Products

• Dimensions: 90x90x180cm.
• Suitable Lighting: 1 x HPS 400W
• Recommended Ventilation: min. 185m³/h - max. 350m³/h

high-end grow tent - 90x90x180cm

Lightproofing - class A (100% lightproof). Made from highly reflective mylar (95% reflectance). Strong polypropylene corners. Sturdy support bars (hold up to 30kg). Easy to assemble and convenient to use.


dimensions (internal): 90x90x180 cm
weight: 9,8kg
material: 210D - 95% reflection, class II lightproofing
recommended lighting: 1x400W HPS, with cooling
recommended ventilation: 100mm, min 120m3/h
doors: one at the front
air duct ports: inlet: 2x203mm, outlet: 1x203mm, for cooltube: 2x203mm
additional extras: cover for the entire tent, waterproof tray, StrapIT and HookIT accessories

Mammoth Propagator 125 is a medium-sized propagator that provides very good conditions for planting or cloning plants over an area of 3.12 m². This budget-friendly mini propagator is suitable for both hobbyists and more advanced gardeners.

• ideal for seeds and cuttings / clones
• dimensions: 126 x 62 x 145cm
• 3 removable shelves with adjustable height
• steel poles: ⌀ 16mm
• reflective lining: Mylar Silver 190D
• ventilation opening: ⌀ 203mm
• easy and quick assembly

Advantages:

• fully lightproof, easy-to-clean single-layer cover
• silver lining Mylar Silver 190D with reflectivity of ~ 90%
• solid corners and connectors made of rigid PP polymer
• metal tubes with a diameter of 16mm and a thickness of 0.4mm are made of lightweight steel
• ports for ventilation and cable routing
• removable floor tray
• easy and quick assembly

Technical specifications:

• dimensions: 126 x 62 x 145cm
• growing area: 3.12m²
• 3 removable shelves with adjustable height
• access opening: front door
• ventilation opening: ⌀ 203mm
• cable opening: ⌀ 76mm

Mammoth Propagator 90 is a medium-sized propagator that provides excellent conditions for sowing or cloning plants over an area of 0.54m². This budget mini propagator is suitable for both hobby growers and more experienced gardeners.

• ideal for seeds and cuttings / clones
• dimensions: 90 x 60 x 60cm
• steel poles: ⌀ 16mm
• reflective lining: Mylar Silver 190D
• ventilation port: ⌀ 150mm
• easy and quick assembly

Advantages:

• fully lightproof, easy-to-clean single-layer cover
• silver Mylar Silver 190D lining with ~ 90% reflectivity
• robust corners and connectors made from rigid PP polymer
• metal poles with a diameter of 16mm and a thickness of 0.4mm are made of lightweight steel
• ports for ventilation and cable routing
• removable floor tray
• easy and quick assembly

Technical specifications:

• dimensions: 90 x 60 x 60cm
• growing area: 0.54m²
• access opening: front door
• side opening: 2 pcs.
• ventilation port: ⌀ 150mm
• cable-routing port: ⌀ 76mm

Price per 80l bag - 80 BGN

Mapito is the most popular growing substrate in the Netherlands, with excellent results and a new main component. Mapito is recommended as one of the best growing substrates. Mapito is a substrate mix that uses mineral wool and PU (polyurethane) flakes. Mapito contains organic elements that accelerate plant growth. It has a solid structure with an optimal balance of water and oxygen. Thanks to its qualities, you will achieve unique results. Before use, rinse Mapito to lower the current EC value. After doing this, you can start with the desired EC value. Mapito maintains pH values between 5.5-5.8.

Mari 600W is a high-quality and durable product – one of the best and best-selling in its class on the market. The lighting kit is designed to work with HPS (sodium) and MH (metal-halide) lamps.

• the kit includes: magnetic ballast, igniter and capacitor
• for HPS and MH lamps
• power: 600W
• power consumption: 6.2A
• voltage: 230V, 50Hz
• dimensions L/W/H: 295x110x115mm
• weight: 6.4kg

• Marix Disc
• Prevents soil/compost from escaping the pots and entering the irrigation system.

