TechGrow

TechGrow - Temperature Probe Sensor (5m) is the simplest TechGrow sensor that measures temperature. Compatible with various TechGrow devices.

• measures the temperature
• cord length: 5m

TechGrow - CO₂ Pressure Reducing Valve the easiest and most effective way to inject CO₂ in the growroom. Connect it to the CO₂-bottle to control the flow of CO₂ in the room. Use in combination with TechGrow - CO₂ Controllers. The product consists of:

• pressure meter
• flow meter
• electric magnetic valve

TechGrow Sensor Temp/RH  measures temperature, humidity (RH) and detects light simultaneously. These values are shown on the display of your controller. TechGrow Sensor Temp/RH can be connected to various devices. Depending on your TechGrow controller, the sensor will control temperature and/or humidity. The built-in light sensor can be switched off when using a S-2 sensor or a T-Mini CO₂ controller.

TechGrow - Clima Eco 5A (Minimum speed) controls the minimum fan speed until the desired temperature in the growroom is reached or maintained. This budget controller is easy to operate with - there are only two rotary knobs - to set the minimum fan speed and the desired room temperature.

• Controls the minimum fan speed until the desired temperature is reached or maintained
• Minimum fan speed setting range: 10% - 100%
• Temperature setting range: 15° - 35°C
• Hysteresis: 2°C
• Minimum required sensor: TempProbe (not included)

TechGrow - Clima Micro Day / Night Fan Controller 5A is a controller that regulates the speed of your fan in two operating modes - day and night. You can easily set the desired speed with the rotary knobs, as well as a delay time of 0 to 10 minutes. The controller does not connect to a sensor and does not measure CO2, temperature or humidity!

• Very easy to use
• Adjustable fan speed for day and night mode
• Adjustable delay time up to 10 minutes
• Built-in light sensor

TechGrow Clima Eco 5A (Temp-RH) controls the minimum fan speed until the desired temperature and relative humidity in the growroom are reached or maintaned. This budget controller is easy to operate with - there are only three rotary knobs - to set the minimum fan speed, for the value of relative humidity and for the desired room temperature.

• Controls the minimum fan speed until the desired temperature and relative humidity are reached or maintaned
• Minimum fan speed setting range: 10% - 100%
• Relative humidity setting range: 40% - 90%
• Temperature setting range: 15° - 35°C
• Hysteresis: 2°C
• Minimum required sensor: Sensor Temp / RH (not included)

The Humi Heavy is specially designed for controlling powerful dehumidifiers. Thanks to the extra heavy components, this controller can switch devices up to 10А.

• Power supply: 100 to 240V
• Mains frequency: 50 to 60Hz
• Own Consumption: 3W
• Switching capacity: 2300W / 10A
• Setting range RH set: 10 – 90% R.H.
• Setting range RH +/-: 0 – 5% air humidity

TechGrow - Clima Micro Plus 5A (Min speed) controls the minimum fan speed until the desired temperature in the growroom is reached or maintained. This efficient controller is easy to operate - there are only two rotary knobs - to set the minimum fan speed and the desired room temperature. There is also an option to adjust the hysteresis (1°C - 5°C).

• Controls the minimum fan speed until the desired temperature is reached or maintained
• The display shows the current temperature as well as the set temperature, fan speed, minimum and maximum measured temperature and hysteresis
• The LED indicates a stable climate or high temperature
• Minimum fan speed setting range: 10% - 100%
• Temperature setting range: 15°C - 35°C
• Hysteresis setting range: 1°C - 5°C
• Minimum required sensor: TempProbe (not included)

TechGrow Clima Control ECO 8A can control up to 2 fans and precisely creates the desired climate in your indoor garden. It accelerates more slowly than other controllers to achieve a more stable climate. With the rotary knobs, you can easily set the desired temperature and hysteresis, as well as the minimum and maximum fan speed.

key functions:

• controls and displays: temperature
• day/night detection: no
• light sensor: no
• heater relay: no
• temperature alarm: no

software functions:

• temp. range: 10 - 45°C
• temp. hysteresis: 0 - 7°C
• temp. settings: day
• humidity settings: no
• day/night delay: no
• min. max. values: no

power supply

• power supply: 100 - 240V
• consumption: 3W
• fuse: 8A
• max. load: 1700W
• power cable: 3 x 1.5 / 1.7m

The Day/Night Fan Controller 7A is the easiest to use climate control device by TechGrow for your indoor garden. The controller is very efficient and fully 'plug & play' (just connect it to the mains and turn it on). To adjust the day and night speeds of your fan, you can use the two rotary knobs, and the settings will switch automatically thanks to the built-in light sensor.

key functions:

• controls: fan speed
• display: no
• day/night detection: yes
• light sensor: yes, built-in
• thermal relay: no
• temperature alarm: no

power supply:

• input: 100 - 220V
• consumption: 3W
• fuse: 8A
• triac: 12A
• power cable: 3 x 0.75 / 1.7m

Note: no connection for sensors available!

