min and 8 independent outlets, it is suitable for large, multi-point systems. Its low power consumption (15 W), adjustability and quiet operation make it an excellent choice for aerating tanks, hydroponic systems, aquariums and other installations requiring a reliable oxygen flow.

Quiet and powerful Hailea ACO-9820 air pump, delivering up to 60 L/min (3 600 L/h) through 10 outlets, with a sound-insulated design and waterproof housing.

Detailed features

• Maximum flow rate: 60 L/min (3 600 L/h)
• Power consumption: 35 W
• Noise level: < 40 dB
• Max. pressure: > 0,03 MPa
• Outlets: 10 ports, via a plastic manifold
• Dimensions (L × W × H): 243 × 186 × 201 mm
• Weight: 5,60 kg
• Voltage / power supply: 220-240 V (e.g. European version

Special design features:

  • Dual vibration absorption and sound insulation system for quiet operation.
  • Fully waterproof construction — no additional measures are needed.
  • The included manifold provides multi-channel distribution.

Benefits

Hailea ACO-9820 combines high flow, quiet operation and versatility — with 10 outlets, a sound-insulated design and waterproof housing. It is suitable for systems with a high aeration demand, such as reservoirs, ponds or hydroponic installations.

Maintaining a constant nutrient-solution temperature in hydroponic systems (NFT and DWC) within optimum limits is extremely important for preserving oxygen levels and protecting roots from Pythium* and other diseases.

With the Hailea HC-100A Chiller 1500 - 4000L/h, controlling water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• environmentally friendly refrigerant R134a
• low noise levels
• easy-to-use digital controller
• function for automatic shutdown against overheating
• for a reservoir / aquarium with a volume of: 1000 L

The chiller is designed to operate with a water pump with a flow rate of up to 4000L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-1000A
• recommended flow rate: 1500 - 4000 L/h
• for a reservoir / aquarium with a volume of: 1000 L
• fittings: included
• power: 1 HP
• power consumption: 780 W
• voltage: 220-240V, 50Hz
• current: 3.2 A
• dimensions: 520 x 400 x 480 mm
• weight: 31.3 kg
• warranty: 1 year

Recommendations: The chiller should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Simply fill the chiller with clear vinegar, leave it for 24 hours and then rinse with water. Make sure you also place an air-circulation fan near the chiller to avoid heat build-up.

Please note:

1. The flow rate is determined according to the pump's maximum flow (submersible pump or another external power filter) and the circulation equipment.
2. Cooling performance is shown when the ambient temperature is 30°C, the water temperature before cooling is 28°C, the set temperature is 16°C and the chilled water volume is no more than 1000 litres. As the amount of water being cooled is reduced, the water temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use alternatives to avoid affecting appliance performance.
4. When there is insufficient air exchange in a room, cooling efficiency is reduced if the ambient temperature rises due to heat from the unit.

Maintaining a constant nutrient-solution temperature in hydroponic systems (NFT and DWC) within optimum limits is extremely important for preserving oxygen levels and protecting roots from Pythium* and other diseases.

With the Hailea HC-100A Chiller 200 - 1000 L/h, controlling the water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• environmentally friendly refrigerant R134a
• low noise levels
• easy-to-use digital controller
• function for automatic shutdown against overheating
• for a reservoir / aquarium with a capacity of: 100 L

The chiller is designed to operate with a water pump with a flow rate of 1000 L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-100A
• recommended flow rate: 200 - 1000 L/h
• for a tank / aquarium with a capacity of: 100 l
• fittings: ⌀ 13 mm (included)
• power: 1/20 HP 
• power consumption: 130 W
• voltage: 220-240V, 50Hz
• amperage: 0.6A
• dimensions: 338 x 218 x 325 mm
• weight: 9.2 kg
• warranty: 1 year

Recommendations: The chiller should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Simply fill the chiller with clear vinegar, leave it for 24 hours and then rinse with water. Make sure you also place an air-circulation fan near the chiller to avoid heat build-up.

Please note:

1. The flow rate is determined according to the pump's maximum flow (submersible pump or another external power filter) and the circulation equipment.
2. Cooling performance is tested at an ambient temperature of 30°C, a pre-cooling water temperature of 28°C, a set temperature of 16°C and a chilled-water volume of no more than 100 litres. When the amount of water being cooled is reduced, the water temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use alternatives to avoid affecting appliance performance.
4. When there is insufficient air exchange in a room, cooling efficiency is reduced if the ambient temperature rises due to heat from the unit.

Maintaining a constant nutrient-solution temperature in hydroponic systems (NFT and DWC) within optimum limits is extremely important for preserving oxygen levels and protecting roots from Pythium* and other diseases.