Master Products MT Dry 500 is a high-performance professional machine for dry cleaning (trimming) flowers, designed for medium-scale growers seeking maximum productivity, precision and gentle crop handling. Thanks to its innovative cutting system, the MT Dry 500 preserves the structure, appearance and quality of the flowers while achieving a capacity of up to 22 kg/hour. The machine is compact, easy to transport, and can be disassembled and cleaned without tools in just one minute.

MT Dry 500 is designed for professional post-harvest processing of dry flowers, where final-product quality is of primary importance. Thanks to the carefully developed cutting system and the rotating drum with a diameter of 400 mm, the machine provides uniform and precise cleaning without affecting the structure and natural appearance of the flowers.

Made entirely of stainless steel and aluminium, the MT Dry 500 is designed for intensive daily work. The cutting blades are made of food-grade nylon, which ensures gentle product handling and high wear resistance. Thanks to the machine's adjustable tilt, loading is quick and convenient, while the removable collection box allows easy collection of residual material.

One of the MT Dry 500's greatest advantages is its exceptionally easy maintenance. The drum, motor and electrical components can be removed without tools, allowing complete cleaning in under one minute. The manufacturer recommends using hot pressurised water for optimal cleaning and maintenance.

The machine also offers 2-in-1 functionality. By replacing the standard drum with a 120-micron drum for Dry Sift, the MT Dry 500 can be used as a pollen-extraction machine. When required, it can also be fitted with a CO₂ Cooling Kit, which cools the product during processing and increases trichome yield in Dry Sift production.

Technical specifications

✔️ Manufacturer: Master Products

✔️ Model: MT Dry 500

✔️ Type: Professional dry-cleaning machine

✔️ Capacity: up to 22 kg/hour

✔️ Power supply: 230 V / 50–60 Hz

✔️ Motor power: 180 W

✔️ Drum diameter: 400 mm

✔️ Drum working length: 760 mm

✔️ Rotation speed: 27 RPM

✔️ Housing material: Stainless steel and aluminium

✔️ Drum material: Stainless steel

✔️ Blade material: Food-grade nylon

✔️ Adjustable loading tilt

✔️ Removable collection box

✔️ Blade tension regulator

✔️ Puncture-resistant pneumatic wheels

✔️ Does not require an extraction system

✔️ Tool-free disassembly

✔️ Noise level: 65 dB

✔️ Dimensions: 970 × 840 × 1290 mm

✔️ Weight: 53 kg

✔️ Certification: CE

✔️ Warranty: 5 years.

📦 The kit includes

✔️ 1 × Machine Master Products MT Dry 500

✔️ 1 × Dry-cleaning drum

✔️ 1 × Collection box

✔️ 1 × Front protective cover

✔️ Blade set

✔️ User manual.

📋 Instructions for use

1. Place the machine on a level, stable surface.
2. Adjust the tilt according to the required load.
3. Load the dry material into the drum.
4. Start the machine and collect the processed product in the lower collection box.
5. After finishing work, remove the drum and clean the machine with hot pressurised water.
6. When required, replace the drum with a pollen drum for Dry Sift production.

⚠️ Important: The machine is designed to work with dry material. The manufacturer recommends regular cleaning after each use to maintain maximum performance and a long service life.

💡 Tip from Urban Botaniks: If you plan both dry cleaning and Dry Sift production, the MT Dry 500 offers an excellent upgrade option. Simply replace the standard drum with a pollen drum and, if desired, add a CO₂ Cooling Kit for even higher trichome-extraction efficiency.

🔹 MT DRY 100 LiTE is a compact and powerful automatic trimmer designed for efficient and precise dry trimming of cannabis flowers and spices. With a capacity of up to 1.8 kg/h and adjustable speed, it ensures high-quality processing while preserving the trichomes and structure of the flowers. Ideal for small and medium-sized growers seeking professional equipment at an affordable price.

