Lighting

Secret Jardin TLED 26W L54cm Blooming is a single LED bar for the growth and flowering stages of indoor-grown plants. Ideal for additional vertical lighting for the plants in your tent. 

• for growth and flowering
• power: 26W
• efficiency: 2.0µmol/s
• coverage area: 60 x 40cm (when suspended 15cm above the top of the plants)
• protection rating: IP54
• lifespan: + 50 000 hours
• warranty: 1 year
• power cable: yes

Technical specifications:

• for growth and flowering
• power: 26W
• efficiency: 2.0µmol/s
• coverage area: 60 x 40cm (when suspended 15cm above the top of the plants)
• voltage: 100-220V
• frequency: 50/60 Hz
• dimensions: 54 x 4 x 3cm
• weight: 0.36kg
• protection: IP54
• lifespan: + 50 000 hours

• Light spectrum: full spectrum +
• High efficacy: up to 2.5µmol/J
• PPF: 508µmol/s
• power (100%): 205W
• Coverage area: up to 0.8 x 0.8m
• Waterproof: IP65
• Lifespan: + 60 000 hours
• Light source: high-quality white, red and far-red diodes
• Five operating modes: OFF, 25%, 50%, 75%, 100% with 0-10V dimmer (included)
• Dimensions: 524.5 x 524.5 x 71.6mm
• Weight: 4kg
• Warranty: 3 years

Viparspectra XS2000 220W is budget-friendly, high-efficiency diode / LED lighting for growing plants indoors.

• industry-leading Samsung LM301B diodes
• ballast Mean Well Driver
• full spectrum, similar to sunlight
• including infrared LEDs (IR)
• built-in dimmer for power adjustment 5% - 100%
• conformal silicone sealant coating on waterproof LEDs
• passive cooling with a larger-surface heat sink
• completely silent

• power: 220W ± 3%
• coverage area (in vegetative growth): 121.9 x 106.7cm (at a height of 0.61m)
• coverage area (in the flowering phase): 106.7 x 91.4cm (at a height of 0.51m)
• dimensions: 50.0 x 28.0 x 6.6cm
• weight: 3.49kg

Technical specifications:

• dimensions: 50.0 x 28.0 x 6.6cm
• weight: 3.49kg
• LED chips: Samsung LM301B diodes, incl.:

1. 3000K warm white 
2. 6500K white 
3. 660nm deep red 
4. 730nm infrared

• coverage area (in vegetative growth): 121.9 x 106.7cm (at a height of 0.61m)
• coverage area (in the flowering phase): 106.7 x 91.4cm (at a height of 0.51m)
• power: 220W ± 3%
• voltage: 100-240 V, 50-60 Hz
• passive cooling
• noise level: 0dB
• lifespan: 100,000h
• warranty: 2 years
• the set includes: ViparSpectra XS2000, instructions for use, 3m power cable, hanging kit

Energy-efficient full-spectrum LED grow light with dimmable brightness and excellent cooling, ideal for maximum plant growth and yield.

TECHNICAL SPECIFICATIONS:

• Power: 100W actual consumption
• Diodes: New design for even PAR coverage
• Spectrum: 660nm red light, 3000K and 5000K white light
• Features: Dimmable brightness Coverage:
• Vegetative stage: 60x60 cm at a height of 40 cm
• Flowering: 45x45 cm at a height of 25 cm
• Cooling: Silent, fanless, with aluminium heat sinks

NEW DIODE DESIGN The modern diode configuration delivers a more scientific layout, ensuring more even PAR coverage and deeper canopy penetration for maximum plant yields.

LOW ENERGY COSTS P600 LED grow light uses the latest SMD LED technology, delivering high PAR output, high energy efficiency and stronger light output. Achieve higher yields while reducing energy costs!

DIMMING FUNCTION A controller is included to manage light brightness, providing flexibility to achieve perfect performance at every growth stage.

