Products

GrowMax GROWMAX 3000 L/day is a reverse osmosis system optimised for gardening and hydroponic applications. Up to 3000 L/day — no waiting, processing up to 125 litres per hour!

• Reduces your EC. Helps stabilise pH.
• Eliminates 95% of salts and heavy metals.
• Eliminates 99% of chlorine and 90% of sediment down to 5 microns, instantly!
• Get 100% efficiency from your nutrients and fertilisers
• Faster-growing and healthier plants, flowers and vegetables.
• Strengthens plant roots.
• Great for organic production!
• Protects beneficial microorganisms in your soil.
• Wastewater-to-purified-water ratio: 2:1

Instructions for use here!

Information about the Reverse Osmosis Membrane here!

Troubleshooting the Reverse Osmosis Membrane here!

GrowMax GROWMAX 3000 L/day can reduce contaminants by 99%. This system is intended for hydroponic or gardening applications and is designed to provide maximum water flow from the membrane.

Recommended conditions for the water used:

• Water temperature: 25°C
• Water pressure: 60 psi / 4.3 kg/cm³
• TDS (Total Dissolved Solids): 500 ppm / 0,7 EC

Therefore, production will increase or decrease according to changes in the conditions listed above.

Removes or reduces: salts, heavy metals, chloramines, nitrates, nitrites, chlorine, sediment, dirt, rust, oxidation, herbicides and pesticides, volatile organic contaminants (chemical pollutants, benzenes, toluene, oils, trihalomethanes, detergents, polychlorinated biphenyls)

When to replace the filters:

• carbon filter - approximately every 25000 litres of treated water, or according to use
• membrane – membrane lifespan is between 6 months and 2 years, depending on water quality and replacement of the carbon filter, because chlorine is completely unsuitable for the membrane

*If the carbon filter is clogged, this will also have an effect and shorten the membrane's lifespan.

Warranty:

• The product has a 1-year warranty.
• When you register your product here, you will automatically receive one more year of warranty for your product, for a total of 2 YEARS PRODUCT WARRANTY.

GrowMax ECO GROW 240 L/h two-stage water filtration system is perfect for houseplants and small indoor gardens.

• Eliminates 99% of chlorine and 90% of sediment down to 5 microns, instantly!
• Faster-growing and healthier plants, flowers and vegetables.
• Strengthens plant roots.
• Great for organic production!
• Protects beneficial microorganisms in your soil.
• Get 100% efficiency from your nutrients and fertilizers.

Full product information here!

This system is designed as a standalone filter for the immediate removal of chlorine and sediment from water. It is rated to remove up to 99% of chlorine and can clean up to 90% of sediment above 5 microns. Having chlorine- and sediment-free water is essential for growing healthy plants and maintaining beneficial microorganisms, bacteria and fungi in the root zone and growing media. These microbes cannot survive in the presence of chlorine. Chlorine-free water is also essential for organic fruit and vegetables, hydroponics and every method of organic gardening in general. This filter is not designed to reduce the parts per million (PPM) of your water. Most of these PPM particles are minerals, which can only be removed by reverse osmosis systems.

REMOVES: chlorine, sediment, dirt, rust, oxidising herbicides and pesticides, volatile organic contaminants (chemical contaminants, benzenes, toluene, oils, trichloromethanes, detergents, polychlorinated biphenyls)

When to replace the filters:

• sediment filter - approximately every 8000 litres of treated water or if clogged
• carbon filter – approximately every 12000 litres of treated water or depending on use (see example below*)

*Example use:

• 1 hour per week (960L/month) – replace the filter once a year
• 1 hour per day, 4 days a week (3840L/month) – replace the filter once every 3 months
• 1 hour per day, every day (7200L/month) – replace the filter once every 7 weeks
• 30 minutes per day, every day (3600L/month) – replace the filter once every 3.5 months

*Replacement time is relative, as it depends on the hardness of the water you use.

Warranty:

• The product has a 1-year warranty.
• When you register your product here, you automatically receive another year of warranty, for a total of 2 YEARS PRODUCT WARRANTY.

GrowMax GARDEN GROW 480 L/h, a high-capacity two-stage water filtration system, is designed for larger indoor or outdoor gardens.