🔹 Detailed specifications:

• Manufacturer: Master Trimmers
• Model: MT DRY 100 LiTE
• Motor power: 120 W (DC 24V)
• Drum speed: 30–50 rpm (adjustable)
• Blade material: PE1000 (suitable for food contact)
• Drum material: Stainless steel
• Drum diameter: 25 cm
• Drum length: 65 cm
• Processing capacity: up to 1.8 kg/h (300–400 g per batch)
• Noise level: 60 dB
• Dimensions: 40.6 x 34.9 x 36.4 cm
• Weight: 10 kg
• Certifications: CE, RoHS
• Warranty: 2 years

🔹 Recommendations and instructions for use:

1. Shake the machine well before use.
2. Place the cannabis flowers in the drum, ensuring that they are evenly distributed.
3. Set the desired drum speed using the controller.
4. Turn on the machine and let it run until the desired level of trimming is achieved.
5. After completing the process, turn off the machine and clean all components according to the manufacturer's instructions.

✅ Benefits of use:

• High efficiency: Fast and precise trimming of cannabis flowers.
• Quality preservation: Minimal loss of trichomes and terpene compounds.
• Easy to use: Intuitive controls and quick setup.
• Compact design: Ideal for small and medium-sized production facilities.
• Easy cleaning: Tool-free system for quick disassembly and cleaning.

​

• processing capacity: up to 3.5 kg/h (approximately 800 g per load)
• drum diameter: ⌀ 250 mm
• motor power: 90 W
• made of stainless steel
• handles for convenient transport
• easy-to-fit front cover
• collection box; no extraction required
• blades made from food-grade nylon
• tool-free disassembly

Master Trimmer Gentle is a leaf trimmer designed for growers looking for a machine that operates more automatically thanks to its loading container and silicone "fingers", which move and turn the buds across the grate. Beneath it are two sharp and calibrated blades of hardened steel, whose height can be adjusted for more precise trimming. The trimmer’s "fingers" are powered by a powerful gear motor that guarantees constant power, even when the buds are large and heavy or the machine is dirty.

MT Gentle can easily be converted into an MT Standard simply by adding a grate, without any tools.

• soft silicone "fingers" that move flower buds without damaging them
• powerful gear motor providing constant speed
• adjustable leg tilt for easier discharge of the processed flower
• large transparent lid for loading the container
• large side opening for easier removal of the processed flower
• made of 100% stainless steel
• adjustable anti-vibration rubber pads
• collection bag for trimmed leaves
• can process up to 9kg/h of wet flowers

How to use MT Gentle:

MT Gentle is designed for removing excess leaves and twigs from plants and herbs that need to be prepared for essential-oil extraction or for drying flowers.

Separate the flower buds from the harvested branches. Lift the top cover and place the buds to be processed in the loading container. The flowers should form an even layer across the entire grate surface, without areas of accumulation. Do not overfill the container or pile up the buds, otherwise you will not achieve satisfactory results. Once the machine is loaded with unprocessed wet flowers, let it run. When the desired trim is achieved (after around 45 seconds), open the outlet door to collect the processed flowers. Clean the machine from time to time and empty the bag of trimmed leaves.

Features:

• The gentlest way to trim your plants to perfection.
• The safest, cleanest and fastest way to clean your plants.
• Made of stainless steel without any type of paint, to prevent contamination of the flowers / herbs.
• Stainless steel is a hygienic, clean and durable material. It also prevents oxidation.
• With an electric motor and a high-power gear motor to move the flowers without clogging or overheating the motor.
• Adjustable tilt for fast release of the flowers.
• Very quiet.
• Equipped with a powerful motor and 2 sharp, calibrated hardened-steel blades for durable, precise cutting.
• The unit is supported by 4 legs that provide stability no other trimmer offers.​

2 trimmers in 1:

• Turn your MT Gentle into an MT Standard simply by changing the grate and adding 2 wings. No tools are required. Depending on the type of plant and growing method, you can choose whether to work with MT Gentle or MT Standard.