OPTIMAL FULL LIGHT SPECTRUM The lamp includes 660nm red light and 3000K and 5000K white light, providing plants with everything needed from vegetative growth to flowering, similar to natural sunlight.

SUPERIOR HEAT DISSIPATION Designed for durability. Silent, fanless design. Built-in large areas of solid aluminium heat sinks are essential for heat dissipation and ensure a long lamp lifetime.

COVERAGE Actual power consumption is 100W. Ideal for vegetative coverage of 60x60 cm at a height of 40 cm and flowering coverage of 45x45 cm at a height of 25 cm. Remember to adjust height and brightness according to your plants' needs for optimal growth.

🔹 Solux i-Clone 2x10W LED Tube is a compact and efficient LED light designed to optimally illuminate rooting cuttings and support mother plants. With its full-spectrum lighting and the ability to connect up to 10 tubes in series, this product offers flexibility and efficiency for any indoor garden.

🔹 Detailed specifications:

• Manufacturer: Solux
• Model: i-Clone 2x10W LED Tube
• Lighting type: LED tube with two 10W LEDs
• Color temperature: 6500K (suitable for vegetative growth and flowering)
• Light efficiency: 2.4 μmol/s per watt
• Product lifespan: 55,000 hours
• Dimensions: 61.5 x 3.1 x 3.8 cm
• Weight: 180 g
• IP protection: IP65 (resistant to dust and moisture)
• Connection: Ability to connect up to 10 tubes in series via IP65 input/output
• Package contents: 2 LED tubes, power cable, mounting brackets

🔹 Recommendations and instructions for use:

1. Choose a suitable location for installing the tubes, ensuring good light distribution.
2. Use the supplied mounting brackets to secure the tubes to a wall or ceiling.
3. Connect the tubes sequentially using the IP65 input/output connectors to connect up to 10 tubes in series.
4. Connect the power cable to the first tube and plug it into the electrical network.
5. Adjust the lighting according to the plants' needs, ensuring a suitable photoperiod and light intensity.

✅ Benefits of use:

• Improved rooting: Stimulates fast and healthy rooting of cuttings.
• Support for mother plants: Provides optimal conditions for keeping mother plants healthy.
• Flexibility: Ability to connect up to 10 tubes in series, allowing easy expansion of the lighting system.
• Energy efficiency: Low energy consumption and long product lifespan.
• Durability: IP65 protection against dust and moisture, suitable for various indoor conditions.

• Light spectrum: full spectrum +
• High efficiency: up to 2.7µmol/J
• PPF: 816µmol/s
• Power: 310W (±2%)
• Coverage area: up to 1.0 x 1.0m
• Waterproof: IP65
• Lifespan: + 60 000 hours
• Light source: high-quality white, red and far-red diodes
• Five different operating modes: OFF, 25%, 50%, 75%, 100% with a 0-10V dimmer (included)
• Dimensions: 559.5x559.5x71.6mm
• Weight: 5.2kg
• Warranty: 3 years

Lumatek LED Zeus 600W PRO 2.9 is a complete LED lighting system which, with a PPF of 1770µmol/s and efficacy of 2.9µmol/J is perhaps one of the best products currently available on the market. Its balanced full spectrum light makes it ideal and sufficient for use during all stages of plant development — from germination, through seedling, cloning or vegetative growth, right to the end of the flowering period for indoor-grown crops.

Why Lumatek LED:

1. Save up to 40% on electricity because less heat is generated in the space, reducing the need for cooling.
2. Gardeners growing with LED lighting notice improved crop quality as well as a higher final yield.
3. Provides + 60 000 hours of operation and a 5-year warranty.

• Balanced full-spectrum light
• High efficacy: 2.9µmol/J
• PPF: 1770µmol/s
• Power consumption: 615W (±5%)
• Coverage area: 1.4 x 1.4 m.
• Service life: + 60 000 hours
• Light source: Higher Spec Osram and Lumiled diodes
• Fully dimmable: OFF, 25%, 50%, 75%, 100% 
• Dimensions: 1091x1182.4x51.9mm.
• Weight: 13.5kg.

