Latest arrivals

TPH01802 is a combination soil tester for checking plant moisture, pH, and light levels.

Features

• Three modes: soil moisture, pH, and light.
• Probe for contact with the soil.

How to use

Follow the instructions for moisture measurement and sample preparation. Do not immerse in water or leave in the soil continuously. Clean the probes after use. Soil readings do not replace an EC analysis or nutrient solution measurement.

Browse thermohygrometers and moisture meters.

Cornwall TH3 monitors humidity and temperature at the unit and provides a second temperature reading via an external probe.

Features

• Probe temperature: −50 to 70°C.
• Temperature at the unit: 0 to 50°C.
• Humidity: 20 to 98% RH.
• Humidity resolution: 1% RH. Accuracy: ±5% RH.
• Temperature accuracy: ±1°C. Power: AAA battery, included.

How to use

The two temperature readings allow you to compare two locations. The external probe does not provide a second humidity measurement channel.

Browse thermohygrometers and hygrometers.

VDL Germinador Pro, germination kit, 9 × 1.5 cm

VDL Germinador Pro is a compact seed germination kit with temperature monitoring. The 9 × 1.5 cm size differs from the smaller Germinador Pro Mini.

Features and purpose

• Offered size: 9 × 1.5 cm.
• Germination dish with lid, Petri dish style.
• Contact thermometer for monitoring temperature.
• Two cotton pads and a box for providing a dark environment.
• The range includes H₂O₂; check the consumables and instructions on the packaging supplied.

Helpful tips for choosing and using

Moisten the pads and arrange the seeds according to the kit instructions and the plant species’ requirements.

Monitor the moisture and the thermometer reading. The thermometer measures temperature but does not regulate it automatically.

Important information for use

• Results depend on the seeds and conditions; the kit does not guarantee germination.
• Use H₂O₂ only according to the concentration and instructions on the bottle. Protect your eyes and store consumables out of children’s reach.

Related products and sizes

• VDL Germinador Pro Mini, germination kit, 5.5 × 1.5 cm

More garden accessories

Browse all gardening accessories and tools.

Bluelab 2.77 mS/cm conductivity standard for compatible EC meters.

Features and intended use

• Nominal EC value: 2.77 mS/cm.
• Package size: 18 ml.
• Used for checking or calibration when the specific meter supports this standard value.

Use and compatibility

Follow the manual for the selected model. Some EC meters are factory-calibrated, and the standard is used for checking after cleaning. Use a fresh portion without contaminating the remaining solution.

Browse EC standards and solutions.

Root Plus 1.5 l – perforated pot

The perforated Root Plus pot is designed to optimize root growth. Its cylindrical shape, together with its conical ventilation holes, provides better air circulation and prevents roots from becoming tangled. 

• up to 30% faster growth compared with ordinary pots
• improves the uptake of water and nutrients
• encourages more vigorous and healthier growth
• volume: 1.5 l.
• height: 15 cm
• diameter: ⌀ 12 cm
• color: black inside, white outside
• origin: Korea

Healthy roots are the most important part of a plant's life! The "air pruning" design of Root Plus pots gives your plants a healthy root structure.

What exactly is "air pruning" of roots? The walls of Root Plus pots have a conical texture. This encourages roots to grow toward the ventilation holes without becoming tangled. When the root tips reach the edges of the holes, they come into contact with the air and dehydrate, which automatically stimulates the growth of more root hairs and new root branches. This process then repeats again and again, until the plants develop a healthy root structure that is essential for absorbing water and nutrients for strong growth. 

Features:

• no tangled roots
• easy moisture control
• sufficient thickness to protect plants from overheating in intense sunlight
• quick and easy assembly
• side ventilation holes allow excellent air circulation to the roots
• grid bottom, promoting air circulation and drainage

Advantages:

• excellent air circulation and drainage
• development of abundant root hairs
• made from high-quality materials
• sturdy and durable
• UV protection
• recyclable

Soft plant tie wire, Ø 5 mm (5 m)

Flexible, soft PVC wire for tying plants, ideal for securing stems and vines to supports or stakes without damaging their bark or tissue.