TechGrow Clima Control ECO 15A can control up to 2 fans and precisely creates the desired climate in your indoor garden. It accelerates more slowly than other controllers to achieve a more stable climate. With the rotary knobs, you can easily set the desired temperature and hysteresis, as well as the minimum and maximum fan speed.

key functions:

• controls and displays: temperature
• day/night detection: no
• light sensor: no
• heater relay: no
• temperature alarm: no

software functions:

• temp. range: 10 - 45°C
• temp. hysteresis: 0 - 7°C
• temp. settings: day
• humidity settings: no
• day/night delay: no
• min. max. values: no

power supply

• power supply: 100 - 240V
• consumption: 3W
• fuse: 15A
• max. load: 3400W
• power cable: 3 x 1.5 / 1.7m

The Day/Night Fan Controller 14A is the easiest to use climate control device by TechGrow for your indoor garden. The controller is very efficient and fully 'plug & play' (just connect it to the mains and turn it on). To adjust the day and night speeds of your fan, you can use the two rotary knobs, and the settings will switch automatically thanks to the built-in light sensor.

key functions:

• controls: fan speed
• display: no
• day/night detection: yes
• light sensor: yes, built-in
• thermal relay: no
• temperature alarm: no

power supply:

• input: 100 - 220V
• consumption: 3W
• fuse: 15A
• triac: 24A
• power cable: 3 x 1.5 / 1.7m

Note: no connection for sensors available!

Control the climate in your grow room effectively with TechGrow’s Clima Control 7A.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 7 Amp / 1700W
• Adjustment range ТМР: 10 - 50°C
• Adjustment range ТМР hyst +/-: 0 - 5°C
• Adjustment range temperature offset: -5 to + 5°C 

Controlling the climate in your grow room with the TechGrow Clima Control Basic Plus 7A is simple but effective.

• Power supply: 100 to 240V
• Net frequency: 50 to 60Hz
• Consumption: 3W (excluding fan)
• Maximum capacity fan: 7 Amp / 1700W
• Adjustment range ТМР set: 10 - 45°C
• Adjustment range ТМР hyst +/-: 1 -7°C
• Probe: comes with a pre-mounted temperature probe on a 4.5m (15ft) cable

Effectively control the climate in your grow room with TechGrow’s Clima Control Plus 7A - both day and night.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 7 Amp / 1700W
• Adjustment range TMP set: 0 - 50°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Adjustment range temperature offset: -5 to +5°C

Controlling the climate in your grow room with the TechGrow Clima Control Basic Plus 14A is simple but effective.

• Power supply: 100 to 240V
• Net frequency: 50 to 60Hz
• Consumption: 3W (excluding fan)
• Maximum capacity fan: 14 Amp / 3400W
• Adjustment range ТМР set: 10 - 45°C
• Adjustment range ТМР hyst +/-: 1 -7°C
• Probe: comes with a pre-mounted temperature probe on a 4.5m (15ft) cable

Effectively control the climate in your grow room with TechGrow’s Clima Control Plus 14A - both day and night.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 14 Amp / 3400W
• Maximum heater capacity: 14 Amp / 3400W
• Maximum total capacity: 16A
• Adjustment range TMP set: 0 - 50°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Adjustment range temperature offset: -5 to +5°C

Control the climate in your grow room effectively with TechGrow’s Clima Control 14A.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 14 Amp / 3400W
• Adjustment range TMP: 10 - 50°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Adjustment range TMP offset: -5 to + 5°C 

TechGrow S-2 CO2 Sensor (2000ppm) measures CO₂ and detects light. It is compatible with all TechGrow controllers. The sensor is equipped with a built-in calibration function so you can calibrate the CO₂ sensor against outdoor air. The calibration menu is only accesible through a CO₂ controller. Also equipped with a built-in switch to prevent unwanted calibration. 

