AutoPot fittings

AutoPot 4mm cross connector supplied individually and used to connect four pieces of pipe together, they are useful along with the AutoPot 4mm Tee as they provide the user with the ability to create a layout to suit his or her needs.

These connectors are perfect for reducing 13mm pipe down to 4mm pipe, when using large systems. They are inserted in-line at the point where an AQUAvalve or aquaPot is positioned. They provide a water tight connection unlike many other types of reduction fittings.

AutoPot 13mm Double Barb Tee connectors are simply used to connect three pieces of 13mm pipe (hosepipe) together.

These connectors are perfect for reducing 13mm pipe down to 6mm pipe, when using large systems. They are inserted in-line at the point where an AQUAvalve or aquaPot is positioned. They provide a water tight connection unlike many other types of reduction fittings. They work in exactly the same way as the AutoPot Cross Connector 13mm to 4mm  but this fitting has one connection for 4mm pipe whereas the cross connector provides two connections for 4mm pipe.

AutoPot 4mm In-Line Taps are a very useful accessory. They can be inserted in-line just after the connection to the 30 or 47 ltr tanks. Allowing you to turn off the water supply if you need to undertake any maintenance. They can also be added to the end of a layout so that now and again you can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks.
Please note that this product is sold individually.

AutoPot 13mm In-line taps are a very useful accessory. They can be added to the end of a layout when you are using hosepipe (13mm pipe). You can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks.

AutoPot 13mm End plug are used to cap the end of a supply line when using 13mm pipe (hosepipe).

• These grommets can be used to replace old, worn top hat grommets in your hydroponic system and can be a valuable solution when building your own garden system
• Top Hat grommets have a straight side wall for easy installation
• 6mm opening

Good for 13mm pipe.

PotSocks have been designed to keep even the most agile root system where it belongs… contained in the pot! 

Enjoy complete peace of mind that your AQUAvalve is safe and free from rogue roots.

Used to prevent blockages in autopots and drippers, a filter is a must on any irrigation system.

13mm Cross Connector

• A replacement 15ltr square pot to fit AutoPot easy2grow and 1Pot modules and systems. 
• We recommend fitting PotSock Square to the base of 15ltr Pots for superior root control.

• A replacement 1Pot Tray and Lid as supplied with AutoPot 1Pot modules and systems. The 1Pot Tray and Lid accepts an 8.5ltr or 15ltr Square Pot (pots not included).
• The tray requires an AQUAvalve and fittings (not included) to function as part of an AutoPot Watering System.
• We recommend using PotSock Squares (not included) on the bases of your pots to prevent your plant’s roots from impairing the performance of the AQUAvalve.

Marix Discs are designed to fit the 1Pot system, the easy2grow Kit & the 2Pot extension trays to extend the easy2grow Kit.

The purpose of the Marix Disc is to prevent compost or soil from leaving the pot, keeping the system clean & the AQUAvalve free from debris.

The Root Control Discs or RCD™s are designed to fit the 1Pot system, the easy2grow Kit & the 2Pot extension trays to extend the easy2grow Kit.

These discs are black & gold in colour and are placed in the tray underneath the pot, gold face up.

The purpose of the Root Control Disc is to prevent roots from leaving the pot & heading towards the AQUAvalve.