• Length:≈ 5 m
• Diameter:≈ 5 mm
• Material: Soft PVC
• Strength: sturdy enough to support heavy stems and the increasing weight of fruit or vines.

VENTS RT-10 is a compact mechanical room thermostat for automatic control of fans, heating and air-conditioning systems according to room temperature. It allows the desired temperature to be set in the range +10°C to +30°C and, depending on the connection method, can switch equipment on or off when the set temperature threshold is reached. It operates at 220–240 V / 50–60 Hz, has IP40 protection and is intended for indoor wall mounting.

VENTS RT-10 is an easy and reliable solution for automating temperature control in rooms where ventilation, heating or air-conditioning systems operate. Instead of switching the fan or other equipment on and off manually, the RT-10 monitors room temperature and controls the electrical load according to a preset temperature threshold.

The desired temperature is set using the rotary control on the front panel, with an operating range of +10°C to +30°C. The thermostat can operate with different logic depending on the electrical connection – the contacts can open or close as the temperature rises or falls. This allows the RT-10 to be used both for controlling ventilation/cooling and in applications where heating control is required.

For example, when used with a fan, the controller can be configured so that the fan starts when the set temperature is reached and runs until the temperature falls below the specified threshold. In another configuration, the fan can run until a preset temperature is reached.

The RT-10 has a relatively small hysteresis of about 0.5–1°C, allowing the temperature to be maintained within a narrow range around the selected value without excessively frequent switching of the connected equipment.

The housing is made of plastic, allowing discreet wall mounting. The manufacturer recommends installing the thermostat at approximately 1.5 m above the floor, away from windows, doors, heating appliances and other sources that may affect actual temperature measurement.

Technical specifications

✔️ Manufacturer: VENTS
✔️ Model: RT-10
✔️ Type: Room temperature controller / thermostat
✔️ Temperature range: +10°C to +30°C
✔️ Hysteresis: 0.5–1°C
✔️ Power supply: 220–240 V AC
✔️ Frequency: 50/60 Hz
✔️ Maximum ambient temperature: +40°C
✔️ Protection rating: IP40 (on the front-panel side)
✔️ Electrical protection class: Class II
✔️ Housing material: Plastic
✔️ Dimensions: 84 × 84 × 35 mm
✔️ Weight: up to 0.13 kg
✔️ Mounting: Vertical indoor wall mounting.

⚡ Maximum permissible load

The maximum load depends on the connection configuration used.

For the configuration with higher permissible load:

✔️ Resistive load: up to 10 A
✔️ Inductive load: up to 3 A

For the alternative configuration:

✔️ Resistive load: up to 6 A
✔️ Inductive load: up to 2 A.

When connecting a fan, the permissible inductive load must be considered, not only the maximum value for resistive load.

🔄 Control modes

Depending on the selected electrical wiring diagram, VENTS RT-10 allows different operating logic:

✔️ Switching on when the temperature rises – suitable, for example, for a fan that needs to start when the room becomes too warm.

✔️ Switching off when the set temperature is reached – suitable for applications in which the system must operate until the desired temperature threshold is reached.

✔️ Using the thermostat as a standard temperature-controlled electrical socket.

This flexibility makes the RT-10 suitable not only for standard domestic ventilation, but also for a variety of professional climate-control applications.

📦 The kit includes

According to the manufacturer's manual:

✔️ 1 × VENTS RT-10 thermostat

✔️ Product documentation / passport

✔️ Installation screws and fasteners

✔️ Packaging.

🔧 Applications

VENTS RT-10 can be used for automatic control of:

• Duct fans
• Extract ventilation
• Supply ventilation
• Heating systems
• Air-conditioning systems
• Greenhouses
• Plant nurseries
• Storage rooms
• Workshops
• Technical rooms
• Other spaces requiring automatic temperature control.

