Everything for Seedlings

The Propagator Pro 70 seedling-growing set is sturdy and durable. It is easily ventilated through ventilation openings in the lid. The walls and lid are slightly angled so that condensed water runs to the sides rather than onto the plants.

• Dimensions: 58cm length, 38cm width, 24cm height
• The set includes: a waterproof tray and lid
• The lid is fitted with adjustable ventilation openings
• Made of hard, dense plastic - does not bend
• Material: polypropylene PP (tray) and polystyrene PS (lid)

The propagator is sold without a seedling-cell tray (insert). Suitable options are:

Eazy Plug CT150 and Eazy Plug CT77

Cultilene rockwool cubes - 77pc tray

Jiffys-7 - 41mm tray with 60 cells

You can also place small pots inside: Soft seedling pot 7x7x8cm

Clonex MIST 750ml is the latest innovation in cloning technology, developed to make cloning even more successful. An innovative, advanced combination of amino acids and mineral nutrients to accelerate healthy root development. Clonex Mist is a ready-to-use product that provides:

• rapid root formation
• healthy plants
• consistent results every time

Instructions for use:

• Choose a healthy plant with good, healthy shoot tips. If possible, spray the plant tips with Clonex Mist once or twice a week before taking cuttings. 
• Use a sharp, clean blade, such as a scalpel, to make a diagonal cut at the base of the stem, just below the lowest leaf node.
• If you have Clonex rooting gel, promptly dip the cutting into the gel.
• Then immediately place the cutting in the growing medium, such as rockwool or Jiffy, which you have pre-moistened.
• Spray the new cuttings with Clonex Mist and place them in a propagator. Keep the lid and vents closed.
• After 2-3 days, spray the shoots again with Clonex Mist and open the propagator vents slightly.

Check the new roots after a few days - continue spraying with Clonex Mist until the plant is ready to be transplanted. If planting in soil, carefully place the soil around the roots to avoid damaging them.

TIP: Repeat spraying every 2-3 days or if your cuttings look dry. Open the propagator vents a little more each day. Light condensation inside the propagator indicates suitable relative humidity.

Secret Jardin Cosmorrow Power 1x40W is a power supply for one 40W LED bar from the Cosmorrow series.

• power: 40W
• voltage: 100-220V
• frequency: 50/60 Hz
• weight: 0.70kg
• protection rating: IP54

Grodan rockwool cubes - tray of 150 pcs. for rooting.

• tray size: 53x32 cm.
• cube size: 2.5x2.5x4 cm.

Garland Micro Greens Reservoir Tray Without Holes is the ideal tray for growing microgreens. Use it together with the Garland Micro Greens Growing Tray With Holes. Used together, the two trays provide optimal watering and drainage for your microgreens. The tray can also be used as a “blackout” tray when turned upside down and placed over the microgreens growing tray, accelerating the seed germination process in the first days after planting.

• material: injection-moulded plastic Bisphenol A-free (BPA)
• robust and durable plastic allows repeated use for years
• 100% recyclable
• dimensions: 56 x 28 x 3 cm

Grodan Delta rockwool block 7.5x7.5cm with a large hole, 1 pc. for hydroponics.

• cube dimensions: 7.5 x 7.5 x 6.5 cm
• hole diameter: ⌀ 4cm

Secret Jardin Cosmorrow LED 20W PPE2.7 L50cm Growing is a single LED bar for the vegetative growth phase of indoor-grown plants. The power supply is not included and is sold separately. You can purchase it here!

• for growth
• power: 20W
• voltage: 24V
• efficacy: 2.7 µmol/s
• Colour temperature: 6500K
• coverage area: 60 x 40cm (when suspended 15cm above the top of the plants)
• water resistance: IP65
• warranty: 1 year

Technical specifications:

• for growth
• power: 20W
• voltage: 24V
• current: 0.83A
• efficacy: 2.7 µmol/s
• Colour temperature: 6500K
• coverage area: 60 x 40cm (when suspended 15cm above the top of the plants)
• water resistance: IP65
• dimensions: 47 x 3.2 x 1.5cm
• weight: 0.16 kg

Cultilene 10x10cm rockwool block with a large hole, 1 pc. for hydroponics.

• block dimensions: 10 x 10 x 6.5cm
• hole size: ⌀ 4cm

ROOTiT Propagator Lid is a lid for a ROOT!T propagator.

• two humidity-control vents
• dimensions: 57x37x15.5cm

ROOT!T Large Heat Mat is a heating mat that evenly warms the root zone, improving germination and rooting. Maintaining a constant temperature is a key factor for success in the early stages, when young plants are most delicate and vulnerable.

