Lighting — Promotions

Secret Jardin Cosmorrow LED 20W PPE2.4 L50cm Blooming is a single LED bar for the flowering stage of indoor-grown plants. The power supply is not included and is sold separately! You can buy it here!

 

• for flowering
• power: 20W
• voltage: 24V
• efficiency: 2.4µmol/s
• coverage area: 60 x 40cm (when suspended 15cm above the top of the plants)
• water resistance: IP65
• warranty: 1 year

Technical specifications:

 

• for flowering
• power: 20W
• voltage: 24V
• current: 0.83A
• efficiency: 2.4µmol/s
• coverage area: 60 x 40cm (when suspended 15cm above the top of the plants)
• water resistance: IP65
• dimensions: 47 x 3.2 x 1.5 cm
• weight: 0.16kg

Lumatek LED Zeus Compact 465W is a complete LED lighting system which, with its PPF of 1070µmol/s and efficiency of 2.3µmol/J, is perhaps one of the best products currently available on the market. The light it produces, with a balanced full spectrum, makes it ideal and sufficient for use throughout all stages of plant development—from germination, through seedlings, cloning or vegetative growth, right to the end of the flowering period for indoor-grown crops.

 

Why Lumatek LED:

1. You save up to 40% on electricity, because less heat is generated in the room and consequently less cooling is required.
2. Gardeners growing with LED lighting notice improved crop quality as well as a higher final yield.
3. Provides 60 000 hours of operation and a 5-year warranty.

• Balanced full-spectrum light
• ​High efficiency: 2.3µmol/J
• PPF: 1070µmol/s
• Power consumption: 465W
• Coverage area: 1.2 x 1.2m.
• Lifespan: 60 000 hours
• Light source: Osram and Lumileds Philips diodes
• Fully dimmable: OFF, 25%, 50%, 75%, 100%
• Dimensions: 998x900x51.9mm.
• Weight: 11kg.

As technology advances, high-quality LED horticultural lighting is now a reliable option for growers, offering a significant return on investment. Lumatek full-spectrum LED products balance light quality (spectra) with quantity (intensity and duration) sufficiently to provide a single-source lighting solution for the entire growing cycle, from vegetative growth through flowering.
The linear arrangement of LEDs creates even light distribution at a short distance from the crop, enabling single-source lighting for multilayer growing systems, single benches in low rooms and grow tents.
Zeus is built using high-quality Lumatek drivers and top-bin Osram and Lumileds Philips LEDs, generating full-spectrum light ideal for the vegetative and flowering cycle.
For different stages of the plant – germination, propagation or vegetative growth – the power of the Lumatek LED Zeus Compact 465W can be adjusted, without losing efficiency. The highly efficient, low-powered LED configuration with five 93W LED bars reduces LED temperature, increasing output and improving light maintenance.

 

Technical specifications:

 

• Balanced full-spectrum light
• ​High efficiency: 2.3µmol/J
• PPF: 1070µmol/s
• Power consumption: 465W
• Coverage area: 1.2 x 1.2m.
• Light distribution: 120°
• Lifespan: 60 000 hours
• Light source: Osram and Lumileds Philips diodes
• Fully adjustable with 0-10V light dimmer (included): OFF, 25%, 50%, 75%, 100% 
• Waterproof: IP65
• Input voltage: 200-240V, 50-60Hz
• Dimensions: 998x900x51.9mm.
• Weight: 11kg.

 

Full instructions for use: here*

 

Full technical specifications: here*

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal-halide (MH) lamps

 

Size: Ø150 mm

Length: 890 mm for two bulbs 

LUMATEK 600W 240V CONTROLLABLE BALLAST is a digital controllable ballast that can operate with both high-pressure sodium (HPS) and metal-halide (MH) lamps. It provides stable and precise voltage to the lamp, creating higher PAR/PPF output and is nevertheless far more energy efficient than most ballasts on the market! The ballast features intelligent start technology and a soft-dimming mechanism! It can be externally controlled with LUMATEK Control Panel Plus 2.0 (sold separately).