📋 Installation and use

1. Choose a suitable location for installation on the wall.
2. The recommended height is approximately 1.5 m above the floor.
3. Do not place the RT-10 directly next to windows, doors, heating appliances or other heat sources.
4. Connect the thermostat according to the appropriate diagram for the desired operating logic.
5. Set the desired temperature using the rotary control.
6. After switching on, the system will automatically control the connected equipment according to the room temperature.

⚠️ Important: The RT-10 operates on 220–240 V mains voltage. Installation and electrical connection must be carried out with the power supply switched off and by a qualified person, according to the manufacturer's electrical diagram. The thermostat is intended for indoor installation and must not be exposed to water, precipitation or direct water splashes.

💡 Advice from Urban Botaniks: When controlling ventilation, place the RT-10 where it reflects the actual average temperature of the room. Avoid direct airflow from a fan or air conditioner, as well as immediate proximity to lighting and heating units – otherwise the thermostat may respond to the local temperature rather than the actual conditions in the room.

VENTS VKF 4E 450 is a professional axial duct fan for systems that require high airflow at relatively low resistance. The model is designed for direct installation in an air duct and provides a maximum airflow of up to 4680 m³/h at a power rating of 250 W. Its robust steel housing with polymer coating, single-phase AC motor with ball bearings and integrated thermal protection make it suitable for greenhouses, warehouses, production premises and other professional ventilation installations.

VENTS VKF 4E 450 is part of the industrial series of axial fans VENTS OV / OVK / VKF. The main difference of the VKF is its construction designed for direct installation in a ventilation duct, allowing it to be easily integrated into supply and extract ventilation systems.

The fan is suitable for applications where it is necessary to move a large volume of air at relatively low system resistance. At a 50 Hz power supply, the model reaches a maximum airflow of 4680 m³/h, while the motor operates at approximately 1350 rpm and consumes 250 W.

The construction has been developed with an emphasis on reliability during continuous operation. The housing and impeller are made of steel with a durable polymer coating, providing mechanical strength and additional protection for the metal surfaces.

The 4E model uses a four-pole single-phase asynchronous AC motor with an external rotor. The motor has integrated thermal-overload protection, and the ball bearings are designed for a long service life. For this series, the manufacturer specifies a bearing design life of at least 40 000 operating hours.

Another important advantage is the possibility of speed control. When using a suitable thyristor or autotransformer controller, the speed can be controlled smoothly or in steps. This makes it possible to adapt the airflow to the actual requirements of the room.

The operating temperature range at 50 Hz is from -30°C to +60°C, allowing the fan to be used in a variety of conditions. The VKF series has a stated protection rating of IPX4.

Technical specifications

✔️ Manufacturer: VENTS
✔️ Series: VKF
✔️ Model: VKF 4E 450
✔️ Type: Axial duct fan
✔️ Installation: In a duct
✔️ Motor type: AC, asynchronous with external rotor
✔️ Number of poles: 4
✔️ Phases: 1
✔️ Power supply: 220–240 V
✔️ Frequency: 50/60 Hz
✔️ Power at 50 Hz: 250 W
✔️ Current consumption at 50 Hz: 1.2 A
✔️ Maximum air flow at 50 Hz: 4680 m³/h
✔️ Speed at 50 Hz: 1350 rpm
✔️ Noise level at 3 m: 56 dB(A)
✔️ Operating temperature at 50 Hz: -30 to +60°C
✔️ VKF protection rating: IPX4
✔️ Bearings: Ball bearings
✔️ Design bearing life: minimum 40 000 hours.

When operating at 60 Hz

✔️ Power: 325 W
✔️ Current: 1.46 A
✔️ Maximum airflow: 4790 m³/h
✔️ Speed: 1600 rpm
✔️ Noise level at 3 m: 57 dB(A)
✔️ Transported-air temperature: -30 to +50°C.

📐 Dimensions and weight

For VKF 4E 450, the official manual states:

📦 The kit includes

✔️ 1 × VENTS VKF 4E 450 axial fan

✔️ Factory-fitted motor and impeller

✔️ Terminal box for electrical connection

The speed controller and the remaining duct-system components are used separately according to the specific installation.