• Dimensions W/L: 40x120cm.
• Accelerates seed germination or rooting of clones by whole days.
• Warms the root zone 5.5-11˚C above ambient temperature.
• Fully waterproof, scratch-resistant and durable.
• To set your desired precise temperature, use together with the ROOT!T heat mat thermostat.

Instructions for use:

1. Place the heat mat on a thoroughly dry surface.
2. For better results, place the mat on an insulated surface rather than directly on a cold floor.
3. Place the propagation tray (seeds, clones) on the mat. Cover it with a propagator lid – this will keep the root zone warm and maintain humidity for better rooting.
4. Connect to the mains power supply (220-240V).
5. This heat mat is designed to warm the root zone 5.5–11˚C above the ambient temperature.

Warning:

• Fire or electric shock may result from improper use!
• Make sure there are no sharp objects on the surface beneath the heat mat that could puncture it! Do not place the mat directly in the tray / propagator and do not cover it with soil or another growing medium!
• Do not cover the mat with heat-insulating materials, as this may cause overheating!
• Do not immerse in water!

PLAGRON Seedbox is a complete set for faster and more vigorous seed germination. Used by both hobbyists and professional gardeners, it is a guarantee of success during the initial stage of your plants' development. The set contains:

• small propagator
• 12 germination plugs / pellets
• 250 ml rooting stimulant Plagron Seedbooster
• instruction booklet in 12 languages

Dosage and directions for use:

1. Dissolve the entire bottle of Seedbooster rooting stimulant in 250 ml of lukewarm water. Stir gently.
2. Pour the solution into the tray, distributing the liquid evenly over the germination plugs. Wait a few minutes until the plugs absorb all the water.
3. With clean hands, take the seeds and plant them at a depth of 5 mm in the holes in the centre of the germination plugs.
4. Place the transparent lid on the tray. Ensure that the lid fits exactly between the slots on the inside of the tray. This will close the propagator completely.
5. Place the propagator in a room with a temperature of 20–24 °C.
6. After 1 to 5 days, the seeds will begin to germinate. Remove the lid from the slots and place it slightly askew on the tray, creating four small openings through which fresh air can reach the seedlings.
7. Ensure that the seedlings receive enough light to develop properly. Once the seedlings reach the plastic lid, it can be removed. As soon as roots begin to grow out of the germination plugs, the plants are ready for transplanting and further cultivation.

Grow healthy plants from seed at home or in your greenhouse with the Garland Professional Seed tray for seed germination and seedlings. Grow

• like the professionals! For seed germination, growing microgreens or rooting seedlings drainage holes,
• reducing the risk of overwatering Practical,
• space-saving size Made from
• recycled plastic 100% recyclable
• Dimensions: 37

x 23.5 x 6 cm

Heating mat for mini propagators 50/25 cm with thermostat

Short description:

• Optimal control: Maintains the ideal temperature for germination and growth.
• Thermostat set: Easy adjustment and precise temperature control.
•  Ideal for beginners: Suitable for mini propagators and home gardening.

Detailed description:

Improve conditions for your propagators with this 50/25 cm heating mat, paired with a precise thermostat for temperature control. This set is perfect for beginner and experienced gardeners, providing optimum conditions for seed germination and seedling development.

Features:

• Dimensions: 50/25 cm – ideal for small propagators.
• Thermostat set: Precise temperature control for even heating.
• Convenience: Easy to install and operate, suitable for home use.
• Energy efficiency: Provides a stable temperature with low energy consumption.
• Versatility: Suitable for all types of seeds and plants.

Eazy Plug CT24 tray with 24 dry rooting and seedling plugs / blocks made from a specially formulated substrate with added nutrients. It provides good water (nutrient solution) and air permeability, which is very important for developing a strong root system from the very beginning.

• for seed germination or for rooting cuttings / clones
• for fast and vigorous rooting
• always the perfect water/air ratio (20/80%)
• 100% biodegradable

Note: the tray is made of soft plastic and can easily be divided into 2 smaller sections, suitable for use with the EP 32 seed-rooting propagator.

Directions for use: It is that simple — just water them thoroughly and allow the excess water to drain away! Eazy Plug will automatically regulate the optimum moisture level.