• Eliminates 99% of chlorine and 90% of sediment down to 5 microns, instantly!
• Faster-growing and healthier plants, flowers and vegetables.
• Strengthens plant roots.
• Great for organic production!
• Protects beneficial microorganisms in your soil.
• Get 100% efficiency from your nutrients and fertilizers.

Full product information here!

This system is designed as a standalone filter for the immediate removal of chlorine and sediment from water. It is rated to remove up to 99% of chlorine and can clean up to 90% of sediment above 5 microns. Having chlorine- and sediment-free water is essential for growing healthy plants and maintaining beneficial microorganisms, bacteria and fungi in the root zone and growing media. These microbes cannot survive in the presence of chlorine. Chlorine-free water is also essential for organic fruit and vegetables, hydroponics and every method of organic gardening in general. This filter is not designed to reduce the parts per million (PPM) of your water. Most of these PPM particles are minerals, which can only be removed by reverse osmosis systems.

REMOVES: chlorine, sediment, dirt, rust, oxidising herbicides and pesticides, volatile organic contaminants (chemical contaminants, benzenes, toluene, oils, trihalomethanes, detergents, polychlorinated biphenyls)

When to replace the filters:

• sediment filter – approximately every 16000 litres of treated water or if it is clogged
• carbon filter – approximately every 25000 litres of treated water or according to its use (see the example below*)

*Example use:

• 1 hour per week (1920 L/month) – replace the filter 1 time per year
• 1 hour per day, 4 days per week (7680 L/month) – replace the filter 1 time every 3 months
• 1 hour per day, every day (14400 L/month) – replace the filter 1 time every 7 weeks
• 30 minutes per day, every day (7200 L/month) – replace the filter 1 time every 3.5 months

*Replacement time is relative, as it depends on the hardness of the water you use.

Warranty:

• The product has a 1-year warranty.
• When you register your product here, you will automatically receive one more year of warranty for your product, for a total of 2 YEARS PRODUCT WARRANTY.

GrowMax MAXQUARIUM 000 PPM 500 l/day is a reverse-osmosis / deionisation system designed for aquariums and aquaponics. Up to 500 l/day of super-pure water!

• Up to 20 litres of ultra-pure water per hour!
• Make sure your aquatic animals receive the best water.
• Easier maintenance of water quality (pH, nitrates and alkalinity).
• Ultra-pure water helps you maintain minimal algae growth and a balanced pH level.
• Eliminates 100% of salts and heavy metals.
• Eliminates 99% of chlorine and 90% of sediment down to 5 microns, instantly!
• Provides 000 ppm / EC - 0 pure water
• Great for organic production!

Instructions for use here!

Information about the Reverse Osmosis Membrane here!

Troubleshooting the Reverse Osmosis Membrane here!

GrowMax MAXQUARIUM 000 PPM 500 l/day is a reverse-osmosis + deionisation system optimised for aquarium, hydroponic and aquaponic applications. It eliminates up to 99% of chlorine and reduces sediment to 5 microns. It also eliminates up to 100% of all salts and heavy metals, providing 000 ppm / EC - 0 pure water. This system is designed to provide the maximum membrane flow rate.

Recommended conditions for the water used:

• Water temperature: 25°C
• Water pressure: 60 psi / 4.3 kg/cm³
• TDS (Total Dissolved Solids): 500 ppm / 0,7 EC

Therefore, production will increase or decrease according to changes in the conditions listed above.

Removes or reduces: salts, heavy metals, chloramines, nitrates, nitrites, chlorine, sediment, dirt, rust, oxidation, herbicides and pesticides, volatile organic contaminants (chemical pollutants, benzenes, toluene, oils, trihalomethanes, detergents, polychlorinated biphenyls)

When to replace the filters:

• sediment filter - approximately every 8000 litres of treated water or if clogged
• carbon filter – approximately every 12000 litres of treated water or depending on use
• membrane – membrane lifespan is between 6 months and 2 years, depending on water quality and replacement of the carbon filter, because chlorine is completely unsuitable for the membrane

*If the carbon filter is clogged, this will also have an effect and shorten the membrane's lifespan.

Warranty:

• The product has a 1-year warranty.
• When you register your product here, you will automatically receive one more year of warranty for your product, for a total of 2 YEARS PRODUCT WARRANTY.

GrowMax MEGA GROW 1000 l/day  is a reverse-osmosis system optimised for gardening and hydroponic applications. Up to 1000 l/day – no waiting, processing up to 40 litres per hour!