Technical specifications:

• power: 180W
• voltage: 230V
• product weight: 30kg
• product dimensions: 50 x 50 x 130cm
• package dimensions: 54 x 64 x 62cm
• wet-flower processing capacity: 9kg/h
• blades: 2 pcs
• working width: 45cm
• material: 100% stainless steel
• blade-height adjustment: yes
• powerful air-cooled gear motor: yes
• air-cooled motor: yes
• quick-access window to the upper container: yes
• safety system: yes
• silicone "fingers": yes
• air suction: no
• warranty: 5 years

Technical manual: here*

Warning:

• Wear gloves* and safety glasses at all times!
• Never place your fingers or other body parts on the grid!
• Never use or place metal objects / scissors on the grid!
• Never apply pressure to the grid!
• MasterProducts accepts no responsibility and is not liable, either directly or indirectly, for any damage or harm caused as a result of improper use of its products!

*We recommend using tight-fitting latex gloves, as looser gloves may get caught in the openings of the grid and cause an unwanted accident!

Master Trimmer Gentle 75 is a leaf trimmer designed for growers seeking a machine that operates more automatically, thanks to its loading container and silicone "fingers", which move and rotate the buds across the grid. Beneath it are two sharp and calibrated blades made of hardened steel, the height of which can be adjusted for more precise trimming. The trimmer's "fingers" are driven by a powerful gear motor that ensures constant power, even when the buds are large and heavy or the machine is dirty.

Unlike the smaller MT Gentle model, MT Gentle 75 is equipped with a rotation-speed controller for the silicone "fingers", allowing it to be adapted to the type and needs of the flower being processed!

MT Gentle 75 can easily be converted into MT Standard 75 simply by adding a grid, with no tools required.

• soft silicone "fingers" that move flower buds without damaging them
• powerful gear motor providing constant speed
• rotation-speed controller for the silicone "fingers"
• adjustable leg tilt for easier discharge of the processed flower
• large transparent lid for loading the container
• large side opening for easier removal of the processed flower
• made of 100% stainless steel
• adjustable anti-vibration rubber pads
• collection bag for trimmed leaves
• can process up to 25kg/h of wet flower

How to use MT Gentle 75:

MT Gentle 75 is designed for removing excess leaves and branches from plants and herbs that need to be prepared for essential-oil extraction or for drying the flowers.

Separate the flower buds from the harvested branches. Lift the top lid and place the buds to be processed into the loading container. The flowers must form an even layer over the entire surface of the grid, without areas of accumulation. Do not overfill the container or pile up the buds, otherwise you will not achieve satisfactory results. Once the machine is filled with unprocessed wet flower, let it run. When the desired trimming is achieved (after about 45 seconds), open the outlet door to collect the processed flower. Clean the machine from time to time and empty the bag of trimmed leaves.

Features:

• Designed to meet the requirements of large-scale growers. Fast cleaning of your plants.
• Built on the same principle as MT Gentle, but more powerful and offering a greater quantity of processed flower per hour.
• The gentlest way to trim your plants to perfection.
• The safest, cleanest and fastest way to clean your plants.
• Made of stainless steel without any type of paint, to prevent contamination of the flowers / herbs.
• Stainless steel is a hygienic, clean and durable material. It also prevents oxidation.
• With an electric motor and a high-power gear motor to move the flowers without clogging or overheating the motor.
• Adjustable tilt for fast release of the flowers.
• Very quiet.
• Equipped with a powerful motor and 4 sharp, calibrated hardened-steel blades for durable and precise cutting.
• The unit is supported by 4 legs that provide stability no other trimmer offers.​
• Rotation-speed control for the silicone "fingers", allowing you to adapt the movement speed to the type and needs of the flower being processed.

2 trimmers in 1:

• Turn your MT Gentle 75 into an MT Standard 75 simply by changing the grid and adding 2 wings. No tools required. Depending on the plant type and cultivation method, you can choose whether to work with MT Gentle 75 or MT Standard 75.