As technology advances, high-quality LED horticultural lighting is now a reliable option for growers, offering a significant return on investment. Lumatek full-spectrum LED products balance light quality (spectra) with quantity (intensity and duration) sufficiently to provide a single-source lighting solution for the entire growing cycle — from vegetative growth to flowering.
The linear arrangement of LEDs creates even light distribution at a short distance from the crop, enabling single-source lighting for multilayer growing systems, individual benches in low rooms and grow tents.
Zeus is built using high-quality Lumatek drivers and top-tier Osram and LUMLED LEDs, generating full-spectrum light that is ideal for vegetative and flowering cycles.
For the different plant stages — germination, seedling or vegetative growth — the power of Lumatek LED Zeus 600W PRO 2.9 can be adjusted without losing efficiency. The highly efficient, low-powered LED configuration with six LED bars lowers LED temperature, increasing output and improving light maintenance.

Technical specifications:

• Balanced full-spectrum light
• High efficacy: 2.9µmol/J
• PPF: 1770µmol/s
• Power consumption: 615W (±5%)
• Coverage area during vegetative growth: 1.5 x 1.5 m
• Coverage area during flowering: 1.4 x 1.4 m.
• Light distribution: 120°
• Service life: + 60 000 hours
• Light source: Higher Spec Osram and LUMLED LEDs
• Fully dimmable with 0-10V light dimmer (included): OFF, 25%, 50%, 75%, 100% 
• Waterproof: IP65
• Input voltage: 200-240V, 50-60Hz
• Dimensions: 1091x1182.4x51.9mm.
• Weight: 13.5kg.
   

Full instructions for use: here*

Full technical specifications: here*

  The new higher-specification LUMATEK ZEUS 600W PRO 3.1 LED is an aluminium multi-bar light fixture that produces high PPF levels of 1990 µmol/s, achieving a photon efficacy of 3.1 µmol/J. As diode technology continues to advance, LUMATEK has increased the total photosynthetic photon flux, raising the total usable photons for the growing area by 10%. This means the fixture now covers 1.5 x 1.5 m for vegetative and flowering stages. The LUMATEK ZEUS 600W PRO 3.1 design provides even photon distribution and can be positioned close to plants. Ultra-high efficacy: 3.1 µmol/J PPF: 1990 µmol/s Coverage area: 1.5 x 1.5 m. Balanced full-spectrum

• light Diodes: Samsung
• LM301H EVO
• & Osram 4.24 Light distribution:
• 120° Five power settings:
• OFF, 25%, 50%, 75%, 100% External control:
• with LUMATEK Digital
• Panel PLUS 2.0 (HID+LED) warranty:
• 5 years Weight: 13.5 kg Dimensions: 1182 x
• 1091 x 52
• mm   For
• different cultivars, seedlings and vegetative growth

periods, the LUMATEK ZEUS 600W PRO 3.1 can be dimmed without loss of efficiency. The highly efficient low-power diode

configuration with 6 LED bars lowers diode temperatures, increases output and improves light maintenance. As standard, this fixture can also be externally controlled with the

LUMATEK Plus 2.0 control panel, including light-timing setup, automated dimming (in 1% increments), temperature safety control, and sunrise/sunset mode for up to 100 LUMATEK ZEUS 600W PRO 3.1 fixtures per controller. Lumatek Plus 2.0 Control Panel Compatibility with universal control systems. Lumatek LED fixtures

can be fully controlled

with the Lumatek Plus 2.0 Digital Panel or any other control system using a 0-10V output signal. Even if your universal controller has an RJ-port interface, you can control our LEDs using an RJ-to-0-10V signal-conversion adapter. Technical specifications: Input voltage: 220-240 V AC, 50-60 Hz Power consumption: 640 W (± 5%) @ 230 V