• range: 0 - 2000 ppm

TechGrow S-4 CO2 Sensor (2000ppm) is the all-in-one sensor measures CO₂, temperature, humidity and detects light simultaneously. Also, the sensor is equipped with a built-in calibration function to calibrate the CO₂ sensor against outdoor air. The calibration menu is only accesible through a CO₂ controller. Also equipped with a built-in switch to prevent unwanted calibration.

• range: 0 - 2000 ppm

The TechGrow T-Nano CO₂ Controller ECO is a powerful and easy-to-use CO₂ regulator from TechGrow's budget series - ECO. The T-Nano performs extremely accurate measurements regardless of the size of your indoor grow room - from small tents to very large spaces. When connected to the TechGrow S-4 sensor, the T-Nano can facilitate connection to another TechGrow controller.

key functions:

• controls: CO₂
• measures: CO₂
• PPM range: 300 - 2000ppm
• day/night detection: yes
• light sensor: in the CO₂ sensor

power supply:

• input: 100/240V, 50/60 Hz
• CO₂ output power: 100 – 220V
• consumption: 3W
• CO₂ relay: 8A
• CO₂ fuse: 4A
• power cable: 3 x 0.75 / 1.7m

Note: the sensor is sold separately!

TechGrow T-Micro CO₂ Controller is the smallest TechGrow controller. A complete and very easy to operate CO₂ controller. Best in its class thanks to its completely digital technique.

• Power supply: 100 to 240V (automatic)
• Power frequency: 50 to 60Hz
• Consumption: 3W (with sensor, without CO₂-source)
• Adjustment range CO₂ set: 300 to 2000ppm
• Adjustment range CO₂ +/-: 20 to 200ppm (advice 50 ppm)
• Measurement time: 1 measurement per second
• Cable: UTP network 5m included

Note: the sensor is sold separately!

This completely redesigned controller is just as easy to use as the other TechGrow devices with which it is compatible. The TechGrow T-1 Pro CO₂ Controller measures and controls the CO₂ value in an area. It automatically switches between day and night modes by means of the external sensor.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without CO₂ source)
• Adjustment range CO₂ set: 300 to 2000ppm
• Adjustment range CO₂ +/-: 20 to 200 ppm (advice 50 ppm)
• (hysteresis/bandwidth)
• Measurement interval: 1 measurement per second

Note: the sensor is sold separately!

TechGrow T-2 Pro CO₂ Controller7A is an unparalleled device that controls the CO₂ value, temperature and humidity in your growing area.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without CO₂ source)
• Maximum power fan: 7 Amp / 1700W
• Adjustment range CO₂ set: 300 to 2000ppm
• Adjustment range CO₂ +/-: 20 to 200ppm (advice 50ppm)
• Adjustment range RH set: 10% - 90% RH 
• Adjustment range RH +/-: 0% - 10% RH 
• Adjustment range TMP set: 0 - 45°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Measurement interval: 1 measurement per second

Note: the sensor is sold separately!

This completely redesigned controller is now easier to use and compatible with many other TechGrow products. TechGrow T-Mini Pro CO₂ Controller measures, controls and displays the CO₂ value and registers min/max values. It come with a built-in light sensor to automatically switch between day and night modes. There is no CO₂ dispensing during the night.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without CO₂ source)
• Adjustment range CO₂ set: 300 to 2000ppm
• Adjustment range CO₂ +/-: 20 to 200ppm (advice 50 ppm)
• (hysteresis/bandwidth)
• Measurement interval: 1 measurement per second

Note: the sensor is sold separately!

TechGrow T-2 Pro CO₂ Controller 14A is an unparalleled device that controls the CO₂ value, temperature and humidity in your growing area.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without CO₂ source)
• Maximum power fan: 14 Amp / 3400W
• Maximum power CO₂ source: 6A / 1500W
• Maximum total power: 16A
• Adjustment range CO₂ set: 300 to 2000ppm
• Adjustment range CO₂ +/-: 20 to 200ppm (advice 50ppm)
• Adjustment range RH set: 10% - 90% RH 
• Adjustment range RH +/-: 0% - 10% RH 
• Adjustment range TMP set: 0 - 45°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Measurement interval: 1 measurement per second

Note: the sensor is sold separately!