 

• Output power: 600W
• 4 operating modes: 250W - 400W - 600W - 660W
• generates very little heat compared with other ballasts on the market
• operates silently
• Protection against short circuit, overheating, overvoltage / undervoltage, end of lamp life!
• 5-year warranty!

An electronic ballast is a solution to the problem of irregular voltage in the power grid! Magnetic ballasts age over time, begin to make noise and consume more electricity, heat up more and more while their light output decreases. This does not happen with digital ballasts—they maintain the same level of output and efficiency. LUMATEK ballasts are programmed for “soft start”, meaning no voltage or current peak is required to start the lamp; this extends bulb life, does not overload the electrical installation and allows a larger number of ballasts to start safely at the same time.

 

Full technical specifications:

 

• Output power: 600W
• Input voltage: 240V, 50/60Hz
• Maximum current: 2.7A
• power factor*: > 0.99
• Efficiency: 96%
• THD*: < 8%
• Dimming capability / 4 operating modes: 250W - 400W - 600W - 660W
• Compatible with: 250W, 400W, 600W HPS / MH lamps
• Operating frequency: high frequency
• generates very little heat compared with other ballasts on the market
• operates silently
• Protection against short circuit, overheating, overvoltage / undervoltage, end of lamp life!
• Dimensions: 310 x 114 x 81mm
• Weight: 2.7kg
• warranty: 5 years

 

Operating instructions:

 

• For use with a 250W HPS or MH lamp: the ballast must be always and only in 250W mode!
• For use with a 400W HPS or MH lamp: the ballast must never be in 600W or 660W mode!
• For use with a 600W HPS or MH lamp: Start in 600W mode and only after the lamp has fully warmed up (after approximately 10min. of operation), can you switch to 660W mode!

1. Disconnect the power when changing the lamp!
2. LUMATEK recommends replacing the lamp after 6-12 months of operation!
3. VERY IMPORTANT: allow the lamp to cool completely (20-30min.) before switching it on again! (Doing otherwise shortens its life.)
4. Also, do not switch the lamp off before it has reached full power!

Adjust-A-Wings AVENGER Large reflector is the best and best-selling product from Adjust-A-Wings. Its super-reflective surface is vapour-coated with molten glass, titanium dioxide and PVD / ceramic, providing an enormous light reflectance of 95-97%. This is the most reflective and durable reflective surface on the market and can retain its full light reflectance for 20 years.

• Coverage area: 3.89 m²
• Overall dimensions at the widest setting 100 cm x 70 cm
• Perfect for one 1000W / two 400W / two 600W sodium / metal-halide lamps

 

Feature:

 

• Twice the power and efficiency of most other reflectors
• Corrosion-resistant
• 97% light reflectance
• Super alloy with glass coating
• Supplied with Super Spreader

 

Adjust-A-Wings® reflectors are efficient and multifunctional. They can be adjusted to different configurations according to your needs – a wider light beam for lower placement, or a more concentrated beam for higher mounting. They are constructed with a minimum of moving parts. The double-parabolic shape helps achieve even light distribution. The movable socket allows the bulb to be positioned at different focal distances to adapt to different bulb sizes or reflector shapes. By adding the Super-Spreader™ (a mesh reflector beneath the bulb), Adjust-A-Wings reflectors can be placed even closer to plants to achieve maximum lighting levels without creating a higher-intensity hot spot and overheating directly beneath the reflector.

AVENGER is one of the best reflectors in the world, on the market since 2003. It has excellent reflectance (95-97%) thanks to a special surface layer of glass and titanium dioxide, which protects the surface against corrosion and clouding for up to 20 years.

Dimensions in the widest position: 100cm x 70cm

LUMii Solar Pro 315W + 5m cable indoor growing lighting kit. The set consists of:

 

• LUMii SOLAR 315 W CDM Ballast 1 pc.
• LUMii SOLAR 315W Reflector – Wide Angle Version 1 pc.
• 5 m cable (connecting the ballast and reflector)

 

Note: the set does not include a bulb!

Metal-halide / MH bulb / lamp for the growth / vegetative phase.

Metal-halide lamp, suitable for plants in the vegetative stage. Connects to a 1000W ballast.

Enhanced blue-spectrum output for lush growth.