Benefits

✔️ High airflow – up to 4680 m³/h

✔️ Direct installation in a ventilation duct

✔️ Robust steel construction

✔️ Protective polymer coating

✔️ Single-phase AC motor with external rotor

✔️ Built-in thermal overheating protection

✔️ Ball bearings for long-term operation

✔️ Speed-control capability

✔️ Operating range up to +60°C at 50 Hz

✔️ Suitable for professional supply and extract systems.

🔧 Applications

VENTS VKF 4E 450 is suitable for:

• Greenhouses
• Nurseries
• Storage areas
• Production areas
• Workshops
• Technical rooms
• Commercial and industrial facilities
• Supply ventilation
• Extract ventilation
• Ventilation systems requiring high airflow.

📋 Installation and use

1. Choose a suitable location in the ventilation system.
2. Install the fan securely in the relevant duct.
3. Match the airflow direction to the marking on the housing.
4. Make the electrical connection according to the diagram and the official VENTS manual.
5. If necessary, add a compatible speed controller.
6. After installation, check for vibration, unusual noise and correct airflow direction.
7. Carry out periodic maintenance and clean the impeller.

⚠️ Important: VKF 4E 450 is an high-flow axial fan, intended mainly for systems with relatively low aerodynamic resistance. In systems with a high pressure drop, multiple bends, long ducts or highly restrictive filters, it is important that the fan be sized according to the actual operating point, rather than only according to the maximum free airflow.

💡 Tip from Urban Botaniks: When designing greenhouse or professional ventilation, do not choose the fan solely by the 4680 m³/h rating. Take into account the diameter and length of the ducts, the number of bends, grilles and other resistance in the system to obtain the necessary actual

Agrolite Dark Night Green LED Light 20W – green light

Agrolite Dark Night Green LED Light 20W is a bulb that emits green light, allowing you to observe your plants during the dark hours. 

• power: 20W
• light: green LED 
• socket: E27

Plants do not photosynthesize under green light (510nm), so they can be observed when needed, without stressing them or affecting their life cycle.

Bluelab pH PenPlus measures pH and temperature using a replaceable pH ProbePlus probe.

Features and intended use

• pH range: 0.0 to 14.0.
• pH resolution: 0.1.
• pH accuracy at 25°C: ±0.1.
• Two-point pH calibration.
• Replaceable Bluelab pH ProbePlus module.

Operation and compatibility

Measures liquid samples. For direct measurement in soil, choose a soil probe designed for this purpose. Keep the pH electrode hydrated with the prescribed solution.

Browse pH meters.

N. Hydro yellow traps are used for the control of flying insects and monitoring their populations in outdoor and greenhouse agriculture. The pests are attracted by the yellow color, land, and stick to the trap.

• They are effective against whitefly*, aphids*, fungus gnats* and leafminers*.
• One pack contains 50 traps.
• Composition: non-toxic adhesive and light-resistant polyethylene.
• Dimensions: 10 x 30 cm.

Each sheet has grid lines, making it easy to count the trapped pests. This allows for timely detection of population growth and quick implementation of plant protection measures.
For the most effective control, we recommend:

• Bioleat
• Expelex

Instructions for use:
Place the trap 30 cm above the plant tops.
Use more traps per m² for better results.
Effectiveness: 6 to 8 weeks.

VENTS RSA5E-4-M is a professional 5-step transformer speed controller designed to control single-phase AC fans with a maximum rated current of up to 4 A. The speed is selected using a mechanical rotary switch, while autotransformer control ensures stable and reliable motor operation. The model has built-in motor-overheating protection and can be connected to a thermostat and air-damper actuator.

VENTS RSA5E-4-M is designed to regulate the airflow of compatible single-phase fans by changing the motor speed. Unlike conventional electronic controllers, the model uses a transformer control principle and offers five predefined operating steps.

The desired speed is set using a mechanical rotary switch on the front panel. This makes control easy and allows the airflow to be adapted to the specific needs of the ventilation system – for example, a lower speed under normal conditions and a higher speed when intensive air exchange is needed.

