Wassertech Digital Water Timer

Wassertech Digital Water Timer

Wassertech water timer for all irrigation systems — analogue and digital versions. An excellent solution for watering your garden! See below for instructions for both models.

Technical data:

Power supply: 2 AAA batteries (3V total) — not included. Current up to 18μA. Use high-power alkaline batteries. Up to 6 months of normal operation with 1 set. Replacement indicator. Accuracy: 0.25 sec/24h (for the digital model)

Operating temperature: 5-60˚C

Pressure: 0.05-0.8 bar (50cm to 8m water column); 25mm threaded inlet, threaded / quick-connect outlet. Tighten by hand only! Install vertically!

DIGITAL MODEL BUTTONS AND DISPLAY: keypad lock/unlock: press ESC for 3 sec. Setting the day and time: unlock the keypad, hold TIEMPO and set with DIA (day), HORA (hour), MIN — single press for +1, hold for more; the ESC button clears the input; MAN/AUTO selects between manual and automatic mode. SETTING: Press PROG once. The display shows 1 ON. Use HORA and MIN to select the hour and minutes for the start of programme 1. Use DIA to select the days on which programme 1 will run (the default is every day). See below for the possible day combinations. Press PROG again. The display shows 1 OFF. Use HORA and MIN to select the hour and minutes for the end of programme 1. That is all if you want one watering cycle per day. If you press PROG again, the display shows 2 ON and you will set a second programme. For more watering cycles, you can set up to 8 programmes, each running on specified days. Make sure that the on and off settings are for the same days! Make sure every on setting has an off setting! To exit the settings mode, press TIEMPO and you will return to the clock.