Technical specifications:

• power: 250W
• voltage: 230V
• product weight: 70kg
• product dimensions: 75 x 75 x 130cm
• package dimensions: 83 x 81 x 70cm
• wet-flower processing capacity up to: 25kg/h
• blades: 4 pcs
• working area: 70cm
• material: 100% stainless steel
• blade-height adjustment: yes
• powerful air-cooled gear motor: yes
• air-cooled motor: yes
• quick-access window to the upper container: yes
• safety system: yes
• silicone "fingers": yes
• silicone "finger" speed control: yes
• air suction: no
• warranty: 5 years

Technical manual: here*

Warning:

• Wear gloves* and safety glasses at all times!
• Never place your fingers or other body parts on the grid!
• Never use or place metal objects / scissors on the grid!
• Never apply pressure to the grid!
• MasterProducts accepts no responsibility and is not liable, either directly or indirectly, for any damage or harm caused as a result of improper use of its products!

*We recommend using tight-fitting latex gloves, as looser gloves may get caught in the openings of the grid and cause an unwanted accident!

Master Trimmer Pocket is a portable, small, very powerful and quiet  leaf trimmer. It is ideal for quickly turning any space into a trimming area for your plants.

• two sharp blades made of hardened steel
• height adjustment of the blades for more precise trimming
• two screens included for trimming small and large flowers
• made from 100% stainless steel
• clamp for mounting to a table, without holes or screws
• collection bag for trimmed leaves
• can process up to 4kg/h of wet flowers

How to use the MT Pocket:

Master Trimmer Pocket is a portable, small, very powerful and quiet  trimmer for removing excess leaves and twigs from plants and herbs such as basil, coriander, lavender,  parsley, mint, oregano, rosemary and others, as well as for preparing them for essential-oil extraction or drying flowers. Hold a freshly picked plant branch in your hand and move it back and forth over the screen, rotating the plant as well, to achieve even trimming. Clean the machine from time to time and empty the bag of trimmed leaves.

Features:

• A trimmer for home use, designed for quick and efficient cleaning of your plants.
• Lightweight, sturdy and adaptable to any table. No screws or holes required.
• Made of stainless steel without any paint, to avoid contaminating flowers / herbs.
• Stainless steel is a hygienic, clean and durable material. It also prevents oxidation.
• Two 8mm and 10mm screens are provided. You can choose the size according to the flowers you wish to trim.
• Equipped with 2 sharp hardened-steel blades for greater durability and a longer cutting life.
• Very quiet.
• All spare parts are available in stock.

Technical specifications:

• power: 90W
• voltage: 230V
• product weight: 5kg
• product dimensions: 35 x 25 x 20cm
• package dimensions: 35 x 27 x 24cm
• wet flower processing capacity up to: 4kg/h
• blades: 2 pcs
• working area: 22cm
• material: 100% stainless steel
• blade-height adjustment: yes
• 8mm screen included: yes
• 10mm grille included in the kit: yes
• warranty: 5 years

Technical manual: here*

Warning:

• Wear gloves* and safety glasses at all times!
• Never place your fingers or other body parts on the grid!
• Never use or place metal objects / scissors on the grid!
• Never apply pressure to the grid!
• MasterProducts accepts no responsibility and is not liable, either directly or indirectly, for any damage or harm caused as a result of improper use of its products!

*We recommend using tight-fitting latex gloves, as looser gloves may get caught in the openings of the grid and cause an unwanted accident!

Designed for large growers, the Master Trimmer Professional is one of the fastest automated trimmers on the market. It is equipped with self-closing inlet and outlet openings on the loading container, as well as a top feeder, which increase safety and operating speed. The speed controller lets you adjust the rotation speed of the four blades to achieve the required trimming quality in optimal time. The motor power ensures long-lasting and efficient operation of the machine.
MT Professional can easily be converted into MT Standard simply by adding a grid, with no tools required.