• Reduces your EC. Helps stabilise pH.
• Eliminates 95% of salts and heavy metals.
• Eliminates 99% of chlorine and 90% of sediment down to 5 microns, instantly!
• Get 100% efficiency from your nutrients and fertilisers
• Faster-growing and healthier plants, flowers and vegetables.
• Strengthens plant roots.
• Great for organic production!
• Protects beneficial microorganisms in your soil.
• Wastewater-to-purified-water ratio: 2:1

Instructions for use here!

Information about the Reverse Osmosis Membrane here!

Troubleshooting the Reverse Osmosis Membrane here!

GrowMax MEGA GROW 1000 l/day can reduce the amount of contaminants by 99%. This system is intended for hydroponic or gardening applications. It is built to provide the maximum possible water flow from the membrane.

Recommended conditions for the water used:

• Water temperature: 25°C
• Water pressure: 60 psi / 4.3 kg/cm³
• TDS (Total Dissolved Solids): 500 ppm / 0,7 EC

Therefore, production will increase or decrease according to changes in the conditions listed above.

Removes or reduces: salts, heavy metals, chloramines, nitrates, nitrites, chlorine, sediment, dirt, rust, oxidation, herbicides and pesticides, volatile organic contaminants (chemical pollutants, benzenes, toluene, oils, trihalomethanes, detergents, polychlorinated biphenyls)

When to replace the filters:

• sediment filter – approximately every 12000 litres of treated water or if clogged
• carbon filter – approximately every 12000 litres of treated water or depending on use
• membrane – membrane lifespan is between 6 months and 2 years, depending on water quality and replacement of the carbon filter, because chlorine is completely unsuitable for the membrane

*If the carbon filter is clogged, this will also have an effect and shorten the membrane's lifespan.

Warranty:

• The product has a 1-year warranty.
• When you register your product here, you will automatically receive one more year of warranty for your product, for a total of 2 YEARS PRODUCT WARRANTY.

GrowMax POWER Grow 500 L/day is a reverse-osmosis system optimised for gardening and hydroponic applications. Up to 500 L/day — no waiting, processing up to 20 litres per hour!

• Reduces your EC. Helps stabilise pH.
• Eliminates 95% of salts and heavy metals.
• Eliminates 99% of chlorine and 90% of sediment down to 5 microns, instantly!
• Get 100% efficiency from your nutrients and fertilisers
• Faster-growing and healthier plants, flowers and vegetables.
• Strengthens plant roots.
• Great for organic production!
• Protects beneficial microorganisms in your soil.
• Ratio of waste water to purified water: 2:1

Instructions for use here!

Reverse Osmosis Membrane Information here!

Reverse Osmosis Membrane Troubleshooting here!

GrowMax POWER Grow 500 L/day can reduce contaminants by 99%. This system is designed for hydroponic or gardening applications. It is built to provide the maximum water flow from the membrane.

Recommended conditions for the water used:

• Water temperature: 25°C
• Water pressure: 60 psi / 4.3 kg/cm³
• TDS (Total Dissolved Solids): 500 ppm / 0,7 EC

Therefore, production will increase or decrease according to changes in the conditions listed above.

Removes or reduces: salts, heavy metals, chloramines, nitrates, nitrites, chlorine, sediment, dirt, rust, oxidation, herbicides and pesticides, volatile organic contaminants (chemical pollutants, benzenes, toluene, oils, trihalomethanes, detergents, polychlorinated biphenyls)

When to replace the filters:

• sediment filter - approximately every 8000 litres of treated water or if clogged
• carbon filter – approximately every 12000 litres of treated water or depending on use
• membrane – membrane lifespan is between 6 months and 2 years, depending on water quality and replacement of the carbon filter, because chlorine is completely unsuitable for the membrane

*If the carbon filter is clogged, this will also have an effect and shorten the membrane's lifespan.

Warranty:

• The product has a 1-year warranty.
• When you register your product here, you will automatically receive one more year of warranty for your product, for a total of 2 YEARS PRODUCT WARRANTY.

GrowMax SUPER GROW  800 L/h is a high-capacity two-stage water filtration system, ideal for use in large gardens, nurseries and larger growing operations.

• Eliminates 99% of chlorine and 90% of sediment down to 5 microns, instantly!
• Faster-growing and healthier plants, flowers and vegetables.
• Strengthens plant roots.
• Great for organic production!
• Protects beneficial microorganisms in your soil.
• Get 100% efficiency from your nutrients and fertilizers.