• Socket: E40
• Coverage area: 2.25m²
• Luminous flux: 100 000 lm
• Luminous efficacy: 100 lm/W
• Lifetime: 10 000 hours
• Colour temperature: 4000 K

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Warning:

• The cable connecting the ballast to the reflector must be no longer than 2m!

Lumatek MH Lamp 400W 240V is a pulse-start* metal halide lamp for growth / vegetation. It is made from durable quartz, allowing the lamp to operate at higher internal temperatures and increasing power and efficiency. Pulse-start technology enables faster start and restart times, longer lamp life and increased PAR / PPF output maintenance.

• for growth
• power: 400W
• current: 4.6 A
• life span: 10 000 h
• luminous flux: 35 000 lm
• colour temperature: 6000 K
• efficiency: 88 lm/W
• PPF: 500μmol/s
• power supply: 240V, 50Hz
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Warning:

• The cable connecting the ballast to the reflector must be no longer than 2m!

LUMII Cord Set with a 4 m cable is a high-quality, versatile power set designed for convenient and safe connection of your lighting systems. This set includes a standard E40 lampholder and a 4-metre power cable, providing ample length for maximum installation flexibility. The E40 lampholder is compatible with many lamp types, including sodium and metal-halide lamps, making it versatile for different applications. LUMII Cord Set is made from high-quality materials that ensure years of use and exceptional reliability. The cable has wear- and heat-resistant insulation that protects the conductors and ensures safe operation. Installation is quick and easy thanks to the integrated metal bracket for securing the cable to the reflector. Whether you are a beginner gardener or a professional grower, this set helps you install and power your lighting systems with ease and confidence. Overall, the LUMII Cord Set with a 4 m cable is an indispensable part of any lighting system, offering quality, reliability and convenience you can rely on.

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal-halide (MH) lamps. It combines the cooling capability of CoolTube with a large reflective surface. Use Ø150mm air ducts when connecting several reflectors in series.

PHILIPS GreenPower CDM-TP 315W/930  is a latest-generation ceramic discharge metal-halide (CDM) or ceramic metal-halide (CMH) lamp. The bulb emits long-lasting white light with a colour temperature of 3000K, making it ideal for use during the vegetative stage of plants grown indoors or outdoors.

• for the vegetative stage
• power: 315W
• consumption: 347kWh/1000h
• colour temperature: 3000K
• luminous flux: 36 200lm
• efficacy: 115 lm/W
• lamp base: PGZ18
• starting: connects to a special adapter* and ballast* (sold separately)

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Full technical specifications: here*

 

Warning:

• The cable connecting the ballast to the reflector must be no longer than 2m!

LUMii SOLAR 315W CMH FIXTURE lighting kit, which includes:

 

• Electronic ballast + reflector

LUMii Digita 1000W Electronic Ballast is an electronic/digital ballast with dimming capability (reducing or increasing power) for 1000W high-pressure sodium (HPS) or metal-halide (MH) lamps. LUMii Digita 1000W Electronic Ballast is an electronic ballast with a built-in microprocessor that controls and operates at a higher frequency than standard analogue ballasts. Higher efficiency means more light for your plants. It enables rapid lamp ignition, saving energy. Quieter than any other ballast. Measurements indicate up to 30% more brightness than analogue ballasts. The electronic ballast solves the problem of irregular mains voltage. Analogue ballasts age over time, become noisy, consume more electricity and heat up more while their light output decreases. This does not happen with electronic ballasts: they maintain the same emission level and efficiency. For safe operation, the LUMii ballast is programmed to switch off in case of a short circuit, lamp failure or a missing lamp.

 

​

• Operating modes with a 1000W lamp: 250W, 400W, 600W, 1000W
• Operating modes with a 600W lamp: 250W, 400W, 600W, do not dim above 600W!
• operating modes with a 400W lamp/bulb: 250W, 400W, do not "dim" above 400W!
• operating modes with a 250W lamp/bulb: 250W, do not "dim" above 250W
• Supply voltage: 220–240V 50Hz
• Current: 4.6A
• ​Dimensions L/W/H: 48/39.5/24.5 cm
• Weight: 5.2 kg
• Warranty: 1 year

 

Disconnect the power when changing the lamp!

