Home 
New products 
Promotions 
Contact Us 
Promotion
Grow tents
Grow Lights
Ventilation and Climate
Roothold and growing media
Soil and Pots
Nutrients and Supplements
Hydroponics and Irrigation systems
Timers and Controllers
Measuring devices
Scissors and Trimmers
Machines and Devices
Aaccessories
Presents
Seeds
LUMATEK 1000W 240V CONTROLLABLE BALLAST
LUMATEK 100W 240V CONTROLLABLE BALLAST is a digital ballast that can work with both sodium (HPS) and metal halide (MH) lamps. It provides a stable and precise voltage to the lamp, creating a higher PAR/PPF emission and yet is much more energy efficient than most ballasts on the market! The ballast features "smart start" technology and a soft dimming mechanism! External control is possible with LUMATEK Control Panel Plus 2.0 (sold separately).
- output power: 1000W
- dimmable / 4 working modes: 600W - 750W - 1000W - 1000W SL
- generates very little heat compared to other ballasts on the market
- silent work
- Protections: full circuit protection - open / short; over temperature; over / low voltage; end of lamp life / rectification
- 5 years warranty!
- Brand:LUMATEK
- Code:2308
- Weight:4.500 Kgs
Estimated Shipping
to Plovdiv starts at €3.10outside Plovdiv starts at €3.20
to Sofia starts at €2.60outside Sofia starts at €2.60
Digital ballasts are the solution to the problem of the irregular voltage of the power grid! Magnetic ballasts age over time, start to make noise and consume more electricity, heat up more and more, at the expense of decreasing luminosity. With digital ballasts, this does not happen - they maintain the same level of radiation and efficiency. LUMATEK ballasts are programmed for "soft start" - voltage and current peak are not needed to start the lamp, which extends the life of the bulb, does not load the electrical installation and allows safe starting of a larger number of chokes at the same time.
Full technical specifications:
- output power: 1000W
- voltage: 240V, 50/60Hz
- max. current: 4.7A
- power factor: > 0.99
- THD: < 10%
- dimmable / 4 working modes: 600W - 750W - 1000W - 1000W SL
- can work with: 600W, 750W, 1000W HPS / MH lamps
- operating frequency: high frequency
- generates very little heat compared to other ballasts on the market
- silent work
- Protection against: short circuit, overheating, overvoltage / low voltage, end of lamp life!
- dimensions: 310 x 114 x 81mm
- weight: 4.25kg
- warranty: 5 years
Operating instructions:
- for operation with a 250W HPS or MH lamp: The ballast must work always and only in 250W mode!
- to work with a 400W HPS or MH lamp: The ballast must never work in 600W or 660W mode!
- to work with a 600W HPS or MH lamp: Start in 600W mode and only after the lamp is fully warmed up (about 10 min. operation) you can switch to 660W mode!
- Turn off the power when changing the lamp!
- LUMATEK recommends changing the lamp after 6-12 months of operation!
- It is VERY IMPORTANT that the lamp cools down completely (20-30 min.) before turning it on again! (The opposite shortens the life of the lamp).
- Also, the lamp should not be turned off before it has reached full power!