Full product information here!

This system is designed as a standalone filter for the immediate removal of chlorine and sediment from water. It is rated to remove up to 99% of chlorine and can clean up to 90% of sediment above 5 microns. Having chlorine- and sediment-free water is essential for growing healthy plants and maintaining beneficial microorganisms, bacteria and fungi in the root zone and growing media. These microbes cannot survive in the presence of chlorine. Chlorine-free water is also essential for organic fruit and vegetables, hydroponics and every method of organic gardening in general. This filter is not designed to reduce the parts per million (PPM) of your water. Most of these PPM particles are minerals, which can only be removed by reverse osmosis systems.

REMOVES: chlorine, sediment, dirt, rust, oxidising herbicides and pesticides, volatile organic contaminants (chemical contaminants, benzenes, toluene, oils, trihalomethanes, detergents, polychlorinated biphenyls)

When to replace the filters:

• Sediment filter - approximately every 8000 litres of treated water or when clogged
• carbon filter – approximately every 25000 litres of treated water or according to its use (see the example below*)

*Example use:

• 1 hour per week (3200 L/month) - replace the filter 1 time every 8 months
• 1 hour per day, 4 days per week (12800 L/month) - replace the filter 1 time every 2 months
• 1 hour per day, every day (24000 L/month) - replace the filter every month
• 30 minutes per day, every day (12000 L/month) - replace the filter 1 time every 2 months

*Replacement time is relative, as it depends on the hardness of the water you use.

Warranty:

• The product has a 1-year warranty.
• When you register your product here, you will automatically receive one more year of warranty for your product, for a total of 2 YEARS PRODUCT WARRANTY.

GrowStream 60

Aeroponic system with sixty growing sites. Known for its high yields, GrowStream is now available on the Bulgarian market. GrowStream aerates the nutrient solution exceptionally well, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resilient and optimises their productivity. Each system includes instructions and a free T.A Flora Gro+Bloom+Micro x 1L kit

• Dimensions: 325/100/56 cm (3 m²)
• Effective capacity: 240 l

GrowStream 60

Aeroponic system with sixty growing sites. Known for its high yields, GrowStream is now available on the Bulgarian market. GrowStream aerates the nutrient solution exceptionally well, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resilient and optimises their productivity. Each system includes instructions and a free T.AFlora Gro+Bloom+Micro x 1L kit

• Dimensions: 325/100/56 cm (3 m²)
• Effective capacity: 240 l

Countless gardeners, scientists and researchers are confident that no other system delivers such good results. NASA scientists have used these systems for 15 years to explore the possibilities of hydroponic methods. AeroFlo systems are modular and expandable and readily adapt to different applications: GS14 fits easily on a balcony or even behind a window; GS60, with its large reservoir, is suitable for a greenhouse; GS20 and GS28 are low enough to fit in a polytunnel or home greenhouse; GS56 B and GS84 B are even lower (32 cm), suitable for more professional needs. T.A also delivers custom projects according to customer requirements.

Calibration solution for conductivity (EC) measuring devices – pens, monitors and controllers.

• preset EC value: 1.413 mS/cm
• suitable for Bluelab®
• volume: 300 ml

Electrical conductivity (EC) meters must be calibrated regularly. Follow the instructions supplied with the meter. After use, always rinse the probe with clean water and dry it with a tissue.
The Bluelab Truncheon EC meter does not require calibration! However, it should be checked regularly with this solution. If the reading is low or different from 2.76 mS/cm, the probe tip must be cleaned carefully; also check the batteries.

Storage conditions:

1. Store in a cool place!
2. Keep out of reach of children!

Buffer solution for calibrating pH measuring devices – pens, monitors and controllers.

• preset accurate and stable pH value: 4.0
• suitable for Bluelab®
• volume: 300 ml

pH measuring devices must be calibrated regularly. Follow the instructions supplied with the device.

For 2-point calibration, use pH Buffer 4 and pH Buffer 7, unless the instructions state otherwise. Store the probe in Growth Technology pH probe storage solution.

Storage conditions:

1. Store in a cool place!
2. Keep out of reach of children!

Buffer solution for calibrating pH-measuring devices - pens, monitors and controllers.