AC Ultra-high

• efficacy: 3.1 µmol/J PPF: 1990 µmol/s Coverage
• area: 1.5 x 1.5 m. Balanced full-spectrum light Diodes: SAMSUNG
• LM301H EVO | OSRAM
• 4.24 Light
• distribution: 120° Fully dimmable with
• 0-10V light dimmer (included):
• OFF, 25%, 50%, 75%, 100% External
• control: with LUMATEK
• Digital Panel PLUS 2.0 (HID+LED) Daisy-chain capability: yes Thermal management:
• passive water resistance: IP65 Certifications: CE, EMC, LVD
• Service life: L90 > 60 000
• hours warranty:
• 5 years
• Weight: 13.5 kg Dimensions:
• 1182 x 1091 x 52 mm
• The set includes:
• 6 x
• LUMATEK 100W PRO 3.1 LED bars

with magnetic

• mounting 1 x LUMATEK 600W PRO 3.1 driver with
• connecting cables 1 x LED frame with connecting
• cables 1 x 0-10 V light
• dimmer 2 x metal hangers
• 1 x manual
• Full instructions

for use: here* Full

technical specifications: here*

Lux-Rooting V.2 power cable for LED seedling lights:

• Lux-Rooting TL LED V.2 12W 60cm 6500K 2.3μmol/J – LED growth light
• Lux-Rooting TL LED V.2 24W 120cm 6500K 2.3μmol/J – LED growth light

Features:

• length: 1.5 m
• plug: yes
• protection: IP65

LUMii Black 600W kit, Maxibright Warpdrive and Stucco for indoor growing. The kit includes:

• lamp / bulb: dual-spectrum LUMii BLACK 600W 1 pc.
• ballast: electronic Maxibright Warpdrive 1 pc.
• reflector: open embossed Stucco 1 pc.

Attention: the kit does not include a cable from the ballast to the reflector!

Lumatek LED Zeus 600W is a complete LED lighting system which, with its PPF of 1380µmol/s and efficiency of 2.3µmol/J, is perhaps one of the best products currently available on the market. The light it produces, with a balanced full spectrum, makes it ideal and sufficient for use throughout all stages of plant development—from germination, through seedlings, cloning or vegetative growth, right to the end of the flowering period for indoor-grown crops.

Why Lumatek LED:

1. You save up to 40% on electricity, because less heat is generated in the room and consequently less cooling is required.
2. Gardeners growing with LED lighting notice improved crop quality as well as a higher final yield.
3. Guaranteed 60 000 h of operation and a 5-year warranty.

• Balanced full-spectrum light
• ​High efficiency: 2.3µmol/J
• PPF: 1380µmol/s
• Power consumption: 600W
• Coverage area: 1.5 x 1.5m.
• Lifespan: 60 000 hours
• Light source: Osram and Lumileds Philips diodes
• Fully adjustable: OFF, 25%, 50%, 75%, 100%
• Dimensions: 1091x1182.4x51.9mm.
• Weight: 13.5kg.

With the advancement of technology, high-quality LED horticultural lighting is now a reliable option for growers, offering a significant return on investment. Lumatek full-spectrum LED products balance the quality (spectra) and quantity (intensity and duration) of light sufficiently to provide single-source lighting for the entire growing cycle—from vegetative growth to the flowering period.
The linear arrangement of the LEDs creates an even distribution of light close to the crop, allowing single-source lighting for multi-layer growing systems, single benches in low rooms and grow tents.
Zeus is built using high-quality Lumatek drivers and top-of-the-range Osram and Lumileds Philips LEDs, generating full-spectrum light ideal for vegetative and flowering cycles.
For different plant stages—germination, seedlings or vegetative growth—the output of the Lumatek LED Zeus 600W can be adjusted without any loss of efficiency. The highly efficient, low-powered LED configuration with six LED bars reduces LED temperature, increasing output and improving light maintenance.