One of the important advantages of the RSA5E-4-M is its integrated motor protection. The controller can operate with the thermal contacts of a compatible fan. If the motor's thermal relay is triggered because of overheating, power to the fan is interrupted. Once conditions return to normal, the power supply is restored automatically.

It also has additional terminals for connecting an external thermostat or air-damper motor, allowing the controller to be integrated into more complex climate-control and ventilation installations.

The RSA5E-4-M has a metal casing and is designed for surface wall mounting. Its protection rating is IP21, and the permitted ambient operating temperature is from +5°C to +40°C.

Technical specifications

✔️ Manufacturer: VENTS
✔️ Model: RSA5E-4-M
✔️ Type: Transformer speed controller
✔️ Control: Stepped
✔️ Number of speeds: 5
✔️ Phases: 1
✔️ Supply voltage: 230 V / 50 Hz
✔️ Rated motor voltage: 230 V / 50 Hz
✔️ Maximum rated load: 4.0 A
✔️ Fuse: 5.0 A
✔️ Protection rating: IP21
✔️ Operating temperature: +5°C to +40°C
✔️ Casing: Metal
✔️ Mounting: Surface wall mounting
✔️ Dimensions: 241 × 184 × 132 mm
✔️ Weight: 4.5 kg
✔️ Terminals: screw type, 0.5–2.5 mm².

🛡️ Functions and protections

RSA5E-4-M offers more than ordinary speed control:

✔️ 5-step adjustment of the fan speed
✔️ Mechanical rotary switch
✔️ Integrated motor overheat protection
✔️ Automatic power restoration after the temperature returns to normal
✔️ Option to connect a thermostat
✔️ Option to control an air-damper actuator.

🔧 Applications

VENTS RSA5E-4-M is suitable for controlling compatible single-phase fans in:

• Greenhouses
• Nurseries
• Warehouses
• Production facilities
• Workshops
• Technical rooms
• Supply ventilation systems
• Extract ventilation systems
• Other professional systems where stepped air-flow control is required.

🔌 Operating principle

When a different position is selected on the rotary switch, the controller supplies a different voltage to the fan motor. In this way, the speed and therefore the air flow change in five distinct stages.

This type of control is particularly suitable for compatible AC motors when reliable adjustment is required without the need for complex electronics.

📋 Installation and use

1. Mount the controller vertically on a stable wall.
2. Connect the power supply and fan to the corresponding terminals according to the VENTS wiring diagram.
3. If the motor has suitable thermal contacts, connect them to the controller's protection circuit.
4. If necessary, connect an external thermostat or air-damper actuator.
5. After checking the electrical installation, switch on the power supply.
6. Select the required speed using the rotary switch.

⚠️ Important: The maximum rated load of the RSA5E-4-M is 4.0 A. Before connection, the fan motor's rated current and its compatibility with transformer control must be checked. Electrical connection should be carried out according to the manufacturer's diagram and requirements.

💡 Tip from Urban Botaniks: A transformer controller is a good choice for ventilation systems where the fan does not need to run constantly at maximum speed. Selecting a suitable lower stage can reduce air flow and noise, while maximum speed remains available for periods when more intensive air exchange is needed.

CAN-LITE 300, 300 m³/h filter

CAN-LITE 300PL is an activated carbon filter for air purification. Thanks to its lightweight carbon, the carbon filters in the LITE series are more practical and easy to use. 

• capacity: 300m³/h
• optional flange: ⌀ 100 / 125 mm
• plastic housing
• lightweight CKG 48 carbon
• activated carbon bed thickness: 2.5 cm
• lightweight filter with a minimum 18-month lifespan*
• weight: 1.8 kg

Absorbs odorous and/or hazardous gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Catalytically decomposes ozone. Not designed to filter dust, fine particulate matter, or smoke! Installed at the start of the air handling system (before the fan).