• blade rotation speed controller
• feeder with an automated lid for greater safety and faster operation
• quick-access cover to prevent blockages
• transparent outlet tube for processed flowers
• four calibrated and sharp blades made of hardened steel
• blade height adjustment for more precise trimming
• durable and calibrated grid for precise trimming
• made of 100% stainless steel
• adjustable anti-vibration rubber pads
• collection bag for trimmed leaves
• can process up to 12kg/h of wet flowers

How to use MT Professional:

MT Professional is designed for removing excess leaves and small branches from plants and herbs that need to be prepared for essential oil extraction or for drying the flowers. 

Separate the flower buds from the harvested branches. Fill the top feeder with flowers without piling them up or pushing them inside. Open the inlet to allow the buds to fall onto the grid in the upper container. The flowers will begin moving over the grid. Use the speed controller to control flower movement. Make sure all buds roll and make contact with the grid. Reduce the speed if you notice that the flowers are not contacting the grid, or increase it if you notice that they are not moving. Once the desired trimming has been achieved (after approximately 45 seconds), open the outlet to collect the processed flowers. Clean the machine and empty the bag containing trimmed leaves from time to time.

Features:

• A safe, fast and clean way to trim your plants.
• Made of stainless steel without any type of paint, to prevent contamination of the flowers / herbs.
• Stainless steel is a hygienic, clean and durable material. It also prevents oxidation.
• The most automated trimmer on the market.
• The self-closing inlet and outlet openings on the loading hopper, providing unmatched working speed.
• Equipped with a powerful motor and 4 sharp, calibrated hardened-steel blades for durable and precise cutting.
• The unit is supported by 4 legs that provide stability no other trimmer offers.​
• Transparent outlet tube for processed flowers.

2 trimmers in 1:

• Turn your MT Professional into MT Standard simply by changing the grid and adding 2 wings. No tools required. Depending on the plant type and growing method, you can choose whether to work with MT Professional or MT Standard.

Technical specifications:

• power: 180W
• voltage: 230V
• product weight: 30kg
• product dimensions: 50 x 50 x 130cm
• package dimensions: 54 x 64 x 62cm
• wet flower processing capacity, up to: 12kg/h
• blades: 4 pcs
• working width: 45cm
• material: 100% stainless steel
• blade speed controller: yes
• blade-height adjustment: yes
• air-cooled motor: yes
• quick-access window to the upper container: yes
• safety system: yes
• air intake: yes
• warranty: 5 years

Technical manual: here*

Warning:

• Wear gloves* and safety glasses at all times!
• Never place your fingers or other body parts on the grid!
• Never use or place metal objects / scissors on the grid!
• Never apply pressure to the grid!
• MasterProducts accepts no responsibility and is not liable, either directly or indirectly, for any damage or harm caused as a result of improper use of its products!

*We recommend using tight-fitting latex gloves, as looser gloves may get caught in the openings of the grid and cause an unwanted accident!

Designed for large-scale growers, Master Trimmer Professional 75 is one of the fastest automated trimmers on the market. It is equipped with self-closing inlet and outlet openings on the loading hopper, as well as a top feeder, increasing work safety and speed. The speed controller allows you to adjust the RPM of the four blades, achieving the required quality trim in optimum time. The power of the motor ensures long-lasting and efficient machine operation.
MT Professional 75 can easily be converted into an MT Standard 75 simply by adding a grille, with no tools required.

• blade rotation speed controller
• feeder with an automated lid for greater safety and faster operation
• quick-access cover to prevent blockages
• transparent outlet tube for processed flowers
• four calibrated and sharp blades made of hardened steel
• blade height adjustment for more precise trimming
• sturdy and calibrated grille for precise trimming
• made of 100% stainless steel
• adjustable anti-vibration rubber pads
• collection bag for trimmed leaves
• can process up to 30kg/h of wet flowers

How to use MT Professional 75:

MT Professional 75 is designed for removing excess leaves and branches from plants and herbs that need to be prepared for essential oil extraction or for drying flowers. 