• pre-set, accurate and stable pH value: 7.0
• suitable for Bluelab®
• volume: 300 ml

pH measuring devices must be calibrated regularly. Follow the instructions supplied with the device.

For 2-point calibration, use pH Buffer 4 and pH Buffer 7, unless the instructions state otherwise. Store the probe in Growth Technology pH probe storage solution.

Storage conditions:

1. Store in a cool place!
2. Keep out of reach of children!

GSE Temperature and Minimum Speed Controller 10A is a controller for managing the speed of one or more exhaust fans used in indoor growing spaces.

• maintains a constant room temperature
• creates a continuous minimum speed to prevent odour leakage
• max. current: 10.0A
• max. load: 2300W

Setting range:

• temperature: 20C° to 30C°
• min. speed: off, 20% to 100%

Technical specifications:

• dimensions W/H/D: 130x92x105mm.
• max. current: 10.0A
• max. load: 2300W
• temperature sensor with 4m. cable
• voltage: 230V, 50Hz

Instructions:

1. Use the temperature adjustment knob to set the desired temperature, for example 24°C.
2. Use the second knob to set the minimum speed, which must never fall during regulation; for example, we set this to 20%.
3. The minimum-speed setting is the strongest setting and always overrides the temperature setting. If you set the minimum-speed setting to OFF, the fan will stop operating when the measured temperature is below the set temperature. The minimum-speed setting has a 20% start-up peak to give the fan enough power to operate at low speed.
4. Hysteresis is a fixed value of 2°C. Hysteresis is the controlled range of fan speed. Within these 2°C, the fan speed changes from the lowest point set by the minimum-speed setting to the highest regulation point, 100% fan speed, depending on the temperature.
5. While the temperature measured by the sensor is below your setting (24°C), the minimum-speed controller keeps the fan operating according to the minimum-speed setting (20%). When the temperature rises above 24°C, the temperature LED turns on and fan speed begins to increase according to the temperature over the next 2°C up to 100%, until it reaches 26°C.
6. Small fans can vary from 0-100%, but if power consumption is higher (large fans), the controller operates semi-variable and automatically switches to 100% without variable control. The controller remains on until the temperature drops.
7. Warning! A high minimum-speed setting with large fans will operate at 100% because of the internal overheat protection! Reduce the minimum speed!

Setting range:

• temperature: 20C° to 30C°
• min. speed: off, 20% to 100%

GSE temperature and minimum-speed controller with 5A socket is a regulator for controlling the speed of one or more extract fans used in indoor growing spaces.

• maintains a constant room temperature
• creates a continuous minimum speed to prevent odour leakage
• max. current: 5.0A
• max. load: 1150W

Setting range:

• temperature: 20C° to 30C°
• min. speed: off, 20% to 100%

Technical specifications:

• dimensions W x H x D: 75x110x90mm.
• max. current: 5.0A
• max. load: 1150W
• temperature sensor with a 2m. cable
• voltage: 230V, 50Hz

Setting range:

• temperature: 20C° to 30C°
• min. speed: off, 20% to 100%

Installation:

• Plug the fan into socket (5). Connect the temperature sensor (7), which is supplied with a 2m cable, to the controller, then choose the sensor location where you want to take the measurement.
• Ensure it is not directly exposed to a heat source or a flow of light to obtain the most accurate measurement of the surrounding air. Now plug the controller plug (6) into an external outlet. The controller initializes; this can take up to 10 seconds. The green power LED (3) flashes and the fans operate at 50% power. After initialization, the green power LED (3) remains continuously lit — the controller regulates from that point onward.

Instructions:

1. Use the temperature-setting knob (1) to set the desired temperature, for example 24°C.
2. Use the second knob to set the minimum speed (2), below which the speed must never fall during regulation; for example, set it to 20%.
3. The minimum-speed setting has priority and always overrides the temperature setting. If you set the minimum-speed setting (2) to OFF, the fan stops when the measured temperature is below the set temperature. The minimum-speed setting (2) has a 20% start-up boost to give the fan sufficient power to run at low speed.
4. Hysteresis is a fixed value of 2°C. Hysteresis is the controlled fan-speed range. Within these 2°C, the fan speed changes from the lowest point set by the minimum-speed setting (2) to the highest regulation point, 100% fan speed, depending on temperature.
5. While the temperature measured by sensor (7) is below your setting (24°C), the minimum-speed controller keeps the fan running at the minimum-speed setting (20%). When the temperature rises above 24°C, the temperature LED (4) turns on and the fan speed begins to increase according to temperature over the next 2°C to 100%, until it reaches 26°C.
6. Small fans can vary from 0-100%, but if power consumption is higher (large fans), the controller operates semi-variable and automatically switches to 100% without variable control. The controller remains on until the temperature drops.
7. Warning! Setting a high minimum speed with large fans will make them run at 100% due to the internal overheating protection! Reduce the minimum speed!