Features:

• Plug dimensions: 3.5 x 3.5 x 3.0 cm
• Tray dimensions: 28.5 x 19.0 x 3.0 cm
• EC: 1 mS/cm
• pH: 5.9

Benefits of Eazy Plug:

• self-regulating
• easy to use
• air pruning for a significant increase in root mass
• suitable for progressively drier growing

Compatibility:

• Eazy Plug is compatible with all known growing media, such as rockwool, coco substrate, black and white peat, garden soil, potting soil, soilless growing, fine bark and wood mulch, wood fibre, perlite, pumice, sand, clay and vermiculite.

Applications:

• Eazy Plug can be used in ebb-and-flow hydroponic irrigation systems (Ebb & Flow), drip irrigation, NFT*, wick systems, floating rafts, DWC*, aquaponic systems and soil cultivation (indoors and outdoors).

Moistening time:

• when top-watered < 10 seconds
• when immersed < 10 seconds
• drip irrigation – depends on the preset amount
• when bottom-watered < 45 seconds

Cultilene rockwool block 7.5x7.5cm with large hole, 1 pc. for hydroponics.

• block size: 7.5 x 7.5 x 6.5cm
• hole size: ⌀ 4cm

Garland Micro Greens Growing Tray With Holes is the ideal tray for growing microgreens. Use it in combination with the Garland Micro Greens Reservoir Tray Without Holes. Used together, the two trays provide optimal watering and drainage for your microgreens.

• material: injection-moulded plastic Bisphenol A-free (BPA)
• robust and durable plastic allows repeated use for years
• 100% recyclable
• dimensions: 56 x 28 x 3 cm

• Speeds up the rooting process by up to 2 days.
• Made from organic and environmentally friendly materials.
• Suitable for all soil mixes and substrates.

Root Riot rooting and germination cubes are designed to provide the best conditions for fast, healthy plant growth. They speed up the rooting process by up to two days compared with traditional rockwool cubes, while offering a natural, environmentally friendly alternative.

• Effective: Guarantee fast growth and stable rooting.
• Versatile: Ideal for transplanting into Janeco Light Mix, Plagron Coco, Grow Mix or organic soil mixes.
• Eco-friendly: Made from organic materials that are safe for the environment.

With Root Riot, your plants get the perfect start for maximum results!

ROOT!T Small Heat Mat is a heating mat, which warms the root zone evenly, improving germination and rooting. Maintaining a constant temperature is a key factor for success in the early stages, when young plants are most delicate and vulnerable.

• W/L dimensions: 25x35cm.
• Speeds up seed germination or the rooting of clones by days.
• Warms the root zone 5.5-11˚C above ambient temperature.
• Fully waterproof, scratch-resistant and durable.
• To set your desired precise temperature, use together with the ROOT!T heat mat thermostat.

Instructions for use:

1. Place the heat mat on a thoroughly dry surface.
2. For better results, place the mat on an insulated surface rather than directly on a cold floor.
3. Place the propagation tray (seeds, clones) on the mat. Cover it with a propagator lid – this will keep the root zone warm and maintain humidity for better rooting.
4. Connect to the mains power supply (220-240V).
5. This heat mat is designed to warm the root zone 5.5–11˚C above the ambient temperature.

Warning:

• Fire or electric shock may result from improper use!
• Make sure there are no sharp objects on the surface beneath the heat mat that could puncture it! Do not place the mat directly in the tray / propagator and do not cover it with soil or another growing medium!
• Do not cover the mat with heat-insulating materials, as this may cause overheating!
• Do not immerse in water!

Grow healthy plants from seed at home or in your greenhouse with the Garland Professional Gravel seedling and propagation tray. Grow like the professionals!

• For seed germination, growing microgreens or rooting seedlings
• Practical, space-saving size
• Made from recycled plastic
• 100% recyclable

Dimensions: 37 x 23.5 x 6 cm

Benefits:

• Speeds up the rooting process by up to 2 days.
• Made from organic and environmentally friendly materials.
• Suitable for all soil mixes and substrates.

Root Riot rooting and germination cubes are designed to provide the best conditions for fast, healthy plant growth. They speed up the rooting process by up to two days compared with traditional rockwool cubes, while offering a natural, environmentally friendly alternative.

• Effective: Guarantee fast growth and stable rooting.
• Versatile: Ideal for transplanting into Janeco Light Mix, Plagron Coco, Grow Mix or organic soil mixes.
• Eco-friendly: Made from organic materials that are safe for the environment.

With Root Riot, your plants get the perfect start for maximum results!

🔹 Solux i-Clone 2x10W LED Tube is a compact and efficient LED light designed to optimally illuminate rooting cuttings and support mother plants. With its full-spectrum lighting and the ability to connect up to 10 tubes in series, this product offers flexibility and efficiency for any indoor garden.