Technical specifications:

• Balanced full-spectrum light
• ​High efficiency: 2.3µmol/J
• PPF: 1380µmol/s
• Power consumption: 600W
• Coverage area: 1.5 x 1.5m.
• Light distribution: 120°
• Lifespan: 60 000 hours
• Light source: Osram and Lumileds Philips diodes
• Fully adjustable with 0-10V light dimmer (included): OFF, 25%, 50%, 75%, 100% 
• Waterproof: IP65
• Input voltage: 200-240V, 50-60Hz
• Dimensions: 1091x1182.4x51.9mm.
• Weight: 13.5kg.

Full instructions for use: here*

Full technical specifications: here*

• Socket: E40
• Luminous flux: 12 950 Lm
• Efficiency: 43 Lm/W
• Lifetime: 10 000 hours
• Colour temperature: 2700 K
• Suitable for supplementary lighting, side lighting, mother plants and clones
• Minimal heat emission

Compact fluorescent lamp (CFL) for young plants, with an integrated electronic ballast (connects directly to the mains using an E40 socket). It does not develop a high temperature and can be positioned very close to plants.

• Do not touch the glass part of the lamp with your hands!
• Do not overtighten in the socket!
• Ensure suitable ventilation!
• Do not use the lamp if it is wet!
• Do not use in dimmable light fixtures!
• Do not use in enclosed light fixtures!

White Lightite 2 m x 1 m is a three-layer white reflective film folded in the middle. It improves overall plant growth, increasing yields by reflecting the emitted heat, which also results in reduced energy costs. The price is for 1 linear metre.

• 100% lightproof
• thickness: 120μm
• width: 2 m
• length: 1 m

FOOD SAFE! PLANT SAFE!

Mari 600W is a high-quality and durable product – one of the best and best-selling in its class on the market. The lighting kit is designed to work with HPS (sodium) and MH (metal-halide) lamps.

• the kit includes: magnetic ballast, igniter and capacitor
• for HPS and MH lamps
• power: 600W
• power consumption: 6.2A
• voltage: 230V, 50Hz
• dimensions L/W/H: 295x110x115mm
• weight: 6.4kg

Protect your indoor growing space from water damage. It can secure any floor, and you need not worry because this film is a highly durable product that cannot tear. 

• Width: 4 m
• Thickness: 250μm

HortiLight SHP 600W dual is a dual-spectrum sodium / HPS bulb / lamp, suitable for both growth / vegetative growth and the flowering phase.

• for growth and flowering
• power: 600W
• luminous flux: 80 000 lm
• efficacy: 133 lm/W
• colour temperature: 2100K
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Garden Highpro PEARLPRO XL is an adjustable* open reflector made of high-quality pearl aluminium. PEARLPRO XL creates no “hot spots” and distributes light more evenly than other reflectors in this price range. Its greater light spread and intensity provide a larger coverage area. The reflector includes 3 different spreaders for diffusing light, allowing optimisation for the room where it is installed.

• made of high-quality "pearl" aluminium
• safe junction box for concealed wiring
• dimensions at widest setting L/W: 55 x 63cm
• lamp socket: E40 (included)
• suitable for: 250W, 400W, 600W MH / HPS bulbs

CoolTube reflector, Stucco type.

​250W indoor growing lighting kit. The kit includes:

• bulb / lamp: dual-spectrum Sylvania GroLux SHP-TS 250W 1 pc.
• ballast: magnetic Electrostart 250W 1 pc.
• reflector: open textured Stucco 1 pc.

Warning: the set does not include cables or a plug!

Osram Plantastar 600W is a dual-spectrum sodium / HPS bulb / lamp suitable for both growth /vegetative growth and the flowering stage.

• for growth and flowering
• power: 600W
• current: 6.06A
• luminous flux: 90 000 lm
• efficacy: 150 lm/W
• PPF: 1100 µmol/s
• efficacy: 1.8 µmol/s
• colour temperature: 2000 K\n
• life: 20 000 h\n
• socket: E40\n

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 60 cm away from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

Secret Jardin TLED 26W L54cm Full Spectrom is a single LED bar for the growth and flowering stages of indoor-grown plants. Ideal for additional vertical lighting for plants in your grow tent.