Separate the flower buds from the harvested branches. Fill the top feeder with flowers without piling or pushing them inside. Open the inlet to let the buds fall onto the grille in the upper hopper. The flowers will begin moving across the grille. Use the speed controller to control flower movement. Make sure all buds roll and make contact with the mesh. Reduce the speed if you notice the flowers are not making contact with the grille, or increase the speed if you notice they are not moving. Once the desired trimming is achieved (after about 45 seconds), open the outlet to collect the processed flowers. Occasionally clean the machine and empty the bag of trimmed leaves.

Features:

• Designed to meet the needs of large-scale growers.
• Built on the same principle as MT Professional, but more powerful and offering a higher output of processed flowers per hour.
• A safe, fast and clean way to trim your plants.
• Made of stainless steel without any type of paint, to prevent contamination of the flowers / herbs.
• Stainless steel is a hygienic, clean and durable material. It also prevents oxidation.
• The most automated trimmer on the market.
• The self-closing inlet and outlet openings on the loading hopper, providing unmatched working speed.
• Equipped with a powerful motor and 4 sharp, calibrated hardened-steel blades for durable and precise cutting.
• The unit is supported by 4 legs that provide stability no other trimmer offers.​
• Control of blade rotation speed, allowing you to adapt the movement speed to the type and needs of the flowers being processed.
  

2 trimmers in 1:

• Convert your MT Professional 75 into an MT Standard 75 simply by changing the grille and adding 2 wings. No tools required. Depending on the plant type and growing method, you can choose whether to work with MT Professional 75 or MT Standard 75.

Technical specifications:

• power: 250W
• voltage: 230V
• product weight: 70kg
• product dimensions: 75 x 75 x 140cm
• package dimensions: 83 x 81 x 70cm
• wet flower processing capacity up to: 30kg/h
• blades: 4 pcs
• working area: 70cm
• material: 100% stainless steel
• blade speed controller: yes
• blade-height adjustment: yes
• air-cooled motor: yes
• quick-access window to the upper container: yes
• safety system: yes
• air intake: yes
• warranty: 5 years

Technical manual: here*

Warning:

• Wear gloves* and safety glasses at all times!
• Never place your fingers or other body parts on the grid!
• Never use or place metal objects / scissors on the grid!
• Never apply pressure to the grid!
• MasterProducts accepts no responsibility and is not liable, either directly or indirectly, for any damage or harm caused as a result of improper use of its products!

*We recommend using tight-fitting latex gloves, as looser gloves may get caught in the openings of the grid and cause an unwanted accident!

Master Trimmer Standard is an efficient and quiet trimmer for leaves that is easy to operate and can be easily dismantled for transport. Its stability and strength, combined with its height and large working surface, allow not only comfortable operation but also up to two people to work simultaneously.

• two calibrated and sharp blades made of hardened steel
• height adjustment of the blades for more precise trimming
• a sturdy, calibrated grid for precise trimming
• made of 100% stainless steel
• adjustable anti-vibration rubber pads
• easily dismantled for transport and maintenance
• collection bag for trimmed leaves
• can process up to 9kg/h of wet flowers

How to use the MT Standard:

Master Trimmer Standard is an efficient and quiet trimmer, which is easy to operate and can be easily dismantled for transport. It is designed for removing excess leaves and twigs from plants and herbs such as basil, coriander, lavender, parsley, mint, oregano, rosemary and others, as well as for preparing them for essential-oil extraction or for drying flowers. Hold a freshly picked plant branch in your hand and move it back and forth over the grid while rotating the plant, to achieve even trimming. Clean the machine occasionally and empty the bag of trimmed leaves.