🔹 Detailed specifications:

• Manufacturer: Solux
• Model: i-Clone 2x10W LED Tube
• Lighting type: LED tube with two 10W LEDs
• Color temperature: 6500K (suitable for vegetative growth and flowering)
• Light efficiency: 2.4 μmol/s per watt
• Product lifespan: 55,000 hours
• Dimensions: 61.5 x 3.1 x 3.8 cm
• Weight: 180 g
• IP protection: IP65 (resistant to dust and moisture)
• Connection: Ability to connect up to 10 tubes in series via IP65 input/output
• Package contents: 2 LED tubes, power cable, mounting brackets

🔹 Recommendations and instructions for use:

1. Choose a suitable location for installing the tubes, ensuring good light distribution.
2. Use the supplied mounting brackets to secure the tubes to a wall or ceiling.
3. Connect the tubes sequentially using the IP65 input/output connectors to connect up to 10 tubes in series.
4. Connect the power cable to the first tube and plug it into the electrical network.
5. Adjust the lighting according to the plants' needs, ensuring a suitable photoperiod and light intensity.

✅ Benefits of use:

• Improved rooting: Stimulates fast and healthy rooting of cuttings.
• Support for mother plants: Provides optimal conditions for keeping mother plants healthy.
• Flexibility: Ability to connect up to 10 tubes in series, allowing easy expansion of the lighting system.
• Energy efficiency: Low energy consumption and long product lifespan.
• Durability: IP65 protection against dust and moisture, suitable for various indoor conditions.

Lux-Rooting V.2 power cable for LED seedling lights:

• Lux-Rooting TL LED V.2 12W 60cm 6500K 2.3μmol/J – LED growth light
• Lux-Rooting TL LED V.2 24W 120cm 6500K 2.3μmol/J – LED growth light

Features:

• length: 1.5 m
• plug: yes
• protection: IP65

Compressed peat plug Jiffy-7 33 mm, which expands when moistened and serves as a self-expanding substrate for seeds and cuttings.

Detailed features

• Delivery format: compressed disc (diameter when dry)
• Size after saturation: diameter ~ 33 mm
• Materials: peat (sphagnum peat), wrapped in biodegradable netting (to EN13432 standard)
• pH value: around 5.3 (when using the peat variant)
• Electrical conductivity (EC): ~ 1.1 (± 0.3) for standard Jiffy-7
• The price is for 1 pellet, available loose, in packs of 100 units or boxes of 1000 units. 
• Porosity / air capacity: high, to stimulate root growth
• Expansion: after moistening, the pellet expands several times (up to 5–7 times
• Sustainability and certification: biodegradability to the EN13432 standard, products with ISO certifications

Recommendations for use

• Place the dry pellet in a suitable container and pour in warm, clean water, allowing it to expand.
• Once it has expanded, drain off the excess water so that the substrate is not overly wet.
• Sow the seeds or insert the cuttings directly into the pellet.
• Maintain moderate moisture, but avoid overwatering — slight drying is better than retaining water.
• Once the plants have developed sufficiently, the pellet can be planted directly into soil or a larger container — there is no need to separate it, which minimises root damage.
• After use, the netting decomposes according to a biodegradability standard, making the product environmentally friendly.

Benefits

The Jiffy-7 33 mm pellet combines substrate and container in one; when moistened, it becomes an ideal medium for germination and plant rooting. Its high porosity and suitable chemical characteristics support root development, while the environmentally friendly netting allows direct planting without stressing the plants.

Compressed peat pellet Jiffy-7 41 mm, pack of 1000, which expands when moistened and serves as a self-expanding substrate for seeds and cuttings.

Detailed features

• Delivery format: compressed disc (diameter when dry)
• Size after saturation: diameter ~ 41 mm
• Materials: peat (sphagnum peat), wrapped in biodegradable netting (to EN13432 standard)
• pH value: around 5.3 (when using the peat variant)
• Electrical conductivity (EC): ~ 1.1 (± 0.3) for standard Jiffy-7
• The price is for a carton of 1000 pellets. Available loose, in packs of 100 or cartons of 1000. 
• Porosity / air capacity: high, to stimulate root growth
• Expansion: after moistening, the pellet expands several times (up to 5–7 times
• Sustainability and certification: biodegradability to the EN13432 standard, products with ISO certifications

Recommendations for use

• Place the dry pellet in a suitable container and pour in warm, clean water, allowing it to expand.
• Once it has expanded, drain off the excess water so that the substrate is not overly wet.
• Sow the seeds or insert the cuttings directly into the pellet.
• Maintain moderate moisture, but avoid overwatering — slight drying is better than retaining water.
• Once the plants have developed sufficiently, the pellet can be planted directly into soil or a larger container — there is no need to separate it, which minimises root damage.
• After use, the netting decomposes according to a biodegradability standard, making the product environmentally friendly.