With the Hailea HC-130A 200 - 1000 L/h chiller, controlling the water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• environmentally friendly refrigerant R134a
• low noise levels
• easy-to-use digital controller
• function for automatic shutdown against overheating
• for tank / aquarium volume: 130 L

The chiller is designed to operate with a water pump with a flow rate of 1000L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-130A
• recommended flow rate: 200 - 1000 L/h
• for tank / aquarium volume: 130 L
• fittings: ⌀ 12 or ⌀ 17 mm (included)
• power: 1/15 HP 
• power consumption: 130 W
• voltage: 220-240V, 50Hz
• amperage: 0.8A
• dimensions: 338 x 218 x 325 mm
• weight: 9.5 kg
• warranty: 1 year

Recommendations: The chiller should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Simply fill the chiller with clear vinegar, leave it for 24 hours and then rinse with water. Make sure you also place an air-circulation fan near the chiller to avoid heat build-up.

Please note:

1. The flow rate is determined according to the pump's maximum flow (submersible pump or another external power filter) and the circulation equipment.
2. Cooling performance is shown when the ambient temperature is 30°C, the water temperature before cooling is 28°C, the set temperature is 16°C and the chilled water is no more than 130 litres. As the water cooling decreases, the water temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use alternatives to avoid affecting appliance performance.
4. When there is insufficient air exchange in a room, cooling efficiency is reduced if the ambient temperature rises due to heat from the unit.

Maintaining a constant nutrient-solution temperature in hydroponic systems (NFT and DWC) within optimal limits is essential for preserving oxygen levels and protecting roots from pythium* and other diseases.

With the Hailea HC-150A 250–1200 l/h chiller, controlling water temperature in your hydroponic system or aquarium is easier than ever!

• Compatible with fresh and salt water
• environmentally friendly refrigerant R134a
• low noise levels
• easy-to-use digital controller
• Automatic overheating shut-off
• For reservoir/aquarium volume: 150 l

The chiller is designed to operate with a water pump with a flow rate of 1000L/h (sold separately).

Instructional video: here.*

Features:

• Model: HC-150A
• Recommended flow rate: 250–1200 l/h
• For reservoir/aquarium volume: 150 l
• fittings: ⌀ 12 or ⌀ 17 mm (included)
• Power: 1/10 HP
• Power consumption: 170 W
• voltage: 220-240V, 50Hz
• Current: 1.1 A
• Dimensions: 420 x 248 x 365 mm
• Weight: 15.0 kg
• warranty: 1 year

Recommendations: Clean the chiller every 3–4 months to remove mineral deposits and limescale. Simply fill the chiller with clear vinegar, leave it for 24 hours, then rinse with water. Also ensure you place an air-circulation fan near the chiller to avoid heat buildup.

Please note:

1. The flow rate is determined according to the pump's maximum flow (submersible pump or another external power filter) and the circulation equipment.
2. Cooling-performance testing is shown at an ambient temperature of 30°C, water temperature before cooling of 28°C, set temperature of 16°C and no more than 150 litres of chilled water. As water cooling is reduced, the water temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use alternatives to avoid affecting appliance performance.
4. When there is insufficient air exchange in a room, cooling efficiency is reduced if the ambient temperature rises due to heat from the unit.

Maintaining a constant nutrient-solution temperature in hydroponic systems (NFT and DWC) within optimum limits is extremely important for preserving oxygen levels and protecting roots from Pythium* and other diseases.

With the Hailea HC-2200BH Chiller 1500 - 4000L/h, controlling the water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• environmentally friendly refrigerant R134a
• low noise levels
• easy-to-use digital controller
• function for automatic shutdown against overheating
• for a reservoir / aquarium with a volume of: 2000 L 
• The chiller is designed to operate with a water pump with a flow rate of 1500 to 4000L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-2200BH
• recommended flow rate: 1500 - 4000 L/h
• for a reservoir / aquarium with a volume of: 2000 L
• fittings: 4x ⌀ 25 mm (included)
• power: 2 HP
• power consumption: 1610 W
• voltage: 220-240V, 50Hz
• amperage: 7A
• dimensions: 634 x 468 x 590 mm
• weight: 47 kg
• warranty: 1 year

Recommendations: The chiller should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Simply fill the chiller with clear vinegar, leave it for 24 hours and then rinse with water. Make sure you also place an air-circulation fan near the chiller to avoid heat build-up.

Please note:

1. The flow rate is determined according to the pump's maximum flow (submersible pump or another external power filter) and the circulation equipment.
2. The cooling-performance test is shown when the ambient temperature is 30°C, the water temperature before cooling is 28°C, the set temperature is 16°C and the cooled water volume is no more than 2000 litres. When water cooling is reduced, the water temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use alternatives to avoid affecting appliance performance.
4. When there is insufficient air exchange in a room, cooling efficiency is reduced if the ambient temperature rises due to heat from the unit.