Advantages:

• easy to use and install
• original mesh structure for efficient airflow
• multi-layer pre-filter for better carbon protection
• maximum activated carbon per cm² for better adsorption

Full technical specifications:

• capacity: 300m³/h
• plastic housing
• optional flange: ⌀ 100 / 125 mm
• length: 45 cm
• diameter: 14.5 cm
• weight: 1.8 kg
• amount of activated carbon: 1.2 kg
• activated carbon bed thickness: 2.5 cm
• activated carbon type: Lite CKG 48
• minimum 18-month lifespan*

*When used in a working environment with relative humidity below 70% and temperatures up to 80°C!

Rope Ratchet Neptune – accessory

Rope Ratchet is asuspension system for reflectors. It allows you to quickly and easily adjust the height of the lights.

• supports up to 68 kg.
• when pulled tight, the Rope Ratchet ropes lock in place and cannot slip; the housing cannot break or rust - made from a special composite material
• heat- and cold-resistant
• the set includes 2 x 1.6 m polypropylene ropes
• the set includes 4 carabiners

CAN-LITE 1000, Ø200 mm filter

CAN-LITE 1000/200 is an activated carbon filter for air purification. Thanks to its lightweight carbon, LITE series carbon filters are more practical and easy to use. 

• capacity: 1000 m³/h
• flange: ⌀ 200 mm
• steel housing
• lightweight CKG 48 carbon
• activated carbon bed thickness: 5 cm
• lightweight filter with a minimum 18-month lifespan*
• weight: 11 kg

Absorbs odorous and/or hazardous gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Catalytically decomposes ozone. Not intended for filtering dust, fine particles, or smoke! Installed at the beginning of the air handling system (before the fan).

Advantages:

• easy to use and install
• original mesh structure for efficient airflow
• multilayer pre-filter for better carbon protection
• maximum amount of activated carbon per cm² for better adsorption

Full technical specifications:

• capacity: 1000 m³/h
• steel housing
• flange: ⌀ 200 mm
• length: 50 cm
• diameter: 30 cm
• weight: 11 kg
• activated carbon quantity: 5.1 kg
• activated carbon bed thickness: 5 cm
• activated carbon type: Lite CKG 48
• minimum 18-month lifespan*

*When used in an operating environment with less than 70% relative humidity and a temperature up to 80°C!

Cornwall Electronics is a speed controller that reduces the speed of a compatible fan using a rotary knob.

Features and functions

• Power supply: 230 V, 50 Hz.
• Maximum power rating: 280 W.
• Maximum current rating: 1.6 A.

Check that the motor is compatible with this control method and observe both the current and power limits. Do not set a speed at which the motor cannot run steadily.

Choosing a climate controller

Match the load type to the control method. An AC fan with adjustable voltage and an EC fan with a signal input require different controls. Follow the limitations of the specific model.

View ventilation and climate controllers.

CAN-LITE 425S, 425 m³/h carbon filter

CAN-LITE 425S is an activated carbon filter for air purification. Thanks to its lightweight carbon, the carbon filters in the LITE series are more practical and easy to use. 

• capacity: 425 m³/h
• flange: ⌀ 150 mm
• steel body
• lightweight CKG 48 carbon
• activated carbon bed thickness: 2.5 cm
• lightweight filter with a minimum 18-month lifespan*
• weight: 4 kg

Absorbs odorous and/or hazardous gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Catalytically decomposes ozone. Not designed to filter dust, fine particles, or smoke! Installed at the beginning of the air duct system (before the fan).

Advantages:

• easy to use and install
• original mesh structure for efficient airflow
• multilayer pre-filter for better carbon protection
• maximum amount of activated carbon per cm² for better adsorption

Full technical specifications:

• capacity: 425 m³/h
• steel body
• flange: ⌀ 150 mm
• length: 35 cm
• diameter: 20 cm
• weight: 4 kg
• amount of activated carbon: 1.9 kg
• activated carbon bed thickness: 2.5 cm
• activated carbon type: Lite CKG 48
• minimum 18-month lifespan*

*When used in a working environment with relative humidity below 70% and temperatures up to 80°C!

