Programmers and Ready-Made Irrigation Systems

PLANTiT Water Timer is designed for connecting to a tap, but can also be used for gravity-fed irrigation from a barrel or tank. Programming the timer takes just 2 easy steps – turn the Run Time dial to the desired watering duration and the Frequency dial to the desired interval between watering cycles. Then connect it to the irrigation outlet pipe and the timer takes care of the rest.

• Designed for connection to a tap
• The protective cover makes it fully waterproof
• Powered by two 1.5V AAA batteries (not included), which can last a whole season without needing replacement
• Automatic shut-off valve for when the battery is depleted, plus a program delay button for plant maintenance when you do not want to water
• Supplied with a set of fittings and a built-in filter

Technical specifications:

• Operating pressure range: 0-150 PSI (0-10 BAR)
• Connection: ¾ male / female connector / hose connector
• Frequency: choose watering every 1, 2, 3, 4, 6, 8, 12, 24, 48 or 72 hours, or 1 week
• Run time (watering): 1, 3, 5, 10, 15, 20, 30, 60, 90 or 120 minutes

HydroDrip 15 is an intelligent automatic drip irrigation system designed for up to 15 pots or plants. Thanks to the built-in pump and timer, the system can draw water directly from a container, bucket or reservoir without needing to be connected to a water supply. This makes it an ideal solution for balconies, terraces, greenhouses, offices and rooms without access to running water.

HydroDrip 15 is a compact and fully automatic drip irrigation system that provides plants with the optimal amount of water on a preset schedule. Thanks to the built-in water pump, the device pumps water directly from an external container, allowing it to be used practically anywhere – both indoors and outdoors.

The timer makes it easy to set the watering duration, as well as the watering frequency. Depending on your plants’ needs, you can choose intervals from 1 hour to 7 days, and set the watering duration between 30 seconds and 15 minutes. This ensures that each plant receives the necessary amount of water, without the risk of drying out or overwatering.

The kit runs on an integrated rechargeable lithium-ion battery, which charges via Micro-USB. The IPX5 protection rating allows use both indoors and outdoors; for outdoor installation, the manufacturer recommends placing the device above ground level for better protection.

Technical specifications

✔️ Model: HydroDrip 15

✔️ Type: Automatic drip irrigation system

✔️ Maximum capacity: up to 15 plants (up to 10 recommended for optimal operation)

✔️ Power supply: Built-in Li-Ion battery

✔️ Voltage: 3.7 V / 2000 mAh

✔️ Charging: Micro-USB

✔️ Protection rating: IPX5

✔️ Flow rate: 100 – 250 ml/min

✔️ Maximum suction height: 2 m

✔️ Maximum delivery height: 2 m

Watering settings

✔️ Intervals:

• 1 hour
• 3 hours
• 6 hours
• 12 hours
• 24 hours
• 48 hours
• 3 to 7 days

✔️ Duration:

• 30 seconds
• 1, 3, 5, 6, 7, 8, 10, 12 and 15 minutes.

📦 The kit includes

✔️ 1 × Timer with built-in pump.

✔️ 1 × Filter.

✔️ 10 × Drippers.

✔️ 10 × Dripper stakes.

✔️ 10 × T-connectors.

✔️ 2 × End caps.

✔️ 10 m hose.

✔️ Metal mounting bracket.

✔️ Bottle adapter.

✔️ USB charging cable.

📋 Instructions for use

1. Place the inlet hose in water, a bucket or a reservoir.
2. Connect the drippers to the main hose and place them in each pot.
3. Charge the battery using the included Micro-USB cable.
4. Set the desired watering frequency and duration.
5. Secure the timer to the container or wall using the metal bracket.
6. Check that the system is working before first use.

⚠️ Important: For optimal operation, use clean water and clean the filter regularly. If the system is used outdoors, install the timer above ground level to protect it from direct wetting and the accumulation of dirt.

💡 Tip from Urban Botaniks: HydroDrip 15 is an excellent choice for people who travel often or are away from home. Simply place the inlet hose in a water reservoir, set the watering schedule and the system will automatically care for the plants for days, without needing a water supply connection.

The automatic Wassertech system for 10 plants is a kit powered by 4 AA batteries (not included), with a pressure pump, timer and up to 10m of hose that can be cut as needed. Suitable for indoor and outdoor use, it provides regular watering while you are away.