Controller with settings for temperature, minimum speed and negative pressure, controlling inlet and outlet air fans.

Dimensions and technical data:

• Product dimensions: W80xH80xD130mm
• Package dimensions: W150xH110xD170mm
• Designed for: 2A / 2x200W / TRIAC 2x16A
• Voltage: 230V / 50HZ
• The 5V digital sensor measures temperatures from –55°C to +125°C (–67°F to +257°F )
• 0.5°C Accuracy from –10°C to +85°C
• Protection rating: IP54

Setting range:

• Temperature: from 20C° to 30C°
• Minimum speed: off, 20%, 100%
• Negative pressure: 100% to 50%

Instructions for use here!

• The controller manages one or two fans – one for inlet air and one for outlet air, or two for outlet air. Connect the exhaust fan to "Fan 1" and the intake fan to "Fan 2". Set the desired temperature value.
• The "Minimum Speed" setting sets the exhaust fan's minimum speed as a percentage of its maximum speed. At "Off", ventilation stops when not needed; at any other value, it runs at the set speed.
• The "Negative Pressure" setting sets the intake fan speed as a percentage of the exhaust fan speed. If you use this controller for 2 exhaust fans, set it to 100%; otherwise, determine the suitable value experimentally.
• As the temperature rises, fan speed increases gradually, reaching 2° 100% higher. As it decreases, the speed also drops to the value set by "Minimum Speed".
• Maintains a constant temperature, and negative pressure keeps odours contained.
• Can be used for two exhaust fans if the room has unrestricted air access.
• Ready to use and reliable, with a waterproof enclosure, socket covers and a low-voltage sensor, making it ideal for humid rooms.
• The sensor has a 4m cable, which can be extended to 50m.

The controller continuously maintains the set temperature and prevents operation below the specified minimum speed or above the permitted maximum speed.

Step transformer that lets you control fans without the low-frequency noise at low speed.

Its six control steps provide better control of the extraction fan according to your selected temperature and humidity settings.

The four buttons allow adjustment of temperature, temperature hysteresis, humidity and humidity hysteresis.
Using the built-in J1 jumper (inside the enclosure), you can choose whether, once the desired temperature and humidity are reached, the fan continues at minimum speed or stops. When J1 is closed, ventilation continues at minimum speed. When it is open, the fan stops completely.

It is supplied with a 4m cable with temperature and humidity sensor, extraction-fan socket and waterproof enclosure.

- temperature range: 20C° - 30C°
- temperature hysteresis: 2C°-8C°
- humidity range: 30% - 100%
- humidity hysteresis: 6%-30%
- size: 265mm x 300mm x 205mm
- max. power: 2,5A
- voltage: 230V / 50HZ
- 5V digital sensor measures temperatures from –55°C to +125°C (–67°F to +257°F)
- accuracy: 0,5C° in the range from -10C° to +85C°; ±4,5%rh
- protection rating: IP54
 

A step transformer that lets you control fans without low-frequency noise at low speed.

Its six control steps provide better control of the exhaust fan according to your selected temperature settings.

Two knobs allow you to set the temperature and temperature hysteresis.
Using the built-in J1 jumper (inside the housing), you can choose whether, once the desired temperature is reached, the fan continues at minimum speed or stops. When J1 is closed, ventilation continues at minimum speed. When it is open, the fan stops completely.

It is supplied with a 4m cable with a temperature and humidity sensor, an exhaust-fan outlet and a waterproof enclosure.

- temperature range: 20C° - 30C°
- temperature hysteresis: 2C°-8C°
- dimensions: 265mm x 300mm x 205mm
- max. power: 2,5A
- voltage: 230V / 50HZ
- Digital 5V sensor measures temperatures from –55°C to +125°C (–67°F to +257°F)
- Accuracy: 0,5C° within the range of -10C° to +85C°; ±4,5%rh
- protection rating: IP54