LUMATEK 1000W 240V CONTROLLABLE BALLAST is a digitally controllable ballast that can operate with both sodium (HPS) and metal-halide (MH) lamps. It provides stable, precise voltage to the lamp, delivering higher PAR/PPF output while being far more energy-efficient than most ballasts on the market. The ballast features intelligent start technology and a soft-dimming mechanism. It can be externally controlled with the LUMATEK Control Panel Plus 2.0 (sold separately).

 

• output power: 1000W
• 4 operating modes: 600W - 750W - 1000W - 1000W SL
• generates very little heat compared with other ballasts on the market
• operates silently
• Protection against short circuits, overheating, overvoltage / undervoltage and end of lamp life!
• 5-year warranty!

An electronic ballast is a solution to the problem of irregular mains voltage. Magnetic ballasts age over time, become noisy and consume more electricity, while heating up ever more as their light output declines. This does not happen with digital ballasts: they maintain the same output and efficiency. LUMATEK ballasts are programmed for a “soft start”, meaning no voltage or current spike is required to start the lamp. This extends bulb life, does not strain the electrical installation and enables more ballasts to be started safely at the same time.

 

Full technical specifications:

 

• output power: 1000W
• Input voltage: 240V, 50/60Hz
• max. current: 4.7A
• power factor*: > 0.99
• THD*: < 10%
• dimming capability / 4 operating modes: 600W - 750W - 1000W - 1000W SL
• compatible with: 600W, 750W, 1000W HPS / MH lamps
• operating frequency: high frequency
• generates very little heat compared with other ballasts on the market
• operates silently
• Protection against short circuit, overheating, overvoltage / undervoltage, end of lamp life!
• dimensions: 318 x 166 x 96mm
• weight: 4.25 kg
• warranty: 5 years

 

Operating instructions:

 

• for use with a 600W HPS or MH lamp: the ballast must always be set to 600W mode only!
• for use with a 750W HPS or MH lamp: the ballast must never be set to 1000W or 1000W SL mode!
• for use with a 1000W HPS or MH lamp: start in 1000W mode and only after the lamp is fully warmed up (after around 10 min. of operation), you can switch to 1000W SL mode!

1. Disconnect the power when changing the lamp!
2. LUMATEK recommends replacing the lamp after 6-12 months of operation!
3. VERY IMPORTANT: allow the lamp to cool completely (20-30min.) before switching it on again! (Doing otherwise shortens its life.)
4. Also, do not switch the lamp off before it has reached full power!

Secret Jardin TNoled 2x20W Blooming is a complete LED lighting set for the flowering stage of indoor-grown plants. TNoled technology successfully replaces bulky fluorescent CFL and T5 bulbs of the recent past. 

 

• for flowering
• power: 40W
• voltage: 24V
• efficiency: 2.0µmol/s
• coverage area: 60 x 40cm (when suspended 15cm above the plant tops)
• dimming option: yes
• water resistance: IP65
• sturdy and drop-resistant
• dimensions L/W/H: 50 x 12 x 4cm
• warranty: 1 year

Full technical specifications: here*

 

Assembly instructions: here*

 

Technical specifications:

 

• for flowering
• power: 40W
• voltage: 24V
• efficiency: 2.0µmol/s
• coverage area: 60 x 40cm (when suspended 15cm from the tops of the plants)
• dimming capability: yes
• water resistance: IP65
• robust and resistant to falls
• lifespan: + 30 000 hours
• dimensions L/W/H: 50 x 12 x 4cm
• 24V cable: 180cm
• 110V-220V cable: 60cm
• weight: 0.75kg

Agrolite Magnetic Ballast CL2 CMH 315W is a lighting kit designed to work with the latest-generation CMH / CDM lamps (ceramic metal-halide / ceramic discharge metal-halide lamps).

 

• the kit includes: magnetic ballast, ignitor and capacitor
• mains cable: 1.5m.
• lamp cable with C13 connector: 0.2m
• for CMH / CDM lamps
• power: 315W
• power consumption: 3.64A
• voltage: 220/230V
• box dimensions L/W/H: 298x128x115mm.
• weight: 6.2kg.

