Trotec TTK 125 S professional dehumidifier

Trotec TTK 125 S is a professional dehumidifier suitable for large commercial spaces, construction sites (used for drying plaster), and more.

• Development, design, manufacture: 100% Trotec, Germany.
• High dehumidification performance even at low temperatures.
• Maximum protection from dust and moisture for all electrical components.
• Very easy-to-maintain construction.
• Optimal control.
• Portable and easy to store anywhere thanks to its rotary compressor.
• Proven German industrial design – protected prototype.

• suitable for rooms: up to 60 m² / 150 m³
• max. dehumidification: 32 L / 24 h
• water-tank capacity: 6 L
• max. power: 0.5 kW

Full instructions for use (English): here*

TTK 125 S – special features:

1. Clearly arranged control panel – protected by safety grilles.
2. The standard operating-hours counter for the TTK 125 S commercial dehumidifier is optionally available as a dual operating-hours and kilowatt-hour counter.
3. A special housing reliably protects the electronics of the TTK 125 S dehumidifier from unauthorised operation.
4. Two stacking grooves allow TTK-S commercial dehumidifiers of the same size to be stacked securely to save space.
5. TTK 125 S automatically ensures that the set target value is maintained consistently. When this value is exceeded, the unit switches off automatically and switches on again automatically when the value falls below the set target. The target value can be preselected between 50% and 90%, depending on the room air humidity value to be reached.
6. TTK 125 S is equipped with an automatic defrost function. When the room temperature is below 11 °C, the evaporator freezes during dehumidification. Therefore, TTK 125 S performs fully automatic self-defrosting when necessary.
7. TTK 125 S has a memory function. This allows the unit to restart with the preselected setting after an unexpected shutdown caused by a power interruption, as soon as power is available again.
8. For continuous condensate drainage, a hose can be connected at the rear of the unit. This is especially suitable for basements or storage rooms exposed to mould formation from excess humidity.
9. Through its automatic hygrostat-controlled operation, the TTK 125 S commercial dehumidifier ensures an optimal room climate, for example in storage halls. The target humidity value can be preselected in percentage increments and is then displayed together with the current actual value.
10. TTK 125 S is also an excellent choice for water-damage restoration. In such cases, the drying process can be significantly accelerated, which in turn greatly reduces mould formation. The air hose also makes it possible to dry cavities.

Technical data:

• Dehumidification at 20°C and 60% RH: 11 L / 24 h
• Dehumidification at 30°C and 80% RH: 28 L / 24 h
• Max. dehumidification capacity: 32 L / 24 h
• Operating range (temperature): 5 - 32°C
• Operating range (relative humidity): 50 - 90% RH
• Max. permissible pressure: 3.1 MPa
• Airflow: 250 m³/h
• Recommended room size for construction drying: up to 60 m² / 150 m³
• Mains supply: 220-240 V / 50 Hz
• Max. power: 0.5 kW
• Current: 2.4 A
• Water tank capacity: 6 L
• Refrigerant: propane R290*; 150 g
• GWP factor: 3
• CO₂ equivalent: 0.00045 t
• Noise level (at 1 m from the unit): 52 dB(A)
• Dimensions L/W/H: 375 x 345 x 603 mm
• Min. clearance from walls or other objects: 50 cm
• Weight: 26 kg