Detailed features

• Power supply: 4 x AA batteries, no mains electricity required.
• Pump: submersible pump delivering water from the reservoir to the plants.
• Hose: approximately 10m of hose, which can be cut to the required length.
• Control: timer with programmable watering frequency and duration.
• Consumption / weight: approximately 0.5 kg

Recommendations for use

• Use a reservoir with sufficient capacity if you will be away for several days — the larger it is, the longer the system can maintain watering.
• Set the timer according to your plants’ needs — frequency + duration. For example, you can set a frequency of 0.1 days for more intensive watering or skip several days depending on the season.
• Check the batteries regularly, especially in high temperatures or during prolonged use, to prevent watering from stopping.
• If the hose is long or has many branches, make sure the pump is powerful enough and the reservoir is close enough to maintain pressure.

Benefits

This system provides automated, convenient watering for up to 10 plants without mains electricity, suitable for balconies, greenhouses or temporary absences. With a timer and adjustable cycles, it ensures even, regular watering, while the hose and pump allow flexible installation for the space and plants’ needs.

Water Master Solar Irrigation Kit is an intelligent, fully autonomous irrigation system that uses solar energy. It enables automatic plant watering without electricity, cables or complex installations – an ideal solution for gardens, terraces and balconies.

The system operates through a solar panel that powers a pump and distributes water via hoses and drip emitters. This provides even, precise irrigation while saving water and energy.

With adjustable watering duration and frequency, the kit adapts to the needs of every plant. This ensures optimal growth with minimal effort, even when you are away from home. 

Key features

✔️ Solar panel: 1.5 W for autonomous operation
✔️ Pump flow rate: approx. 45 l/hour
✔️ Adjustable irrigation: from 15 sec. to 30 min.
✔️ Frequency: from 1–2 times per day to once every 7 days
✔️ 15 m hose (1/4") for covering a larger area
✔️ 15 micro-drippers for precise watering
✔️ Low-water-level sensor (to protect the pump)
✔️ Non-return valve and filter for a clean flow
✔️ USB-C charging in cloudy weather
✔️ Easy installation without tools

Benefits

✔️ Fully autonomous system – operates without mains power
✔️ Saves water through drip and controlled irrigation
✔️ Energy-efficient – uses solar energy
✔️ Custom settings tailored to plant needs
✔️ Ideal when away – waters automatically
✔️ Easy installation and minimal maintenance

 Application

Water Master Solar Irrigation Kit is suitable for irrigating pots, gardens, vegetable beds and greenhouses. An excellent solution for outdoor spaces without access to electricity.

A perfect choice for home gardeners and plant enthusiasts, who want convenience, efficiency and an eco-friendly way to keep plants healthy with little effort.

How to use:

Place the hose in the reservoir or connect it to the water supply.

Set the irrigation duration (15 sec – 30 min) and frequency (1–2 times per day to once every 7 days).

The solar panel supplies power to the pump and starts irrigation automatically.

The additional USB-C input allows charging even in cloudy weather.

Make watering your garden as easy as child's play with the Water Master irrigation controller! Programming the timer takes just 2 easy steps - turn the Run Time dial to set the desired watering duration and the Frequency dial to set the desired interval between waterings. Then connect it to the garden hose with a standard quick connector and the timer will do the rest!

• uses an efficient solenoid valve
• up to 8 watering cycles per day
• programming the frequency and watering duration
• easy and quick to install on any tap

Technical specifications:

• Frequency (Frecuancia / Frequency): you can set irrigation every 1, 2, 3, 4, 6, 8, 12, 24, 48, 72 hours or 1 week
• Run time / watering (Tiempo activo / Runtime): 1, 3, 5, 10, 15, 20, 30, 60, 90, or 120 minutes
• Connections: ¾ male and ¾ female connector
• Batteries: 2 x AAA (not included)

Rain My Farm Balcony is a ready-made kit for automatic drip irrigation of up to 30 pots, including an AMICO+ timer, all necessary tubing, fittings and drippers for quick installation of an irrigation system. It is a practical solution for balconies, terraces, yards, greenhouses and conservatories, providing even, economical watering even when you are away from home.

Drip irrigation is one of the most effective ways to maintain optimum plant moisture while significantly reducing water consumption. The My Farm Balcony kit is designed as a ready-made "Do It Yourself" solution, allowing easy installation of an automatic irrigation system without the need for specialised tools or technical knowledge.

The kit allows irrigation of up to 30 pots through individual drippers that deliver water directly to the root system. In this way, plants receive the required amount of water without losses from evaporation or runoff. This leads to healthier growth, lower risk of overwatering and significantly lower water consumption.