Secret Jardin Cosmorrow 100W Blooming is a complete diode / LED lighting set for the flowering stage of indoor-grown plants. The patented modular technology allows individual strips to be replaced (if you wish to add a different spectrum).

 

• for flowering
• power: 100W
• voltage: 24V
• efficiency: 2.4µmol/s
• coverage area: 60 x 60cm (when suspended 15cm above the plant tops)
• dimming option: yes
• water resistance: IP65
• robust and drop-resistant
• dimensions L/W/H: 50 x 40 x 6.5cm
• warranty: 1 year

Note: The set includes a power supply!

Full technical specifications: here*

 

Assembly instructions: here*

 

Technical specifications:

 

• for flowering
• power: 100W
• voltage: 24V
• efficiency: 2.4µmol/s
• LED strips: 5 x COP20BL
• coverage area: 60 x 60cm (when suspended 15cm above the plant tops)
• ​dimming capability: yes
• water resistance: IP65
• robust and resistant to drops
• lifetime: + 50 000 hours
• dimensions L/W/H: 50 x 40 x 6.5cm
• weight: 0.95kg

Osram Vialox NAV-T (SON-T) 1000W is a sodium/HPS bulb/lamp for the flowering stage.

• for flowering
• power: 1000W
• current: 10.6A
• luminous flux: 130 000 lm
• efficacy: 130 lm/W
• colour temperature: 2000 K\n
• lifetime: 8 000 h
• socket: E40\n

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Place at least 80 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

• Balanced full-spectrum light
• ​very high efficacy: 2.9µmol/J
• PPF: 2925 µmol/s
• Power consumption: 1025W (± 5%)
• Growing area with additional CO₂ supplementation: 1.5 x 1.5m.
• Growing area without additional CO₂ supplementation: 1.8 x 1.8m. (positioned higher above the plants)
• Lifespan: 60 000 hours
• Light source: Higher Spec Osram and Lumiled diodes
• Fully dimmable: OFF, 25%, 50%, 75%, 100% with 0-10V dimmer (included)
• Dimensions: 1181.2 x 1091 x 105.7mm.
• Weight: 18kg.
• Warranty: 5 years

Technical specifications:

 

• Balanced full-spectrum light
• ​very high efficacy: 2.9µmol/J
• PPF: 2925 µmol/s
• Power consumption: 1025W (± 5%)
• Growing area: 1.5 x 1.5m. (with additional CO₂ supplementation)
• Growing area: 1.8 x 1.8m. (without additional CO₂ supplementation, position higher above the plants)
• Lifespan: 60 000 hours
• Light source: Higher Spec Osram and LUMLED diodes
• Fully dimmable: OFF, 25%, 50%, 75%, 100% with 0-10V dimmer (included)
• Waterproof: IP65
• Input voltage: 200-240V, 50-60Hz
• Dimensions: 1181.2 x 1091 x 105.7mm.
• Weight: 18kg.
• Warranty: 5 years

 

Full instructions for use: here*

 

Full technical specifications: here*

LUMii AeroTube 150mm. is the latest air-cooled reflector. When used together with ducting and a fan, this innovative product allows air to flow through the reflector, helping to control the ambient temperature.

 

• Controls temperature
• Tempered glass
• Removable lamp holder for easy access and lamp cleaning
• External double-sided reflector for superior light output and distribution
• Includes a 4m IEC cable
• Recommended power: up to 600W
• ∅ 150mm.

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal halide (MH) lamps. It combines the cooling capability of a CoolTube with a large reflective surface. Use Ф125mm air ducts when connecting several reflectors in series.

reflector rail

Moves the lighting back and forth along a 220cm rail. This allows it to be placed closer to the plants because it does not stay in one place for long.
Increases the efficiency and lifespan of the lamp.



SAVES ELECTRICITY and increases efficiency
Movement speed - 3-3.30 minutes in one direction
Movement pause from 2 to 120 sec.
Adjustable movement speed
Movement can be limited using brackets.
Supports up to 10 kg
Drive motor power: 12W

Cooltube is a reflector with a cooling glass tube, designed to provide uniform lighting for plants without excess heat. It reduces the heat output of the lamp fitted in it by up to 40%. Heat is extracted through a suitable air duct fitted to the tube. 