Maintaining a constant nutrient-solution temperature in hydroponic systems (NFT and DWC) within optimum limits is extremely important for preserving oxygen levels and protecting roots from Pythium* and other diseases.

With the Hailea HC-250A Chiller 600 - 2200 l/h, controlling water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• environmentally friendly refrigerant R134a
• low noise levels
• easy-to-use digital controller
• function for automatic shutdown against overheating
• for a tank / aquarium volume of: 250 l

The chiller is designed to operate with a water pump delivering 600 to 2200l/h (sold separately).

Instructional video: here.*

Features:

• model: HC-250A
• recommended flow rate: 600 - 2200 l/h
• for a tank / aquarium volume of: 250 l
• fittings: 2x ⌀ 25 mm (included)
• power: 1/6 HP
• power consumption: 300 W
• voltage: 220-240V, 50Hz
• current: 1.3A
• dimensions: 448 x 330 x 440 mm
• weight: 18 kg
• warranty: 1 year

Recommendations: The chiller should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Simply fill the chiller with clear vinegar, leave it for 24 hours and then rinse with water. Make sure you also place an air-circulation fan near the chiller to avoid heat build-up.

Please note:

1. The flow rate is determined according to the pump's maximum flow (submersible pump or another external power filter) and the circulation equipment.
2. The cooling-performance test is shown when the ambient temperature is 30°C, the water temperature before cooling is 28°C, the set temperature is 16°C and the cooled water is no more than 250 litres. As the water is cooled, its temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use alternatives to avoid affecting appliance performance.
4. When there is insufficient air exchange in a room, cooling efficiency is reduced if the ambient temperature rises due to heat from the unit.

Handy Vapers Leonardo is a stylish, discreet portable vaporiser designed for dry herbs. Thanks to its zirconium cap and ceramic chamber, it provides even heating for rich, clean vapour. Its heat-up time is under 30 seconds, allowing you to start using it quickly. 

Instructions here

Detailed features

• Dimensions (compact): 110 × 40 × 23 mm
• OLED display: 0.49‑inch for easy control
• Battery: lithium-ion 3.7 V / 2200 mAh, providing around 10 sessions on a full charge
• Heating power: maximum 23 W
• Ceramic chamber: ceramic, with 0.7 Ω resistance for efficient and safe heating
• Temperature control: adjustable between 149 °C and 224 °C, to suit individual preferences
• Chamber capacity: around 0.5 g of dry herbs
• Charging: Micro‑USB via a 5 V / 1 A adapter; full charging time – 1 to 1.5 h
• Fast heat-up: under 30 seconds
• Accessory kit: includes 1 device, a cleaning brush, scoop, USB cable, 2 glass tubes and user manual

Recommendations for use

• Charge fully before first use to ensure optimum performance (1–1.5 h).
• Fill the chamber with up to 0.5 g of dry herbs and close the zirconium cap for even heating.
• Choose a temperature to suit your preferences – lower settings for delicate flavour and a 149 °C–224 °C setting for a more intense effect
• Thanks to the OLED display, you can easily monitor the current temperature and device status.
• Keep it clean – cleaning the chamber and accessories ensures a longer service life and reliable performance.

Summary – Benefits

Heating Pipe Solux 1220mm / 240W is a high-quality tubular heater designed to maintain a stable temperature in greenhouses, grow rooms, and other agricultural interior spaces. With a power rating of 240W and a length of 1220 mm, it provides even heat distribution, making it ideal for protecting plants against temperature fluctuations and frost.

🔹 Detailed specifications:

• Model: Solux Heating Pipe 1220mm / 240W
• Power: 240W
• Length: 1220 mm
• Voltage: 220–240V
• Protection: IP55 – resistant to splashes and water jets
• Installation: Suitable for wall or floor mounting
• Temperature control: Can be controlled via a thermostat
• Package contents: Mounting brackets and a cable with plug included

🔹 Recommendations and instructions for use:

• Preparation: Place the heater in the desired location, making sure it is securely fastened.
• Installation: Use the included mounting brackets for easy and secure installation.
• Connection: Connect the heater to the mains using the included cable with plug.
• Control: Using a thermostat to maintain the desired temperature is recommended.

✅ Benefits of use:

• Even heat distribution: Ensures a stable temperature throughout the space.
• Protection against frost: Protects plants from temperature fluctuations and frost.
• Durability: IP55 protection against moisture and dust, suitable for agricultural interior conditions.
• Easy installation: Compact dimensions and included mounting brackets for quick installation

Heating Pipe Solux 90mm / 180W – a high-quality tubular heater designed to maintain a stable temperature in greenhouses, plant rooms, and other agricultural indoor spaces. With a power output of 180W and a length of 90 mm, it provides even heat distribution, making it ideal for protecting plants from temperature fluctuations and frost.