Benefits

The Jiffy-7 41 mm pellet combines substrate and container in one; when moistened, it becomes an ideal environment for plant germination and rooting. Its high porosity and suitable chemical characteristics support root development, while the ecological net wrap allows direct planting without plant stress.

Advantages:

• Speeds up the rooting process by up to 2 days.
• Made from organic and environmentally friendly materials.
• Suitable for all soil mixes and substrates.

Root Riot rooting and germination cubes are specially designed to provide the best conditions for the rapid and healthy development of your plants. They speed up the rooting process by up to two days compared with traditional rockwool cubes, while offering a natural and environmentally friendly alternative.

Why choose Root Riot?

• Effective: Guarantee fast growth and stable rooting.
• Versatile: Ideal for transplanting into Janeco Light Mix, Plagron Coco, Grow Mix or organic soil mixes.
• Eco-friendly: Made from organic materials, completely safe for the environment.

Give your crop a good start!

Secret Jardin TLED 26W L54cm Full Spectrom is a single LED bar for the growth and flowering stages of indoor-grown plants. Ideal for additional vertical lighting for plants in your grow tent.

• for growth and flowering
• Power: 42W
• efficiency: 2.0µmol/s
• coverage area: 120 x 60cm (when suspended 15cm above plant tops)
• protection rating: IP54
• lifespan: + 50 000 hours
• warranty: 1 year
• Power cable: yes

Technical specifications:

• for growth and flowering
• Power: 42W
• efficiency: 2.0µmol/s
• Coverage area: 120 x 60cm (when suspended 15cm above the tops of the plants)
• voltage: 100-220V
• frequency: 50/60 Hz
• Dimensions: 95 x 4 x 3cm
• Weight: 0.58kg
• protection rating: IP54
• lifespan: + 50 000 hours

🔹 Garland Small High Dome Propagator is a compact and efficient tool for growing seedlings and cuttings. Measuring 38 x 24 x 18 cm, it is ideal for placing on a windowsill, providing optimal conditions for germination and growth. The transparent lid with an adjustable ventilation opening allows easy humidity control, while the specially designed tray ensures effective drainage.

🔹 Detailed features:

• Dimensions: 38 x 24 x 18 cm
• Materials: Durable plastics suitable for repeated use
• Lid: Transparent with an adjustable ventilation opening
• Tray: Designed for effective drainage and preventing water retention
• Color: Green with a transparent lid
• Manufacturer: Garland Products

🔹 Recommendations and instructions for use:

1. Place a suitable potting mix or substrate in the tray.
2. Plant the seeds or cuttings in the prepared mix.
3. Place the lid on the tray and adjust the ventilation opening to provide optimal conditions for germination.
4. Place the propagator in a bright, warm location, such as a windowsill.
5. Check the moisture regularly and water when necessary.

✅ Benefits of use:

• Ideal size: Its compact dimensions make it suitable for any space.
• Humidity control: The adjustable ventilation opening allows easy humidity management.
• Effective drainage: The specially designed tray prevents excess water from accumulating.
• Reusable: Durable materials ensure long-lasting use.

Cultilene 10 x 10 cm rockwool cube with a small hole, 1 pc. for hydroponics.

• cube dimensions: 10 x 10 x 6.5 cm
• hole dimensions: ⌀ 2.5 cm

EP 42 Cover is a lid for the EP 42 propagator for rooting seeds.

• made of soft plastic
• dimensions L/W/H: 38 x 24 x 9 cm

Kit for germination of seeds and rooting of cuttings with built-in LED lighting. The system provides a suitable environment for the early development of plants, supporting stable germination and a healthy start of seedlings. It is suitable for home cultivation, greenhouses or use in seasons with less natural light.

Capacity: 40 individual nests for seeds or cuttings, allowing simultaneous germination of a large number of plants.

Lighting: equipped with 2 LED strips with cold light, which provide additional light for better development of young plants.

Dimensions: 38 × 24 × 12 cm — compact size, suitable for placing on a table, shelf or work surface.

Construction: includes a tray and seedling compartments that facilitate organized germination and plant maintenance.

Purpose: suitable for germinating vegetables, herbs, flowers and other plants, as well as for rooting cuttings.