• Length: 49 cm
• Tube diameter: Ø120 mm
• Suitable for 400W or 600W MH or HPS lamps
• An attached aluminium reflector provides 92% diffused light
• Includes an E40 lamp holder
• Materials: glass and aluminium

Introducing the smartest, most powerful and most efficient LED lighting on the market! DIMLUX XTREME SERIES LED 1000W+NIR. 

 

Dimlux Xtreme Series LED 1000W + NIR produces ultra-high PPFD levels of 3059μmol/s, evenly distributed over an area of 1.7 x 1.7m. It emits a full spectrum for cultivation, consistently producing crops with high yields and high quality. Dimlux Xtreme Series LED 1000W + NIR can be dimmed without losing efficiency, and the spectrum and power can be programmed according to the time of day and growth stage of the crop.

 

• power: 1065W at 230-240V
• total light output (PPF 350-800nm): 3059μmol/s
• total photon efficacy (PPF 350-800nm): 2.9μmol/J
• coverage area: 1.7 x 1.7m
• optics: patented lens with deep penetration and ultra-high transmittance
• supplementary light: patented multicolour light tube 65k
• built-in Doppler proximity sensor
• control: built-in (via the display) or with the Dimlux Maxi Controller
• smart ports X3: plant temperature sensor, light sensor, interlink

THE MOST POWERFUL AND INTELLIGENT LED LIGHTING FOR GROWING PLANTS ON THE MARKET! With these innovative LED fixtures, Dimlux sets the benchmark for horticultural lighting. With patented technology, advances in LED technology and an optimal thermal design, Dimlux Xtreme Series LED will be the preferred option, offering a significant return on investment for hobby and professional growers alike. Our adjustable spectrum for growing with PhytoVegSpec® +NIR Indoor combines complete control over the quality of light (spectral flexibility) and the quantity (intensity and DLI), ensuring uniform spreading and even distribution of light with extreme penetration into the crop.

1. +NIR (NEAR INFRA-RED) (NEAR INFRARED 700-750NM = FAR RED). This lighting fixture has an amount of far-red light that is used together with red light. In addition, the far-red light provides a more complete spectrum, increased photosynthesis, increased photon absorption and higher yield due to adapted morphology. Due to the additional far-red component, plants will become slightly taller than with the version without +NIR.
2. COLOUR IPS DISPLAY AND USER INTERFACE. The integration of a colour IPS screen and PhytoVegspec® makes the Xtreme series unique and special. Its special feature is that the spectra and the B:R (blue:red) ratio, or the amount of blue to red light, are displayed very accurately on the screen. Using this information, lighting recipes can be exchanged between growers and companies using values that are quantitatively measurable and therefore universally exchangeable. The values that can be controlled are the percentages of BLUE, GREEN and RED light, the B:R ratio, PPF, PPFD, DLI, power, the percentages of emitted light, plant temperature and air temperature.
3. BUILT-IN OR EXTERNAL CONTROL. The lighting fixture can operate entirely independently and even serve as the main unit in a group with other lighting fixtures. They can also be controlled by external devices such as the Dimlux Maxi Controller or other controllers. Since the lighting fixture can be updated via Wi-Fi, it is possible to work according to the latest trends in lighting strategy and supplement the spectrum by adding additional lighting fixtures.
4. DRIVERLESS DESIGN (ballast). The drivers that power the LEDs are integrated into the frame of the lighting fixture. Since high-voltage drivers are used, efficiency is particularly high and heat losses are therefore lower. This lower heat loss makes it possible to integrate the drivers into the frame.
5. TILTED LENSES WITH DEEP PENETRATION AND ULTRA-HIGH TRANSMITTANCE. The tilted LED bars are designed to provide the ideal balance between light penetration and its even spread. At the recommended height above the crop, uniformity higher than 95% can be achieved when multiple lighting fixtures are used. Because the light from the lenses is focused, less scattered light is lost on walls and walkways. The patented ultra-high-transmittance lens is internally shaped in such a way that the light rays that would normally be reflected back towards the LED (converted back into heat) now end up right next to the LED and are reflected.
6. ADDITIONAL LIGHT TUBE WITH FULL-COLOUR LEDs. Our lighting fixtures have unique additional lighting that is directed through lenses built into the light tube. The auxiliary lights consist of full-colour LEDs and serve as additional lighting, an alarm indicator, a plant-temperature indicator or night lighting, depending on the situation.
7. SMART PORTS 3X. The Xtreme series has 3 available Smart ports. These are universal communication ports with various connection options for a wide range of sensors, such as a Plant Temperature Sensor, an Air Temperature Sensor, CO₂ and humidity, as well as climate-control devices. Communication can be both analogue and digital through the Smart Protocol. It is possible to control up to 160 lighting fixtures via analogue communication and >1000 fixtures via the Smart Protocol.
8. DOPPLER RADAR PROXIMITY SENSOR. The built-in Doppler radar sensor can detect movement up to 3 metres away. This sensor is used, for example, to activate the screen and for automatic activation of (green) additional lighting at night. The intensity and colour of the additional lighting can be adjusted so that the room can be entered at night without disturbing the plants' rhythm. Because the night lighting switches on only when movement is detected, it will not unnecessarily illuminate areas where it is not needed. The night lighting can be set to different intensities and colours, such as blue, which appears to have less effect on the sleep rhythm than green light, but to which human vision is less sensitive. The sensor will also be used to automatically switch off UV rays when the additional fixtures are used, preventing eye and skin damage.