The kit includes an AMICO+ timer, which enables fully automatic watering control. The large LCD display with automatic backlight makes settings easier, and programming takes only a few simple steps—setting the start time, duration and watering frequency. This provides reliable, precise irrigation even during holidays or longer absences.

Technical specifications

✔️ Manufacturer: Rain S.p.A.

✔️ Series: My Farm Balcony

✔️ Type: Automatic drip irrigation kit

✔️ Maximum capacity: up to 30 pots

✔️ Included timer: AMICO+

✔️ Installation: To a standard water tap

✔️ Irrigation type: Drip

✔️ Suitable for outdoor and indoor use

✔️ Easy installation without specialised tools

✔️ Can be expanded with additional Rain components.

📦 The kit includes

✔️ 1 × Timer AMICO+

✔️ Main polyethylene tube

✔️ Capillary hose

✔️ Drippers for up to 30 plants

✔️ Connecting fittings

✔️ End caps

✔️ Fixing clips

✔️ Adapters for connecting to a water source

✔️ Detailed installation instructions.

Benefits

✔️ Automatically waters up to 30 pots

✔️ Significantly reduces water consumption

✔️ Maintains constant substrate moisture

✔️ Protects plants from drying out while you are away

✔️ Easy "Do it yourself"

✔️ Timer with digital display included

✔️ Individual water supply to each plant

✔️ Suitable for balconies, terraces, greenhouses and gardens

✔️ Compatible with Rain components for future expansion.

📋 Instructions for use

1. Connect the AMICO+ timer to the water tap.
2. Lay out the main pipe according to the arrangement of the pots.
3. Connect the capillary tubes and drippers to each pot.
4. Use the timer to set the desired watering time, duration and frequency.
5. Start the system and check that all drippers are working correctly.
6. If necessary, adjust the position of the drippers for optimal watering.

⚠️ Important: Before first use, flush the system with clean water to remove any contamination from the tubing. We recommend using a filter at the water source, especially with harder or contaminated water, to prevent drippers from clogging.

💡 Urban Botaniks tip: If you use pots of different sizes, position the drippers so water reaches as close as possible to the base of each plant. This will provide even moisture to the root system and increase watering efficiency.

Water Master is a high-quality digital timer for irrigation, specifically designed to control drip irrigation systems and sprinkler irrigation.

• uses an efficient solenoid valve
• up to 8 watering cycles per day
• programming the frequency and watering duration
• easy and quick to install on any tap

Technical specifications:

• Connections: ¾ male and ¾ female connector
• Batteries: 2 x AAA (not included)

A reliable, easy-to-set-up water timer for a single irrigation zone — it automates watering in a garden, greenhouse, or on a balcony, so plants receive water regularly without manual intervention.

• Type: 1-zone digital water timer.
• Operating pressure: 0.5–8 bar (≈ 7–116 PSI).
• Maximum flow rate (throughput): up to 35 L/min.
• Watering duration: from 1 to 240 minutes (up to 4 hours).
• Watering frequency: every 1–12 hours or at intervals of 1–7 days — selected according to plant needs.
• Power supply: 2 × AA (1.5 V) batteries.
• Operating temperature range: 3 °C–50 °C.
• Valve / connections: standard threads for tap and hose.
• Low-battery indicator and frost protection — at temperatures below ~3 °C, the device should be removed to prevent damage.
• Operating modes: automatic (scheduled), manual watering (without changing the main schedule), and a "Rain-Delay" option (postponement in rain/high humidity).

Recommendations for use

• Install the timer on a standard garden tap or hose, before the pipe/hose leading to the plants.
• Set a schedule: choose a convenient start time, duration, and frequency — this allows regular watering without manual intervention.
• When you are away or have an unpredictable schedule, the timer ensures that plants receive water even when you are not there.
• For winter: remove the device if frost is expected — the water inside may freeze and damage the housing.
• Maintain normal pressure (0.5–8 bar) and good flow rate — excessively low or high pressure, or clogged filters, can disrupt watering.

Automatic irrigation system for up to 10 pots at once — provides regular, even watering when you are away or do not have time to water by hand.

Detailed features

• Type: automatic drip/micro-irrigation system (drip irrigation / micro-drip system). 

• Suitable for: pots, terraces, balconies, greenhouses or small gardens — up to 10 individual plants (pots). 