Cornwall temperature controller, ideal for stabilizing the temperature of your crop. It can be used with an air conditioner or other heating appliances (heaters), depending on the selected function.

• Voltage: 230V AC/50HZ
• Maximum load: 16A 3680W
• Inductive load (exhaust fan): 2A 460W 
• Operating temperature: 0°C - 40°C
• Storage temperature: -10°C - 50°C
• Controlled temperature: 5°C - 30°C / 40°F - 85°F
• Accuracy: ±1°C / ±3°F
• Reading interval: 10 sec

Please read the instructions before use:

• Before setting the temperature, select the operating mode - cooling (snowflake icon) or heating (flame icon). In "cooling" mode, the unit supplies power when the temperature exceeds the set value; in "heating" mode, it supplies power when the temperature drops below the set value. To change the operating mode - press ON/OFF and "up arrow" together for 3 seconds.
• To switch between °C and °F - press the "up arrow" and "down arrow" together for 3 seconds
• Default setting - cooling; 20°C
• Setting the temperature - press ON/OFF

Cooling mode:

• Use the arrows to set the "SET" temperature at least 2° below the "RM" temperature (the current measured temperature). After a few minutes, the indicator will glow green and the controller will start supplying power.
• When the "RM" temperature reaches the "SET" temperature, the indicator will glow red and the snowflake icon will disappear from the screen; the controller will stop supplying power.
• When the "SET" temperature is above the "RM" temperature, the indicator will glow red and the controller will not supply power.

Heating mode:

• Use the arrows to set the "SET" temperature at least 2° above the "RM" temperature (the current measured temperature). After a few minutes, the indicator will glow green and the controller will start supplying power.
• When the "RM" temperature reaches the "SET" temperature, the indicator will glow red and the flame icon will disappear from the screen; the controller will stop supplying power.
• When the "SET" temperature is below the "RM" temperature, the indicator will glow red and the controller will not supply power.

Important:

• Do not connect a power strip after the controller!
• Do not connect devices that transmit vibrations to the controller!
• Ensure the safety of heating and moving appliances!
• Protect from moisture, extreme temperatures, impacts, and vibrations!
• Use indoors only; do not expose to sunlight!
• Keep out of reach of children!

Charge the battery when the device displays "LO" - by plugging the device into the socket!

Distinguish between the maximum load of 16 A / 3680 W and the specified inductive load of 2 A / 460 W. For a motor, compressor, or other inductive appliance, observe the lower permissible limit.

Choosing a climate controller

Match the load type to the control method. An AC fan with adjustable voltage and an EC fan with a signal input require different controls. Follow the limitations for the specific model.

Browse ventilation and climate controllers.

BioBizz Coco Mix 50 L – coconut substrate

BioBizz Coco - Mix 50 L is an organic coconut substrate.

• made from 100% organic coconut fibers
• Works as a replacement for rockwool for growing all types of hydroponic crops
• For seedlings, young plants and cuttings
• Improves quality and final yield

• EC: 0.2
• pH: 6.8
• volume: 50 L

What is Coco - Mix?

• No, we're not talking about chocolate bars - but Biobizz Coco - Mix is perhaps the best 100% organic coconut product on the market. It's made from waste materials left over from the coconut industry, which have proven to be an ideal growing medium for plants. To become this well-known substrate, the coconut fibers are first left to decompose for a certain period of time to soften the strong fibers. Then they're rinsed with clean water, dried and shredded to create a light, airy Coco - Mix - which contains little moisture and has a low pH of 5 or 6.

How do you use it?

• Coco - Mix works well in pots as a rockwool substitute for growing all types of hydroponic crops - simply fill small pots with Coco - Mix. It is compatible with all types of nutrients and can be used to refresh All - Mix or other soil mixes, and with your usual A + B range to improve aeration. Combine it with Biobizz products such as Root - Juice, Bio - Bloom, Top - Max and Bio - Heaven, and look forward to improved quality and increased yields from your plants.