Home 
New products 
Promotions 
Contact Us 
Promotion
Grow tents
Grow Lights
Ventilation and Climate
Roothold and growing media
Soil and Pots
Nutrients and Supplements
Hydroponics and Irrigation systems
Timers and Controllers
Measuring devices
Scissors and Trimmers
Machines and Devices
Aaccessories
Presents
Seeds
Milwaukee MW802 Smart Portable pH/EC/TDS meter - a portable device for measuring pH/EC/TDS
This 3-in-1 combination meter from Milwaukee allows you to measure pH, EC (electrical conductivity) and TDS with one meter and one probe.
ACCURACY:
±0.2 pH |
±2% full scale EC/TDS
SCOPE:
0.00-14.00 pH |
0.00-6.00 mS/cm |
0-4000 ppm
CALIBRATION:
manual, single point
ACCURACY:
±0.2 pH |
±2% full scale EC/TDS
SCOPE:
0.00-14.00 pH |
0.00-6.00 mS/cm |
0-4000 ppm
CALIBRATION:
manual, single point
- Brand:Milwaukee
- Code:611170
- Weight:1.000 Kgs
Quick Buy
Just 2 fields to fill in
Price: €259.07
Estimated Shipping
to Plovdiv starts at €2.15outside Plovdiv starts at €2.25
to Sofia starts at €2.17outside Sofia starts at €2.17
The design of the MW802 is focused on ease of operation and robustness. With one probe, large screen, easy calibration, MW802 is extremely easy to operate.
Factory calibrated with simple, single-point manual calibration for pH and EC.
Specialized design for hydroponic, aquaponic and greenhouse growers.
The MW802 PRO combination meter includes a pH and EC sensor in the integrated SE600 probe. All pH sensors have a limited life and response time increases with age. EC sensors are more robust but can still be affected by debris build-up. Both need maintenance. Proper maintenance of the probe will give you fast and accurate results for a longer time. So be sure to order the Milwaukee pH Maintenance Kit during checkout! It will be needed to help clean and condition the pH/EC electrode before use!
Store the pH probe in storage solution MA9015. Use only tap water for short periods if MA9015 is not immediately available, and NEVER store in distilled (DI) or reverse osmosis (RO) water. This will damage the sensitivity of the probe.
1. Always store MA9015 Storage Solution fully capped for BEST RESULTS.
2. Clean your probe regularly by soaking it in cleaning solution MA9016.
3. Calibrate after cleaning and/or storage before testing to correct for pH and EC sensor changes.
4. Gently stir the probe into the sample for a faster result.
Factory calibrated with simple, single-point manual calibration for pH and EC.
Specialized design for hydroponic, aquaponic and greenhouse growers.
The MW802 PRO combination meter includes a pH and EC sensor in the integrated SE600 probe. All pH sensors have a limited life and response time increases with age. EC sensors are more robust but can still be affected by debris build-up. Both need maintenance. Proper maintenance of the probe will give you fast and accurate results for a longer time. So be sure to order the Milwaukee pH Maintenance Kit during checkout! It will be needed to help clean and condition the pH/EC electrode before use!
Store the pH probe in storage solution MA9015. Use only tap water for short periods if MA9015 is not immediately available, and NEVER store in distilled (DI) or reverse osmosis (RO) water. This will damage the sensitivity of the probe.
1. Always store MA9015 Storage Solution fully capped for BEST RESULTS.
2. Clean your probe regularly by soaking it in cleaning solution MA9016.
3. Calibrate after cleaning and/or storage before testing to correct for pH and EC sensor changes.
4. Gently stir the probe into the sample for a faster result.