• Material: plastic components (tubes, fittings), resistant to moisture and standard garden conditions. 

• Power supply / control: the system includes a control element (timer / valve) for automatic water delivery according to a set schedule. 

• Suitable water pressure and flow rate: a system for home gardens / pots — does not require professional plumbing.

• Use: automatic watering of pots/containers — can reduce the need for manual watering, especially when you are away.

Recommendations for use

• Connect the system to a water source — tap, faucet or hose — and place one tube in/next to each container or pot.

• Set a watering schedule (frequency and duration) according to the plants’ needs — more often for fresh greens and flowers, less often for resilient or deep-rooted plants.

• When planting out or repotting, ensure the soil is well moistened before watering and set the system for moderate delivery.

• If you are away, the system will maintain moisture automatically, but it is advisable to check the tubes and distribution periodically to prevent blockages.

• For maximum effectiveness, combine with well-drained pots and a suitable substrate to avoid overwatering.

AgroDrip 30 is a ready-made drip irrigation kit designed for up to 30 pots or plants. The system delivers water precisely and directly to the root zone, reducing water use and making daily plant care easier. The kit is suitable for balconies, terraces, greenhouses and small gardens, and can easily be connected to a water tap.

AgroDrip 30 is a practical solution for building a compact drip system without specialised tools. Thanks to the included microtubes, drippers and fittings, installation is quick and easy, while every plant receives the required amount of water directly in the root zone. This improves plant development and considerably reduces water loss through evaporation.

The kit is suitable for irrigating up to 30 pots and allows easy adaptation to the arrangement of your plants. When needed, the system can be combined with an irrigation controller for automatic watering, ensuring fully automated operation and reliable irrigation even when you are away.

Using drip irrigation maintains consistent substrate moisture, limits overwatering and creates optimal conditions for growing vegetables, herbs, ornamental plants and flowers outdoors as well as in greenhouses.

Technical specifications

✔️ Manufacturer: Agrodrip 

✔️ Model: Agrodrip 30

✔️ Type: Drip irrigation kit

✔️ Capacity: up to 30 pots or plants

✔️ Installation: To a water tap

✔️ Suitable for outdoor and indoor use

📦 The kit includes:

✔️ Pipe Ø16 mm – 15 m

✔️ Microtube Ø6 mm – 30 m

✔️ 20 pcs. Quick connector F16 x 3/4"

✔️ 100 pcs. Adjustable stake drippers

✔️ 20 pcs. Stake drippers

✔️ 20 pcs. Barbed tee Ø6 mm

✔️ 2 pcs. Barbed tee Ø16 mm

✔️ 2 pcs. Barbed elbow Ø6 mm

✔️ 2 pcs. Barbed elbow Ø16 mm

✔️ 1 pc. Barbed connector Ø7 mm x Ø6 mm

✔️ 1 pc. Awl Ø7 mm

✔️ 2 pcs. Barbed coupler Ø16 mm

✔️ 10 pcs. Barbed end cap Ø6 mm

✔️ 2 pcs. End clamp Ø16 mm

Application

Suitable for:

• Potted plants

• Balcony flowers

• Vegetables in pots

• Herbs

• Greenhouses

• Terraces

• Conservatories

• Yards

• Home and professional gardens.

📋 Instructions for use

1. Connect the kit to a water tap using the included adapters.
2. Position the main microtube according to the location of the pots.
3. Install the tees, elbows and drippers at each plant.
4. Check the system for leaks and correct water distribution.
5. If desired, connect the system to an automatic watering timer.
6. Periodically check the drippers and clean them when necessary.

⚠️ Important: For reliable operation and a longer system lifespan, it is recommended to use filtered water or install a filter before the system. This reduces the risk of dripper clogging and ensures even watering.

💡 Urban Botaniks tip: If you want fully automatic irrigation, combine AgroDrip 30 with an irrigation controller. This way, your plants will receive the required amount of water on set days and at set times, even when you are away from home.

AgroDrip 15 is a ready-made drip irrigation kit designed for up to 15 pots or plants. The system delivers water precisely to the root zone, reducing water consumption and making daily plant care easier. The kit is suitable for balconies, terraces, greenhouses and small gardens, and can easily be connected to a water tap.

AgroDrip 15 is a practical solution for building a compact drip system without specialised tools. Thanks to the included microtubes, drippers and fittings, installation is quick and easy, and each plant receives the required amount of water directly in the root zone. This improves plant development and significantly reduces water loss through evaporation.