🔹 Detailed specifications:

• Model: Solux Heating Pipe 90mm / 180W
• Power: 180W
• Length: 90 mm
• Voltage: 220–240V
• Protection: IP55 – resistant to splashes and water jets
• Installation: Suitable for wall or floor mounting
• Temperature control: Can be controlled via a thermostat
• Package contents: Mounting brackets and a cable with plug included

🔹 Recommendations and instructions for use:

• Preparation: Place the heater in the desired location, ensuring that it is securely fastened.
• Installation: Use the included mounting brackets for easy and secure installation.
• Connection: Connect the heater to the mains using the included cable with plug.
• Control: Using a thermostat to maintain the desired temperature is recommended.

✅ Benefits of use:

• Even heat distribution: Ensures a stable temperature throughout the space.
• Protection against frost: Protects plants from temperature fluctuations and frost.
• Durability: IP55 protection against moisture and dust, suitable for agricultural indoor conditions.
• Easy installation: Compact dimensions and included mounting brackets for quick installation

Beat boredom with colourful Hemp XXX Amsterdam socks!

• Ideal as a gift.
• Available in various colour variations.
• Material: cotton and polyester.
• Length – standard 40 cm.
• Size: unisex, one size.

Beat boredom with colourful Hemp XXX Amsterdam socks!

• Ideal as a gift.
• Available in various colour variations.
• Material: cotton and polyester.
• Length – standard 40 cm.
• Size: unisex, one size.

Beat boredom with colourful Hemp XXX Amsterdam socks!

• Ideal as a gift.
• Available in various colour variations.
• Material: cotton and polyester.
• Length - ankle-sock style, 22 cm.
• Size: unisex, one size.

Beat boredom with colourful Hemp XXX Amsterdam socks!

• Ideal as a gift.
• Available in various colour variations.
• Material: cotton and polyester.
• Length - ankle-sock style, 22 cm.
• Size: unisex, one size.

Beat boredom with colourful Hemp XXX Amsterdam socks!

• Ideal as a gift.
• Available in various colour variations.
• Material: cotton and polyester.
• Length – standard 40 cm.
• Size: unisex, one size.

Beat boredom with colourful Hemp XXX Amsterdam socks!

• Ideal as a gift.
• Available in various colour variations.
• Material: cotton and polyester.
• Length – standard 40 cm.
• Size: unisex, one size.

Herb Dryer XL is a dryer with a built-in carbon filter and fan, allowing you to dry your herbs or spices easily and efficiently without unwanted odours, in just seven days.

• 99% odour absorption
• optimal airflow
• quiet and reliable fan
• integrated carbon filter
• 5 drying compartments

dimensions:

• diameter: ⌀ 59 cm
• height (full volume): 105 cm
• height (compartments only): 64 cm

Instructions:

1. Remove the HerbDryer from the bag and unfold it until each compartment expands to its full volume.
2. Open the Velcro flap in the square section at the top of the dryer. Insert the carbon filter, then place the fan on top of it (the side with the sticker must face upwards) and close the Velcro flap.
3. Once the filter and fan are in place, hang it using the Velcro strap at the top in your desired location and place your herbs inside to dry.
4. Once the herbs are in place, close the compartment zips and connect the power supply to the mains. The fan will switch on automatically to begin the drying process.

WARNING:

• Keep out of reach of children!
• Not suitable for outdoor use. Indoor use only!
• The device is suitable for use at temperatures between 5°C and 30°C and air humidity levels between 30% and 80%.
• Switch off the device by carefully disconnecting the power supply!
• Use only in dry locations! Do not expose the product to water!
• Use only the power adapter and cable supplied with this product!
• Do not place this device near open flames or heat sources!
• Make sure that the upper part of the filter grille remains free of blockages and debris at all times!
• Make sure the device is unplugged when handling, cleaning or moving it!
• Care must be taken when using this device. Do not attempt to use it unsupervised if you have physical, visual or mental impairments, or lack experience or knowledge!
• The manufacturer accepts no liability for damage or injury resulting from failure to follow these warnings!

POWER SUPPLY WARNINGS:

• Install the power supply indoors only! Install it in a well-ventilated location away from heat sources!
• Do not install or expose the power supply to direct sunlight!
• Do not place the power supply near televisions or monitors!
• Do not handle the power supply or cable with wet or damp hands!
• If the power supply is damaged or has loose wires, do not use this device!

Technical specifications:

• power supply: 1.5A, 12V, 18W
• fan power: 12V, 0.35A