• for growth and flowering
• Power: 42W
• efficiency: 2.0µmol/s
• coverage area: 120 x 60cm (when suspended 15cm above plant tops)
• protection rating: IP54
• lifespan: + 50 000 hours
• warranty: 1 year
• Power cable: yes

Technical specifications:

• for growth and flowering
• Power: 42W
• efficiency: 2.0µmol/s
• Coverage area: 120 x 60cm (when suspended 15cm above the tops of the plants)
• voltage: 100-220V
• frequency: 50/60 Hz
• Dimensions: 95 x 4 x 3cm
• Weight: 0.58kg
• protection rating: IP54
• lifespan: + 50 000 hours

Garden Highpro PEARLPRO is an open reflector with up to 10% greater light distribution than a standard Stucco reflector.

• Made from high-quality "pearl" aluminium
• Safe junction box for concealed wiring
• Dimensions L/W/H: 47 x 47 x 11 cm
• lamp socket: E40 (included)
• Suitable for: 250W, 400W, 600W MH / HPS bulbs

The Philips MASTER GreenPower CG T 600W is a sodium / HPS bulb / lamp with predominant emission in the yellow spectrum of light, making it suitable for use only during the flowering period of indoor-grown plants.

• for flowering 
• power: 618W
• current: 5.45A
• luminous flux: 88 000lm
• efficacy: 147 lm/W
• colour temperature: 2000K
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 60 cm away from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

Lumatek HPS Lamp 250W 240V is a pulse-start* high-pressure sodium bulb / lamp, suitable for both growth / vegetative growth and the flowering phase. It is made from durable PCA ceramic, which allows the lamp to operate at higher internal temperatures, increasing output and efficiency. Pulse-start technology enables faster start-up and restart, longer lamp life and improved lumen maintenance.

• for growth and flowering
• power: 250W
• current: 3.0A
• luminous flux: 33 000 lm
• efficacy: 132 lm/W
• PPF: 400 μmol/s
• colour temperature: 2000 K
• lifespan: 28 000 h
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 60 cm away from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

Secret Jardin Cosmorrow LED 20W L50cm Blooming is a single LED bar for the flowering stage of indoor-grown plants. The power supply is not included and is sold separately! You can purchase it here!

• for flowering
• power: 20W
• voltage: 24V
• efficacy: 1.8µmol/s
• light ratio: 33% 2100°K : 33% 6500°K : 34% 660nm
• coverage area: 60 x 40cm (when suspended 15cm above the top of the plants)
• water resistance: IP65
• lifespan: 30 000 hours
• warranty: 1 year

Technical specifications:

• for flowering
• power: 20W
• voltage: 24V
• efficacy: 1.8µmol/s
• light ratio: 33% 2100°K : 33% 6500°K : 34% 660nm
• coverage area: 60 x 40cm (when suspended 15cm above the top of the plants)
• water resistance: IP65
• dimensions: 47 x 3.2 x 1.5cm
• weight: 0.16 kg

Osram Vialox NAV-T (SON-T) 600W is a sodium / HPS bulb / lamp for the flowering stage.

• for flowering
• power: 600W
• current: 6.06A
• luminous flux: 90 000 lm
• efficacy: 150 lm/W
• colour temperature: 2000 K
• life: 20 000 h\n
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 60 cm away from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

"IEC Power (FEMALE) connector" is a high-quality electrical connector designed for secure connection and power supply to various electrical devices and equipment. This female connector is specially designed to provide a reliable and safe connection between devices and the electrical mains.

"IEC Power (FEMALE) connector" is made from high-quality materials that provide product durability and a long service life. It is designed for easy, secure connection to matching male connectors and offers very good electrical conductivity. This female connector is ideal for a range of electrical installations and applications, commonly used in audio and video equipment, computer systems, electronics and other devices. The product is compatible with standard IEC connections and can be easily integrated into various electrical circuits.