Brochure and instructions for use in English: here*, here* and here*

 

Full technical specifications:

 

• model: Xtreme Series 1000W (+ NIR)
• full spectrum: adjustable PhytoVegspec® +NIR Indoor
• total light output (PPF 350-800nm): 3059μmol/s
• total photon efficacy (PPF 350-800nm): 2.9μmol/J
• power: 1065W at 230-240V
• voltage: 120-277V AC, 50/60Hz
• beam angle: 90° × 120°
• mounting height above plants: 40-85cm
• optics: patented deep-penetration lens with ultra-high transmissivity
• supplementary light: patented 65k multicolour light tube
• proximity sensor: Doppler radar
• cooling: passive
• max. ambient temperature: 40°C
• control: built-in (via the display) or with the Dimlux Maxi Controller
• smart ports X3: plant temperature sensor, light sensor, interlink
• spectrum display with graphical user interface (control menu): 1.54" 65k-colour IPS
• THD: < 10%
• lifetime: > 50 000 hours
• water and dust resistance: IP65
• certification: CE, UL 8800, UL 1598 Wet Location, DLC
• warranty: 5 years
• dimensions: 120 x 110 x 6cm
• weight: 24kg

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal-halide (MH) lamps.

High-quality Miro9 material with 97% reflectivity.

Special plastic flanges to prevent accidents and reduce heat.

Mounting kit included.

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal-halide (MH) lamps

 

Cool Tube is an indispensable piece of equipment for hydroponic and indoor growing. Our new Cool Tubes are designed to offer greater efficiency and safety to customers. The product is more efficient because Prima Klima uses special Miro9 material for its reflectors, delivering 97% reflectivity. The highly durable plastic flanges provide greater efficiency in removing heat from plants and more safety for users, as plastic does not conduct electricity. Our Cool Tubes are manufactured in Europe in accordance with all safety standards.

• High-quality Miro9 material with 97% reflectivity
• Special plastic flanges to prevent accidents and reduce heat
• Mounting kit included

LUMii BLACK Blade 100W LED is a high-performance LED lighting system designed to provide optimal light for plants during the growth stage.