The kit is suitable for irrigating up to 15 pots and can be easily adapted to the arrangement of the plants. If necessary, the system can be combined with an automatic watering timer, providing fully automated operation and trouble-free irrigation even when you are away.

Using drip irrigation maintains consistent substrate moisture, limits overwatering and creates optimal conditions for growing vegetables, herbs, ornamental plants and flowers outdoors as well as in greenhouses.

Technical specifications

✔️ Manufacturer: Agrodrip 

✔️ Model: Agrodrip 15

✔️ Type: Drip irrigation kit

✔️ Capacity: up to 15 pots or plants

✔️ Installation: To a water tap

✔️ Suitable for outdoor and indoor use

📦 The kit includes:

✔️ Microtube Ø6 mm – 30 m

✔️ Microtube Ø7 mm – 1 m

✔️ 15 pcs. drippers with stake

✔️ 20 pcs. Ø6 mm barbed tees

✔️ 2 pcs. Ø6 mm barbed elbows

✔️ 1 pc. Ø7 × Ø6 mm barbed connector

✔️ 1 pc. male connector 1/2" × Ø7 mm

✔️ 1 pc. reducing coupling 3/4" × 1/2".

Application

Suitable for:

• Potted plants

• Balcony flowers

• Vegetables in pots

• Herbs

• Greenhouses

• Terraces

• Conservatories

• Yards

• Home and professional gardens.

📋 Instructions for use

1. Connect the kit to a water tap using the included adapters.
2. Position the main microtube according to the location of the pots.
3. Install the tees, elbows and drippers at each plant.
4. Check the system for leaks and correct water distribution.
5. If desired, connect the system to an automatic watering timer.
6. Periodically check the drippers and clean them when necessary.

⚠️ Important: For reliable operation and a longer system lifespan, it is recommended to use filtered water or install a filter before the system. This reduces the risk of dripper clogging and ensures even watering.

💡 Urban Botaniks tip: If you want fully automatic irrigation, combine AgroDrip 15 with a watering timer. This way, plants will receive the required amount of water on precisely scheduled days and times, even when you are away from home.

Automatic irrigation timer for 1 zone, which controls the water supply according to a set schedule — convenient for gardens, greenhouses, flower beds and hose irrigation systems.

• Type: 1-zone electronic timer.
• Power supply: batteries (2xAA)
• Material: ABS+PP housing, resistant to outdoor conditions.
• Operating pressure: approximately 0.5–8 bar, suitable for standard plumbing/hose systems.
• Watering settings: option to set frequency — from hourly to daily, and repetitions from 1 day to 7 days.
• Functions: automatic watering, waterproof housing, convenient for home gardens and greenhouses.

Recommendations for use

• Connect the timer to a standard hose or irrigation system, set the desired watering time and frequency — the device will take care of it automatically.
• Suitable for gardens, balconies, greenhouses, pots, flower beds — where you cannot water manually every day.
• A good choice when no one is present (holiday, travel, etc.) to maintain regular moisture.
• Use only at water pressure between 0.5 and 8 bar

Water Master electric sprayer with a 2-litre capacity, designed for precise and convenient application in the garden, hydroponics or at home. Lightweight, ergonomic design with an adjustable nozzle for a fine mist or a powerful jet stream. Powered by a 2000mAh lithium battery that charges quickly via USB-C. Made from recyclable materials for a longer lifespan. 

Detailed features

• Capacity: 2 litres
• Material: recyclable ABS, PP and HDPE
• Battery: lithium, 2000mAh, 3.7V
• Charging: USB Type-C cable (included)
• Dimensions: ø13 × 28.7 cm
• Weight: ~550 g
• Nozzle: adjustable for mist or jet
• Design: lightweight, ergonomic, easy to use even in hard-to-reach areas

Recommendations for use

• Charge fully before use with the supplied USB-C cable.
• Use the mist function for precise watering, or the jet when concentrated application is required.
• Thanks to the recyclable material and built-in battery, the product is more environmentally friendly.
• Suitable for watering, fertilising and pest-control spraying.

Summary – Benefits

• Convenient capacity: 2 litres — ideal for quick tasks.
• Battery with USB-C charging: a convenient, battery-powered solution without the need for additional batteries.
• Flexible spraying: adjustable between mist and jet.
• Compact and durable: lightweight and ergonomic, made from durable materials.
• Eco-friendly choice: recyclable housing, less waste.