Features:

• One of the fastest and quietest trimmers. Quickly cleans your plants.
• Very stable and tall enough for comfortable operation.
• Made of stainless steel without any type of paint, to prevent contamination of the flowers / herbs.
• Stainless steel is a hygienic, clean and durable material. It also prevents oxidation.
• Equipped with a powerful motor and 2 sharp, calibrated hardened-steel blades for durable, precise cutting.
• The unit is supported by 4 legs, providing stability that no other trimmer offers.
• The legs are fitted with adjustable anti-vibration rubber pads.

Technical specifications:

• power: 90W
• voltage: 230V
• product weight: 21kg
• product dimensions: 50 x 50 x 95cm
• package dimensions: 53 x 53 x 39cm
• wet-flower processing capacity: 9kg/h
• blades: 2 pcs
• working width: 45cm
• material: 100% stainless steel
• blade-height adjustment: yes
• air-cooled motor: yes
• protection system: yes
• air suction: yes
• operation: up to 2 people
• warranty: 5 years

Technical manual: here*

Warning:

• Wear gloves* and safety glasses at all times!
• Never place your fingers or other body parts on the grid!
• Never use or place metal objects / scissors on the grid!
• Never apply pressure to the grid!
• MasterProducts accepts no responsibility and is not liable, either directly or indirectly, for any damage or harm caused as a result of improper use of its products!

*We recommend using tight-fitting latex gloves, as looser gloves may get caught in the openings of the grid and cause an unwanted accident!

Master Trimmer Standard 75 is an efficient and quiet trimmer for leaves, which is easy to use and can be easily dismantled for transport. Its stability and sturdiness, together with its height and large surface area, allow not only comfortable work, but also up to four people to work simultaneously.

• four calibrated and sharp blades made of hardened steel
• height adjustment of the blades for more precise trimming
• a sturdy, calibrated grid for precise trimming
• made of 100% stainless steel
• adjustable anti-vibration rubber pads
• easily dismantled for transport and maintenance
• collection bag for trimmed leaves
• can process up to 22kg/h of wet flowers

How to use the MT Standard 75:

Master Trimmer Standard 75 is an efficient and quiet  leaf trimmer, which is easy to use and can be easily dismantled for transport. It is designed to remove excess leaves and small branches from plants and herbs such as basil, coriander, lavender, parsley, mint, oregano, rosemary, etc., as well as for preparing them for essential oil extraction or for drying the flowers. Hold a branch of a freshly picked plant in your hand and move it back and forth over the grate while rotating the plant, to achieve an even trim. Clean the machine and empty the bag of trimmed leaves from time to time.

Features:

• Designed to meet the requirements of large-scale growers. Fast cleaning of your plants.
• Very stable and tall enough for comfortable operation.
• Built on the same principle as MT Standard, but more powerful and able to process a larger quantity of wet flower per hour.
• Made of stainless steel without any type of paint, to prevent contamination of the flowers / herbs.
• Stainless steel is a hygienic, clean and durable material. It also prevents oxidation.
• Equipped with a powerful motor and 4 sharp, calibrated hardened-steel blades for durable and precise cutting.
• The unit is supported by 4 legs, providing stability that no other trimmer offers.
• The legs are fitted with adjustable anti-vibration rubber pads.

Technical specifications:

• power: 250W
• voltage: 230V
• product weight: 40 kg
• product dimensions: 75 x 75 x 100cm
• packaging dimensions: 79 x 79 x 38cm
• wet flower processing capacity up to: 22 kg/h
• blades: 4 pcs
• working area: 70cm
• material: 100% stainless steel
• blade-height adjustment: yes
• air-cooled motor: yes
• safety system: yes
• air intake: yes
• operation: up to 4 people
• warranty: 5 years

Technical manual: here*

Warning:

• Wear gloves* and safety glasses at all times!
• Never place your fingers or other body parts on the grid!
• Never use or place metal objects / scissors on the grid!
• Never apply pressure to the grid!
• MasterProducts accepts no responsibility and is not liable, either directly or indirectly, for any damage or harm caused as a result of improper use of its products!

*We recommend using tight-fitting latex gloves, as looser gloves may get caught in the openings of the grid and cause an unwanted accident!