LUMii BLACK Blade 100W LED is a compact, economical and productive LED alternative to T5, CFL or 250 W metal-halide lamps. Providing full-spectrum white light with enhanced blue output, it is ideal for vegetative growth and propagation. (Not recommended for flowering and fruiting stages.) The fixture is large enough to illuminate an entire propagation tray and small enough to use in a LightHouse cloning tent. It is powered directly from the mains via the supplied 2 m power cable and includes hanging straps for easy installation. Technical specifications: Input power 100 W. Input voltage 100 - 277 V AC / 50 - 60 kHz. Input current 1 A at 100 V, 0,36 A at 277 V. Efficacy 2,6 µmol/J @ 220 V AC. PPF 260 µmol/s. Beam angle 120°. Protection rating IP65. Dimensions: 215 mm x 425 mm x 92 mm (8,5" x 16,7" x 3,6"). Weight 2 kg (4,4 lb). Operating ambient temperature and humidity: 0° C - 40° C (32° F - 104° F). Maximum relative humidity 95%. Storage temperature and humidity: -40° C - 70° C (-40° F - 158° F). Maximum relative humidity 85%.

Defender reflector is an efficient industrial model. The reflector surface has a heat-resistant "titanium white" powder coating that produces a highly diffuse, even light spread. It maintains a reflectivity of 92%. The base metal is H18 aluminium alloy (3% magnesium), which is strong yet flexible, giving the reflector consistently perfect parabolic curves even under the toughest handling – perfect for growers with an ever-changing growing environment.

 

• Coverage area: 2.36m²
• Overall dimensions at the widest setting 70cm x 55cm
• Perfect for one 400W / 600W high-pressure sodium / metal-halide lamp

 

Feature:

 

• Double-parabolic reflector
• Twice the power and efficiency of most other reflectors
• Corrosion-resistant
• 92% light reflectivity
• Robust reflector with a perfect shape

• Balanced full-spectrum light
• ​very high efficacy: up to 2.9µmol/J
• PPF: 2925 µmol/s
• Power consumption: 1025W (± 5%)
• Coverage area: 2.0 x 1.5m
• Lifespan: + 60 000 hours
• Light distribution: 120°
• Light source: Higher Spec Osram and Lumiled LEDs
• Fully adjustable: OFF, 25%, 50%, 75%, 100%  with 0-10V dimmer (included)
• Waterproof: IP65
• Input voltage: 200-240V, 50-60Hz
• Dimensions: 1700 x 1099.6 x 48.2 mm
• Weight: 17.5 kg
• Warranty: 5 years

• The professional choice in lighting fixtures.
• The set includes a Gavita Pro 1000W 400V DE EL lamp with an output of 2100 μmol s-1.
• Illuminates more than 2 sq.m with 2000 μmol s-1.
• The most efficient, highest-output model on the market (Energy efficiency class: A++)
• Compatible with the Gavita Master controller.
• Easy installation — plug in and use.

Gavita Pro 1000e DE

The best lighting is now even better

The new Gavita Pro e-series are improved models of Gavita's existing classic lighting fixture series, now compatible with and adapted for complete lighting control via a Gavita Master controller. You can now control the light with just a few simple button presses.

Gavita Pro HPS fixtures are the professional standard for efficient lighting. Operating at standard 240V, they power high-voltage (400V) electronic horticultural lamps, which outperform ordinary ones in spectrum, light output and lamp efficiency during extended use.

• Fully encapsulated wiring with a GORE-TEX ventilation outlet, no moving parts, completely silent and with almost imperceptible heat output.
• Compatible with high-frequency electronic (400V) horticultural lamps, which have 10-25% greater light output.
• Highly efficient — retain more than 95% of their light-reflecting properties, so you only need to replace the bulb once a year.
• Replaceable Gavita HR96 reflector with 96% reflectivity for maximum efficiency.
• Controlled output: With one knob, increase or decrease the amount of supplied light according to the conditions or development stages of your plants.
• A "soft" light-dimming system allows gradual reduction of emitted light, eliminating stress on the lamp when its supplied current changes.
• Equipped with high-frequency (>100kHz) Gavita electronics.
• No problems caused by electromagnetic interference.

Specifications here!

LUMii AeroTube 200mm. is the latest air-cooled reflector. When used with ducting and a fan, this innovative product allows air to flow through the reflector, helping control the ambient temperature.

 

• Controls temperature
• Tempered glass
• Removable lamp holder for easy access and lamp cleaning
• External double-sided reflector for superior light output and distribution
• Includes a 4m IEC cable
• Recommended wattage: up to 1000W
• ∅ 200mm.